Download PDF Manual

touched (if equipped). Map Settings See “Map Settings” in “Configure Menu” in the infotainment manual.


Vehicle Settings Select and the following may display: . Climate and Air Quality . Comfort and Convenience . Collision Detection Systems


Lighting


. Power Door Locks . Remote Lock/Unlock/Start . Return to Factory Settings? Climate and Air Quality Select and the following may display: . Auto Fan Speed . Air Conditioning Mode . Remote Start Auto Heat Seats . Auto Defog . Auto Rear Defog


Auto Fan Speed This selection is available on vehicles with the Automatic Climate Control System. Choose from the following blower speed settings: Select High, Medium, or Low


Air Conditioning Mode This will allow you to select whether or not the air conditioning comes on automatically the next time the vehicle is started. On means that the air conditioning will be on at start up, regardless of whether it was on or off the last time the vehicle was turned off. Off means the air conditioning will be off at the next start up, regardless of whether it was on or off the last time the vehicle was turned off. Last Setting means that when the vehicle is started, the air conditioning will resume whichever setting it was at the last time the vehicle was turned off. Select On, Off, or Last Setting.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (36,1)


5-36


Instruments and Controls


Remote Start Auto Heat Seats When on, this feature will turn the heated seats on when using remote start on cold days. Select On or Off.


Auto Defog When turned on and high humidity is detected, the climate control system may adjust to outside air supply and turn on the air conditioner or the heater. The fan speed may slightly increase to help prevent fogging. When high humidity is no longer detected, the system will return to its prior operation. Select On or Off.


Auto Rear Defog When on, this feature turns on the rear defogger at vehicle start when the interior temperature is cold and fog is likely. The auto rear defog function can be disabled by pressing 1. When off, the feature can be turned on by pressing 1.


See “Rear Window Defogger” under Climate Control Systems on page 8-1 or Automatic Climate Control System on page 8-3. Select On or Off. Comfort and Convenience Select and the following may display: . Easy Exit Driver Seat . Chime Volume . Reverse Tilt Mirror . Memory Remote Recall


Easy Exit Driver Seat This feature moves the seat rearward allowing the driver more room to exit the vehicle. See “Easy Exit Driver Seat” under Memory Seats on page 3-6. Select On or Off.


Chime Volume This allows the selection of the chime volume level. Select Normal or High.


Reverse Tilt Mirror When on, both the driver and passenger mirrors will tilt downward when the vehicle is shifted to R (Reverse) to improve visibility of the ground near the rear wheels. They will return to their previous driving position when the vehicle is shifted out of R (Reverse), the ignition is turned to OFF, or the vehicle is left in R (Reverse). See Reverse Tilt Mirrors on page 2-16. Select On or Off.


Memory Remote Recall This feature automatically recalls the current driver’s previously stored 1 or 2 button positions when entering the vehicle. See "Recalling RKE Memory Positions (Memory Remote Recall)" under Memory Seats on page 3-6. Select On or Off. Collision Detection Systems Select the following may display: . Park Assist


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (37,1)


Instruments and Controls


5-37


Park Assist This allows the Parking Assist feature to be turned on or off. Select On or Off. Lighting Select and the following may display: . Vehicle Locator Lights . Exit Lighting


Vehicle Locator Lights This allows the vehicle locator lights to be turned on or off. Select On or Off.


Exit Lighting This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside. Select Off, 30 Seconds, 1 Minute, or 2 Minutes.


Power Door Locks Select and depending on the radio the following may display: . Auto Door Unlock . Delayed Door Lock


Auto Door Unlock This allows selection of which doors will automatically unlock when the vehicle is shifted into P (Park). Select All Doors, Driver Door, or OFF.


Delayed Door Lock When on, this feature will delay the locking of the doors. See Delayed Locking on page 2-8. Select to enable or disable. Remote Lock/Unlock/Start Select and depending on the radio the following may display: . Remote Unlock Feedback . Remote Unlock Light Feedback . Remote Lock Feedback


. Remote Door Unlock


Remote Unlock Feedback or Remote Unlock Light Feedback When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter. Depending on the radio select Flash Lights or OFF, or select to enable or disable.


Remote Lock Feedback This allows selection of what feedback is provided when unlocking the vehicle with the RKE transmitter. Select Lights and Horn, Lights Only, Horn Only, or Off.


Remote Door Unlock This allows selection of which doors will unlock on the first press of K on the RKE transmitter. Select Driver Door or All Doors.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (38,1)


5-38


Instruments and Controls


If Driver Door is selected, all doors will unlock on the second press of K within five seconds of the prior press. Return to Factory Settings? This returns all of the vehicle personalization settings to the factory settings. Select Yes or No.


Universal Remote System See Radio Frequency Statement on page 13-12.


Universal Remote System Programming


If equipped, these buttons are in the overhead console. This system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. These instructions refer to a garage door opener, but can be used for other devices.


Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process. Keep the original hand-held transmitter for use in other vehicles as well as for future programming. Erase the programming when vehicle ownership is terminated. See “Erasing Universal Remote System Buttons” later in this section. To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (39,1)


Instruments and Controls


5-39


Make sure the hand-held transmitter has a new battery for quick and accurate transmission of the radio-frequency signal. Programming the Universal Remote System For questions or help programming the Universal Remote system, call 1-800-355-3515 or see www.homelink.com. Programming involves time-sensitive actions, and may time out causing the procedure to be repeated. To program up to three devices: 1. Hold the end of the hand-held


transmitter about 3 to 8 cm (1 to 3 in) away from the Universal Remote system buttons with the indicator light in view. The hand-held transmitter was supplied by the manufacturer of the garage door opener receiver.


2. At the same time, press and


hold both the hand-held transmitter button and one of the three Universal Remote system buttons to be used to operate the garage door. Do not release either button until the indicator light changes from a slow to a rapid flash. Then release both buttons. Some garage door openers may require substitution of Step 2
with the procedure under “Radio Signals for Canada and Some Gate Operators” later in this section.


3. Press and hold the newly


programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation.


If the indicator light stays on continuously or the garage door moves when the button is pressed, then


programming is complete. There is no need to complete Steps 4–6. If the indicator light does not come on or the garage door does not move, a second button press may be required. For a second time, press and hold the newly programmed button for five seconds. If the light stays on or the garage door moves, programming is complete. If the indicator light blinks rapidly for two seconds, then changes to a solid light and the garage door does not move, continue with programming Steps 4–6.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (40,1)


5-40


Instruments and Controls


enough for the Universal Remote system to pick up the signal during programming. If the programming did not work, replace Step 2 under “Programming the Universal Remote System” with the following: Press and hold the Universal Remote system button while pressing and releasing the hand-held transmitter button every two seconds until the signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then rapidly. Proceed with Step 3 under “Programming the Universal Remote System” to complete.


does not flash, press and hold the same button a second time for two seconds, then release it. Again, if the door does not move or the garage door lamp does not flash, press and hold the same button a third time for two seconds, then release it.


The Universal Remote system should now activate the garage door. Repeat the process for programming the two remaining buttons. Radio Signals for Canada and Some Gate Operators For questions or programming help call 1-800-355-3515 or see www.homelink.com. Canadian radio-frequency laws and some U.S. gate operators require transmitter signals to time out or quit after several seconds of transmission. This may not be long


Learn or Smart Button 4. After completing Steps 1–3,


locate the Learn or Smart button inside garage on the garage door opener receiver. The name and color of the button may vary by manufacturer.


5. Press and release the Learn or


6.


Smart button. Step 6 must be completed within 30 seconds of pressing this button. Inside the vehicle, press and hold the newly programmed Universal Remote system button for two seconds and then release it. If the garage door does not move or the lamp on the garage door opener receiver


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (41,1)


Instruments and Controls


5-41


Reprogramming a Single Universal Remote System Button To reprogram any of the system buttons: 1. Press and hold any one of the


buttons. Do not release the button.


2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.”


Universal Remote System Operation


Using the Universal Remote System Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted. Erasing Universal Remote System Buttons Erase all programmed buttons when vehicle ownership is terminated. To erase: 1. Press and hold the two outside buttons until the indicator light begins to flash. This should take about 10 seconds.


2. Release both buttons.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (42,1)


5-42


Instruments and Controls


2 NOTES


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (1,1)


Lighting


Exterior Lighting


Exterior Lighting


Exterior Lamp Controls


Exterior Lamp Controls . . . . . . . . 6-1
Headlamp High/Low-Beam


Changer . . . . . . . . . . . . . . . . . . . . . 6-1
Flash-to-Pass . . . . . . . . . . . . . . . . . 6-2
Daytime Running


Lamps (DRL) . . . . . . . . . . . . . . . . 6-2


Automatic Headlamp


System . . . . . . . . . . . . . . . . . . . . . . 6-2
Hazard Warning Flashers . . . . . 6-3
Turn and Lane-Change


Signals . . . . . . . . . . . . . . . . . . . . . . 6-3
Fog Lamps . . . . . . . . . . . . . . . . . . . . 6-4


Interior Lighting


Instrument Panel Illumination


Control . . . . . . . . . . . . . . . . . . . . . . 6-4
Dome Lamps . . . . . . . . . . . . . . . . . 6-4
Reading Lamps . . . . . . . . . . . . . . . 6-5


Lighting Features


Entry Lighting . . . . . . . . . . . . . . . . . 6-5
Battery Load Management . . . . 6-5


The exterior lamp control is on the turn signal lever. There are four positions. O (Exterior Lamp Control): Operates the exterior lamps. Turn to one of the following positions: O (Off): Briefly turn to this position to turn the automatic light control off or on again. AUTO (Automatic Headlamps): Turns the exterior lamps on and off automatically depending on the exterior light. The vehicle will default to the AUTO setting when it is first started.


Lighting


6-1


; (Parking Lamps): Turns on the parking lamps including all lamps, except the headlamps. 5 (Headlamps): Turns on the headlamps, together with the parking lamps and instrument panel lights.


Headlamp High/ Low-Beam Changer 2 3 Headlamp High/Low-Beam Changer: Push the turn signal lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release.


This indicator light turns on in the instrument cluster when the high-beam headlamps are on.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (2,1)


6-2


Lighting


Flash-to-Pass The flash-to-pass feature works with the low beams or Daytime Running Lamps (DRL) on or off. To flash the high beams, pull the turn signal lever all the way toward you, then release it.


Daytime Running Lamps (DRL) The DRL system makes the low-beam headlamps come on at a reduced brightness in daylight when the following conditions are met:


The ignition is on. The exterior lamp control is in AUTO. The transmission is not in P (Park). The light sensor determines it is daytime. The parking brake is released.


Fully functional DRL are required on all vehicles first sold in Canada.


When the DRL are on, the taillamps, sidemarker, instrument panel lights and other lamps will not be on. The instrument cluster will be lit. When the exterior lamp control is turned to 5, the low-beam headlamps come on. The other lamps that come on with the headlamps will also come on. To idle your vehicle with the DRL off, move the shift lever to P (Park). The DRL will stay off until the shift lever is moved out of the P (Park) position. The regular headlamp system should be turned on when needed.


Automatic Headlamp System When it is dark enough outside, the headlamps come on automatically.


Do not cover the light sensor on top of the instrument panel or the headlamps will come on when they are not needed. The system may also turn on the headlamps when driving through a parking garage or tunnel. If the vehicle is started in a dark garage, the automatic headlamp system comes on immediately. If it is light outside when the vehicle leaves the garage, there is a slight delay before the automatic headlamp system changes to the DRL. During that delay, the instrument cluster may not be as bright as usual. Make sure the instrument panel brightness control


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (3,1)


is in the full bright position. See Instrument Panel Illumination Control on page 6-4. Lights On with Wipers If the windshield wipers are activated in daylight with the engine on, and the exterior lamp control is in AUTO, the headlamps, parking lamps, and other exterior lamps come on. The transition time for the lamps coming on varies based on wiper speed. When the wipers are not operating, these lamps turn off. Move the exterior lamp control to P or ; to disable this feature.


Hazard Warning Flashers


Turn and Lane-Change Signals


Lighting


6-3


| (Hazard Warning Flasher): Press to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press | again to turn the flashers off.


Move the lever all the way up or down to signal a turn. An arrow on the instrument cluster will flash in the direction of the turn or lane change. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. If the lever is briefly pressed and released, the turn signal flashes three times. The lever returns to its starting position when it is released. If after signaling a turn or a lane change the arrows flash rapidly or do not come on, a signal bulb may be burned out.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (4,1)


6-4


Lighting


Have any burned out bulbs replaced. If a bulb is not burned out, check the fuse; see Fuses on page 10-30.


Fog Lamps


For vehicles with fog lamps, the control is located on the turn signal lever. Use the fog lamps for better vision in foggy or misty conditions.


# FOG (Fog Lamps): Turn the fog lamp band on the lever to # and release it, to turn the fog lamps on or off. The band will return to its original position. The parking lamps or low-beam headlamps must be on to use the fog lamps. The fog lamps will go off whenever the high-beam headlamps are turned on. When the high-beam headlamps are turned off, the fog lamps will come on again. Some localities have laws that require the headlamps to be on along with the fog lamps.


Interior Lighting


Instrument Panel Illumination Control This control is located on the instrument panel, to the left of the steering column. D (Instrument Panel Brightness): Turn clockwise or counterclockwise to brighten or dim the lights.


Dome Lamps There are front and rear dome lamps. The dome lamp controls are located in the overhead console. To change the settings, press the following: * (Dome Lamp Override): Turns the lamps off, even when a door is open. 1 (Door): The lamps come on automatically when a door is opened.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (5,1)


+ (On): Turns the dome lamps on. The dome lamps can also be turned on and off by pressing the buttons next to the lamps.


Reading Lamps The reading lamps are located on the overhead console. These lamps come on automatically when any door is opened. For manual operation, press the button next to each lamp to turn it on or off.


Lighting Features


Entry Lighting The dome lamp, cargo lamp, and foot lamp inside the vehicle come on when any door is opened, if the dome lamp is in the door position. In addition, these lamps come on when the Remote Keyless Entry (RKE) unlock button is pressed. They stay on for 20 seconds or until a door is opened. After the door is opened and then closed, the light remains on for 20 seconds, or until the ignition is turned to ON/RUN.


Battery Load Management The vehicle has Electric Power Management (EPM) that estimates the battery's temperature and state of charge. It then adjusts the voltage for best performance and extended life of the battery.


Lighting


6-5


When the battery's state of charge is low, the voltage is raised slightly to quickly bring the charge back up. When the state of charge is high, the voltage is lowered slightly to prevent overcharging. If the vehicle has a voltmeter gauge or a voltage display on the Driver Information Center (DIC), you may see the voltage move up or down. This is normal. If there is a problem, an alert will be displayed. The battery can be discharged at idle if the electrical loads are very high. This is true for all vehicles. This is because the generator (alternator) may not be spinning fast enough at idle to produce all of the power needed for very high electrical loads. A high electrical load occurs when several of the following are on, such as: headlamps, high beams, fog lamps, rear window defogger, climate control fan at high speed, heated seats, engine cooling fans, trailer loads, and loads plugged into accessory power outlets.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (6,1)


6-6


Lighting


EPM works to prevent excessive discharge of the battery. It does this by balancing the generator's output and the vehicle's electrical needs. It can increase engine idle speed to generate more power whenever needed. It can temporarily reduce the power demands of some accessories. Normally, these actions occur in steps or levels, without being noticeable. In rare cases at the highest levels of corrective action, this action may be noticeable to the driver. If so, a DIC message might be displayed and it is recommended that the driver reduce the electrical loads as much as possible. See Battery Voltage and Charging Messages on page 5-25.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (1,1)


Phone


Bluetooth (Overview) . . . . . . . . 7-21
Bluetooth (Infotainment


Controls) . . . . . . . . . . . . . . . . . . . 7-22


Bluetooth (Voice


Recognition) . . . . . . . . . . . . . . . 7-26


Trademarks and License Agreements


Trademarks and License


Agreements . . . . . . . . . . . . . . . . 7-32


Infotainment System


Introduction


Infotainment . . . . . . . . . . . . . . . . . . . 7-1
Theft-Deterrent Feature . . . . . . . 7-2
Overview . . . . . . . . . . . . . . . . . . . . . . 7-3
Operation . . . . . . . . . . . . . . . . . . . . . 7-4


Radio


AM-FM Radio . . . . . . . . . . . . . . . . . 7-8
Satellite Radio . . . . . . . . . . . . . . . . 7-9
Radio Reception . . . . . . . . . . . . . 7-11
Multi-Band Antenna . . . . . . . . . . 7-12


Audio Players


CD Player . . . . . . . . . . . . . . . . . . . 7-12
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
Auxiliary Devices . . . . . . . . . . . . 7-16


Infotainment System 7-1


Introduction


Infotainment Base radio information is included in this manual. See the infotainment manual for information on other available infotainment systems. Read the following pages to become familiar with these features.


{ Warning


Taking your eyes off the road for too long or too often while using any infotainment feature can cause a crash. You or others could be injured or killed. Do not give extended attention to infotainment tasks while driving. Limit your glances at the vehicle displays and focus your attention on driving. Use voice commands whenever possible.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (2,1)


To play the infotainment system with the ignition off, see Retained Accessory Power (RAP) on page 9-22.


Theft-Deterrent Feature The theft-deterrent feature works by learning a portion of the Vehicle Identification Number (VIN) to the infotainment system. The infotainment system does not operate if it is stolen or moved to a different vehicle.


7-2


Infotainment System


The infotainment system has built-in features intended to help avoid distraction by disabling some functions when driving. These functions may gray out when they are unavailable. Many infotainment features are also available through the instrument cluster and steering wheel controls. Before driving: . Become familiar with the


operation, faceplate buttons, and screen buttons.


. Set up the audio by presetting


favorite stations, setting the tone, and adjusting the speakers.


. Set up phone numbers in


advance so they can be called easily by pressing a single button or by using a single voice command if equipped with Bluetooth phone capability.


See Defensive Driving on page 9-3.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (3,1)


Overview


Infotainment System 7-3


INFO (Information)


1. VOL/ O (Volume/Power) 2. g SEEK 3. FAV (Favorite Pages) 4. RADIO/BAND 5. Preset Buttons 1–6
6. AUX (Auxiliary) 7. E BACK 8. 9. MENU/SEL (Menu/Select) 10. k (Play/Pause) 11. CD (CD Player) 12. 5 / ? (Phone/Mute) 13. l SEEK 14. H (Clock) 15. CONFIG (Configuration Menu) 16. X (CD Eject) 17. TONE


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (4,1)


7-4


Infotainment System


Operation


Controls The infotainment system is operated by using the pushbuttons, multifunction knobs, display menus, and steering wheel controls, if equipped. Turning the System On or Off VOL/ O (Volume/Power): Press to turn the system on and off.


Automatic Switch-Off If the infotainment system has been turned on after the ignition is turned off, the system will turn off automatically after 10 minutes. Volume Control VOL/ O (Volume/Power): Turn to adjust the volume. MENU/SEL: Turn to select radio stations. Press to show available information about the current station or track.


5 / ? (Mute): For vehicles with OnStar, press and hold 5 / ? to mute the infotainment system. Press and hold 5 / ? again, or turn the VOL/ O knob to cancel mute. For vehicles without OnStar, press 5 / ? to mute the infotainment system. Press 5 / ? again, or turn the VOL/ O knob to cancel mute. Tune Control MENU/SEL: Turn to select radio stations. Press to show available information about the current station or track. Menu System


Controls The MENU/SEL knob and the E BACK button are used to navigate the menu system.


MENU/SEL (Menu/Select): Press to: . Enter the menu system. . Select or activate the highlighted


menu option.


. Confirm a set value.


Turn a system setting on or off.


Turn to: . Highlight a menu option. . Select a value. E BACK: Press to: . Exit a menu. . Return from a submenu screen


to the previous menu screen. . Delete the last character in a


sequence.


RADIO/BAND: Press to: . Display the menu for AM, FM, XM (if equipped), CD, or AUX. Toggle through a menu.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (5,1)


Selecting a Menu Option


Activating a Setting


Turning a Function On or Off


Infotainment System 7-5


1. Turn the MENU/SEL knob to


move the highlighted bar.


1. Turn the MENU/SEL knob to


1. Turn the MENU/SEL knob to


highlight the setting.


highlight the function.


2. Press the MENU/SEL button to


2. Press the MENU/SEL button to


2. Press the MENU/SEL button to


select the highlighted option.


activate the setting.


turn the function on or off.


Submenus


Setting a Value


Entering a Character Sequence


An arrow on the right-hand edge of the menu indicates that it has a submenu with other options.


1. Turn the MENU/SEL knob to


1. Turn the MENU/SEL knob to


change the current value of the setting.


highlight the character.


2. Press the MENU/SEL button to


2. Press the MENU/SEL button to


select the character.


confirm the setting.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (6,1)


7-6


Infotainment System


Press the E BACK button to delete the last character in the sequence or press and hold to delete the entire character sequence. Audio Settings The audio settings can be set for each radio band and each audio player source. To quickly reset an audio setting value to 0: 1. Press the TONE button. 2. Select the audio setting. 3. Press and hold the MENU/SEL button until the value changes to 0.


Press the E BACK button to go back to the Tone Settings menu.


Adjusting the Treble, Midrange, and Bass


3. Select the value. Press the E BACK button to go back to the Tone Settings menu.


Adjusting the EQ (Equalizer) For vehicles that have an equalizer:


1. Press the TONE button. 2. Select Treble, Midrange,


or Bass.


3. Select the value. Press the E BACK button to go back to the Tone Settings menu.


Adjusting the Fader and Balance


1. Press the TONE button. 2. Select Fader or Balance.


1. Press the TONE button. 2. Select EQ. 3. Select the setting. Press the E BACK button to go back to the Tone Settings menu.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (7,1)


Infotainment System 7-7


1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Max Startup Volume. 4. Select the setting. 5. Press the E BACK button to


go back to the System Configuration menu.


System Settings


Configuring the Number of Favorite Pages


wind noise as the vehicle speeds up or slows down, so that the volume level is consistent. The level of volume compensation can be selected, or the auto volume feature can be turned off.


To configure the number of available favorite pages: 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Radio Favorites. 4. Select the number of available


favorite pages.


5. Press the E BACK button to


go back to the System Configuration menu.


Auto Volume The auto volume feature automatically adjusts the radio volume to compensate for road and


1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Auto Volume. 4. Select the setting. 5. Press the E BACK button to


go back to the System Configuration menu.


Maximum Startup Volume The maximum volume played when the radio is first turned on can be set.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (8,1)


7-8


Infotainment System


Radio


AM-FM Radio


Control Buttons The buttons used to control the radio are: RADIO/BAND: Press to turn the radio on and choose between AM, FM, SiriusXM®, if equipped, CD, or AUX. MENU/SEL: Turn to manually search for stations. FAV: Press to open the favorites list. l SEEK or g SEEK: Press to search for stations. Press and hold to scan for stations. k : Press to pause the CD. 1 to 6: Press to select preset stations.


RDS (Radio Data System) The radio may have RDS. The RDS feature is available for use only on FM stations that broadcast RDS information. This feature only works when the information from the radio station is available. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. If this happens, contact the radio station. While the radio is tuned to an FM-RDS station, the station name or call letters display. Radio Menus Radio menus are available for AM and FM. Press the MENU/SEL knob to open the main radio menu for that band. Selecting a Band Press the RADIO/BAND button to choose AM, FM, or SiriusXM, if equipped. The last station that was playing starts playing again.


Selecting a Station


Seek Tuning If the radio station is not known: Briefly press g SEEK or l SEEK, to automatically search for the next available station. If a station is not found, the radio switches to a more sensitive search level. If a station still is not found, the frequency that was last active begins to play. If the radio station is known: Press and hold g SEEK or l SEEK until the station on the display is reached, then release the button.


Manual Tuning Turn the MENU/SEL knob to select the frequency on the display.


Favorites List 1. Press the MENU/SEL knob. 2. Select Favorites List. 3. Select the station.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (9,1)


Station Lists 1. Press the MENU/SEL knob. 2. Select AM Station List or FM


Station List. All receivable stations in the current reception area are displayed. If a station list has not been created, an automatic station search is done.


3. Select the station.


Category Lists Most stations that broadcast an RDS program type code specify the type of programming transmitted. Some stations change the program type code depending on the content. The system stores the RDS stations sorted by program type in the FM category list. To search for a programming type determined by station: 1. Press the MENU/SEL knob. 2. Select FM Category List. A list of all programming types available displays.


3. Select the programming type. A list of stations that transmit programming of the selected type displays.


4. Select the station.


The category lists are updated when the station lists are updated.


Updating Station & Category Lists If stations stored in the station list can no longer be received: 1. Press the MENU/SEL knob. 2. Select Update AM Station List or


Update FM Station List, if the stations stored in the station list are no longer received. A station search will be completed and the first station in the updated list will play.


To cancel the station search, press the MENU/SEL knob.


Infotainment System 7-9


Storing a Station as a Favorite Stations from all bands can be stored in any order in the favorite pages. Up to six stations can be stored in each favorite page and the number of available favorite pages can be set.


Storing a Station as a Favorite To store the station to a position in the list, press the corresponding button 1 to 6 until a beep is heard.


Retrieving Stations Press the FAV button to open a favorite page or to switch to another favorite page. Briefly press one of the 1 to 6 buttons to retrieve the station.


Satellite Radio Vehicles with a SiriusXM® Satellite Radio tuner and a valid SiriusXM Satellite Radio subscription can receive SiriusXM programming.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (10,1)


7-10


Infotainment System


SiriusXM Satellite Radio Service SiriusXM is a satellite radio service based in the 48 contiguous United States and 10 Canadian provinces. SiriusXM Satellite Radio has a wide variety of programming and commercial-free music, coast to coast, and in digital-quality sound. If SiriusXM service needs to be reactivated, the radio will display “No Subscription Please Renew on channel XM1.” A service fee is required to receive the SiriusXM service. For more information, contact SiriusXM at www.siriusxm.com or 1-866-635-2349 (U.S.), and www.xmradio.ca or 1-877-209-0079
(Canada). Control Buttons The buttons used to control the SiriusXM radio are: RADIO/BAND: Press to turn the radio on and choose between AM, FM, and SiriusXM, if equipped.


g SEEK or l SEEK: Press to go to the previous or next station. FAV: Press to open the favorites list. 1 to 6: Press to select preset stations. MENU/SEL: Turn to select stations. Press to open the SiriusXM Satellite Radio menu. Selecting the SiriusXM Band Press the RADIO/BAND button to choose between the AM, FM, and SiriusXM bands. The last channel played in that band begins to play when that band is selected. Removing or Adding Categories SiriusXM channels are organized in categories. Channels in a category that have been removed can still be accessed by using the g SEEK or l SEEK buttons, or the MENU/SEL knob.


To add or remove categories: 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select XM Categories. 4. Turn the MENU/SEL knob to


highlight the category.


5. Press the MENU/SEL knob to


remove or add the category.


Selecting a SiriusXM Channel SiriusXM channels can be selected by using g SEEK, l SEEK, the MENU/SEL knob, or the menu system. Selecting a Channel Using g SEEK or l SEEK . Press and release g SEEK or l SEEK to go to the previous or next channel.


. Press and hold g SEEK or l


SEEK to scroll through the previous or next channel until the channel is reached.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (11,1)


Selecting a Channel Using the MENU/SEL Knob To select an XM channel using the MENU/SEL knob: Turn the MENU/SEL knob to highlight an XM channel. The channel is selected after a short delay. To select a channel using the menu: 1. Turn the MENU/SEL knob and


select XM Channel List.


2. Select the desired channel.


Selecting a Channel Using the Menu System 1. Turn the MENU/SEL knob. 2. Select XM Category List. 3. Select the category. 4. Select the channel.


Storing a SiriusXM Channel as a Favorite Channels from all bands can be stored in any order in the favorite pages.


Up to six channels can be stored in each favorite page and the number of available favorite pages can be set.


Storing a Channel as a Favorite To store the channel to a position in the list, press and hold the corresponding 1 to 6 button until the channel can be heard again.


Retrieving Channels Press the FAV button to open a favorite page or to change to another favorite page. Briefly press one of the 1 to 6 buttons to retrieve the channel.


Turning SiriusXM Channel Graphics On or Off 1. From the Home Page press the


Config screen button or the CONFIG button on the faceplate.


2. Select Radio Settings from the


Config Menu list.


3. Select XM Channel Graphics to


turn on or off.


Infotainment System 7-11


Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet. FM FM signals only reach about 16 to 65 km (10 to 40 mi). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills, causing the sound to fade in and out. AM The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. Static can occur when


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (12,1)


Multi-Band Antenna The multi-band antenna is on the roof of the vehicle. The antenna is used for the AM-FM radio, OnStar, the SiriusXM Satellite Radio Service System, and GPS (Global Positioning System), if the vehicle has these features. Keep the antenna clear of obstructions for clear reception. If the vehicle has a sunroof, and it is open, reception can also be affected.


7-12


Infotainment System


things like storms and power lines interfere with radio reception. When this happens, try reducing the treble on the radio. SiriusXM Satellite Radio Service If equipped, SiriusXM Satellite Radio Service provides digital radio reception. Tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out. In addition, traveling or standing under heavy foliage, bridges, garages, or tunnels may cause loss of the SiriusXM signal for a period of time. Cell Phone Usage Cell phone usage, such as making or receiving phone calls, charging, or just having the phone on may cause static interference with the radio. Unplug the phone or turn it off if this happens.


Audio Players


CD Player See the infotainment manual for more information. The player can be used for CD and MP3 audio. With the vehicle on, insert a disc into the slot, label side up. The player pulls it in and begins playing. While playing, the navigation system is available. The system is capable of playing: . Most audio CDs . CD-R . CD-RW . MP3 or unprotected WMA


formats


When playing any compatible recordable disc, the sound quality can be reduced due to disc quality, the method of recording, the quality


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (13,1)


of the music that has been recorded, or the way the disc has been handled. There can be increased skipping, difficulty in recording tracks, difficulty in finding tracks, and/or difficulty in loading and ejecting. If these problems occur, check the disc for damage or try a known good disc. To avoid damage to the CD player: . Do not use scratched or


damaged discs.


. Do not apply labels to discs. The


labels could get caught in the player. Insert only one disc at a time.


. Keep the loading slot free of foreign materials, liquids, and debris.


. Use a marking pen to label the


top of the disc.


Infotainment System 7-13


Loading and Ejecting Discs To load a disc: 1. Turn the vehicle on. 2.


Insert a disc into the slot, label side up. The player pulls it in the rest of the way. If the disc is damaged or improperly loaded, there is an error and the disc ejects.


The disc automatically plays once loaded. Press X to eject a disc from the CD player. If the disc is not removed within a short period of time, it is automatically pulled back into the player.


Control Buttons The buttons used to control the CD player are: CD: Press to choose between the CD and AUX player. l SEEK or g SEEK: Press to select tracks or to fast forward or rewind within a track.


INFO: Press to display additional information about the CD that may be available. MENU/SEL: Turn to select tracks. X (Eject): Press to remove the CD. k : Press to pause a CD or MP3
track; press again to resume playback.


Playing an Audio CD Press the CD button. If there is a disc in the player it begins playing. Information about the disc and current track is shown on the display depending on the data stored.


Selecting a CD Track Using the control buttons: . Press g SEEK or l SEEK to select the previous or next track. Turn the MENU/SEL knob.


Using the CD Menu: 1. Press the MENU/SEL knob.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (14,1)


7-14


Infotainment System


2. Select Track List. 3. Select the track.


Playing Tracks in Random Order Press the MENU/SEL knob and then set Shuffle Songs to On.


Fast Forward and Rewind Press and hold l SEEK or g SEEK to fast forward or rewind within the current track.


Selecting an MP3 Track Using the control buttons: . Press g SEEK or l SEEK to select the previous or next track. Turn the MENU/SEL knob.


Using the CD Menu: 1. Press the MENU/SEL knob. 2. Select Playlists/Folders. 3. Select the playlist or folder. 4. Select the track.


Searching for MP3 Tracks The search feature may take some time to display the information after reading the disc due to the amount of information stored on the disc. FM automatically plays while the disc is being read. Tracks can be searched by: . Playlists . Artists . Albums . Song Titles . Genres


Folder View


To search for tracks: 1. Press the MENU/SEL knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, Genres, or Folder View. 4. Select the track.


Error Messages If Disc Error displays and/or the disc comes out, it could be for one of the following reasons:


The disc has an invalid or unknown format. The disc is very hot. Try the disc again when the temperature returns to normal. The road is very rough. Try the disc again when the road is smoother. The disc is dirty, scratched, wet, or upside down. The air is very humid. Try the disc again later. There was a problem while burning the disc. The label is caught in the CD player.


If the CD is not playing correctly, for any other reason, try a known good CD.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (15,1)


If any error continues, contact your dealer.


MP3


Playing an MP3 CD See the infotainment manual for more information. To play an MP3 CD, follow the same instructions as “Playing an Audio CD.” The following guidelines must be met when creating an MP3 disc, otherwise the CD might not play: . Sampling rate: 16 kHz,


22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, and 48 kHz.


. Bit rates supported: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256, and 320 kbps.


. Maximum number of folders:


eight folders with 255 files per folder.


. Maximum of 1,000 files on


a disc.


. Recorded on a CD-R or CD-RW


with a maximum capacity of 700 MB. The Artist/Album/Song Titles/ Genre information requires a CD to be fully scanned before the music navigator works with these menus.


MP3 Music Menu Press the Menu screen button while that source is active to access the menu. Press any of the following buttons on the MP3 Menu: Shuffle Songs: Press to play the tracks randomly. Press again to stop shuffle. Playlists: Press to view the playlists stored on the disc. Select a playlist to view the list of all songs in that playlist. There might be a delay before the list displays. Select a song from the list to begin playback. Artists: Press to view the list of artists stored on the disc. Select an artist name to view a list of all songs


Infotainment System 7-15


by the artist. There might be a delay before the list displays. Select a song from the list to begin playback. Albums: Press to view the albums on the disc. Select the album to view a list of all songs on the album. There might be a delay before the list displays. Select a song from the list to begin playback. Song Titles: Press to display a list of all songs on the disc. Songs are displayed as stored on the disc. There might be a delay before the list displays. To begin playback, select a song from the list. Genres: Press to view the genres. Select a genre to view a list of all songs of that genre. Select a song from the list to begin playback. Folders: Press to open a folder list to access the files within the folder structure.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (16,1)


7-16


Infotainment System


Root Directory The root directory is treated as a folder. All files contained directly under the root directory are accessed prior to any root directory folders.


Empty Folders If a root directory or folder is empty or contains only folders, the player advances to the next folder in the file structure that contains a compressed audio file. The empty folder(s) are not displayed or numbered.


No Folder When the CD only contains compressed audio files without any folders or playlists, all files are under the root folder.


File System and Naming The song titles, artists, albums, and genres are taken from the file's ID3
tag and are only displayed if present in the tag. If a song title is not


present in the ID3 tag, the radio displays the file name as the track name.


Portable devices are controlled by using the menu system described in Operation on page 7-4.


Preprogrammed Playlists The radio recognizes preprogrammed playlists; however, there is no editing capability. These playlists are treated as special folders containing compressed audio song files.


Auxiliary Devices See the infotainment manual for more information. This vehicle may have an auxiliary input jack in the center console. Possible auxiliary audio sources include:


Laptop computer


. MP3 player Tape player


The auxiliary input allows portable devices to be connected using the 3.5 mm (1/8 in) input jack or the USB port.


This jack is not an audio output. Do not plug headphones into the auxiliary input jack. Drivers are encouraged to set up any auxiliary device while the vehicle is in P (Park). Connect a 3.5 mm (1/8 in) cable from the auxiliary device to the auxiliary input jack. When a device is connected, the system


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (17,1)


automatically begins playing audio from the device over the vehicle speakers. Playback of an audio device connected to the 3.5 mm auxiliary input jack can only be controlled using the controls on the device. Playing from a USB Port For vehicles with a USB port, the following devices may be connected and controlled by the infotainment system.


iPods®


. PlaysForSure Devices (PFD) . USB Drives


Zunes®


Not all iPods, PFDs, USB Drives, and Zunes are compatible with the infotainment system.


Connecting and Controlling an iPod® Not all iPods can be controlled by the infotainment system.


Connecting an iPod Connect the iPod to the USB port.


Searching for a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres . Audiobooks . Composers To search for tracks: 1. Press the MENU/SEL knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, Podcasts, Genres, Audiobooks, or Composers.


4. Select the track.


Infotainment System 7-17


Shuffle Press the MENU/SEL knob and set Shuffle Songs (Random) to On or Off, then press the E BACK button to return to the main screen. On: Plays tracks in the current folder in random order. Off: Plays tracks in the current folder in sequential order.


Repeat Press the MENU/SEL knob and set Repeat to On or Off, then press the E BACK button to return to the main screen. On: Repeats the current track. Off: Playback starts from the beginning of the current track after the last track finishes.


Connecting and Controlling a PlaysForSure Device (PFD) or Zune Connect the PFD or Zune to the USB port.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (18,1)


7-18


Infotainment System


Searching for a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres To search for tracks: 1. Press the MENU/SEL knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,


Song Titles, Podcasts, or Genres.


4. Select the track.


Shuffle Functionality Press the MENU/SEL knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order.


Off: Plays current tracks in sequential order.


Repeat Functionality Press the MENU/SEL knob and set Repeat to On or Off. Repeat On: Repeats the current track. Repeat Off: Playback starts from the beginning of the current track after the last track finishes.


USB Menu Select any of the following buttons on the USB Menu: Shuffle Songs: Select to play the tracks randomly. Select again to stop shuffle. Playlists: Select to view the playlists stored on the USB. Select a playlist to view the list of all songs in that playlist. There might be a delay before the list displays. Select a song from the list to begin playback.


Artists: Select to view the list of artists stored on the USB. Select an artist name to view a list of all albums by the artist. There might be a delay before the list displays. To select a song, touch All Songs then select a song or touch an album then select a song from the list to begin playback. Albums: Select to view the albums on the USB. Select the album to view a list of all songs on the album. There might be a delay before the list displays. Select a song from the list to begin playback. Song Titles: Select to display a list of all songs on the USB. Songs are displayed as stored on the disc. There might be a delay before the list displays. To begin playback, select a song from the list. Genres: Select to view the genres on the USB. Select a genre to view a list of all songs of that genre. Select a song from the list to begin playback.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (19,1)


Folders: Select to open a folder list to access the files within the folder structure.


File System and Naming The song titles, artists, albums, and genres are taken from the file's ID3
tag and are only displayed if present in the tag. If a song title is not present in the ID3 tag, the radio displays the file name as the track name. Playing from an iPod® This feature supports the following iPod models:


iPod nano® (1st, 2nd, 3rd, and 4th generation) iPod with video (5.0 and 5.5
generation). Video is not shown; only audio is supported. iPod classic® (6th generation) iPod touch® (1st and 2nd generation)


There may be problems with operation and function in the following situations: . When connecting an iPod on


which a more recent version of the firmware is installed than is supported by the infotainment system.


. When connecting an iPod on


which firmware from other providers is installed.


To connect and control an iPod, connect one end of the standard iPod USB cable to the iPod's dock connector. Connect the other end to the USB port in the center console. iPod music information displays on the radio’s display and begins playing through the vehicle’s audio system. The iPod battery recharges automatically while the vehicle is on. When the vehicle is off while an iPod is connected using the iPod


Infotainment System 7-19


USB cable, the iPod battery stops charging and the iPod automatically turns off. If the iPod is an unsupported model, it can still be listened to in the vehicle by connecting to the auxiliary input jack using a standard 3.5 mm (1/8 in) stereo cable. Shuffle Songs: Select to play the tracks randomly. Select again to stop shuffle. Press any of the following buttons on the iPod Menu: Playlists: 1. Press to view the playlists stored


on the iPod.


2. Select a playlist name to view a


list of all songs in the playlist.


3. Select the desired song from the


list to begin playback.


Artists: 1. Press to view the artists stored


on the iPod.


Chevrolet Equinox Owner Manual 7707483) - 2015 - crc - 9/29/14


(GMNA-Localizing-U.S./Canada-


Black plate (20,1)


2. Select an audio book name to

Loading...
x