2014 Chevrolet Corvette Owners Manual

been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active. See Engine Oil Life System on page 10-16.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (26,1)

5-26

Instruments and Controls

Tire Pressure: Displays the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System on page 10-53 and Tire Pressure Monitor Operation on page 10-54. Best Average Fuel Economy: Displays the average fuel economy, the best fuel economy over the selected distance, and a bar graph showing instantaneous fuel economy. Press p to change the selected distance. Fuel Used/Timer: Displays the approximate liters (L) or gallons (gal) of fuel that have been used since last reset. The fuel used can be reset by pressing and holding SEL while this display is active.

This display can also be used as a timer. To start/stop the timer, press p while this display is active and then SEL to start/stop the timer. The display will show the amount of time that has passed since the timer was last reset. To reset the timer to zero, press and hold SEL or use p to access the menu while this display is active. ECO Index: Aids the driver in determining how efficiently they are driving. This display may also show the number of cylinders the vehicle is running on. See Active Fuel Management® on page 9-25. Speed Limit: Displays sign information, which comes from a roadway database in the onboard navigation.

Engine Hours/Lifetime Revs: Displays the total number of hours the engine has run. It also shows total engine revolutions divided by 10,000.

Head-Up Display (HUD)

{ Warning

If the HUD image is too bright, or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.

If the vehicle is equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The HUD information appears as an image focused out toward the front of the vehicle.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (27,1)

{ Caution

If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.

The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units. The language selection is changed through the radio and the units of measurement is changed through the instrument cluster. See Vehicle Personalization on page 5-43 and “Settings” under Instrument Cluster on page 5-7. The HUD may display different alerts and information for vehicles equipped with these features: . Speedometer

Tachometer

Instruments and Controls

5-27

. Manual Transmission Gear (If

. Upcoming Maneuver from

Equipped)

. Manual Paddle Shift Gear

OnStar Incoming Call

Indicator (If Equipped) These displays on the HUD are for use when using the manual paddle shift controls to shift the transmission. See “Manual Paddle Shift” in Automatic Transmission on page 9-26.

. Shift Light

This light is used for performance driving to indicate that the vehicle's best performance level has been reached to shift the transmission into the next higher gear. An arrow pointing up will light up on the display just prior to reaching the engine fuel cut-off mode.

. G-Force Gauge . Audio Information . Upcoming Maneuver from

OnBoard Navigation

The HUD control is to the left of the steering wheel on the instrument panel. To adjust the HUD image so that items are properly displayed: 1. Adjust the driver seat. 2. Start the engine. Use the following settings to adjust the HUD. $ (Image Adjustment): Press down or lift up to adjust the vertical position of the HUD image in the windshield.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (28,1)

5-28

Instruments and Controls

! (Display View): Press to select the display view. Each press will cause the display view to change to the next view. If vehicle messages are displayed, pressing the DIC select button may clear the message. See Driver Information Center (DIC) on page 5-24. D (Image Brightness): Lift up and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off. The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed. The HUD image can temporarily light up depending on the angle and position of the sunlight on the HUD display. This is normal. Polarized sunglasses could make the HUD image harder to see.

Display Views There are several HUD views that can be displayed:

English

English

Metric

Tour: Displays the vehicle speed, gear position, shift indicator, and driver mode.

Metric

Sport: Displays the vehicle speed, a circular tachometer, gear position, shift indicator, and G-Force meter.

English

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (29,1)

Instruments and Controls

5-29

Timing: Displays a linear tachometer, gear position, shift lights, and performance or lap timer. The performance or lap timer content displayed depends on which feature is currently in use in the instrument cluster. See Instrument Cluster on page 5-7.

Interrupts The interrupt information temporarily displays in any HUD view. Once displayed, HUD returns to the previous HUD view. Interrupts may include: . Audio Information . Navigation Turn-by-Turn

Information Incoming Call Information

. Vehicle Alerts

English

Metric

Audio: May display when a new source, radio station, or media type is selected.

English

Metric

Track: Displays the vehicle speed, a linear tachometer, gear position, shift lights, and G-Force meter.

English

Metric

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (30,1)

5-30

Instruments and Controls

Metric

Metric

Metric

Navigation: Turn-by-turn navigation information may be displayed when Navigation is active and an upcoming maneuver is pending. It appears until the maneuver is complete and then the HUD display returns to the previous view.

Phone: May display when an incoming call is received from either OnStar or a Bluetooth connected phone. It appears momentarily until the call is answered or ignored.

English

English

Vehicle Alerts: Alerts can be dismissed in the instrument cluster. All alerts are not displayed in the HUD. Care of the HUD Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image. Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (31,1)

Instruments and Controls

5-31

HUD Troubleshooting Check that: . Nothing is covering the

HUD lens.

. HUD brightness setting is not

too dim or too bright.

. HUD is adjusted to the proper

height.

. Polarized sunglasses are

not worn.

. Windshield and HUD lens are

clean.

If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. See Windshield Replacement on page 10-33.

Vehicle Messages Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other. The messages that do not require immediate action can be acknowledged and cleared by pressing SEL. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem. The following are some of the vehicle messages that may be displayed depending on the vehicle content.

Battery Voltage and Charging Messages

BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off unnecessary accessories to allow the battery to recharge. LOW BATTERY This message is displayed when the battery voltage is low. See Battery on page 10-30. SERVICE BATTERY CHARGING SYSTEM This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (32,1)

5-32

Instruments and Controls

Brake System Messages

BRAKE FLUID LOW This message is displayed when the brake fluid level is low. See Brake Fluid on page 10-28. RELEASE PARKING BRAKE This message is displayed if the Electric Parking Brake is on while the vehicle is in motion. See Electric Parking Brake on page 9-34. SERVICE BRAKE ASSIST This message may be displayed when there is a problem with the brake boost assist system. When this message is displayed, the brake boost assist motor might be heard operating and you might notice pulsation in the brake pedal. This is normal under these conditions. Take the vehicle to your dealer for service.

SERVICE PARKING BRAKE This message is displayed when there is a problem with the parking brake. Take the vehicle to your dealer for service. STEP ON BRAKE TO RELEASE PARK BRAKE This message is displayed if you attempt to release the Electric Parking Brake without the brake pedal applied. See Electric Parking Brake on page 9-34.

Compass Messages Dashes may be displayed if the vehicle temporarily loses communication with the Global Positioning System (GPS).

Convertible Top Messages The following messages are for vehicles with a power convertible top.

ATTACH TRUNK PARTITION TO OPERATE TOP This message displays and a sound will be heard if the trunk partition is not in place. Open the hatch/trunk and make sure the trunk partition is secure and no objects are on the trunk partition. BATTERY VOLTAGE TOO LOW – TOP DISABLED This message displays when the battery voltage is too low to operate the convertible top. CLOSE TRUNK TO MOVE TOP This message displays if the trunk is open while you are trying to operate the convertible top. Make sure the trunk is closed before operating the convertible top. FOLDING TOP MOTION COMPLETE This message displays when the top successfully completes an open/ close cycle.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (33,1)

FOLDING TOP NOT SECURE COMPLETE TOP MOTION This message occurs if the top is not secure. Several beeps will sound. Complete the power open or power close cycle for the top. If it is not possible to move the top to a fully open or fully closed position, make sure that all objects are clear of the path of the top system components. ONLY MANUAL OPERATION OF TOP POSSIBLE This message indicates that the position of the top cannot be fully determined by the power convertible top controls. Try moving the top in the other direction. This message will also be displayed if a fault is detected by the convertible top controls. See “Manual Movement of Top” under Convertible Top on page 2-28.

Instruments and Controls

5-33

REDUCE VEHICLE SPEED TO OPERATE TOP This message is displayed when the vehicle speed exceeds or is approaching the convertible top speed cut off. TEMPERATURE TOO LOW – TOP DISABLED This message displays and a sound will be heard when the power convertible top button is pressed and it is too cold to operate the power convertible top. Move the vehicle to a warmer location and wait for the vehicle temperature to rise. This may take several hours depending on the initial vehicle temperature and the temperature of the new location. TOP NOT SECURE This message displays when the power convertible top is not completely opened or closed. Press and hold the convertible top button until the top is fully opened or closed. This is indicated by the

FOLDING TOP MOTION COMPLETE message being displayed and an audible indicator. TOP POWERING DOWN COMPLETE TOP MOTION This message displays when the power convertible top can no longer hold the top in an intermediate position. Top system components may move during this time based on external forces. Keep objects clear from the normal path of movement for the top system components. TOP SYSTEM OVERHEATED, PLEASE WAIT This message displays and a sound will be heard when the power convertible top button is pressed and the power convertible top pump motor temperature is overheated. Wait for the power convertible top pump motor to cool down before using the power convertible top.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (34,1)

5-34

Instruments and Controls

VALET SWITCH ACTIVE – TOP DISABLED This message displays when Valet Mode is active.

Cruise Control Messages

CRUISE SET TO XXX This message displays when the cruise control is set and shows the speed it was set to. See Cruise Control on page 9-47.

Door Ajar Messages

DOOR OPEN A door open symbol will display on the DIC showing which door is open. If the vehicle has been shifted out of P (Park), a DOOR OPEN message will also be displayed. If the shift lever is in M (Manual Mode), the DOOR OPEN message will display if the vehicle starts to move. Close the door completely.

HOOD OPEN This message will display along with a hood open symbol when the hood is open. Close the hood completely. TRUNK OPEN This message will display along with a symbol when the trunk is open. Close the trunk completely.

Engine Cooling System Messages

A/C OFF DUE TO HIGH ENGINE TEMP This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air conditioning compressor turns back on. The vehicle can continue to be driven.

If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine. ENGINE OVERHEATED — IDLE ENGINE This message displays when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down. ENGINE OVERHEATED — STOP ENGINE This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (35,1)

Instruments and Controls

5-35

Engine Oil Messages

CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the Oil Life System. See Engine Oil Life System on page 10-16, Driver Information Center (DIC) on page 5-24, Engine Oil on page 10-10, and Maintenance Schedule on page 11-3. ENGINE OIL HOT, IDLE ENGINE This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down. ENGINE OIL LOW — ADD OIL On some vehicles, this message displays when the engine oil level may be too low. Check the oil level before filling to the recommended level. If the oil is not low and this

message remains on, take the vehicle to your dealer for service. See Engine Oil on page 10-10. OIL PRESSURE LOW — STOP ENGINE This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer. UPSHIFT NOW, ENGINE PROTECTION ACTIVE This message indicates the engine controls have taken action to prevent an oil starvation condition. This may reduce the available engine power, or on automatic transmission equipped vehicles force an upshift to a higher gear.

Engine Power Messages

ENGINE POWER IS REDUCED This message displays when the vehicle's engine power is reduced. Reduced engine power can affect the vehicle's ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.

Fuel System Messages

FUEL LEVEL LOW This message displays when the vehicle is low on fuel. Refuel as soon as possible.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (36,1)

5-36

Instruments and Controls

Key and Lock Messages

NO REMOTE DETECTED This message displays when the transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation on page 2-3. NO REMOTE KEY WAS DETECTED PLACE KEY IN TRANSMITTER POCKET THEN START YOUR VEHICLE This message displays when trying to start the vehicle if an RKE transmitter is not detected. The transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation on page 2-3.

NO REMOTE PRESS BRAKE TO RESTART This message displays if the RKE transmitter is no longer detected in the vehicle. Press the brake pedal to restart the vehicle. NUMBER OF KEYS PROGRAMMED This message displays when programming new keys to the vehicle. REMOTE LEFT IN VEHICLE This message displays when leaving the vehicle with the RKE transmitter still inside. REPLACE BATTERY IN REMOTE KEY This message displays when the battery in the RKE transmitter needs to be replaced.

Lamp Messages

AUTOMATIC LIGHT CONTROL ON/OFF This message is displayed when the automatic light control has been turned on or off. See Automatic Headlamp System on page 6-3. TURN SIGNAL ON This message is displayed if the turn signal has been left on. Turn off the turn signal.

Ride Control System Messages

COMPETITIVE DRIVING MODE This message displays and a sound will be heard when the Competitive Driving mode is selected. The instrument cluster light will be on when the Competitive Driving mode is selected. Launch Control is available when this mode is selected. The Traction Control System (TCS) will not be operating

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (37,1)

Instruments and Controls

5-37

while in the Competitive Driving mode. Adjust your driving accordingly. See Competitive Driving Mode on page 9-42, including the “Launch Control” information. MAXIMUM SPEED 129 km/h (80 MPH) This message displays when a malfunction is present in the Selective Ride Control system. The vehicle speed will be limited to a value determined by the vehicle when the shock absorber system has failed and the shocks are in their full soft mode. Have the vehicle serviced by your dealer as soon as possible. To acknowledge the message, press the SEL button. The message reappears every 10 minutes until this condition changes.

PERF TRAC 1 – WET ACTIVE HANDLING ON This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control and StabiliTrak system are available but intended for use on wet race track conditions. Adjust your driving accordingly. This system is available only on models with FE4 – Z51 Performance Package and Magnetic Selective Ride Control. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-42 for more information about the use of this mode.

PERF TRAC 2 – DRY ACTIVE HANDLING ON This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control and StabiliTrak system are available but intended for use on dry race track conditions. Adjust your driving accordingly. This system is available only on models with FE4. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-42 for more information about the use of this mode.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (38,1)

5-38

Instruments and Controls

PERF TRAC 3 – SPORT ACTIVE HANDLING ON This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control and StabiliTrak system are available but intended for use on dry race track conditions. Adjust your driving accordingly. This system is available only on models with FE4. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-42 for more information about the use of this mode.

PERF TRAC 4 – SPORT ACTIVE HANDLING OFF This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control is available but intended for use on dry race track conditions. The StabiliTrak system is disabled when this mode is selected. This mode will require more driver skill than modes 1–3. Adjust your driving accordingly. This system is available only on models with FE4. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-42 for more information about the use of this mode.

PERF TRAC 5 – RACE ACTIVE HANDLING OFF This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control is available but intended for use on dry race track conditions. The StabiliTrak system is disabled when this mode is selected. This mode will require more driver skill than modes 1–4. Adjust your driving accordingly. This system is available only on models with FE4. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-42 for more information about the use of this mode.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (39,1)

REAR AXLE OFF If this message is displayed, the Electronic Limited-Slip Rear (if equipped) is not operational. Drive with caution. Avoid high speeds, aggressive driving, and sharp cornering. The system could be overheated. Allow the system to cool. If this message remains on, see your dealer for service. The vehicle is safe to drive, however, continue to drive with caution. When this message is displayed, the vehicle’s handling capabilities will be reduced during severe maneuvers. StabiliTrak will be affected. See Traction Control/ Electronic Stability Control on page 9-36.

Instruments and Controls

5-39

SERVICE STABILITRAK This message displays if there is a problem with the StabiliTrak system and the vehicle needs service. The StabiliTrak system light on the instrument cluster also turns on and a sound will be heard. See your dealer. When this message is displayed, the system is not working. Adjust your driving accordingly. See Traction Control/ Electronic Stability Control on page 9-36. SERVICE TRACTION SYSTEM If this message displays when you are driving, there is a problem with the Traction Control System (TCS) and the vehicle needs service. See your dealer. When this message is displayed, the system will not limit wheel spin. Adjust your driving accordingly. The traction control system (TCS) light on the instrument cluster will also turn on and a sound will be heard.

When this message is displayed, the computer controlled systems will not assist the driver in controlling the vehicle. Have the system repaired by your dealer as soon as possible. Adjust your driving accordingly. See Traction Control/ Electronic Stability Control on page 9-36. To acknowledge the message, press the SEL button. SHOCKS INOPERATIVE This message displays when a malfunction is present in the Selective Ride Control system, which is causing the shocks to be in their full soft mode. This is a warning to the driver that the vehicle handling may be affected. Have the vehicle serviced by your dealer as soon as possible. To acknowledge the message, press the SEL button. The message reappears every 10 minutes until this condition changes.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (40,1)

5-40

Instruments and Controls

Airbag System Messages

SERVICE AIRBAG This message displays if there is a problem with the airbag system. Take the vehicle to your dealer for service.

Security Messages

THEFT ATTEMPTED This message displays if the vehicle detects a tamper condition.

Service Vehicle Messages

PROGRAM CLUSTER This message is displayed if there is a problem with the instrument cluster. Take the vehicle to your dealer for service.

SERVICE POWER STEERING This message is displayed if there is a problem with the power steering system and a chime may sound. Take the vehicle to your dealer for service. SERVICE REAR AXLE If there is a problem detected with the Electronic Limited-Slip Rear Axle, this message displays. When displayed, the system is not operational and driving should be adjusted accordingly. Take the vehicle to your dealer for service as soon as possible. When this message is displayed, the vehicle’s handling capabilities will be reduced during severe maneuvers. StabiliTrak will be affected. See Traction Control/ Electronic Stability Control on page 9-36.

SERVICE VEHICLE SOON This message is displayed if there is a problem with the vehicle. Take the vehicle to your dealer for service.

Starting the Vehicle Messages

PRESS BRAKE TO START VEHICLE This message is displayed when attempting to start an automatic transmission equipped vehicle without first pressing the brake pedal. PRESS CLUTCH TO START This message is displayed when attempting to start a manual transmission equipped vehicle without first pressing the clutch pedal.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (41,1)

Instruments and Controls

5-41

This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire. The low tire pressure warning light will also come on. See Tire Pressure Light on page 5-21. If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires on page 10-43, Vehicle Load Limits on page 9-14, and Tire Pressure on page 10-51. You can receive more than one tire pressure message at a time. The DIC also shows the tire pressure values. See Driver Information Center (DIC) on page 5-24.

SERVICE KEYLESS START SYSTEM This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service.

Tire Messages

SERVICE TIRE MONITOR SYSTEM This message displays if there is a problem with the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor Operation on page 10-54. TIRE LEARNING ACTIVE This message displays when the system is learning new tires. See Tire Pressure Monitor Operation on page 10-54. TIRE LOW ADD AIR TO TIRE This message displays when the pressure in one or more of the tires is low.

Transmission Messages

1-4 SHIFT This message displays on a manual transmission vehicle when you can only shift from 1 (First) to 4 (Fourth) instead of 1 (First) to 2 (Second). PERFORMANCE SHIFT ACTIVE This message appears when the vehicle is in Sport or Track mode and either Performance Algorithm Shift/Performance Algorithm Liftfoot transmission modes have been entered. SERVICE TRANSMISSION This message displays if there is a problem with the transmission. See your dealer. SHIFT DENIED This message displays when attempting to shift to a gear not appropriate for the vehicle speed and engine revolutions per minute (rpm).

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (42,1)

5-42

Instruments and Controls

SHIFT TO PARK This message displays when the transmission needs to be shifted to P (Park). This may appear when attempting to remove the key from the vehicle if the vehicle is not in P (Park). TRANSMISSION HOT — IDLE ENGINE This message displays and a chime sounds if the transmission fluid in the vehicle gets hot. Driving with the transmission fluid temperature high can cause damage to the vehicle. Stop the vehicle and let it idle to allow the transmission to cool. This message clears when the fluid temperature reaches a safe level. If this message is displayed during normal vehicle operation on flat roads, the vehicle may need service. See your dealer for an inspection.

Vehicle Reminder Messages

ICE POSSIBLE DRIVE WITH CARE This message is displayed when ice conditions are possible. TURN WIPER CONTROL TO INTERMITTENT FIRST This message is displayed when attempting to adjust the intermittent wiper speed without intermittent selected on the wiper control. See Windshield Wiper/Washer on page 5-2.

Vehicle Speed Messages

SPEED LIMIT EXCEEDED This message is displayed when the vehicle speed is greater than the speed warning speed. See "Speed Warning" under Instrument Cluster on page 5-7.

SPEED LIMIT SET TO XXX This message is displayed when the speed warning is set. See "Speed Warning" under Instrument Cluster on page 5-7.

Washer Fluid Messages

WASHER FLUID LOW ADD FLUID This message may display when the washer fluid level is low. See Washer Fluid on page 10-26.

Window Messages

OPEN, THEN CLOSE DRIVER/ PASSENGER WINDOW This message is displayed when the window needs to be reprogrammed. If the vehicle's battery has been recharged or disconnected, you will need to program each front window for the express-up feature to work. See Power Windows on page 2-22.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (43,1)

Vehicle Personalization Use the audio system controls to access the personalization menus for customizing vehicle features. The following are all possible personalization features. Depending on the vehicle, some may not be available.

Infotainment System Audio System Controls To access the personalization menu: 1. Press SETTINGS on the Home

Page on the infotainment system display.

2. Press the desired feature to

display a list of available options.

3. Press to select the desired

feature setting.

4. Press o BACK on the faceplate or press the Back screen button to return to the previous menu.

Instruments and Controls

5-43

Personalization Menus The following list of menu items may be available:

Time and Date

. Driving Mode

Language [Language]

. Valet Mode . Radio . Vehicle . Bluetooth . Voice . Display . Rear Camera . Return to Factory Settings . Software Information Each menu is detailed in the following information. Time and Date Manually set the time and date. See Clock on page 5-4.

Driving Mode Select and the following may be displayed: . Engine Sound Management . Steering . Suspension

Engine Sound Management This allows the Engine Sound Management feature to be turned on or off. Select Auto (Mode Selector) or Off.

Steering This allows the Steering feature to be turned on or off. Select Auto (Mode Selector), Tour, Sport, or Track.

Suspension This allows the Suspension feature to be turned on or off. Select Auto (Mode Selector), Tour, Sport, or Track.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (44,1)

5-44

Instruments and Controls

Language [Language] Select the Language menu and the following may be displayed: . English US

Francais Canadien

. Espanol Latino Select the language. The selected language will display on the system, and voice recognition will reflect the selected language. Valet Mode This will lock the infotainment system, the infotainment controls, and screen storage location. To turn Valet Mode on and off, enter a four-digit code on the keypad. Press Enter to go to the confirmation screen. Re-enter the four-digit code. Press LOCK to lock the system. Enter the four-digit code to unlock the system. Press the Back screen button to go back to the previous menu.

Radio Press to display the Radio Menu and the following may displayed: . Manage Favorites . Number of Favorites Shown . Audible Touch Feedback . Bose Audio Pilot . Maximum Start Up Volume

Manage Favorites This allows favorites to be edited. See “Manage Favorites” in “Settings” under “Radio” in the infotainment manual.

Number of Favorites Shown Press to set the number of favorites to display. Select the desired number or select Auto and the infotainment system will automatically adjust the number of favorites shown.

Audible Touch Feedback This allows Audible Touch Feedback to be turned on or off. Select Off or On.

Bose Audio Pilot This feature adjusts the volume based on the noise in the vehicle. See “Bose AudioPilot Noise Compensation Technology” under “Infotainment System Settings” in the infotainment manual. Select Off or On.

Maximum Start Up Volume This feature sets the maximum startup volume. If the vehicle is started and the volume is greater than this level, the volume is adjusted to this level. To set the maximum startup volume, press + or − to increase or decrease.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (45,1)

Instruments and Controls

5-45

Vehicle Select and the following may be displayed: . Climate and Air Quality . Comfort and Convenience

Lighting

. Power Door Locks . Remote Lock, Unlock, Start

Climate and Air Quality Select and the following may be displayed: . Auto Fan Max Speed . Auto Defog

Auto Fan Max Speed This feature will set the maximum auto fan speed. Select Low, Medium, or High.

Auto Defog When set to On, the front defog will automatically react to temperature and humidity conditions that may cause fogging.

Select Off or On.

Select Off or On.

Comfort and Convenience Select and the following may be displayed: . Auto Memory Recall . Easy Exit Options . Chime Volume . Reverse Tilt Mirror

Auto Memory Recall This feature automatically recalls the current driver’s previously stored 1 or 2 button positions when entering the vehicle. See Memory Seats on page 3-4. Select Off or Off. On some vehicles select Off, On - Driver Door Open, or On - At Ignition On.

Easy Exit Options This feature automatically recalls the current driver’s previously stored EXIT button position when exiting the vehicle. See Memory Seats on page 3-4.

Chime Volume This allows the selection of the chime volume level. Press + or − to adjust the volume.

Reverse Tilt Mirror This allows the feature to be turned on or off. Select Off, On - Driver and Passenger, On - Driver, or On - Passenger.

Lighting Select and the following may be displayed: . Vehicle Locator Lights . Exit Lighting

Vehicle Locator Lights This feature will flash the exterior lamps when K on the Remote Keyless Entry (RKE) transmitter is pressed to locate the vehicle. Select Off or On.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (46,1)

5-46

Instruments and Controls

Exit Lighting This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside. Select Off, 30 Seconds, 60 Seconds, or 120 Seconds.

Power Door Locks Select and the following may be displayed: . Unlocked Door Anti-Lockout . Auto Door Unlock . Delayed Door Lock

Unlocked Door Anti-Lockout When on, this feature will keep the driver door from locking when the door is open. If Off is selected, the Delayed Door Lock menu will be available. Select Off or On.

Auto Door Unlock This allows selection of which of the doors will automatically unlock when the vehicle is shifted into P (Park) with an automatic transmission or when the vehicle is turned off with a manual transmission. Select Off, All Doors, or Driver Door.

Delayed Door Lock When on, this feature will delay the locking of the doors. To override the delay, press the power door lock switch on the door. Select Off or On.

Remote Lock, Unlock, Start Select and the following may be displayed: . Remote Unlock Light Feedback . Remote Lock Feedback . Remote Door Unlock . Remote Start Auto Cool Seats . Remote Start Auto Heat Seats . Passive Door Unlock

. Passive Door Lock . Remote Left in Vehicle Alert

Remote Unlock Light Feedback When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter. Select Off or Flash Lights.

Remote Lock Feedback This allows selection of what type of feedback is given when locking the vehicle with the RKE transmitter. Select Off, Lights and Horn, Lights Only, or Horn Only.

Remote Door Unlock This allows selection of which doors will unlock when pressing K on the RKE transmitter. Select All Doors or Driver Door.

Remote Start Auto Cool Seats If equipped and turned on, this feature will turn the ventilated seats on when using remote start on warm days.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (47,1)

Instruments and Controls

5-47

Select Off or On.

Remote Start Auto Heat Seats If equipped and turned on, this feature will turn the heated seats on when using remote start on cold days. Select Off or On.

Passive Door Unlock This allows the selection of what doors will unlock when using the button on the driver door to unlock the vehicle. Select All Doors or Driver Door.

Passive Door Lock This feature can be turned on or off, or can be used to select feedback when using the button on the driver door to lock the vehicle. See Remote Keyless Entry (RKE) System Operation on page 2-3. Select Off, On with Horn Chirp, or On.

Remote Left in Vehicle Alert This feature sounds an alert when the RKE transmitter is left in the vehicle. Select Off or On. Bluetooth Select and the following may be displayed: . Pair New Device . Device Management . Ringtones . Voice Mail Numbers

Pair New Device Select to pair a new device. See “Pairing” in “Infotainment Controls” under “Bluetooth” in the infotainment manual.

Device Management Select to connect to a different phone source, disconnect a phone, or delete a phone.

Ringtones Press to change the ring tone for the specific phone. The phone does not need to be connected to change the ring.

Voice Mail Numbers This feature displays the voice mail number for all connected phones. To change the voice mail number, select EDIT or press the EDIT button. Type a new number, then select SAVE or press the SAVE button. Voice Select and the following may be displayed: . Confidence Threshold . Prompt Length . Audio Feedback Speed

Confidence Threshold This feature allows the adjustment of the sensitivity of the speech recognition system.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (48,1)

5-48

Instruments and Controls

Select Confirm More or Confirm Less.

Prompt Length This feature adjusts the voice prompt length. Select Short or Long.

Audio Feedback Speed This feature adjusts the audio feedback speed. Select Slow, Medium, or Fast. Display Select and the following may be displayed: . Mode . Calibrate Touchscreen

Turn Display Off

Mode Select to change the display screen for day or night driving. Select Auto, Day, or Night.

Calibrate Touchscreen Select to calibrate the touchscreen, then follow the prompts.

Turn Display Off Select to turn the display off. Press anywhere on the display area or any faceplate button to turn the display on. Rear Camera Select and the following may be displayed: . Guidance Lines

Guidance Lines Select to turn Off or On. See “Guidance Lines” in Rear Vision Camera (RVC) on page 9-49. Return to Factory Settings Select and the following may be displayed: . Restore Vehicle Settings . Clear All Private Data . Restore Radio Settings

Restore Vehicle Settings This allows selection of restoring vehicle settings. Select Restore or Cancel.

Clear All Private Data This allows selection to clear all private information from the vehicle. Select Delete or Cancel.

Restore Radio Settings This allows selection to restore radio settings. Select Restore or Cancel. Software Information Select to view the infotainment system current software information.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (49,1)

Universal Remote System See Radio Frequency Statement on page 13-15. The FCC Grant of Equipment Authorization Certificate number is CB2SAHL5B. The Canadian Registration ID number is 279B-SAHL5B.

Universal Remote System Programming

Instruments and Controls

5-49

If equipped, these buttons are in the driver sun visor. This system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. These instructions refer to a garage door opener, but can be used for other devices. Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process. Keep the original hand-held transmitter for use in other vehicles as well as for future programming. Erase the programming when vehicle ownership is terminated.

See “Erasing Universal Remote System Buttons” later in this section. To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door. Make sure the hand-held transmitter has a new battery for quick and accurate transmission of the radio-frequency signal. Programming the Universal Remote System For questions or help programming the Universal Remote system, call 1-800-355-3515 or see www.homelink.com. Programming involves time-sensitive actions, and may time out causing the procedure to be repeated.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (50,1)

5-50

Instruments and Controls

To program up to three devices: 1. Hold the end of the hand-held

transmitter about 3 to 8 cm (1 to 3 in) away from the Universal Remote system buttons with the indicator light in view. The hand-held transmitter was supplied by the manufacturer of the garage door opener receiver.

2. At the same time, press and

hold both the hand-held transmitter button and one of the three Universal Remote system buttons to be used to operate the garage door. Do not release either button until the indicator light changes from a slow to a rapid flash. Then release both buttons. Some garage door openers may require substitution of Step 2
with the procedure under in “Radio Signals for Canada and Some Gate Operators” later in this section.

3. Press and hold the newly

programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation.

If the indicator light stays on continuously or the garage door moves when the button is pressed, then programming is complete. There is no need to complete Steps 4–6. If the indicator light does not come on or the garage door does not move, a second button press may be required. For a second time, press and hold the newly programmed button for five seconds. If the light stays on or the garage door moves, programming is complete. If the indicator light blinks rapidly for two seconds, then changes to a solid light

and the garage door does not move, continue with programming Steps 4–6.

Learn or Smart Button 4. After completing Steps 1–3,

locate the Learn or Smart button inside the garage on the garage door opener receiver. The name and color of the button may vary by manufacturer.

5. Press and release the Learn or

6.

Smart button. Step 6 must be completed within 30 seconds of pressing this button. Inside the vehicle the vehicle, press and hold the newly programmed Universal Remote system button for two seconds

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (51,1)

Instruments and Controls

5-51

transmission. This may not be long enough for the Universal Remote system to pick up the signal during programming. If the programming did not work, replace Step 2 under “Programming the Universal Remote System” with the following: Press and hold the Universal Remote system button while pressing and releasing the hand-held transmitter button every two seconds until the signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then rapidly. Proceed with Step 3 under “Programming the Universal Remote System” to complete.

Universal Remote System Operation

Using the Universal Remote System Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted. Erasing Universal Remote System Buttons Erase all programmed buttons when vehicle ownership is terminated. To erase: 1. Press and hold the two outside buttons until the indicator light begins to flash. This should take about 10 seconds.

2. Release both buttons.

and then release it. If the garage door does not move or the lamp on the garage door opener receiver does not flash, press and hold the same button a second time for two seconds, then release it. Again, if the door does not move or the garage door lamp does not flash, press and hold the same button a third time for two seconds, then release it.

The Universal Remote system should now activate the garage door. Repeat the process to program the two remaining buttons. Radio Signals for Canada and Some Gate Operators For questions or programming help call 1-800-355-3515 or see www.homelink.com. Canadian radio-frequency laws and some U.S. gate operators require transmitter signals to time out or quit after several seconds of

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (52,1)

5-52

Instruments and Controls

Reprogramming a Single Universal Remote System Button To reprogram any of the system buttons: 1. Press and hold any one of the

buttons. Do not release the button.

2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.”

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (1,1)

Lighting

Exterior Lighting

Exterior Lamp Controls . . . . . . . . 6-1
Exterior Lamps Off

Reminder . . . . . . . . . . . . . . . . . . . . 6-2

Headlamp High/Low-Beam

Changer . . . . . . . . . . . . . . . . . . . . . 6-2
Flash-to-Pass . . . . . . . . . . . . . . . . . 6-2
Daytime Running

Lamps (DRL) . . . . . . . . . . . . . . . . 6-2

Automatic Headlamp

System . . . . . . . . . . . . . . . . . . . . . . 6-3
Hazard Warning Flashers . . . . . 6-4
Turn and Lane-Change

Signals . . . . . . . . . . . . . . . . . . . . . . 6-5

Interior Lighting

Instrument Panel Illumination

Control . . . . . . . . . . . . . . . . . . . . . . 6-5
Courtesy Lamps . . . . . . . . . . . . . . 6-5
Reading Lamps . . . . . . . . . . . . . . . 6-6

Lighting

6-1

Exterior Lighting

Exterior Lamp Controls

Lighting Features

Entry Lighting . . . . . . . . . . . . . . . . . 6-6
Exit Lighting . . . . . . . . . . . . . . . . . . . 6-6
Battery Power Protection . . . . . . 6-7
Exterior Lighting Battery

Saver . . . . . . . . . . . . . . . . . . . . . . . . 6-7

The exterior lamp control is on the turn signal lever. There are four positions: O (Off/On): Briefly turn to this position to turn the automatic light control off or on again. When released, the control returns to the AUTO position.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (2,1)

6-2

Lighting

AUTO (Automatic): Sets the exterior lamps to automatic mode. AUTO mode turns the exterior lamps on and off depending on how much light is available outside the vehicle. To override AUTO mode, turn the control to O. To reset to AUTO mode, turn the control to O and then release back to AUTO. Automatic mode also resets when the vehicle is turned off and then back on again if the control is left in the AUTO position. ; (Parking Lamps): Turns on the parking lamps including all lamps, except the headlamps. The parking lamp indicator light comes on and stays on when the parking lamps are on with the engine off and the ignition to ACC/ ACCESSORY. 5 (Headlamps): Turns on the headlamps together with the parking lamps and instrument panel lights.

Exterior Lamps Off Reminder A warning chime will sound if the exterior lamp control is left on in either the headlamp or parking lamp position and the driver door is opened with the ignition off.

Headlamp High/ Low-Beam Changer Push the turn signal lever away from you and release to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release.

This indicator light turns on in the instrument cluster when the high-beam headlamps are on.

Flash-to-Pass To use the flash-to-pass feature, briefly pull the turn signal lever toward you. The high-beam indicator flashes to indicate to the other driver that you intend to pass.

Daytime Running Lamps (DRL) DRL can make it easier for others to see the front of your vehicle during the day. DRL are required on all vehicles first sold in Canada. The DRL system makes the dedicated lamps come on when the following conditions are met:

It is still daylight and the ignition is on. The exterior lamp control is in the AUTO position. The transmission is not in P (Park) or the parking brake is off.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (3,1)

When DRL are on, only the front lamps will be on. The parking lamps, taillamps, instrument panel lights, or other exterior lamps will not be on when the DRL are being used. When it is dark enough outside, the front lamps dim to parking lamps and the normal low-beam headlamps turn on. When it is bright enough outside, the regular lamps go off, and the front DRL will take over. If the vehicle is started in a dark garage, the automatic headlamp system comes on immediately. Once the vehicle leaves the garage, it takes approximately one minute for the automatic headlamp system to change to DRL if it is light outside. During that delay, the instrument cluster may not be as bright as usual. Make sure the instrument panel brightness knob is in the full bright position. See Instrument Panel Illumination Control on page 6-5.

If it is dark enough outside and the exterior lamp control is off, a Driver Information Center (DIC) message may display. See Lamp Messages on page 5-36. Turning the exterior lamp control to off a second time, or turning on the headlamps will remove the DIC message. If the parking lamps were turned on instead, the DIC message will continue to be displayed. The regular headlamp system should be turned on when needed. To turn off the DRL, turn the exterior lamp control to the off position or shift into P (Park). The DRL will stay off until the control is toggled again or the vehicle is shifted out of P (Park). This procedure applies only to vehicles first sold in the United States.

Lighting

6-3

Automatic Headlamp System When the exterior lamp control is set to AUTO and it is dark enough outside, the headlamps and parking lamps come on automatically.

There is a light sensor on top of the instrument panel. Do not cover the sensor, otherwise the headlamps will come on when they are not needed. The system may also turn on the headlamps and parking lamps when driving through a parking garage or tunnel.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (4,1)

6-4

Lighting

When it is bright enough outside, the headlamps and parking lamps will turn off or may change to Daytime Running Lamps (DRL). The automatic headlamp system turns off when the exterior lamp control is turned to O or the ignition is off. To turn automatic headlamp system back on, turn the band to O again, then release it. If the automatic headlamp system has the headlamps turned on and you turn the ignition off, the headlamps will turn off. When the driver door is opened the headlamps and parking lamps will illuminate for a period of time.

The length of the delayed illumination period can be changed. See “Exit Lighting” under Vehicle Personalization on page 5-43. The regular headlamp system should be turned on when needed. Lights On with Wipers If the windshield wipers are activated in daylight with the engine on and the exterior lamp control is in AUTO, the headlamps, parking lamps, and other exterior lamps will come on. The time it takes for the lamps to turn on depends on the wiper speed. When the wipers are turned off, the lamps turn off. To disable, move the exterior lamp control to O or ;.

Hazard Warning Flashers

The hazard warning flashers warn others that you have a problem. The button is near the center of the instrument panel. | (Hazard Warning Flashers): Press to make the front and rear turn signal lamps flash on and off. Press again to turn the flashers off. The hazard warning flashers work no matter what mode the ignition is in, even if the ignition is turned off.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (5,1)

When the hazard warning flashers are on, the turn signals will not work.

Turn and Lane-Change Signals

An arrow on the instrument cluster flashes in the direction of the turn or lane change. Move the lever all the way up or down to signal a turn. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. If the lever is briefly pressed and released, the

turn signal flashes three times. If more flashes are desired, continue to hold the lever. The lever returns to its starting position when it is released. If after signaling a turn or lane change the arrows flash rapidly or do not come on, a turn signal indicator light failure may have occurred. If a turn signal has failed, the lamp may need to be replaced. See your dealer.

Turn Signal on Chime A chime sounds if the turn signal has been on for more than 1.2 km (0.75 mi) of driving. If you need to leave the turn signal on for more than 1.2 km (0.75 mi), turn off the signal and then turn it back on.

Lighting

6-5

Interior Lighting

Instrument Panel Illumination Control

The knob for this feature is on the left side of the instrument panel. Turn the knob clockwise or counterclockwise to brighten or dim the instrument panel lights at night. Turn the knob completely clockwise to turn on the interior lights.

Courtesy Lamps When any door or the hatch/trunk is opened, the interior lamps will come on, unless it is bright outside.

Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 6007198) - 2014 - CRC - 2/5/14

Black plate (6,1)

6-6

Lighting

The rear compartment lights only come on when the rear compartment is opened. To turn the courtesy lamps on or off, turn the instrument panel brightness knob completely clockwise or counterclockwise.

Reading Lamps

The reading lamps are in the overhead console. The lamps go on when a door is opened. When the doors are closed, press the lamp buttons to turn on each lamp.

Exit Lighting The headlamps, taillamps, parking lamps, outside mirror lamps, and license plate lamps come on at night, or in areas with limited lighting, when the driver’s door is opened after the ignition is turned off. The dome lamp comes on after