2012 Chevrolet Cruze Owners Manual

Trunk . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Vehicle Security

Vehicle Security . . . . . . . . . . . . . . 2-14
Vehicle Alarm System . . . . . . . 2-14
Immobilizer . . . . . . . . . . . . . . . . . . 2-14
Immobilizer Operation . . . . . . . 2-14

Exterior Mirrors

Convex Mirrors . . . . . . . . . . . . . . 2-15
Manual Mirrors . . . . . . . . . . . . . . . 2-16
Power Mirrors . . . . . . . . . . . . . . . . 2-16
Folding Mirrors . . . . . . . . . . . . . . . 2-16
Heated Mirrors . . . . . . . . . . . . . . . 2-16

Interior Mirrors

Manual Rearview Mirror . . . . . . 2-17
Automatic Dimming

Rearview Mirror . . . . . . . . . . . . 2-17

Windows

Windows . . . . . . . . . . . . . . . . . . . . . 2-18
Power Windows . . . . . . . . . . . . . 2-18
Sun Visors . . . . . . . . . . . . . . . . . . . 2-20

Roof

Sunroof . . . . . . . . . . . . . . . . . . . . . . 2-21

Chevrolet Cruze Owner Manual - 2012

Black plate (2,1)

2-2

Keys, Doors, and Windows

Keys and Locks

Keys

{ WARNING

Leaving children in a vehicle with the ignition key is dangerous for many reasons. Children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and children could be seriously injured or killed if caught in the path of a closing window. Do not leave the keys in a vehicle with children.

{ WARNING

Leaving children in a vehicle with the Remote Keyless Entry (RKE) transmitter is dangerous for many reasons; children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the RKE transmitter in the vehicle and they could be seriously injured or killed if caught in the path of a closing window. Do not leave the RKE transmitter in a vehicle with children.

The key that is part of the Remote Keyless Entry (RKE) transmitter can be used for the ignition and all locks if the vehicle is a key access vehicle. If the vehicle has the keyless ignition, the key can be used for the locks.

Chevrolet Cruze Owner Manual - 2012

Black plate (3,1)

Keys, Doors, and Windows

2-3

With an active OnStar subscription, an OnStar Advisor may remotely unlock the vehicle. See OnStar® on page 1‑22.

Remote Keyless Entry (RKE) System See Radio Frequency Statement on page 13‑16 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310. If there is a decrease in the RKE operating range: . Check the distance. The

transmitter may be too far from the vehicle.

. Check the location. Other vehicles or objects may be blocking the signal.

. Check the transmitter's battery.

See “Battery Replacement” later in this section. If the transmitter is still not working correctly, see your dealer or a qualified technician for service.

Remote Keyless Entry (RKE) System Operation The transmitter functions will work up to 20 m (65 ft) away from the vehicle. On vehicles with remote start the distance will be greater. Keep in mind that other conditions, such as those previously stated, can impact the performance of the transmitter.

Press the button on the RKE transmitter to extend the key. Press the button and the key blade to retract the key. See your dealer if a new key is needed. Notice: If the keys get locked in the vehicle, it may have to be damaged to get them out. Always carry a spare key. If locked out of the vehicle, see Roadside Assistance Program on page 13‑6.

Chevrolet Cruze Owner Manual - 2012

Black plate (4,1)

2-4

Keys, Doors, and Windows

Pressing Q may also arm the theft-deterrent system. See Vehicle Alarm System on page 2‑14. K (Unlock): Press to unlock the driver door or all doors. See “Door Unlock Options” under Vehicle Personalization on page 5‑34. The turn signal indicators may flash and/or the horn may sound to indicate unlocking. See “Unlock Feedback” under Vehicle Personalization on page 5‑34. Pressing K will disarm the theft-deterrent system. See Vehicle Alarm System on page 2‑14. V (Remote Trunk Release): Press and hold briefly to open the trunk. 7 (Vehicle Locator/Panic Alarm): Press and hold briefly to locate the vehicle. The exterior lamps flash and the horn chirps. Press and hold 7 for at least two seconds to sound the panic alarm. The horn sounds and the

turn signals flash for 30 seconds, or until 7 is pressed again or the vehicle is started. / (Remote Vehicle Start): For vehicles with this feature, press Q and then press and hold / within five seconds to start the engine from outside the vehicle using the RKE transmitter. See Remote Vehicle Start on page 2‑9 for additional information. The buttons on the keys are disabled when there is a key is in the ignition, if equipped. Keyless Access Operation Some vehicles have a keyless access system that lets you lock and unlock the doors and access the trunk without removing the RKE transmitter from your pocket, purse, briefcase, etc. The RKE transmitter should be within 1 m (3 ft) of the door or trunk being opened. If the vehicle has this feature, there will be a body colored touch pad on the outside front door handles.

Q (Lock): Press to lock all doors. The turn signal indicators may flash and/or the horn may sound to indicate locking. See “Locking Feedback” under Vehicle Personalization on page 5‑34. If the driver door is open when Q is pressed, all doors lock except the driver door, if enabled through the vehicle personalization. If the passenger door is open when Q is pressed, all doors lock.

Chevrolet Cruze Owner Manual - 2012

Black plate (5,1)

Keys, Doors, and Windows

2-5

Keyless Unlocking With the RKE transmitter within 1 m (3 ft), approach the front door and pull the handle to unlock and open the door. If the transmitter is recognized, the door will unlock and open. Entering any door other than the driver door will always cause all of the doors to unlock. This is not customizable. To customize which doors unlock when the driver door is opened, see “Door Unlock Options” under Vehicle Personalization on page 5‑34.

Keyless Locking If the vehicle has the keyless access system, this feature allows you to select whether the doors automatically lock during normal vehicle exit. When the vehicle is turned off and all doors become closed, the vehicle will determine how many keyless access transmitters remain in the vehicles interior. If at least one keyless access transmitter has been removed from the interior of the vehicle, the doors will lock after eight seconds. If there are two keyless access transmitters in the vehicle and one is removed, the other will be locked in. A person approaching the outside of the locked vehicle without an authorized keyless access transmitter will not be able to open the door, even with the transmitter in the vehicle.

Lock Sensor

When all doors are closed and the ignition is off, the vehicle can be locked by pressing this area on the door handle. This feature will be available for several minutes after the vehicle has been turned off.

Keyless Trunk Opening Lift up on the touch pad located above the license plate to open the trunk if the RKE transmitter is within range.

Chevrolet Cruze Owner Manual - 2012

Black plate (6,1)

2-6

Keys, Doors, and Windows

Programming Transmitters to the Vehicle Only RKE transmitters programmed to the vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. The vehicle can be reprogrammed so that lost or stolen transmitters no longer work. Any remaining transmitters will need to be reprogrammed. Each vehicle can have up to five transmitters matched to it.

Programming with a Recognized Transmitter (Keyless Access Vehicles Only) A new transmitter can be programmed to the vehicle when there is one recognized transmitter. To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you.

1. Remove the plastic trim piece

from the small storage area next to the accessory power outlet towards the front of the console, to access the transmitter slot. Push the button on the recognized transmitter to extend the key blade. Insert the key blade into the transmitter slot. Insert the vehicle key of the new transmitter into the key lock cylinder located on the outside of the driver door and turn the key to the unlock position five times within 10 seconds.

2.

The Driver Information Center (DIC) displays READY FOR REMOTE #2, 3, 4 or 5.

3. Remove the recognized key and

place the new transmitter into the transmitter slot.

4. Press the ignition. When the

transmitter is learned, the DIC will show that it is ready to program the next transmitter.

5. Remove the transmitter from the transmitter pocket and press K. To program additional transmitters, repeat Steps 3
through 5. When all additional transmitters are programmed, press and hold the ignition for 10 seconds to exit programming mode. Replace the plastic trim piece from the small storage area.

Chevrolet Cruze Owner Manual - 2012

Black plate (7,1)

Keys, Doors, and Windows

2-7

The DIC displays will again show REMOTE LEARN PENDING, PLEASE WAIT.

3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.

Programming without a Recognized Transmitter (Keyless Access Vehicles Only) If there are no currently recognized transmitters available, follow this procedure to program up to five transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the transmitters you wish to program must be with you. 1.

Insert the vehicle key of the transmitter into the key lock cylinder located on the outside of the driver door and turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays REMOTE LEARN PENDING, PLEASE WAIT. 2. Wait for 10 minutes until the

DIC displays PRESS ENGINE START BUTTON TO LEARN and then press the ignition.

4. Remove the plastic trim piece

from the small storage area next to the accessory power outlet towards the front of the console, to access the transmitter slot. Push the button on the recognized transmitter to extend the key blade. Insert the key blade into the transmitter slot.

5. Press the ignition. When the transmitter is learned the DIC will show that it is ready to program the next transmitter.

6. Remove the transmitter from the

transmitter slot and press K. To program additional transmitters, repeat Steps 4
through 6. When all additional transmitters are programmed, press and hold the ignition for 10 seconds to exit programming mode. Replace the plastic trim piece from the small storage area.

Chevrolet Cruze Owner Manual - 2012

Black plate (8,1)

2-8

Keys, Doors, and Windows

Starting the Vehicle with a Low Transmitter Battery If the transmitter battery is weak, the DIC may display NO REMOTE DETECTED when you try to start the vehicle. The REPLACE BATTERY IN REMOTE KEY message may also be displayed at this time.

Battery Replacement Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in the DIC. See “Replace Battery in Remote Key” under Key and Lock Messages on page 5‑31. The battery is not rechargeable. To replace the battery: 1. Push the button on the

transmitter to extend the key blade.

To start the vehicle: 1. Remove the plastic trim piece

from the small storage area next to the accessory power outlet towards the front of the console, to access the transmitter slot.

2. Push the button on the

recognized transmitter to extend the key blade. Insert the key blade into the transmitter slot. 3. With the vehicle in P (Park) or

N (Neutral), press the brake pedal and the ignition button. See Starting the Engine on page 9‑20 for additional information about the vehicle's keyless ignition with pushbutton start. Replace the transmitter battery as soon as possible.

2. Remove the battery cover by

prying it with a finger.

Chevrolet Cruze Owner Manual - 2012

Black plate (9,1)

Keys, Doors, and Windows

2-9

3. Remove the battery by pushing

4.

on the battery and sliding it toward the key blade. Insert the new battery, positive side facing up. Push the battery down until it is held in place. Replace with a CR2032 or equivalent battery.

5. Snap the battery cover back on

to the transmitter.

Remote Vehicle Start The vehicle may have this feature that allows you to start the engine from outside the vehicle. / (Remote Vehicle Start): This button will be on the RKE transmitter if the vehicle has remote start. Vehicles with an automatic climate control system will default to a heating or cooling mode depending on the outside temperature during a remote start. A vehicle without automatic climate control will default to the last used heating or

cooling mode. Once the key is turned to ON/RUN, the climate control system will turn on at the setting the vehicle was last set to. If the vehicle has heated seats, they may come on during a remote start. See Heated Front Seats on page 3‑7 for more information. Laws in some local communities may restrict the use of remote starters. For example, some laws require a person using remote start to have the vehicle in view. Check local regulations for any requirements. There are other conditions which can affect the performance of the transmitter. See Remote Keyless Entry (RKE) System on page 2‑3 for additional information.

Starting the Vehicle To start the engine using the remote start feature: 1. Aim the RKE transmitter at

the vehicle.

2. Press and release Q.

3.

Immediately after completing Step 2, press and hold / until the turn signal lamps flash, or for about two seconds if the vehicle is not in view.

When the engine starts, the parking lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system may come on. The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once. Insert the key and turn it to ON/RUN before driving.

Extending Engine Run Time For a 10-minute extension, repeat Steps 1 through 3 while the engine is still running. The remote start can be extended once. When the remote start is extended, the second 10 minutes will start immediately.

Chevrolet Cruze Owner Manual - 2012

Black plate (10,1)

2-10

Keys, Doors, and Windows

For example, if the engine has been running for five minutes, and 10 minutes are added, the engine will run for a total of 15 minutes. A maximum of two remote starts, or a single start with an extension, are allowed between ignition cycles. After this, the vehicle's ignition switch must be turned to ON/RUN and then back to LOCK/OFF using the key, before the remote start procedure can be used again.

Canceling a Remote Start To cancel a remote start, do one of the following: . Aim the RKE transmitter at the vehicle and press and hold / until the parking lamps turn off. Turn on the hazard warning flashers. Turn the vehicle on and then off.

Conditions in Which Remote Start Will Not Work The remote vehicle start feature will not operate if:

The key is in the ignition. The hood is not closed. The hazard warning flashers are on. The malfunction indicator lamp is on. The engine coolant temperature is too high. The oil pressure is low. Two remote vehicle starts, or a single remote start with an extension, have already been used. The vehicle is not in P (Park).

Door Locks

{ WARNING Unlocked doors can be dangerous.

. Passengers, especially

children, can easily open the doors and fall out of a moving vehicle. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear safety belts properly and the doors should be locked whenever the vehicle is driven.

. Young children who get into

unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it.

(Continued)

Chevrolet Cruze Owner Manual - 2012

Black plate (11,1)

WARNING (Continued)

. Outsiders can easily enter through an unlocked door when slowing or stopping the vehicle. Lock the doors to help prevent this from happening.

To lock or unlock a door from outside the vehicle, use the Remote Keyless Entry (RKE) transmitter. From inside the vehicle, use the power door lock switch or the manual lock knob. Pushing down the manual lock knob on the driver door will lock all doors. The doors can also be unlocked from the inside by pulling the door handle. Pulling the door handle again unlatches the door.

Keys, Doors, and Windows

2-11

Power Door Locks

Automatic Door Locks

Automatic Door Lock The doors are programmed to automatically lock when the shift lever is moved out of P (Park). The automatic door lock feature cannot be disabled. Automatic Door Unlock The doors will automatically unlock when the shift lever is moved into P (Park). See Vehicle Personalization on page 5‑34.

The power door lock switch is on the instrument panel. Q (Lock): Press to lock the doors. K (Unlock): Press to unlock the doors.

Chevrolet Cruze Owner Manual - 2012

Black plate (12,1)

2-12

Keys, Doors, and Windows

Safety Locks The rear door safety locks prevent passengers from opening the rear doors from inside the vehicle.

Doors

Trunk

{ WARNING

Exhaust gases can enter the vehicle if it is driven with the liftgate, trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or liftgate. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle must be driven with the liftgate, or trunk/hatch open:

. Close all of the windows. . Fully open the air outlets on

or under the instrument panel.

(Continued)

Press o { to activate the safety locks on the rear doors. The LED light (A) comes on when activated. The rear door power windows are also disabled. Press o { again to deactivate the lockout switch. If the LED light flashes, the feature may not be working properly.

WARNING (Continued)

. Adjust the Climate Control

system to a setting that brings in only outside air and set the fan speed to the highest setting. See “Climate Control Systems” in the Index.

. If the vehicle has a power liftgate, disable the power liftgate function.

For more information about carbon monoxide, see Engine Exhaust on page 9‑27.

Chevrolet Cruze Owner Manual - 2012

Black plate (13,1)

Keys, Doors, and Windows

2-13

Remote Trunk Release

To open the trunk from outside the vehicle, press the V button on the Remote Keyless Entry (RKE) transmitter, or by pressing the touch pad above the license plate when the doors are unlocked.

If the engine is running, the doors must be unlocked. Vehicles with an automatic transmission must be in P (Park), vehicles with a manual transmission must have the park brake applied. Emergency Trunk Release Handle Notice: Do not use the emergency trunk release handle as a tie-down or anchor point when securing items in the trunk as it could damage the handle. The emergency trunk release handle is only intended to aid a person trapped in a latched trunk, enabling them to open the trunk from the inside.

There is an emergency trunk release handle located inside the trunk on the trunk lid. The release handle can be accessed by folding the rear seatback. See Rear Seats on page 3‑8. Pull the release handle to open the trunk from the inside.

Chevrolet Cruze Owner Manual - 2012

Black plate (14,1)

2-14

Keys, Doors, and Windows

Vehicle Security This vehicle has theft-deterrent features; however, they do not make it impossible to steal.

Vehicle Alarm System This vehicle has a theft alarm system. Arming the System To arm the system, use the power door lock switch or the RKE transmitter to lock the vehicle while exiting with the vehicle turned off. The alarm arms after about 30 seconds after all the doors have been closed. Press Q again and the system arms immediately. The security light, located in the center of the instrument panel, will flash slowly.

Disarming the System To disarm the system press K on the RKE transmitter. Turning off the System Alarm If there is an attempt to open the doors, trunk, or hood without first pressing K on the transmitter, the system alarm will be activated. The exterior lamps will flash and the horn will sound for about 30 seconds. To turn off the system alarm press K on the RKE transmitter.

Immobilizer See Radio Frequency Statement on page 13‑16 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.

Immobilizer Operation This vehicle has a passive theft-deterrent system. The system does not have to be manually armed or disarmed. The vehicle is automatically immobilized when the key is removed from the ignition. The system is automatically disarmed when the vehicle is started with the correct key. The key uses a transponder that matches an immobilizer control unit in the vehicle and automatically disarms the system. Only an authorized key starts the vehicle. The vehicle may not start if the key is damaged.

Chevrolet Cruze Owner Manual - 2012

Black plate (15,1)

The security light, located in the instrument panel cluster, comes on if there is a problem with arming or disarming the theft-deterrent system. When trying to start the vehicle, the security light comes on briefly when the ignition is turned on.

Keys, Doors, and Windows

2-15

If the engine does not start and the security light stays on, there is a problem with the system. Turn the ignition off and try again. If the engine still does not start, and the key appears to be undamaged or the light continues to stay on, try another ignition key. If the engine does not start with the other key, the vehicle needs service. If the vehicle does start, the first key may be damaged. See your dealer who can service the theft-deterrent system and have a new key made. Do not leave the key or device that disarms or deactivates the theft-deterrent system in the vehicle.

Exterior Mirrors

Convex Mirrors

{ WARNING

A convex mirror can make things, like other vehicles, look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on the right. Check the inside mirror or glance over your shoulder before changing lanes.

The passenger side mirror is convex shaped. A convex mirror's surface is curved so more can be seen from the driver seat.

Chevrolet Cruze Owner Manual - 2012

Black plate (16,1)

2-16

Keys, Doors, and Windows

Manual Mirrors

Power Mirrors

Folding Mirrors

Manual Foldaway Mirrors The vehicle has manual folding mirrors. These mirrors can be folded inward to prevent damage when going through an automatic car wash. To fold, pull the mirror toward the vehicle. Push the mirror outward to return it to the original position.

Heated Mirrors The vehicle may have heated mirrors. = (Rear Window Defogger): Press to heat the outside rearview mirrors. See “Rear Window Defogger” under Automatic Climate Control System on page 8‑3 for more information.

Vehicles with a manual mirror adjustment have controls next to each mirror. Adjust the inside rearview mirror by moving it up and down or side to side. Adjust the mirror to avoid glare from the headlamps behind you. Push the tab forward for daytime use and pull it for nighttime use.

Controls for the outside power mirrors are located on the driver door. To adjust the mirror: 1. Turn the selector switch to

L (left) or R (right) to choose the driver or passenger mirror.

2. Move the control to adjust

the mirror.

3. Turn the selector switch to the

O position to deselect the mirror.

Chevrolet Cruze Owner Manual - 2012

Black plate (17,1)

Keys, Doors, and Windows

2-17

Interior Mirrors

Manual Rearview Mirror Hold the mirror in the center to move it for a clearer view of behind your vehicle. Adjust the mirror to avoid glare from the headlamps behind you. Push the tab at the bottom of the mirror forward for daytime use and pull it for nighttime use.

Automatic Dimming Rearview Mirror The vehicle may have an automatic dimming inside rearview mirror. Automatic dimming reduces the glare from the headlamps of the vehicle behind you. The dimming feature and the indicator light come on each time the vehicle is started.

Vehicles with OnStar have three control buttons located at the bottom of the mirror. See your dealer for more information about OnStar and how to subscribe to it. See the OnStar Owner's Guide for more information about the services OnStar provides. Cleaning the Mirror Do not spray glass cleaner directly on the mirror. Use a soft towel dampened with water.

Chevrolet Cruze Owner Manual - 2012

Black plate (18,1)

2-18

Keys, Doors, and Windows

Windows

{ WARNING

Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.

Power Windows

{ WARNING

Leaving children in a vehicle with the keys is dangerous for many reasons. Children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function and they could be seriously injured or killed if caught in the path of a closing window. Do not leave keys in a vehicle with children. When there are children in the rear seat use the window lockout button to prevent unintentional operation of the windows.

The vehicle aerodynamics are designed to improve fuel economy performance. This may result in a pulsing sound when either rear window is down and the front windows are up. To reduce the sound, open either a front window or the sunroof (if equipped).

Chevrolet Cruze Owner Manual - 2012

Black plate (19,1)

Keys, Doors, and Windows

2-19

Express Window Operation Your vehicle may have windows with an express-up or down feature. This feature allows the window to be lowered or raised without holding the switch. Passenger side and rear windows only have express-down. Pull a window switch up or push it down all the way, release it, and the window goes down or up automatically. Stop the window by pushing or pulling the switch. Obstacle Detection Feature If equipped with express-up, and an object is in the path of the window when closing, the window will stop at the obstruction and auto-reverse to a preset factory position. Weather conditions such as severe cold and/ or ice may also cause the window to auto-reverse. The window will return to normal operation once the obstruction or condition is removed.

If conditions prevent the window from closing and the window continues to auto-reverse, it is possible to close the window with the ignition in ON/RUN by holding the window switch in the partially or fully pulled up position. Release of the switch from the partially pulled up position will cause the window to stop. Release of the switch from the fully pulled up position will activate the express-up and related obstacle detection features. Programming the Power Windows If the battery on the vehicle has been recharged or disconnected, or is not working, you will need to reprogram each front power window for the express-up feature to work. Before reprogramming, replace or recharge the vehicle's battery.

The power window switches on the driver door control all four windows. The passenger doors have a window switch that controls that window. Push the switch down to open the window. Pull the front of the switch up to close it. The switches work when the ignition is in ON/RUN, ACC/ ACCESSORY, or in Retained Accessory Power (RAP). See Retained Accessory Power (RAP) on page 9‑23.

Chevrolet Cruze Owner Manual - 2012

Black plate (20,1)

2-20

Keys, Doors, and Windows

To program each front window, follow these steps: 1. With the ignition in ACC/

ACCESSORY or ON/RUN, or when Retained Accessory Power (RAP) is active, close all doors.

2. Press and hold the power

window switch until the window is fully open.

3. Pull the power window switch up

until the window is fully closed. 4. Continue holding the switch up for approximately two seconds after the window is completely closed.

The window is now reprogrammed. Repeat the process for the other windows.

Window Lockout

If the LED light flashes, the feature may not be working properly. Overload Feature If the windows are operated repeatedly in short intervals, the window operation is disabled for a short time.

Sun Visors

The rear window lockout switch is on the driver door. This feature prevents the rear passenger windows from operating, except from the driver position. Press o { to activate the rear window lockout switch. The LED light (A) comes on when activated. The rear door locks are also disabled. Press o { again to deactivate the lockout switch.

Pull the sun visor down to block glare. Detach the sun visor from the center mount to pivot to the side window, or to extend along the rod, if available.

Chevrolet Cruze Owner Manual - 2012

Black plate (21,1)

Keys, Doors, and Windows

2-21

Roof

Sunroof

On vehicles with a sunroof, the switches are on the overhead console. The sunroof only operates when the ignition is in ON/RUN or ACC/ ACCESSORY or in Retained Accessory Power (RAP). See Retained Accessory Power (RAP) on page 9‑23 for more information.

To open or close the sunroof, press the open or close sunroof switch (A) to the first detent position. To express open or close the sunroof with the safety function enabled, press the open or close sunroof switch (A) to the second detent position and release. To stop the movement, press the switch again. To automatically tilt or close the sunroof, press the tilt open or close sunroof switch (B). If an object is in the path of the sunroof while it is closing, the anti-pinch feature will detect the object and stop the sunroof. The sunroof glass panel cannot be opened or closed if the vehicle has an electrical failure.

Dirt and debris may collect on the sunroof seal or in the track. This could cause an issue with sunroof operation, noise, or plugging within the water drainage system. Periodically open the sunroof and remove any obstacles or loose debris. Wipe the sunroof seal and roof sealing area using a clean cloth, mild soap, and water. Do not remove grease from the sunroof.

Sunshade The sunshade is manually operated. Close or open the sunshade by sliding. When the sunroof is opened, the sunshade is always open.

Chevrolet Cruze Owner Manual - 2012

Black plate (22,1)

2-22

Keys, Doors, and Windows

Safety Function If the sunroof has any resistance during automatic closing, it will immediately stop and reverse. To override the safety function, press and hold the close sunroof switch. The sunroof closes without the safety function. To stop the movement, release the switch.

Initializing the Sunroof If the sunroof cannot be fully closed, or the express open or close feature does not function, the sunroof may need to be initialized. This can happen if the battery has been disconnected or the sunroof has been serviced.

To initialize the sunroof: 1. Press the close sunroof switch to the first detent position. Hold the switch in this position for 10 seconds after the sunroof has fully closed.

2. Press the open sunroof switch to the first detent position. Release the switch when the sunroof is fully opened.

3. Press the open sunroof switch to the first detent position and hold for 10 seconds. The sunroof will automatically close. The switch can be released when the sunroof stops.

Chevrolet Cruze Owner Manual - 2012

Black plate (1,1)

Seats and Restraints

3-1

Child Restraints

Older Children . . . . . . . . . . . . . . . 3-33
Infants and Young

Children . . . . . . . . . . . . . . . . . . . . 3-35
Child Restraint Systems . . . . . 3-37
Where to Put the Restraint . . . 3-40
Lower Anchors and Tethers

for Children (LATCH System) . . . . . . . . . . . . . . . . . . . . 3-41

Replacing LATCH System

Parts After a Crash . . . . . . . . . 3-48

Securing Child Restraints

(Rear Seat) . . . . . . . . . . . . . . . . . 3-48

Securing Child Restraints

(Front Passenger Seat) . . . . 3-50

Seats and Restraints

Head Restraints

Head Restraints . . . . . . . . . . . . . . . 3-2

Front Seats

Seat Adjustment . . . . . . . . . . . . . . 3-3
Power Seat Adjustment . . . . . . . 3-4
Reclining Seatbacks . . . . . . . . . . 3-5
Heated Front Seats . . . . . . . . . . . 3-7

Rear Seats

Rear Seats . . . . . . . . . . . . . . . . . . . . 3-8

Safety Belts

Safety Belts . . . . . . . . . . . . . . . . . . 3-10
How to Wear Safety Belts

Properly . . . . . . . . . . . . . . . . . . . . 3-11
Lap-Shoulder Belt . . . . . . . . . . . 3-12
Safety Belt Use During

Pregnancy . . . . . . . . . . . . . . . . . . 3-17
Safety Belt Extender . . . . . . . . . 3-17

Safety System Check . . . . . . . . 3-17
Safety Belt Care . . . . . . . . . . . . . 3-18
Replacing Safety Belt System

Parts after a Crash . . . . . . . . . 3-18

Airbag System

Airbag System . . . . . . . . . . . . . . . 3-19
Where Are the Airbags? . . . . . 3-21
When Should an Airbag

Inflate? . . . . . . . . . . . . . . . . . . . . . 3-23

What Makes an Airbag

Inflate? . . . . . . . . . . . . . . . . . . . . . 3-24

How Does an Airbag

Restrain? . . . . . . . . . . . . . . . . . . . 3-24

What Will You See after an

Airbag Inflates? . . . . . . . . . . . . 3-24

Passenger Sensing

System . . . . . . . . . . . . . . . . . . . . . 3-26

Servicing the Airbag-Equipped

Vehicle . . . . . . . . . . . . . . . . . . . . . 3-30

Adding Equipment to the

Airbag-Equipped Vehicle . . . 3-31
Airbag System Check . . . . . . . . 3-32
Replacing Airbag System

Parts after a Crash . . . . . . . . . 3-32

Chevrolet Cruze Owner Manual - 2012

Black plate (2,1)

3-2

Seats and Restraints

Head Restraints The vehicle's front and rear seats have adjustable head restraints in the outboard seating positions.

{ WARNING

With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/ spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.

Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant's head. This position reduces the chance of a neck injury in a crash.

The height of the head restraint can be adjusted. Pull the head restraint up to raise it. Try to move the head restraint to make sure that it is locked in place. To lower the head restraint, press the button, located on the top of the seatback, and push the head restraint down. Try to move the head restraint after the button is released to make sure that it is locked in place.

Chevrolet Cruze Owner Manual - 2012

Black plate (3,1)

Seats and Restraints

3-3

The front seat outboard head restraints are not designed to be removed. If you are installing a child restraint in the rear seat, see “Securing a Child Restraint Designed for the LATCH System” under Lower Anchors and Tethers for Children (LATCH System) on page 3‑41.

Front Seats

Seat Adjustment

{ WARNING You can lose control of the vehicle if you try to adjust a manual driver seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver seat only when the vehicle is not moving.

To adjust a manual seat: 1. Pull the handle at the front of

the seat.

2. Slide the seat to the desired

position and release the handle.

3. Try to move the seat back and

forth to be sure it is locked in place.

Chevrolet Cruze Owner Manual - 2012

Black plate (4,1)

3-4

Seats and Restraints

Seat Height Adjuster

Seat Cushion Tilt Feature

Power Seat Adjustment

If available, move the lever up or down to manually raise or lower the seat.

Six-Way Manual Seat Shown,

Four-Way Similar

If available, move the lever up or down to raise or lower the front of the seat cushion.

To adjust the power driver seat, if equipped: . Move the seat forward or

rearward by sliding the control forward or rearward.

. Raise or lower the front part of the seat cushion by moving the front of the control up or down.

. Raise or lower the entire seat by moving the rear of the control up or down.

Chevrolet Cruze Owner Manual - 2012

Black plate (5,1)

Seats and Restraints

3-5

{ WARNING

If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked.

To adjust the seatback, see Reclining Seatbacks on page 3‑5 for more information.

Reclining Seatbacks { WARNING You can lose control of the vehicle if you try to adjust a manual driver seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver seat only when the vehicle is not moving.

To recline the seatback: 1. Lift the lever.

If necessary, move the safety belt out of the way to access the lever.

2. Move the seatback to the

desired position, then release the lever to lock the seatback in place.

3. Push and pull on the seatback to

make sure it is locked.

Chevrolet Cruze Owner Manual - 2012

Black plate (6,1)

WARNING (Continued)

The lap belt cannot do its job either. In a crash, the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear the safety belt properly.

Do not have a seatback reclined if the vehicle is moving.

3-6

Seats and Restraints

To return the seatback to an upright position: 1. Lift the lever fully without applying pressure to the seatback, and the seatback returns to the upright position.

2. Push and pull on the seatback to

make sure it is locked. { WARNING

Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job when reclined like this. The shoulder belt cannot do its job because it will not be against your body. Instead, it will be in front of you. In a crash, you could go into it, receiving neck or other injuries.

(Continued)

Chevrolet Cruze Owner Manual - 2012

Black plate (7,1)

Heated Front Seats { WARNING

If you cannot feel temperature change or pain to the skin, the seat heater may cause burns even at low temperatures. To reduce the risk of burns, people with such a condition should use care when using the seat heater, especially for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket, cushion, cover, or similar item. This may cause the seat heater to overheat. An overheated seat heater may cause a burn or may damage the seat.

Seats and Restraints

3-7

The passenger seat may take longer to heat up.

Remote Start Heated Seats When it is cold outside, the heated seats can be turned on automatically during a remote vehicle start. The heated seats will be canceled when the ignition is turned on. Press the control to use the heated seats after the vehicle is started. The heated seat indicator lights on the control do not turn on during a remote start. The temperature performance of an unoccupied seat may be reduced. This is normal. The heated seats will not turn on during a remote start unless the heated seat feature is enabled in the vehicle personalization menu. See Remote Vehicle Start on page 2‑9 and “Remote Start Auto Heat Seats” under Vehicle Personalization on page 5‑34 for more information.

On vehicles with heated front seats, the controls are on the center console. The engine must be running to operate the heated seats.

Press L or M to heat the driver or passenger seat cushion and seatback. Press the control once for the highest setting. With each press of the control, the heated seat will change to the next lower setting, and then the off setting. Three lights indicate the highest setting and one light the lowest.

Chevrolet Cruze Owner Manual - 2012

Black plate (8,1)

3-8

Seats and Restraints

Rear Seats Either side of the rear seatback can be folded. To fold the rear seatbacks: 1. Place the front seatbacks in the upright position. See Reclining Seatbacks on page 3‑5.

Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 2. Unbuckle the rear safety belts and make sure the safety belt buckles are stowed in the pockets in the seat cushion.

3. Make sure the safety belt is in

the guide on top of the seatback. 4. Reach under the safety belt and

pull the lever to unlock the seatback.

A tab near the seatback lever raises when the seatback is unlocked.

5. Fold the seatback forward.

Repeat Steps 1 through 4 for the other seatback, if desired.

Chevrolet Cruze Owner Manual - 2012

Black plate (9,1)

To raise the seatback:

{ WARNING

A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted.

1. Make sure the safety belt is in

the guide on the top of the seatback.

2. Lift the seatback up and push it rearward until it clicks into place. Keep the safety belts clear of the seatback and untwisted. A tab near the seatback lever retracts when the seatback is locked in place. The center rear safety belt may lock when you raise the seatback. If this happens, let the belt go back all the way and start again.

Seats and Restraints

3-9

{ WARNING

If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always pull forward on the top of the seatback at the area of the latch to be sure it is locked.

3. Push and pull on the seatback to

make sure it is locked into position.

4. Repeat Steps 1 through 3 for the

other seatback, if necessary.

Keep the seat in the upright locked position when not in use.

Chevrolet Cruze Owner Manual - 2012

Black plate (10,1)

3-10

Seats and Restraints

Safety Belts This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts.

{ WARNING

Do not let anyone ride where a safety belt cannot be worn properly. In a crash, if you or your passenger(s) are not wearing safety belts, injuries can be much worse than if you are wearing safety belts. You can be seriously injured or killed by hitting things inside the vehicle harder or by being ejected from the vehicle. In addition, anyone who is not buckled up can strike other passengers in the vehicle.

(Continued)

WARNING (Continued)

Why Safety Belts Work

It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, passengers riding in these areas are more likely to be seriously injured or killed. Do not allow passengers to ride in any area of the vehicle that is not equipped with seats and safety belts. Always wear a safety belt, and check that all passenger(s) are restrained properly too.

This vehicle has indicators as a reminder to buckle the safety belts. See Safety Belt Reminders on page 5‑10 for additional information.

When riding in a vehicle, you travel as fast as the vehicle does. If the vehicle stops suddenly, you keep going until something stops you. It could be the windshield, the instrument panel, or the safety belts!

Chevrolet Cruze Owner Manual - 2012

Black plate (11,1)

Seats and Restraints

3-11

There are important things to know about wearing a safety belt properly.

. Sit up straight and always keep

your feet on the floor in front of you.

. Always use the correct buckle

for your seating position.

When you wear a safety belt, you and the vehicle slow down together. There is more time to stop because you stop over a longer distance and, when worn properly, your strongest bones take the forces from the safety belts. That is why wearing safety belts makes such good sense. Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt?

A: You could be — whether you are

wearing a safety belt or not. Your chance of being conscious during and after a crash, so you can unbuckle and get out, is much greater if you are belted.

Q: If my vehicle has airbags, why

should I have to wear safety belts?

A: Airbags are supplemental

systems only; so they work with safety belts — not instead of

them. Whether or not an airbag is provided, all occupants still have to buckle up to get the most protection. Also, in nearly all states and in all Canadian provinces, the law requires wearing safety belts.

How to Wear Safety Belts Properly This section is only for people of adult size. There are special things to know about safety belts and children. And there are different rules for smaller children and infants. If a child will be riding in the vehicle, see Older Children on page 3‑33 or Infants and Young Children on page 3‑35. Follow those rules for everyone's protection. It is very important for all occupants to buckle up. Statistics show that unbelted people are hurt more often in crashes than those who are wearing safety belts.

Chevrolet Cruze Owner Manual - 2012

Black plate (12,1)

3-12

Seats and Restraints

. Wear the lap part of the belt low

and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones and you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries.

. Wear the shoulder belt over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash.

{ WARNING

You can be seriously injured, or even killed, by not wearing your safety belt properly. . Never allow the lap or

shoulder belt to become loose or twisted.

(Continued)

WARNING (Continued)

. Never wear the shoulder belt

under both arms or behind your back.

. Never route the lap or shoulder belt over an armrest.

Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To see how, see “Seats” in the Index.

2. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. If the shoulder portion of a passenger belt is pulled out all the way, the child restraint locking feature may be engaged. If this happens, let the belt go back all the way and start again.

Chevrolet Cruze Owner Manual - 2012

Black plate (13,1)

Seats and Restraints

3-13

If equipped with a shoulder belt height adjuster, move it to the height that is right for you. See “Shoulder Belt Height Adjuster” later in this section for instructions on use and important safety information.

3. Push the latch plate into the

buckle until it clicks. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 3‑17. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.

4. To make the lap part tight, pull

up on the shoulder belt.

To unlatch the belt, push the button on the buckle. The belt should return to its stowed position. Before a door is closed, be sure the safety belt is out of the way. If a door is slammed against a safety belt, damage can occur to both the safety belt and the vehicle.

Chevrolet Cruze Owner Manual - 2012

Black plate (14,1)

3-14

Seats and Restraints

Shoulder Belt Height Adjuster The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions. Adjust the guide so the shoulder portion of the belt is on the shoulder and not falling off of it. The belt should be close to, but not contacting, the neck. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See How to Wear Safety Belts Properly on page 3‑11.

Safety Belt Pretensioners This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the safety belts during the early stages of a moderate to severe frontal and near frontal crash if the threshold conditions for pretensioner activation are met. Pretensioners work only once. If the pretensioners activate in a crash, they will need to be replaced, and probably other new parts for the vehicle's safety belt system. See Replacing Safety Belt System Parts after a Crash on page 3‑18.

Press the release button (A) and move the height adjuster to the desired position. The adjuster can be moved up by pushing the slide/ trim up. After the adjuster is set to the desired position, try to move it down without pushing the release button to make sure it has locked into position.

Chevrolet Cruze Owner Manual - 2012

Black plate (15,1)

Rear Safety Belt Comfort Guides This vehicle may have rear safety belt comfort guides. If not, they are available through the dealer. The guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed and properly adjusted, the comfort guide positions the belt away from the neck and head.

Seats and Restraints

3-15

There is one guide, if equipped, for each outboard passenger position in the rear seat. To install a comfort guide to the safety belt:

2. Place the guide over the belt,

and insert the two edges of the belt into the slots of the guide.

1. Remove the guide from its

storage pocket on the side of the seat.

Chevrolet Cruze Owner Manual - 2012

Black plate (16,1)

3-16

Seats and Restraints

{ WARNING

A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.

3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top.

4. Buckle, position, and release

the safety belt as described previously in this section. Make sure the shoulder portion of the belt is on the shoulder and not falling off of it. The belt should be close to, but not contacting, the neck.

5. To remove and store the comfort

guide, squeeze the belt edges together so that the safety belt can be removed from the guide. Store the guide in its storage pocket on the seatback.

Chevrolet Cruze Owner Manual - 2012

Black plate (17,1)

Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts.

A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.

Seats and Restraints

3-17

Safety System Check Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly. Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job. See your dealer to have it repaired. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away. Make sure the safety belt reminder light is working. See Safety Belt Reminders on page 5‑10 for more information. Keep safety belts clean and dry. See Safety Belt Care on page 3‑18.

The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.

Safety Belt Extender If the vehicle's safety belt will fasten around you, you should use it. But if a safety belt is not long enough, your dealer will order you an extender. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. To help avoid personal injury, do not let someone else use it, and use it only for the seat it is made to fit. The extender has been designed for adults. Never use it for securing child seats. To wear it, attach it to the regular safety belt. For more information, see the instruction sheet that comes with the extender.

Chevrolet Cruze Owner Manual - 2012

Black plate (18,1)

3-18

Seats and Restraints

Safety Belt Care Keep belts clean and dry. { WARNING

Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.

Replacing Safety Belt System Parts after a Crash

{ WARNING

A crash can damage the safety belt system in the vehicle. A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure the safety belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.

After a minor crash, replacement of safety belts may not be necessary. But the safety belt assemblies that were used during any crash may have been stressed or damaged. See your dealer to have the safety belt assemblies inspected or replaced. New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash. Have the safety belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light on page 5‑11.

Chevrolet Cruze Owner Manual - 2012

Black plate (19,1)

Airbag System The vehicle has the following airbags: . A frontal airbag for the driver. . A frontal airbag for the front

outboard passenger.

. A knee airbag for the driver. . A knee airbag for the front

outboard passenger.

. A seat-mounted side impact

airbag for the driver.

. A seat-mounted side impact airbag for the front outboard passenger.

. Seat-mounted side impact airbags for the second row outboard passengers.

. A roof-rail airbag for the driver

and the passenger seated directly behind the driver.

. A roof-rail airbag for the front outboard passenger and the passenger seated directly behind the front outboard passenger.

All vehicle airbags have the word AIRBAG on the trim or on a label near the deployment opening. For frontal airbags, the word AIRBAG is on the center of the steering wheel for the driver and on the instrument panel for the front outboard passenger. For knee airbags, the word AIRBAG is on the lower part of the instrument panel.

Seats and Restraints