2002 Ford Crown Victoria Owners Manual

Table of Contents

Introduction

Instrument Cluster

Warning and control lights Gauges

Entertainment Systems

AM/FM stereo AM/FM stereo cassette AM/FM stereo with CD AM/FM stereo cassette (CD changer compatible) CD changer

Climate Controls

Manual heating and air conditioning Electronic automatic temperature control

Lights

Headlamps Turn signal control Bulb replacement Driver Controls

Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors Speed control Message center

Locks and Security

Keys Locks Anti-theft system

10

10
17
22

22
26
33
39
49
54

54
56
63

63
65
65
72

72
73
74
75
79
83
91

91
91
93

Table of Contents

Seating and Safety Restraints

Seating Safety restraints Air bags Child restraints

Driving

Starting Brakes Traction control/AdvanceTrac Air suspension Transmission operation Vehicle loading Trailer towing Recreational towing

Roadside Emergencies

Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Jump starting Wrecker towing

Customer Assistance

The dispute settlement board Utilizing the mediation/arbitration Getting assistance outside the U.S. and Canada Ordering additional owner’s literature Reporting safety defects (U.S. only)

104

104
108
122
127
137

137
141
144
146
146
151
152
155
156

156
157
158
159
164
169
174
175

178
180
181
182
183

Cleaning

Cleaning your vehicle Underbody preservation

Maintenance and Specifications

Hood Engine compartment Engine oil Battery Fuel information Air filter(s) Part numbers Refill capacities Lubricant specifications Engine data Vehicle dimensions

Accessories

Index

Table of Contents

184

184
189
191

192
192
193
197
206
219
224
225
226
228
228
231

233

All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation.

Copyright © 2002 Ford Motor Company

Introduction

The following warning may be required by California law: CALIFORNIA Proposition 65 Warning

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to

the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

CONGRATULATIONS Congratulations on acquiring your new Ford. Please take the time to get well acquainted with your vehicle by reading this handbook. The more you know and understand about your vehicle the greater the safety and pleasure you will derive from driving it. For more information on Ford Motor Company and its products visit the following website: • In the United States: www.ford.com • In Canada: www.ford.ca • In Australia: www.ford.com.au • In Mexico: www.ford.com.mx Additional owner information is given in separate publications. This Owner’s Guide describes every option and model variant available and therefore some of the items covered may not apply to your particular vehicle. Furthermore, due to printing cycles it may describe options before they are generally available. Remember to pass on the Owner’s Guide when reselling the vehicle. It is an integral part of the vehicle.

Fuel pump shut-off switch In the event of an accident the safety switch will automatically cut off the fuel supply to the

engine. The switch can also be activated through sudden vibration (e.g. collision when parking). To reset the switch, refer to the Fuel pump shut-off switch in the Roadside emergencies chapter.

Introduction

SAFETY AND ENVIRONMENT PROTECTION

Warning symbols in this guide

How can you reduce the risk of personal injury and prevent possible damage to others, your vehicle and its equipment? In this guide, answers to such questions are contained in comments highlighted by the warning triangle symbol. These comments should be read and observed.

Warning symbols on your vehicle

When you see this symbol, it is imperative that you consult the relevant section of this guide before touching or attempting adjustment of any kind.

Protecting the environment We must all play our part in protecting the environment. Correct vehicle usage and the authorized disposal of waste cleaning and lubrication materials are significant steps towards this aim. Information in this respect is highlighted in this guide with the tree symbol.

BREAKING-IN YOUR VEHICLE There are no particular guidelines for breaking-in your vehicle. During the first 1 600 km (1 000 miles) of driving, vary speeds frequently. This is recommended to give the moving parts a chance to break in.

Introduction

SPECIAL NOTICES

Emission warranty The New Vehicle Limited Warranty includes Bumper-to-Bumper Coverage, Safety Restraint Coverage, Corrosion Coverage, and 7.3L Power Stroke Diesel Engine Coverage. In addition, your vehicle is eligible for Emissions Defect and Emissions Performance Warranties. For a detailed description of what is covered and what is not covered, refer to the Warranty Guide that is provided to you along with your Owner’s Guide.

Special instructions For your added safety, your vehicle is fitted with sophisticated electronic controls.

By operating other electronic equipment (e.g. mobile telephone without exterior aerial) electromagnetic fields can occur which

can cause malfunctions of the vehicle electronics. Therefore you should observe the instructions of the equipment manufacturers.

Please read the section Air bag in the Seating and safety restraints chapter. Failure to follow the specific warnings and

instructions could result in personal injury.

Front seat mounted rear-facing child or baby seats should NEVER be used in front of a passenger side air bag.

Introduction

Notice to owners of natural gas fueled vehicles Before you drive your vehicle, be sure to read the “Natural Gas Vehicle Owner’s Guide Supplement.” This book contains important operation and maintenance information.

Notice to owners of Severe Duty vehicles Before you drive your vehicle, be sure to read the “Severe Duty Owner’s Guide Supplement.” This book contains important operation and maintenance information.

MIDDLE EAST/NORTH AFRICA VEHICLE SPECIFIC INFORMATION For your particular global region, your vehicle may be equipped with features and options that are different from the ones that are described in this Owner Guide; therefore, a supplement has been supplied that complements this book. By referring to the pages in the provided supplement, you can properly identify those features, recommendations and specifications that are unique to your vehicle. Refer to this Owner Guide for all other required information and warnings.

Introduction

These are some of the symbols you may see on your vehicle.

Vehicle Symbol Glossary

Safety Alert

See Owner’s Guide

Fasten Safety Belt

Air Bag-Front

Air Bag-Side

Child Seat

Child Seat Installation Warning

Child Seat Tether Anchorage

Brake System

Anti-Lock Brake System

Brake Fluid - Non-Petroleum Based

Traction Control

AdvanceTrac

Master Lighting Switch

Hazard Warning Flasher

Fog Lamps-Front

Fuse Compartment

Fuel Pump Reset

Windshield Wash/Wipe

Rear Window Defrost/Demist

Windshield Defrost/Demist

Power Windows Front/Rear

Introduction

Vehicle Symbol Glossary

Power Window Lockout

Interior Luggage Compartment Release Symbol

Child Safety Door Lock/Unlock

Panic Alarm

Engine Oil

Engine Coolant

Engine Coolant Temperature

Battery

Do Not Open When Hot

Avoid Smoking, Flames, or Sparks

Battery Acid

Explosive Gas

Fan Warning

Power Steering Fluid

Maintain Correct Fluid Level

MAX MIN

Emission System

Engine Air Filter

Passenger Compartment Air Filter

Jack

Check fuel cap

Low tire warning

Instrument Cluster

WARNING LIGHTS AND CHIMES Warning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’s functions. Many lights will illuminate when you start your vehicle to make sure the bulb works. If any light remains on after starting the vehicle, have the respective system inspected immediately. Standard instrument cluster

OD OFF

60 70

100

120

50

80

80

140

90

0 0 0 0 0 0 0

100

160

0000

200

MPH

km/h

180

110
120

BRAKE

AIR BAG

TEMP

OIL

AIR SUSP

CHECK FUEL CAP

40

60

40

20

30
20
10

TRAC CNTL

LOW FUEL

CHECK ENGINE

VOLTS

FUEL

< FUEL FILL DOOR

Optional instrument cluster

CHECK FUEL CAP

/21

CHECK ENGINE

SPEED CONTROL

km km/h MPH

TRAC CNTL

–

CHECK

AIR SUSPENSION OVERDRIVE OFF

DOOR AJAR

LOW WASHER FLUID TRUNK AJAR DISTANCE TO EMPTY TRIP

TRIP

km MILES /GAL LTR/100 km AVG FUEL ECONOMY AVG SPEED

P R N D 2 1

Check engine Illuminates briefly to ensure the system is functional. If it comes on after the engine is started, one of the engine’s emission control systems may be malfunctioning. The light may illuminate without a driveability concern being noted and will not require towing.

CHECK ENGINE

10

Instrument Cluster

Light turns on solid: Temporary malfunctions may cause your light to illuminate. Examples are: 1. The vehicle has run out of fuel. 2. Poor fuel quality or water in the fuel. 3. The fuel cap may not have been properly installed and securely tightened. These temporary malfunctions can be corrected by filling the fuel tank with high quality fuel of the recommended octane and/or properly installing and securely tightening the fuel cap. After three driving cycles without these or any other temporary malfunctions present, the light should turn off. (A driving cycle consists of a cold engine startup followed by mixed city/highway driving.) No additional vehicle service is required. If the light remains on, have your vehicle serviced at the first available opportunity. Light is blinking: Engine misfire is occurring which could damage your catalytic converter. You should drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced at the first available opportunity.

Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter, the fuel system, interior floor coverings or other vehicle components, possibly causing a fire.

CHECK FUEL CAP

Check fuel cap Illuminates when the fuel cap is not installed correctly. Check the fuel cap for proper installation. When the fuel filler cap is properly re-installed, the light(s) will turn off after a period of normal driving. Continuing to operate the vehicle with the check fuel cap light on, or a mis-installed fuel cap can activate the Service Engine Soon/Check Engine warning light. It may take a long period of time for the system to detect an improperly installed fuel filler cap. For more information, refer to Fuel filler cap in the Maintenance and specifications chapter.

11

Instrument Cluster

Brake system warning • Standard instrument cluster

BRAKE

• Optional instrument cluster To confirm the brake system warning light is functional, it will momentarily illuminate when the ignition is turned to the ON position (alternatively for some vehicles when the ignition is moved from the ON position to START position, the light will momentarily illuminate prior to reaching the START position). It also illuminates if the parking brake is engaged. If the brake system warning light does not illuminate as described, seek service immediately. Illumination after the parking brake is released indicates low brake fluid level or a brake system malfunction and the brake system should be serviced immediately by a qualified technician. Refer to Brakes in the Driving chapter for more information.

ABS

Anti-lock brake system (ABS) (If equipped) To confirm the anti-lock brake system (ABS) warning light is functional it will momentarily illuminate when the ignition is turned to the ON position (alternatively for some vehicles when the ignition is moved from the ON position to the START position, the light will momentarily illuminate just prior to reaching the START position). If the light remains on, continues to flash or fails to illuminate, have the ABS serviced immediately. If the ABS light remains on, it means the anti-lock brake system has malfunctioned and is disabled, however, the normal brake system will still function unless the brake warning light also remains illuminated and parking brake is off. Refer to Brakes in the Driving chapter for more information.

12

Instrument Cluster

AIR BAG

Safety belt Illuminates to remind you to fasten your safety belts. For more information, refer to the Seating and safety restraints chapter.

Air bag readiness Illuminates to confirm that the air bags (front or side) are operational. If the light fails to illuminate, continues to flash or remains on, have the system serviced immediately.

Charging system Illuminates when the battery is not charging properly.

Engine oil pressure (if equipped) Illuminates when the oil pressure falls below the normal range. Check the oil level and add oil if needed. Refer to Engine oil in the Maintenance and specifications chapter.

Engine coolant temperature (if equipped) Illuminates when the engine coolant temperature is high. Stop the vehicle as soon as safely possible, switch off the engine and let it cool.

Never remove the coolant recovery cap while the engine is running or hot.

13

Instrument Cluster

Traction Control姟 active (if equipped) Illuminates when the Traction Control娂 system is active. It will be lit for a minimum of four seconds or for the duration of the Traction Control娂 event. For more information, refer to the Driving chapter.

TRAC CNTL

Air suspension (if equipped) • Standard instrument cluster

• Optional instrument cluster Illuminates when the air suspension switch is turned OFF, the load limit is exceeded or the air suspension system requires servicing.

Low fuel (if equipped) Illuminates when the fuel level in the fuel tank is at, or near empty (refer to Fuel gauge in this chapter for more information).

O/D off • Standard instrument cluster

AIR SUSP

CHECK

AIR SUSPENSION OVERDRIVE OFF

DOOR AJAR

LOW WASHER FLUID TRUNK AJAR

km MILES /GAL LTR/100 km

LOW FUEL

O/D OFF

CHECK

• Optional instrument cluster Illuminates when the overdrive function has been turned OFF using the transmission control switch (TCS). If the light does not come on or the light flashes steadily, have your vehicle serviced as soon as possible, damage to the transmission could occur.

LOW WASHER FLUID TRUNK AJAR

AIR SUSPENSION OVERDRIVE OFF

DOOR AJAR

km MILES /GAL LTR/100 km

14

Instrument Cluster

Turn signals Illuminates when the turn signals or the hazard lights are turned on. If the lights stay on continuously or flash faster, check for a burned-out bulb.

High beams Illuminates when the high beam headlamps are turned on.

Message center indicator lights (if equipped)

Speed control This light comes on when either the SPEED CONTROL SET/ACCEL or RESUME controls are pressed. It turns off when the speed control OFF control is pressed, the brake is applied or the ignition is turned to the OFF position. Doorajar Illuminates when one of the doors is not completely shut and the ignition is turned to ON. With the ignition ON, this light will flash six times (if a door is open). With the ignition in RUN position, a tone will sound for one second (if a door is open).

LOW WASHER FLUID TRUNK AJAR

km MILES /GAL LTR/100 km

AIR SUSPENSION OVERDRIVE OFF

DOOR AJAR

CHECK

Lowwasherfluid Momentarily illuminates when the ignition is turned to ON and will stay on when the windshield washer fluid is low.

CHECK

AIR SUSPENSION OVERDRIVE OFF

DOOR AJAR

LOW WASHER FLUID TRUNK AJAR

km MILES /GAL LTR/100 km

15

Instrument Cluster

Trunkajar If the trunk is not completely closed, this light comes on when you turn the ignition to ON. With the ignition ON, this light will flash five times and sound a tone for one second, then the light remains on (if the trunk is open).

CHECK

AIR SUSPENSION OVERDRIVE OFF

DOOR AJAR

LOW WASHER FLUID TRUNK AJAR

km MILES /GAL LTR/100 km

Safety belt warning chime Sounds to remind you to fasten your safety belts.

BeltMinder姟 chime Sounds intermittently to remind you to fasten your safety belts.

Supplemental restraint system (SRS) warning chime Sounds when a malfunction in the supplemental restraint system (front or side airbags) has been detected. Have the supplemental restraint system inspected immediately.

Headlamps on warning chime Sounds when the headlamps or parking lamps are on, the key is removed from the ignition and the driver’s door is opened.

Key-in-ignition warning chime Sounds when the key is left in the ignition and the driver’s door is opened.

16

Instrument Cluster

GAUGES

Standard instrument cluster gauges

AIR SUSP

CHECK FUEL CAP

40

60

40

20

30
20
10

TRAC CNTL

LOW FUEL

CHECK ENGINE

VOLTS

FUEL

< FUEL FILL DOOR

OD OFF

60 70

100

120

50

80

80

140

90

0 0 0 0 0 0 0

100

160

0000

200

MPH

km/h

180

110
120

BRAKE

AIR BAG

TEMP

OIL

Optional instrument cluster gauges

CHECK FUEL CAP

/21

CHECK ENGINE

SPEED CONTROL

TRAC CNTL

–

km km/h MPH

CHECK

AIR SUSPENSION OVERDRIVE OFF

DOOR AJAR

LOW WASHER FLUID TRUNK AJAR DISTANCE TO EMPTY TRIP

TRIP

km MILES /GAL LTR/100 km AVG FUEL ECONOMY AVG SPEED

P R N D 2 1

Engine coolant temperature gauge Indicates the temperature of the engine coolant. At normal operating temperature, the needle remains within the normal area (the area between the “H” and “C”). If it enters the red section, the engine is overheating. Stop the vehicle as soon as safely possible, switch off the ignition and let it cool. Refer to Engine coolant in the Maintenance and specifications chapter.

Never remove the coolant reservoir cap while the engine is running or hot. Steam and scalding liquid from a hot cooling

system can burn you badly.

17

Instrument Cluster • Standard instrument cluster

• Optional instrument cluster

TEMP

This gauge indicates the temperature of the engine coolant, not the coolant level. If the coolant is not at its proper level the gauge indication will not be accurate. If the gauge enters the red section, the engine coolant and Check Engine/Service Engine Soon indicators illuminate, refer to What you should know about fail-safe cooling in the Maintenance and specifications chapter. Engine oil pressure gauge (if equipped) Indicates engine oil pressure. At normal operating temperature, the needle will be in the normal range (the area between the “L” and “H”); if the needle goes below the normal range, stop the vehicle as soon as safely possible and switch off the engine immediately. Check the oil level. Add oil if needed (refer to Engine oil in the Maintenance and specifications chapter). If the oil level is correct, have your vehicle checked at your dealership or by a qualified technician.

OIL

18

Battery voltage gauge (if equipped) Indicates battery voltage. If the pointer moves and stays outside the normal operating range (as indicated), have the vehicle’s electrical system checked as soon as possible.

Instrument Cluster

VOLTS

Fuel gauge Displays approximately how much fuel is in the fuel tank. The fuel gauge may vary slightly when the vehicle is in motion or on a grade. When refueling the vehicle from empty indication, the amount of fuel that can be added will be less than the advertised capacity due to the reserve fuel. • Standard instrument cluster

• Optional instrument cluster A minimum of four gallons must be added or removed from the fuel tank in order for the gauge to instantaneously update. If less than four gallons is added, the gauge will take between five to ten minutes to update.

FUEL

/21

19

Instrument Cluster

Speedometer Indicates the current vehicle speed. • Standard instrument cluster

• Optional instrument cluster

60 70

100

120

50

80

80

140

90

0 0 0 0 0 0 0

000

MPH

km/h

100

160

180

200

110
120

40

60

40

20

30
20
10

km km/h MPH

Odometer Registers the total kilometers (miles) of the vehicle. • Standard instrument cluster

50

80

40

60

40

20

30
20
10

20

60 70

100

120

80

140

90

0 0 0 0 0 0 0

000

MPH

km/h

100

160

180

200

110
120

• Optional instrument cluster

Instrument Cluster

km km/h MPH

Refer to Electronic Message Center in the Driver controls chapter for information on how to switch the display from metric to English measurements.

Trip odometer Registers the kilometers (miles) of individual journeys. To reset, depress the control.

60 70

100

120

50

80

80

140

90

0 0 0 0 0 0 0

000

MPH

km/h

100

160

180

200

110
120

40

60

40

20

30
20
10

Refer to Electronic Message Center in the Driver controls chapter for Trip A and Trip B features on the optional instrument cluster.

21

Entertainment Systems

AM/FM STEREO

VOL PUSH ON

TONE

CLK

TONE VOL

ST DX FM

12

SEEK

TUNE

AM/FM

Volume/power control Press the control to turn the audio system on or off.

Turn the control to raise or lower volume.

VOL PUSH ON

VOL PUSH ON

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on.

22

Entertainment Systems

Bass adjust The bass adjust control allows you to increase or decrease the audio system’s bass output. Press the TONE control once, then use the volume knob to adjust the desired level.

Treble adjust The treble adjust control allows you to increase or decrease the audio system’s treble output. Press the TONE control twice, then use the volume knob to adjust the desired level.

Speaker balance adjust Speaker sound distribution can be adjusted between the right and left speakers. Press the TONE control three times, then use the volume knob to adjust the desired level.

Speaker fade adjust (if equipped) Speaker sound can be adjusted between the front and rear speakers. Press the TONE control four times, then use the volume knob to adjust the desired level.

TONE

CLK

TONE

CLK

TONE

CLK

TONE

CLK

Seek function The seek function control works in radio mode.

VOL PUSH ON

VOL PUSH ON

VOL PUSH ON

VOL PUSH ON

23

Entertainment Systems

Seekfunctioninradiomode • Press

to find the next listenable station down the frequency band.

• Press

to find the next

listenable station up the frequency band.

AM/FM select The AM/FM select control works in radio mode.

SEEK

TUNE

AM/FM

AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations.

Radio station memory preset

The radio is equipped with four station memory preset controls. These controls can be used to select up to four preset AM stations and eight FM stations (four in FM1 and four in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.

24

Entertainment Systems

Setting the clock Press CLK to toggle between listening frequencies and clock mode. To set the hour, press and hold the CLK control until CLOCK SET appears in the display and press the SEEK control: • •

to decrease hours and to increase hours.

To set the minute, press and hold the CLK control until CLOCK SET appears in the display and press the TUNE control:

TONE

CLK

TONE

CLK

to decrease minutes and to increase minutes.

• • The CLK control will allow you to switch between media display mode (radio station, stereo information, etc.) and clock display mode (time). When in clock mode, the media information will display for ten seconds, when the radio is turned on, and then revert to clock information. Any time that the media is changed, (new radio station, etc.), the media information will again display for ten seconds before reverting back to the clock. In media mode, the media information will always be displayed.

Tune adjust The tune control works in radio mode.

25

Entertainment Systems

Tuneadjustinradiomode • Press

to move to the next

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

SEEK

TUNE

• Press

to move to the next frequency up the band (whether or not

a listenable station is located there). Hold for quick movement.

AM/FM STEREO CASSETTE

VOL - PUSH ON

AM

FM

BASS

TREB

FM1

ST

SEEK

TUNE

SCAN

EJ

BAL

FADE

CLK

TAPE AMS

SIDE REW

1 - 2
FF

Volume/power control Press the control to turn the audio system on or off.

VOL - PUSH ON

26

Entertainment Systems

Turn the control to raise or lower volume.

VOL - PUSH ON

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on.

Bass adjust The bass adjust control allows you to increase or decrease the audio system’s bass output.

Treble adjust The treble adjust control allows you to increase or decrease the audio system’s treble output.

BASS

TREB

27

Entertainment Systems

Speaker balance adjust Speaker sound distribution can be adjusted between the right and left speakers.

Speaker fade adjust Speaker sound can be adjusted between the front and rear speakers.

Seek function The seek function control works in radio mode. Seekfunctioninradiomode • Press

to find the next listenable station down the frequency band.

• Press

to find the next

listenable station up the frequency band.

Scan function The scan function works in radio mode.

BAL

FADE

SCAN

Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the SCAN control again to stop the scan mode.

28

AM/FM select The AM/FM select control works in radio and tape modes.

Entertainment Systems

AM

FM

AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the AM control to select from AM selections, and press the FM control to select from FM1 or FM2 memory preset stations. AM/FMselectintapemode Press this control to stop tape play and begin radio play.

Radio station memory preset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM or the FM select control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.

29

Entertainment Systems

Setting the clock Press CLK to toggle between listening frequencies and clock mode while in radio mode. To set the hour, press and hold the CLK control and press the SEEK control:

• •

to decrease hours and to increase hours.

To set the minute, press and hold the CLK control and press the TUNE control:

• •

to decrease minutes and to increase minutes.

CLK

TAPE AMS

SEEK

TUNE

CLK

TAPE AMS

SEEK

TUNE

The CLK control will allow you to switch between media display mode (radio station, stereo information, etc.) and clock display mode (time). When in clock mode, the media information will display for 10 seconds, when the radio is turned on, and then revert to clock information. Any time that the media is changed, (new radio station, etc.), the media information will again display for 10 seconds before reverting back to the clock. In media mode, the media information will always be displayed.

Tune adjust The tune control works in radio mode.

30

Entertainment Systems

Tuneadjustinradiomode • Press

to move to the next

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

• Press

to move to the next frequency up the band (whether or not

a listenable station is located there). Hold for quick movement.

Tape select • To enter tape mode while in radio

mode, press the TAPE AMS control.

CLK

TAPE AMS

CLK

AutomaticMusicSearch The Automatic Music Search feature allows you to quickly locate the beginning of the tape selection being played or to skip to the next selection. To activate the feature, momentarily depress the TAPE AMS button. Then, press either REW (for the beginning of the current selection) or FF (to advance to the next selection). The tape deck stops and returns to play mode when the AMS circuit senses a blank section on the tape. In order to ensure proper operation of the AMS feature, the tape MUST have a blank section of at least four seconds duration between programs.

TAPE AMS

31

Entertainment Systems

Rewind The rewind control works in tape mode. To rewind in tape mode, press the REW control.

SIDE REW

1 - 2
FF

Fast forward The fast forward control works in tape mode. To fast forward in tape mode, press the FF control. In the tape mode, tape direction will automatically reverse when the end of the tape is reached.

SIDE 1 - 2
REW FF

Tape direction select Press SIDE and 1–2 at the same time to play the alternate side of a tape.

Eject function Press the control to stop and eject a tape.

SIDE REW

1 - 2
FF

EJ

Dolby姞 noise reduction Dolby威 noise reduction operates only in tape mode. Dolby威 noise reduction reduces the amount of hiss and static during tape playback. Press the reduction. Dolby威 noise reduction is manufactured under license from Dolby威 Laboratories Licensing Corporation. “Dolby威” and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation.

control to activate (and deactivate) Dolby威 noise

32

AM/FM STEREO / SINGLE CD RADIO

Entertainment Systems

VOL - PUSH ON

SEEK

TUNE DISCS

AM FM

CD

BASS

TREB

FM1

ST

BAL

FADE

DISC

SCN

CLK

EJ

COMP

CD

CD

SHUFFLE

Volume/power control Press the control to turn the audio system on or off.

VOL - PUSH ON

Turn the control to raise or lower volume.

VOL - PUSH ON

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on.

33

Entertainment Systems

Bass adjust The bass adjust control allows you to increase or decrease the audio system’s bass output.

Treble adjust The treble adjust control allows you to increase or decrease the audio system’s treble output.

Speaker balance adjust Speaker sound distribution can be adjusted between the right and left speakers.

BASS

TREB

BAL

Seek function The seek function control works in radio, CD or CD changer mode (if equipped). Seekfunctioninradiomode • Press

to find the next listenable station down the frequency band.

• Press

to find the next

listenable station up the frequency band.

34

SEEK

TUNE DISCS

Entertainment Systems

SeekfunctioninCDorCDchangermode(ifequipped) • Press • Press

to listen to the next selection on the current disc.

to listen to the previous

TUNE DISCS

SEEK

selection on the current disc.

Scan function The scan function works in radio or CD mode.

SCN

Scanfunctioninradiomode Press the SCN control to hear a brief sampling of all listenable stations on the frequency band. Press the SCN control again to stop the scan mode. ScanfunctioninCDorCDchangermode(ifequipped) Press the SCN control to hear a short sampling of all selections on the current CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again.

AM/FM select The AM/FM select control works in radio and CD modes.

AM FM

CD

AM/FMselectinradiomode The AM/FM control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations.

35

Entertainment Systems

AM/FMselectinCDorCDchangermode(ifequipped) The AM/FM control to stop CD play and begin radio play.

Radio station memory preset The radio is equipped with four or six station memory preset controls. These controls can be used to select up to four or six preset AM stations and eight or twelve FM stations (four to six in FM1 and four to six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.

Setting the clock Press CLK to toggle between listening frequencies and clock mode while in radio mode. To set the hour, press and hold the CLK control.

Press the SEEK control: • •

to decrease hours and to increase hours.

36

SCN

CLK

SEEK

TUNE DISCS

Entertainment Systems

To set the minute, press and hold the CLK control.

Press the TUNE control: • •

to decrease minutes and to increase minutes.

Tune adjust The tune control works in radio mode. Tuneadjustinradiomode • Press

to move to the next

SCN

CLK

SEEK

TUNE DISCS

SEEK

TUNE DISCS

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

• Press

to move to the next frequency up the band (whether or not

a listenable station is located there). Hold for quick movement.

to move to the previous

TuneadjustinCDchangermode(ifequipped) • Press • Press

disc. Hold for quick movement. to move to the next disc. Hold for quick movement.

SEEK

TUNE DISCS

37

Entertainment Systems

CD select To begin CD play (if CD[s] are loaded), press the CD control. The first track of the disc will begin playing. After that, CD play will begin where it stopped last. Press the control again to begin CD changer play (if equipped).

AM FM CD

Do not insert any promotional (odd shaped or sized) discs, or discs with removable labels into the CD player as jamming may occur.

Rewind The rewind control works in CD mode. To rewind in CD mode, press the CD control (preset 1). Press the control again to deactivate rewind mode.

Fast forward The fast forward control works in CD mode. To fast forward in CD changer mode, press the CD control (preset 2). Press the control again to deactivate fast forward mode.

Eject function Press the control to stop and eject a CD.

CD

CD

EJ

Compression feature Compression adjust brings soft and loud CD passages together for a more consistent listening level. Press the COMP control to activate and deactivate compression adjust.

COMP

38

Entertainment Systems

Shuffle feature The shuffle feature operates in CD changer mode (if equipped) and plays all tracks on the current disc in random order. Press the SHUFFLE control to start this feature. Random order play will continue until the SHUFFLE control is pressed again.

SHUFFLE

PREMIUM AM/FM STEREO/CASSETTE (CD CHANGER COMPATIBLE)

VOL PUSH ON

BASS

TREB

SEL

BAL

FADE

CD

TAPE

EJ

RDS

MUTE

SEEK

TUNE

SCAN

AUTO

AM

FM

REW

FF

SIDE 1.2

COMP

SHUFF

Your audio system is equipped with selective lighting, a unique lighting strategy. This lighting feature is operable when the headlamps are illuminated. During the operation of any selected mode, lighting for the individual function controls will either illuminate or turn off. Those controls which have a function for the specific mode of operation selected will be lit, while the controls which have no function for that mode will be turned off.

39

Entertainment Systems

Volume/power control Press the control to turn the audio system on or off.

Turn the control to raise or lower volume.

VOL PUSH ON

VOL