vibrating when driving on rebalanced. Wheel Replacement Replace any wheel that is bent, cracked or badly rusted. coming loose, the wheel, wheel bolts, and wheel nuts should be replaced. the wheel leaks air out, replace it (except some aluminum wheels, which can be repaired). See your GM truck dealer dealer will know what kind Each new wheel should have the same load carrying capacity, diameter, width, offset, and be mounted the same If you need to replace any replace them only with be sure you have the right wheel, wheel bolts, and wheel nuts vehicle.
or your vehicle pulling one way or to be reset. If you notice your vehicle to be
new GM original equipment parts. This
of your wheels, wheel bolts, or wheel nuts,
tire life and best overall performance.
a smooth road, your wheels may need
to have your wheels aligned again.
of wheel you need.
way as the one
it replaces.
way, you will for your
If wheel nuts keep
if any of these conditions exist. Your
If
6-55
I
I CAUTION
A Using the wrong replacement wheels, wheel bolts
or wheel nuts on
It could affect the braking and your vehicle can be dangerous. handling of your vehicle, make your tires lose air and make you lose control. You could have an collision in which you or others could be injured. Always use the correct wheel, wheel for
bolts, and wheel nuts replacement.
The wrong wheel can also cause problems with bearing life, brake cooling, speedometerlodometer calibration, headlight aim, bumper height, vehicle tire or tire chain clearance to the body and chassis. ground clearance, and
A Putting a used wheel on your vehicle is dangerous. You can't know how it's been used or how many miles it's been driven. It could fail suddenly and cause an accident. If you have to replace a wheel, use a new GM original equipment wheel,
Tire Chains
rNOTICE 'If p u t vehicle has LT265/75R16 size tires, don't use tire chams; they damage your vehicle.
c a n !
6-56
I
can be hazardous. Some are' toxic. Others can you strike a match or get them on a hot part are dangerous if you breathe their fumes
Cleaning products if urst into flame the vehicle. Some closed space. When you use anything vehicle, be sure doors or windows when you're cleaning the inside. Never use these to clean your vehicle:
to follow the instructions. And always open your
in a in a container to clean your
of
0 Gasoline 0 Benzene 0 Naphtha 0 Carbon Tetrachloride
Acetone Paint Thinner 0 Turpentine 0 Lacquer Thinner * Nail Polish Remover
They can all be hazardous-some more than all damage your vehicle,
too.
others-and they can
NOTICE
6-57
Service & Appearance Care
Cleaning the Inside of Your Vehjcle Use a vacuum cleaner often to get rid of dust and loose dirt. Wipe vinyl with a clean, damp cloth. Your GM dealer has powdered cleaner. They will clean normal spots and stains very well. Here are some cleaning tips:
two GM cleaners-a solvent-type spot lifter and
Always read the instructions on the cleaner label. Clean up stains as soon as you can-before they set. Use a clean cloth brush may be used Use solvent-type cleaners in a well ventilated area only. don’t saturate the stained area. If a ring forms after spot cleaning, clean the entire area immediately will set.
or sponge, and change if stains are stubborn.
to a clean area often.
a foam-type
A soft
If you use them,
Using Foam-Type CIeaner on Fabric
or section. Mask surrounding trim along
to remove any loose dirt.
Vacuum and brush the area Always clean a whole trim panel stitch or welt lines. Mix Multi-Purpose Powdered Cleaner following the directions on the container label. Use suds only and apply with a clean sponge. Don’t saturate the material. Don’t rub As soon as you’ve cleaned the section, use a sponge suds. Rinse the section with a clean, wet sponge. Wipe off what’s left with a slightly damp paper towel Then dry it immediately with an air hose, a hair dryer
it roughly.
to remove the
or cloth. or a heat lamp.
NOTICE Be careful with a hair dryer or heat lamp. You
could scorch the fabric
Wipe with a clean cloth.
6-58
or it
Using Solvent-Type CIeaner on Fabric First, see if you have to use solvent-type cleaner at all. stains will clean off better with just water and mild soap. If you need to use it, then:
Some spots and
soil from the trim material with a clean, dull knife little cleaner, light pressure and clean cloths
Gently scrape excess or scraper. Use very (preferably cheesecloth). Cleaning should start at the outside of the stain, “feathering” toward the center. Keep changing to a clean section of the cloth . When you clean a stain from fabric, immediately dry the area with an air hose, hair dryer, or heat lamp to help prevent a cleaning ring. (See previous NOTICE.) Fabric Profection Your vehicle has upholstery that has been treated with ScotchgardTM Fabric Protector, a 3M product. ScotchgardTM protects fabrics by repelling oil and water, which are the carriers of most stains. Even with this protection, you still need to clean your upholstery often Further information on cleaning is available by calling Minnesota, 1-800-642-61 67). Special Cleaning Problems Greasy or Oily Stains: Like grease, oil, butter, margarine, shoe polish, coffee with cream, chewing gum, cosmetic creams, vegetable oils, wax crayon, and asp ha1 t .
to keep it looking new.
1-800-433-3296 (in
tar
Carefully scrape off excess stain. Then follow the solvent-type instructions above. Shoe polish, wax crayon, tar and asphalt will stain seat fabric. They should be removed as soon as possible. Be careful, because the cleaner will dissolve them and may cause them
if left on a vehicle
to bleed.
Non-Greasy Stains: Like catsup, coffee (black), egg, fruit, fruit juice, milk, soft drinks, wine, vomit, urine and blood.
Carefully scrape off excess stain, then sponge the place with If a stain remains, follow the foam-type instructions above. If an odor lingers after cleaning vomit watedbaking soda solution: (250 ml) of lukewarm water. Finally, if needed, clean lightly with solvent-type cleaner.
or urine, treat the area with a
1 teaspoon (5 ml) of baking soda to 1 cup
cool water.
6-59
Service & Appearance Care
Combination Stains: Like candy, ice cream, mayonnaise, chili sauce and unknown stains,
Carefully scrape off excess stain, then clean with cool water and allow to dry. If a stain remains, clean
it with solvent-type cleaner.
Cleaning Vinyl or Leather Just use warm water and a clean cloth.
Rub with a clean, damp cloth to remove dirt. more than once. Things like tar, asphalt and shoe polish off quickly. Use a clean cloth and solvent-type vinylheather cleaner.
You may have to do
will stain if you don’t get them
it
Cleaning the Top of the Instrument Panel Use only mild soap and water to clean the top surfaces of the instrument panel. Sprays containing silicones or waxes may cause annoying reflections in the windshield and even make certain conditions. Care of Safety Belts Keep belts clean and dry.
it difficult to see through the windshield under
it may severely weaken
safety belts. If you do,
Do not bleach or dye them. In a crash they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
Glass Glass should be cleaned often. GM Glass Cleaner a liquid household glass cleaner will remove normal tobacco smoke and dust films. Don’t use abrasive cleaners on glass, because they may cause scratches. Avoid placing decals on the inside rear window, since they may have to be scraped off later. If abrasive cleaners are used on the inside of the rear window, an electric defogger element may iicense should not be attached across the defogger grid.
be damaged. Any temporary
(GM Part No. 1050427) or
6-60
if the wiper
GM Windshield Cleaner, Bon-Ami Powder@
of color, gloss
in full strength
if beads do not form when
Cleaning the Outside of the Windshield and Wiper Blades If the windshield is not clear after using the windshield washer, or blade chatters when running, wax or other material may be on the blade or windshield, Clean the outside windshield with (GM Part No. 1050011). The windshield is clean you rinse it with water. Clean the blade by wiping vigorously with a cloth soaked washer solvent. Then rinse the blade with water. Wiper blades should be checked on a regular basis and replaced when worn. Cleaning the Outside of Your Vehicle The paint finish on your vehicle provides beauty, depth retention and durability. Washing Your Vehicle The best way to preserve your vehicle’s finish is to keep it often with lukewarm or cold water. Don’t wash your vehicle in the direct rays or chemical detergents. Use liquid hand, soaps. Don’t use cleaning agents that contain acid agents should be flushed promptly and not allowed to dry on the surface, or they could stain. Dry the finish with a soft, clean chamois towel to avoid surface scratches and water spotting. High pressure vehicle washes may cause water Finish Care Occasional waxing or mild polishing remove residue from the paint finish. products from your dealer. (See “Appearance Care and Materials” Index.) Your vehicle has a “basecoatlclearcoat” paint finish. depth and gloss to the colored basecoat.
be necessary to of your vehicle may You can get GM approved cleaning in the
to enter your vehicle.
of the sun, Don’t use strong soaps dish or car washing (non-detergent) or abrasives. All cleaning
The clearcoat gives more
or a 100% cotton
it clean by washing
Machine compounding or aggressive polishing on a basecoatlctearcoat paint finish may dull the finish or leave swirl marks.
6-6 1
I f
GM Chrome
To avoid damaging protective trim, never
to clean aluminum. A
if necessary.
to a high polish, is recommended for all bright metal
Protecting Exterior Bright Metal Parts Bright metal parts should be cleaned regularly to keep their luster. Washing with water is all that is usually needed. However, you may use Polish on chrome or stainless steel trim, Use special care with aluminum trim. use auto or chrome polish, steam or caustic soap coating of wax, rubbed parts. Aluminum Wheels (If So Equipped) Your aluminum wheels have of your vehicle. Don’t use strong soaps, chemicals, chrome polish, or other abrasive cleaners on them because you could damage this coating. After rinsing thoroughly, a wax may be apptied. NOTICE f you have aluminum wheels, don’t use ?as hard silicon carbide cleaning brushes. These brushes can take xotective coating.
a protective coating similar to the painted surface
off the
an automatic vehicle wash that
GM White Sidewall Tire Cleaner. You can
it.
last longer, seal better, and not stick or squeak. Apply silicone
White Sidewall Tires Your General Motors dealer has a use a stiff brush with Weatherstrips These are places where glass or metal meets rubber. Silicone grease there will make them grease with a clean cloth at least eve@ six months. Sheet Metal Damage is damaged and requires sheet metal repair If your vehicle make sure the body repair shop applies anti-corrosion material repaired or replaced Foreign Material Calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, and 0the.r foreign matter can damage your vehicle’s finish Use cleaners that are marked safe for painted surfaces for these stains. Finish Damage Any stone chips, fractures or deep scratches right away. Bare metal repair expense.
will corrode quickty and may develop into a major
to restore corrosion protection.
if they remain on painted surfaces.
in the finish should be repaired
or replacement, to the parts
6-62
ice and snow removal and dust control can collect on the
Minor chips and scratches can be repaired with touch-up materials available from your dealer or other service outlets. Larger areas of finish damage can be corrected in your dealer’s body and paint shop. Underbody Maintenance Chemicals used for underbody. If these are not removed, accelerated corrosion (rust) can occur on the underbody parts such as fuel lines, frame, floor pan, and exhaust system even though they have corrosion protection. At least every spring, flush these materials from the underbody with water. Clean any areas where mud and other debris can collect. Dirt packed in closed areas of the frame should be loosened before being flushed. dealer or an underbody washing system can do this for you. Chemical Paint Spotting Some weather and atmospheric conditions can create Airborne pollutants fall upon and attack painted surfaces on your vehicle. This damage can take two forms: blotchy, ringlet-shaped discolorations, and small irregular dark spots etched into the paint surface. Although no defect no charge to the owner, the surfaces of new vehicles damaged by this fallout condition within 12 months or 12,000 miles (20 000 km) of purchase, whichever comes first.
in the paint job causes this, General Motors will repair, at
a chemical fallout.
plain
Your
6-63
old waxes, polishes, tar
Service & Appearance Care
Appearance Care Materials
PART NUMBER 1050172
1050173
I0501 74
1050214 32
1050244
I050427
USAGE
DESCRIPTION
SIZE 16 02. Tar and Road Removes (0.473L) Oil Remover and road oil 16 oz. (0.473L) and 16 02. White Sidewall Cleans white and black tires (0.473L) Tire Cleaner
Polish chrome and stainless steel
Chrome Cleaner Removes rust and corrosion on
and stain removal on leather
VinvVLeather Spot
oz. (0.946L) Cleaner 16 02. Fabric Cleaner Spot and stain removal on cloth (0.473L) 23 02. Glass Cleaner Glass cleanina and sDot (0.680L)
on vinyls
and fabric
or vinyl
1050429 6 Ibs. Multi-PurDose Cleans vinvl and cloth on door trim,
(2.72 kg) Powder
1050729
1051 055
IO51 398
1052870
1050201
Vinyl Top
Cleaner
8 02. (0.237L) 16 02. Preservatone (0.473L) 8 02. (0.237L) 16 02. Wash-Wax (0.473L) 16 02. Magic Mirror Exterior cleaner and I (0.473L) I Cleaner-Polish
Spot Lifter
(conc.)
1 polish
cleaner seats, and'carpet-also mats Cleaning of vinyl tops
Vinyl top dressing
Spot and stain removal on cloth and fabric Exterior wash
cleaning
tires and
TO077
6-64
Vehicle ldentification Number (\ I) m
t-
KO641
your vehicle.
It appears on a plate
in the front the instrument panel, on the driver's side. You can see it if you VIN also appears of
This is the legal identifier for corner of look through the windshield from outside your vehicle. The on the Vehicle Certification and Service Parts labels and the certificates title and registration. Engine Identification The eighth character This code will help parts in this section.
GM engine. you identify your engine, specifications, and replacement
is the engine code for your
in your VIN
6-65
Service & Appearance Cam
v) 0 a
Q,
pe: w 3 z
Qo
I-
O t J
It
C 9
6-66
POI 72
Service Parts Iden M f l cation Label
WHEELBASE
VEH!CLE IDENTfFlCATlOb NUMBER
6BJ 621. 62U 670 671 679 763 BHJ 9HJ
PAINT TECHNOLOGY
ORDER NUMBER
EXTERIORCOLORS
MODELMSIGNATION
OPTIONCONTENT
K2680
if you
You’ll find this label on the inside ever need to order parts. On this label
is:
of the glove box. It’s very helpful
Your VIN. Its model designation. Paint information. A list of all production options and special equipment.
Be sure that this label is not removed from the vehicle. Add-on Electrical Equipment
Don’t add anything electrical to your vehicle unless you check with your dealer first. Some electrical equipment can damage your vehicle and the damage wouldn’t be covered ther things from working as they should.
by your warranty. Some of it can just keep
6-67
Service & Appearance Care
Specification Charts Replacement Parts Replacement part numbers listed in this section are based on the latest of printing, and are subject information available at the time part listed in this manual is not the same as the part used in your vehicle when it was built, or dealer. Engine identification
if you have any questions, please contact your
to change. If a
VIN
Fuel
Produced
BY U.S., Can. us.
TB I TB I
GVWR and below or: GVWR and above.
GM truck
Emissions
TO291
Liter
Displacement Type Engine System Code V8 V8
5.7 7.4
*Light Duty Emissions with 8500 Heavy Duty Emissions with 8501
Wheel Nut Torque
DESCRIPTION
MODEL
C 1500 K 1500, C-K 2500 C-K 2500 Cooling System Capacity
5 bolts
120 (14mm) 6 bolts (1 4mm) 8 bolts (14mm)
ft. Ibs. (1 60 Nmm) 120 ft. Ibs. (160 N-m) 120 ft. Ibs. (160 Nem)
TO2951
Without
ENGINE
CODE
5.7L 7.4-
VIN
NC
17.5 Quarts (16.5 Liters) 23 Quarts (22 Liters)
QUANTITY* AIC 18 Quarts (1 7 Liters) 25 Quarts (23.5 Liters)
With
*All quantities are approximate. *After refill, the level MUST be checked as outlined under “Engine Cooling System” in Section
5.
TO292
6-68
Crankcase Capacify
QUANTITY*
Filter
With
CODE Without ENGINE VIN Filter 5.7L 7.4L *All quantities are approximate. *After refill, the level MUST be checked as outlined under “Engine Oil And Filter Recommendations” in Section
4 Quarts (3.8 Liters) 6 Quarts (5.7 Liters)
5.
Air Condifioning Refrigeranf Capacify
5 Quarts (4.8 Liters) 7 Quarts (6.6 Liters)
TYPE* Refrigerant R-12 Front
AJC 3.0 Ibs.
kg) (1.360
Front and Rear AJC 4.25 Ibs. (1.927 kg)
If the air conditioning
GM ask sure, not your dealer.
*Not all air conditioning refrigerants are the same. system in your vehicle needs refrigerant, be sure the proper refrigerant is used. If you’re Fuel Tank Capacify
Model-Standard
Utility 30
Gallons
Wagon (159
Gallons 42
All quantities are for a completely dry tank and are approximate.
Model-Standard
Service Replacemenf Part and Filfer Recommendations
TO296
QUANTITY
TO302
TO2971
- 1 Air
Oil Filter PF5 1 PF35t PF35t PF35 PF35 PF35 PF35
5.7 (K) 6.2 (C) 6.2 (J)* 6.5 (F)*
PCV Valve Cleaner AI 7acw cv7agc A348C A348C A644C A644C A91 7C A348C
cv774c cv774c
cv774c
Spark** Plugs .CR43TS .CR43TS .CR43TS
.CR43TS
use a PF51 oil filter
Radiator
Fuel Filter GF481 GF481 GF481 TP 1 006 TP 1 006 TP 1 006 G F48 1
Cap RC36 RC36 RC36 RC32 RC32 RC32 RC36
*Heavy Duty Emission Engine **Use AC copper-cored resistor type spark plugs.
6-69
Fuses and Circuit Breakers
Circuit Breaker
Fuse 20 Amp
Name Gages
Circuits Protected
E.G.R., E.C.M.
Park LP P. Lps
15 Amp 10 Amp
Turn-BIU EMCIIgn
Inj. A Brake AC/Htr ctsy
10 Amp 15 Amp 25 Amp 20 Amp
Cruise Control, 4 WD Display Illum. Rear Window Defogger Timer, Aux. Batt. Relay Feed, Safety Belt Buzzer Timer, Cluster Ign. Feed Back-up Lamps, Turn Signals T.C.C., Air Diverter, E.S.C., Ign., R.W.A.L. Brake Switch Throttle Body Injectors A.B.S., Cluster-Speed0 H.V.A.C. 4 WD, Aux. Batt. Relay Dome Lamp, Ctsy. and Glove Box Lps. (TR-9), Radio (Memory-Clock) Horn Relay, Horn Feed, Park Lamps C49 SW Illum., Headlamp Radio Illum., H.V.A.C. Illum. Haz. Flasher, Seat Belt Buzzer, Stop Lmps., A.B.S. Memory Wiper Windshield Wiper, Washer Radio Radio Feed Acc/lgn. Pwr. Windows AcdBatt. Door Locks, Rear Window Defogger Crank Crank, Discreet 4WD Four Wheel Drive DRL Daytime Running Lights RR Wpr Rear Window Wiperwasher TIG Re1 Cigar Lighter, Rear Hatch Release An inline fuse is used for the underhood lamp Jo not use fuses of higher amperage than those recommended above.
5 Amp 25 Amp 15 Amp 25 Amp 25 Amp
20 Amp 5 Amp
25 Amp 10 Amp
“On” Warning,
StopiHaz.
15 Amp
30 Amp 30 Amp
TO291
6-70
FUSE LEGEND
pJ I ~
GAGES
HTR AIC
WIPER 19
TURNlBU
r.
4WD
PCM/IGN
BRAKE
rm
PARK LP
I rn
I INJA p # € m
PANEL LPS
TRANS
DRL
STOPIHAZ
6-7 1
Service & Appearance Care
Light Bulb Data
Lamp or Bulb Exterior Liqhts: Headlamps: 2 Headlamp System
Headlamps: 4 Headlamp System
Haloaen (Opt.)
(Composite)
Trade No.
6052 H6054 9005 9006
Power Rating
Candle
55/65 35/65 65
2 1
32-2
Lamps
Interior Lights: Dome Lamps 21 I Readina
Roof Console Lamps , Courtesy Lamp , Heater or N C Control Lamp Four Wheel Drive Indicator Four Wheel Drive Shift Lever Instrument Panel Compartment Lamp 1 Ashtray
Lamp
10
12
1-2 I 211-2 168 1003 194 161 1 94 1 94 I 194
Malfunction Indicator (“Service Engine - Soon”) Upshift Indicator *Suburban only tCanadian Vehicles
74 74
only
TO293
6-72
Scheduled Mainfenance Services Section
to retain it’s safety, dependability, and
This section covers the maintenance required for your General Motors vehicle. Your vehicle needs these services emission control performance. A Word About Maintenance ................................................................................. 7-3 Your Vehicle and the Environment ...................................................................... 7-3 Recording Maintenance Services ......................................................................... 7-3 Scheduled Maintenance Services ........................................................................ 7-4 Selecting The Proper Maintenance Services ............................................... 7-4 Gasoline Engines with Light Duty Emissions-
Maintenance Schedule I ............................................................................ 7-6
Gasoline Engines with Light Duty Emissions- Maintenance Schedule II ........................................................................... 7-8
Gasoline Engines with Heavy Duty Emissions-
Maintenance Schedule I .......................................................................... 7-1 C
Gasoline Engines with Heavy Duty Emissions-
Maintenance Schedule II ......................................................................... 7-1 2
6.2L and 6.5L Diesel Engines- Maintenance Schedule I .......................................................................... 7-1 4 6.2L and 6.5L Diesel Engines-
Maintenance Schedule II ......................................................................... 7-1 6
7-1
Scheduled Mainfenance Services
Explanation of Scheduled Maintenance Services ...................................... 7-18 Owner Checks and Services .............................................................................. 7-22 Recommended Fluids & Lubricants ................................................................... 7-25 Maintenance Record ........................................................................................... 7-27 Service Station Checks ....................................................................................... 7-28
7-2
in good working You may drive very
long distances all
in many other ways.
need more frequent checks and replacements than
Your dealer can be relied upon to use
GM dealer, the place many GM owners choose
If you have any questions on how to keep your vehicle
in very hot, dusty weather. You may use your vehicle in making
A Word About Maintenance We at General Motors want to help you keep your vehicle condition. But we don’t know exactly how you’ll drive it. short distances only a few times a week. Or you may drive the time deliveries. Or you may drive it to work, to do errands, or Because of all the different ways people use their GM vehicles, maintenance needs vary. You may even you will find in the schedules in this section. So please read this section and note how you drive. in good condition, see your to have their maintenance work done. proper parts and practices. Your Vehicle and the Environment Proper vehicle maintenance not only helps keep your vehicle in good working condition, but also helps the environment. procedures are important. Improper vehicle maintenance or the removal of important components can significantly affect the quality Improper fluid levels or even the wrong emissions from your vehicle. keep your vehicle Recording Maintenance Services The Maintenance Record near the end of this section provides you to record the maintenance performed on your vehicle. Whenever any maintenance is performed, be sure to write Record. This will help you determine when your next maintenance should be done, In addition, it is a good idea to keep your maintenance receipts. They may be needed
in good condition, please maintain your vehicle properly.
To help protect our environment, and
it down in the Maintenance
to qualify your vehicle for warranty repairs. rn
I CAUTION I A Performing maintenance work on a vehicle can be dangerous. In L trying to do some jobs, you can be seriously injured. Do your own maintenance work only if you have the required know-how and the proper tools and equipment for the job. If you have any doubt, have a qualified technician do the work.
tire inflation can increase the level
All recommended maintenance
a place for
to help
of the air we breathe. of
to do some work on your vehicle, you will probably
If you are skilled enough how to want to get the service information obtain various service publications for your vehicle, see “Service Publications” in the Index. You will find a list of publications and an order form in the back of the book.
GM publishes. For information on
Scheduled Maintenance Services
Scheduled Maintenance Services This part tells you the maintenance services that you should have done and the times you should schedule them. and wants you to be happy with it. needs, you’ll know that GM-trained and supported service people will perform the work using genuine GM parts. These schedules are for vehicles that:
Your GM dealer knows your vehicle best If you go to your dealer for your service
carry passengers and cargo within the recommended limits. these limits on your vehicle’s Certification Label. See “Loading Vehicle” in the Index. are driven on regular road surfaces, and within legal driving limits. are driven off-road “Off Road Driving With Your Four Wheel Drive Vehicle.” use the recommended fuel. See “Fuel” in the Index.
in the recommended manner. See the index Under
You will find
Your
Selecting The Proper Maintenance Services To find the proper maintenance schedule for your vehicle, you must know two things. What engine your vehicle has, and how you use your vehicle. engine type will tell you which chart tell you which schedule to use. The charts are found later Selecting the Proper Maintenance Chart Your engine Duty or Heavy Duty Emissions) will tell you which maintenance chart Find your Vehicle Identification Number (VIN), and to see what your engine code Classifications table to find your emissions classification.
type (Gasoline or Diesel) and its emissions classification (Light
is. Then use the following Engine Emissions
to use, and your driving conditions will
in this section.
to use. look at the eighth character
Your
on the Service Parts Identification Label. See
of your instrument panel,
the plate on the top left corner
Your VIN is on the Certification Label and “Vehicle Identification Number” If your engine has more than one emissions classification, Certification Label to see what your Gross Vehicle Weight (GVWR) is. See “Loading Your Vehicle” in the Index.
in the Index.
look at your Rating
7-4
r
VIN Code
EMISSIONS ENGINE CLASSIFICATION
Enaine Description
4.3L V6TTBI with 8500 GVWR and below with 8501 GVWR and above 5.0L V8TTBI 5.7L V8TTBI with 8500 G W R and below with 8501 GVWR and above 6.2L V8IDiesel 6.2L V8IDiesel 6.5L V8IDiesel 7.4L V8/TBI .Except 454 SS Model with 454 SS Model
Emissions
LD HD LD
LD HD LD HD HD
HD LD
TO268
NOTE: TBI is a throttle body injection system. Selecting the Proper Maintenance Schedule Here is how to tell which schedule to follow once you find the proper maintenance chart to use. MAINTENANCE SCHEDULE Is any one of these Most trips are Most trips are temperatures are below freezing. The engine stop-and-go traffic, or commercial use). You operate in dusty areas or off-road frequently. You tow a trailer
true for your vehicle? less than 4 miles less than 10 miles (16 kilometers), and the outside
is at low speed most of the time (as
(6 kilometers).
of these is true for your driving,
If any one (or more) Schedule 1 is shown by a plus sign (t) on the chart. MAINTENANCE SCHEDULE Follow Schedule II ONLY if none of the above conditions are true. Schedule II is shown by a dot (.) on the chart.
follow Schedule I.
II
7-5
in door-to-door delivery,
Scheduled Maintenance Services
GASOLINE ENGINES WITH LIGHT DUTY EMISSIONS-
FOOTNOTES: *An Emission Control Service **See “Explanation of Scheduled Maintenance Services” in this section. tTo determine the emissions classification
of your engine refer
Proper Maintenance Chart”
in this section.
to “Selecting the
TO337
7-6
MAINTENANCE SCHEDULE It
TO334
7-7
Scheduled Maintenance Services
GASOLINE ENGINES WITH LIGHT DUTY EMISSIONS-
If your driving conditions meet those specified in “Scheduled Maintenancc I (t). 15 12
Services” in this section, use Maintenance Schedule
Miles (000) 3
(000) 5 10 12.5 15
6 7.5 25
20
18 30
Kilometers
Item No. Service Engine Change*-Every Oil Months, Filter 12 Change*-Every Oil or 2 Chassis Lubrication-Every 12 or Months, 3 Clutch Fork Ball Stud Lubrication 5 Cooling System Service*-Every
Months or
6 Air Cleaner Filter Replacement* 7 Front Wheel Bearing Repack 8 Transmission Service**
12 Months,
or
24
25 Drive Axle Service** 26 Brake Systems Inspection** FOOTNOTES: *An Emission Control Service **See “Explanation of Scheduled Maintenance Services” tTo determine the emissions classification of your engine refer
Proper Maintenance Chart”
in this section.
in this section.
to “Selecting the
TO332
MAINTENANCE SCHEDULE Ilt
THE SERVICES SHOWN ON THIS CHART ARE TO BE DONE AFTER 60,000 MILES AT THE SAME INTERVALS.
UP TO 60,000 MILES (100 000 km)
TO333
7-9
Scheduled Maintenance Services
GASOLINE ENGINES WITH HEAVY DUTY EMISSIONS-
I If your driving conditions meet those specified
in “Scheduled Maintenance
m -
‘OOTNOTES:
An Emission Control Service
“See “Exglal?ation of Scheduled Maintenance Services” L Also a Noise Emission Control Service I Applicable only to vehicles sold in the United States - To determine the emissions classification
Chart” Proper Maintenance
section.
in this
of your engine refer
in this section.
to “Selecting the
TO339
7-1 0
MAINTENANCE SCHEDULE It
THE SERVICES SHOWN ON THIS CHART UP TO 60,000 MILES (100 000 km) ARE TO BE DONE AFTER 60,000 MILES AT THE SAME INTERVALS.
TO340
7-1 1
Scheduled Maintenance Services
GASOLINE ENGINES WITH HEAVY DUTY EMISSIONS-
Services” in this section, use Maintenance Schedule
If your driving conditions meet those specified in “Scheduled Maintenancc I (t). 15 10
Miles (000) (000)
Service
Item Kilometers No.
12 20
1 -
Oil Filter Change*-Every 12 Months,
or
10 11 12 13 14
’
15 16 17 18 19 I 20 ! 21 1 22
24 * Drive Axle Service** 25 3rake Systems 26 I
Inspection**
FOOTNOTES: * An Emission Control Service **See “Explanation of Scheduled Maintenance Services” in this section. A Also a Noise Emission Control Service I Applicable only t To determine the emissions classification of your engine refer
to vehicles sold in the United States
Chart”
Maintenance
to “Selecting the Proper
T033f
7-1 2
MAINTENANCE SCHEDULE If your driving conditions Maintenance Services”
Ilt
do NOT meet those specified
in this section, use Maintenance Schedule
in “Scheduled II (9.
THE SERVICES SHOWN ON THIS CHART ARE TO BE DONE AFTER 60,000 MILES AT THE SAME
UP TO 60,000 MILES (100 000 km)
INTERVALS.
TO335
7-1 3
Scheduled Maintenance Services
6.2L AND 6.5L DIESEL ENGINES-
FOOTNOTES:
* Change filter every
15,000 miles (24 000 km), except when operating in dusty
conditions. Dusty conditions may require more frequent filter replacement. Extreme dust and dirt operating conditions (off-road), may require the air filter checked as often as every * An Emission Control Service ** See “Explanation of Scheduled Maintenance Services” in this section. to trucks sold A Also, a Noise Control Service (applicable t This maintenance schedule applies
300 miles (483 km) and replaced as necessary.
to vehicles with engine VIN Code J).
to all diesel engines available.
in the United States.
Applicable only
TO330
to be
7-1 4
MAINTENANCE SCHEDULE It
THE SERVICES SHOWN ON THIS CHART UP TO 60,000 MILES (100 000 km) ARE TO BE DONE AFTER 60,000 MILES AT THE SAME INTERVALS.
TO341 I
7-1 5
Scheduled Maintenance Services
6.2L AND 6.5L DIESEL ENGINES-
-0OTNOTES:
* An Emission Control Service ** See “Explanation of Scheduled Maintenance Services” in this section. W Applicable only A Also, a Noise Control Service (applicable t This maintenance schedule applies
to trucks sold in the United States.
to sll diesel engines available.
to vehicles with engine VIN Code J).
TO33 1
7-1 6
MAINTENANCE SCHEDULE Ilt
If your driving conditions do Maintenance Services” in this section, use Maintenance Schedule
NOT meet those specified
in “Scheduled II (0).
THE SERVICES SHOWN ON THIS CHART UP TO 60,000 MILES (100 000 km) ARE TO BE DONE AFTER 60,000 MILES AT THE SAME INTERVALS.
TO336
7-1 7
Scheduled Maintenance Services
Explanation Of Scheduled Maintenance Services Below are explanations of the services listed in the maintenance charts. The proper fluids and lubricants to use are listed whoever services your vehicle uses these. all necessary repairs done before you or anyone else drives the vehicle.
in this section. Make sure All parts should be replaced and
1. ENGINE OIL AND OIL FILTER CHANGE* -ALWAYS USE SG OR
SG/CE QUALITY, ENERGY CONSERVING VISCOSITY. To determine the preferred viscosity engine (e.g. SAE 5W-30 or 2. CHASSIS LUBRICATION
10W-30), see “Engine Oil”
-Lubricate the front suspension, king
oil for your vehicle’s in the Index. pin
II OILS OF THE PROPER
(2 wheel drive), brake
bushings, steering linkage, transmission, and transfer case shift linkage, parking brake cable guides, propshaft splines pedal springs, and clutch pedal springs at the intervals specified. If you have a 3500 HD, lubricate the king pins and king pin bushings every 1,500 miles (2500 km) for Maintenance Schedule 1, or every 3,000 (5000 km) for Maintenance Schedule Ball joints and king pin bushings should not be lubricated unless their temperature is 10°F (-12”C), or higher. When the weather is cold, let or they could be damaged. them warm up before lubrication Also, be sure to check all the vehicle fluid levels at this time.
2.
3. CLUTCH FORK BALL STUD LUBRICATION
-Lubricate the clutch fork
ball stud through the fitting on the clutch housing. Lubricant must be added “sparingly” to the fitting, as only. lubricate the ball stud surface. Do not add lubricant more often than the intervals in the Maintenance Charts. the clutch assembly.
Too much lubricant will damage
0066 Ib. (.003 kg)
is required to
4. ENGINE IDLE SPEED ADJUSTMENT (DIESEL ENGINES)*
-Adjust to
the specifications shown on the underhood label. calibrated test equipment.
You must use
5. COOLING SYSTEM SERVICE*
-Drain, flush and refill system with new
coolant. See “Engine Coolant” in the Index for the proper coolant and mixture to use in your vehicle. Also inspect the hoses and replace them deteriorated. Tighten all hose clamps (except consrant tension Remove debris and clean the outside of the radiator and air conditioning condenser. Wash the radiator neck. test the radiator and cap. * An Emission Control Service
if they i
To ensure proper operation, pressure
cracked, swollen, or
clamps).
7-1 8
6. AIR CLEANER FILTER REPLACEMENT*
-Replace at every miles (50 000 km) or more often under dusty conditions. Ask for the proper replacement intervals for your driving conditions.
30,000 your dealer
7. FRONT WHEEL BEARING REPACK
(2 WHEEL DRIVE ONLY)
-Clean
and repack the front wheel bearings at each brake relining, specified interval, whichever comes first.
or at the
8. TRANSMISSION SERVICE
Automatic Transmission -Change the transmission fluid and filter every 15,000 miles (25 000 km) for vehicles under 8,600 GVWR or every 12,000 miles (20 000 km) for vehicles over 8,600 GVWR or more of these conditions: is mainly driven under one
if the vehicle
In heavy city traffic. Where the outside temperature regularly reaches higher. In hilly or mountainous terrain. Frequent trailer pulling. Uses such as taxi, police, delivery
90°F (32°C) or
or other commercial service.
of these conditions, change
If the vehicle is not used mainly under any the fluid and filter every 30,000 miles (50 000 km) for vehicles under 8600 GVWR or every 24,000 miles (40 000 km) for vehicles over 8600 GVWR. See “Automatic Transmission Fluid” information. Manual Transmission -Transmission fluid does not require periodic changing.
in the Index for more
9. CDRV SYSTEM INSPECTION* -Check the Crankcase Depression
Regulator Valve System the system checked as described
for any worn, plugged or collapsed hoses. Have
in the Service Manual.
10. FUEL FILTER REPLACEMENT --Replace the
interval or sooner if clogged.
fuel filter at
the specified
11. SPARK PLUGS REPLACEMENT” --Replace spark
listed in Section 6. See “Specification Charts” in the Index.
plugs with the type
12. SPARK PLUG WIRE INSPECTION* -Clean wires and inspect
for burns,
fit at the distributor and at
cracks or other damage. Check the wire boot the spark plugs. Replace wires as needed. *An Emission Control Service
7-1 9
Scheduled Maintenance Services
13. EGR SYSTEM
INSPECTION* -Conduct EGR
described in the Service Manual.
SYSl /l CHECK as
14. ELECTRONIC VACUUM REGULATOR VALVE
(EVRV) INSPECTION*
filter for excessive contamination or plugging.
If required, clean
of biodegradable soap and water, let
dry and
-Inspect element with a solution reinstall element.
15. ENGINE TIMING CHECK AND DISTRIBUTOR CHECK
(SOME
MODELS)* -Adjust timing to underhood label specifications. Inspect the inside and outside of the distributor cap and rotor for cracks, carbon tracking and corrosion. Clean or replace as needed.
16. FUEL TANK, CAP AND LINES INSPECTION*
-Inspect the fuel tank,
cap and lines an even filler neck imprint, and any damage, Replace parts
for damage or leaks. Remove fuel cap, inspect gasket
for as needed.
17. THERMOSTATICALLY CONTROLLED AIR CLEANER INSPECTION* A-(If so equipped.) Inspect all hoses and ducts for proper hookup. Make sure valve works properly.
18. ENGINE ACCESSORY DRIVE BELT(S) INSPECTION*
Look for cracks, fraying, wear, and proper tension. Adjust needed.
--Inspect belts.
or replace as
19. EVAPORATIVE CONTROL SYSTEM (ECS) INSPECTION*
-Check all
fuel and vapor lines and hoses for proper hookup, routing, and condition. Check that the purge valve works properly, if equipped. Replace as needed.
20. SHIELDS AND UNDERHOOD INSULATION INSPECTION
A w l n s p e c t
shields and underhood insulation for damage replace as required.
or looseness. Adjust
or
21. AIR INTAKE SYSTEM
INSPECTlONAWCheck the air intake system
installation to see that gaskets are seated properly and connections, fasteners, and other components are tight. sure that the air cleaner housing is properly seated, that the cover tightly, and the wing nuts are tight. Tighten connections and fasteners or replace damaged parts as required.
all hose Also check to be fits
22. THERMOSTATICALLY CONTROLLED ENGINE COOLING FAN
INSPECTIONAB-(If so equipped.) With the engine normal operating temperature, check by hand on fluid coupling or viscous drives. Replace *An Emission Control Service A Also a Noise Emission Control Service
off and below to see that the fan can be rotated as necessary.
Applicable only to vehicles sold in the United States
7-20
23. EXHAUST PRESSURE
EGULATOR VALVE
INSPECTION* -Check that
the valve works properly. Correct any binding. Inspect hoses for cracks, chafing or decay. Replace parts
as needed. 24. TIRE AND WHEEL ROTATION AND INSPECTION
15,000 miles (25 000 kilometers)
-For proper wear tire life, rotate tires at the first 6,000 miles (10 000 I (t) or 7,500 miles (12 500 kilometers) for
in Section 6. or damage. If irregular or premature wear Also, check for damaged wheels. See
and maximum kilometers) for Schedule Schedule II (.) and then every thereafter. Follow the instructions and patterns shown Check tires for uneven wear apparent, check wheel alignment. “Tires” in the Index for more information. For dual wheels, whenever the vehicle, wheels, or fasteners are new, have the wheel fastener torque set at the first 100, miles (160, 1600 and 10 000 km). For 3500 H.D. Models, block the tires opposite those being removed keep the vehicle from rolling.
1,000 and 6,000
is
to
25. DRIVE AXLE SERVICE -Check
readfront axle fluid level and add as
needed. Check constant velocity joints and axle seals for leaking.
oil changes. In dusty fluid at every 15,000 miles
Locking differential-Drain fluid at first oil change and refill. Check fluid level and add as needed at subsequent areas, or trailer towing applications drain (24 135 kilometers) and Standard differential -Check fluid level and add as needed at every oil change. In dusty areas, or trailer towing applications, drain fluid every 15,000 miles More frequent lubrication may be use.
required on heavy-duty or off-road
(24 135 kilometers) and refi1l.t
refill$
26. BRAKE SYSTEM INSPECTION
-When
the engine oil is changed,
inspect the lines and hoses for proper hookup, binding, leaks, cracks, chafing, etc. Check the parking brake adjustment, and the the master cylinder. A low fluid which may need to be serviced$ *An Emission Control Service t A fluid loss in these systems may indicate a problem. Have them inspected and repaired at once.
level can indicate worn disc brake pads
fluid level in
7-2 1
Scheduled Maintenance Services
Also inspect drum brake linings for wear and
or dirt from the wheel and
or conditions result in
When the wheels are removed for rotation, inspect disc brake pads for wear and rotors for surface condition. cracks. Inspect other brake parts, including drums, wheel cylinders, parking brake, etc., at the same time. Remove any rust mounting surfaces before mounting the wheel. Inspect brakes more often if driving habits frequent braking. Owner Checks and Services Listed below are owner checks and services which should time period specified to help ensure proper safety, emission performance, and dependability of your vehicle. Be sure any necessary repairs are completed at once. Whenever any fluids or lubricants are added as shown At Least Once a Month Tire inflation pressure check --Check are low, inflate them to the level specified tire inflation charts. See “Loading the Index. At Least Once a Year Key lock cylinder lubrication See the “Recommended Fluid and Lubricants” chart Transmission neutral or clutch start switch operation
--Lubricate key lock cylinders with engine in this section.
to your vehicle, make sure they are the proper ones,
the tires for proper inflation. on the certification label
in this Section.
Your Vehicle” or
If they or on the “Inflation-Tire Pressure” in
be made at the
4 When you are doing
it does, you
or others could be injured. Follow the steps
below.
this check, the vehicle could move suddenly.
1. Before you start, be sure you have enough room around the vehicle. 2. Firmly apply both the manual parking brake and the regular brake. See
in the Index. Do not use the accelerator