2015 Chevrolet Camaro Owners Manual

INFO

Press: Turns the system on or off. Turn: Adjusts the volume.

Radio: Shows available information about the current station. CD/MP3: Shows available information about the current track.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (3,1)

3. Buttons 1−6

8. CD/AUX

13. CONFIG

Infotainment System 7-3

Radio: Saves and selects favorite stations.

4. FAV

Radio: Opens the favorites list.

5. MENU/SELECT

Press: Opens the menus and selects menu items. Turn: Highlights menu items or sets values while in a menu. Manually selects radio stations while listening to the radio.

6. RADIO/BAND

Changes the band while listening to the radio. Selects the radio when listening to a different audio source. 7. X (CD Eject)

Removes the CD from the slot.

Selects between the CD player or a connected external audio source.

9. PHONE

Opens the phone main menu. Mutes the audio system.

10. SEEK 7

Radio: Seeks the previous station. CD: Selects the previous track or rewinds within a track.

11. CD Slot

Insert a CD.

12. SEEK 6

Radio: Seeks the next station. CD: Selects the next track or fast forwards within a track.

Opens the Configuration Settings menu.

14. TONE

Opens the Tone Settings menu.

15. BACK /

Menu: Moves one level back. Character Input: Deletes the last character.

Operation

Controls The infotainment system is operated by using the pushbuttons, multifunction knobs, and menus that are shown on the display, and steering wheel controls, if equipped. Turning the System On or Off VOL/ O (Volume/Power): Press to turn the system on and off.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (4,1)

7-4

Infotainment System

Automatic Off If the infotainment system has been turned on after the ignition is turned off, the system turns off automatically after 10 minutes. Volume Control VOL/ O (Volume/Power): Turn to adjust the volume. PHONE: For vehicles with OnStar®, press and hold PHONE to mute the infotainment system. Press and hold PHONE again, or turn VOL/O to cancel mute. For vehicles without OnStar, press PHONE to mute the infotainment system. Press PHONE again, or turn VOL/O to cancel mute. Menu System

Controls The MENU/SELECT knob and the BACK / button are used to navigate the menu system.

MENU/SELECT: Press to: . Enter the menu system. . Select or activate the highlighted

menu option.

. Confirm a set value. . Switch a system setting on

or off.

Turn to: . Highlight a menu option. . Select a value. BACK / : Press to: . Exit a menu. . Return from a submenu screen

to the previous menu screen. . Delete the last character in a

sequence.

Selecting a Menu Option

1. Turn the MENU/SELECT knob to

move the highlighted bar.

2. Press the MENU/SELECT knob to select the highlighted option.

Submenus

An arrow on the right-hand edge of the menu indicates that it has a submenu with other options.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (5,1)

Activating a Setting

Turning a Function On or Off

1. Turn the MENU/SELECT knob to

1. Turn the MENU/SELECT knob to

highlight the setting.

highlight the function.

2. Press the MENU/SELECT knob

2. Press the MENU/SELECT knob

to activate the setting.

to turn the function on or off.

Setting a Value

Entering a Character Sequence

1. Turn the MENU/SELECT knob to

1. Turn the MENU/SELECT knob to

change the current value of the setting.

highlight the character.

2. Press the MENU/SELECT knob

2. Press the MENU/SELECT knob

to select the character.

to confirm the setting.

Infotainment System 7-5

Press the BACK / button to delete the last character or press and hold BACK / to delete the entire character sequence. Audio Settings The audio settings can be set for each radio band and each audio player source. To adjust the audio setting, press the TONE button and select the audio setting. Press the / BACK button to go back to the Tone Settings menu. To quickly reset an audio setting value to 0: 1. Highlight the option. 2. Press and hold the MENU/

SELECT knob until the value changes to 0.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (6,1)

7-6

Infotainment System

Adjusting the Treble, Midrange, and Bass

Adjusting the EQ (Equalizer) For vehicles that have an equalizer:

3. Select Radio Favorites. 4. Select the number of available

1. Select Treble, Midrange,

or Bass.

2. Select the value.

Adjusting the Fader and Balance

1. Select EQ. 2. Select the setting. System Settings

Configuring the Number of Favorite Pages

favorite pages.

5. Press the BACK / button to go

back to the System Configuration menu.

Auto Volume The auto volume feature automatically adjusts the radio volume to compensate for road and wind noise as the vehicle speeds up or slows down, so that the volume level is consistent. The level of volume compensation can be selected or the auto volume feature can be turned off.

1. Select Fader or Balance. 2. Select the value.

To configure the number of available favorite pages: 1. Press the CONFIG button. 2. Select Radio Settings.

1. Press the CONFIG button. 2. Select Radio Settings.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (7,1)

3. Select Auto Volume. 4. Select the setting. 5. Press the BACK / button to go

back to the System Configuration menu.

Maximum Startup Volume The maximum volume played when the radio is first turned on can be set.

1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Maximum Startup

Volume.

4. Select the setting. 5. Press the BACK / button to go

back to the System Configuration menu.

Radio

AM-FM Radio

Control Buttons The buttons used to control the radio are: RADIO/BAND: Press to turn the radio on and choose between AM, FM, and SiriusXM®, if equipped. SEEK 7 or SEEK 6 : Press to search for stations. FAV: Press to open the favorites list. 1−6: Press to select preset stations. MENU/SELECT: Turn to manually search for stations. RDS (Radio Data System) The radio may have RDS. The RDS feature is available for use only on FM stations that broadcast RDS information. This feature only works when the information from the radio

Infotainment System 7-7

station is available. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. If this happens, contact the radio station. While the radio is tuned to an FM-RDS station, the station name or call letters display. Radio Menus Radio menus are available for AM, FM, and SiriusXM, if equipped. Press the MENU/SELECT knob to open the main radio menu for that frequency. Selecting a Band Press the RADIO/BAND button to choose AM, FM, or SiriusXM, if equipped. The last station that was playing starts playing again.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (8,1)

7-8

Infotainment System

Selecting a Station

Seek Tuning Briefly press SEEK 7 or SEEK 6
to automatically search for the next available station. If a station is not found, the radio switches to a more sensitive search level. If a station still is not found, the frequency that was last active begins to play. Press and hold SEEK 7 or SEEK 6 until the station on the display is reached, then release the button.

Manual Tuning Turn the MENU/SELECT knob to select the frequency on the display.

Favorites List 1. Press the MENU/SELECT knob. 2. Select Favorites List. 3. Select the station.

Station Lists 1. Press the MENU/SELECT knob.

2. Select AM or FM Station List. All receivable stations in the current reception area are displayed. If no station list has been created, an automatic station search is done.

3. Select the station.

Updating Station and Category Lists If stations stored in the station list can no longer be received: 1. Press the MENU/SELECT knob. 2. Select Update AM or FM Station List, if the stations stored in the station list are no longer received. A station search will be completed and the first station in the updated list will play.

To cancel the station search, press the MENU/SELECT knob.

Category Lists Most stations that broadcast an RDS program type (PTY) code specify the type of programming transmitted. Some stations change

the PTY code depending on the content. The system stores the RDS stations, sorted by program type, in the FM category list. To search for a programming type determined by station: 1. Select FM category list. A list of all programming types available displays.

2. Select the programming type. A list of stations that transmit programming of the selected type displays.

3. Select the station. The category lists are updated when the corresponding station lists are updated. Storing and Retrieving Favorites Stations from all bands can be stored in the favorite lists in any order.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (9,1)

Up to six stations can be stored in each favorite page and the number of available favorite pages can be set.

Storing a Station as a Favorite To store the station to a position in the list, press the corresponding numeric button 1−6 until the station can be heard again.

Retrieving Stations Press the FAV button to open a favorite page or to switch to another favorite page. Briefly press one of the 1−6 buttons to retrieve the station.

Satellite Radio Vehicles with an XM Satellite Radio tuner and a valid SiriusXM® Satellite Radio subscription can receive SiriusXM programming.

SiriusXM Satellite Radio Service SiriusXM is a satellite radio service based in the 48 contiguous United States and 10 Canadian provinces. SiriusXM Satellite Radio has a wide variety of programming and commercial-free music, coast to coast, and in digital-quality sound. During your trial or when you subscribe, you will get unlimited access to SiriusXM Radio Online for when you are not in the vehicle. A service fee is required to receive the SiriusXM service. If SiriusXM service needs to be reactivated, the radio will display "No Subscription Please Renew" on channel XM1. For more information, contact SiriusXM at www.siriusxm.com or 1-866-635-2349 (U.S.), and www.xmradio.ca or 1-877-209-0079
(Canada).

Infotainment System 7-9

Control Buttons The buttons used to control the SiriusXM radio are: RADIO/BAND: Press to turn the radio on and choose between AM, FM, and SiriusXM. SEEK 7 or SEEK 6 : Press to search for stations. FAV: Press to open the favorites list. 1−6: Press to select preset stations. MENU/SELECT: Turn to search for stations. Selecting the SiriusXM Band Press the RADIO/BAND button to choose between the AM, FM, and SiriusXM bands. The last station played in that band begins to play when that band is selected. SiriusXM Categories SiriusXM stations are organized in categories.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (10,1)

7-10

Infotainment System

Removing or Adding Categories 1. Press the CONFIG button. 2. Select XM Categories. 3. Turn the MENU/SELECT knob to

highlight the category.

4. Press the MENU/SELECT knob to remove or add the category. Selecting a SiriusXM Station SiriusXM stations can be selected by using SEEK 7 or SEEK 6, the MENU/SELECT knob, or the menu system. To select a SiriusXM station using SEEK 7 or SEEK 6, do one of the following: . Press and release SEEK 7 or

SEEK 6 to go to the previous or next station.

. Press and hold SEEK 7 or

SEEK 6 to scroll through the previous or next stations until the station is reached.

To select a SiriusXM station using the MENU/SELECT knob: 1. Turn the MENU/SELECT knob to

highlight a SiriusXM station.

2. Press the MENU/SELECT knob to select the station, or leave the station highlighted.

To select a station using the menu: 1. Press the MENU/SELECT knob. 2. Select XM Stations List. 3. Select the station.

Selecting a Station by Category 1. Press the MENU/SELECT knob. 2. Select XM Category List. A list of

all programming types available displays.

3. Select the programming type. 4. Select the station. Storing and Retrieving Favorites Stations from all bands can be stored in any order in the favorite pages.

Up to six stations can be stored in each favorite page and the number of available favorite pages can be set.

Storing a Station as a Favorite To store the station to a position in the list, press and hold the corresponding 1−6 button until the station can be heard again.

Retrieving Stations Press the FAV button to open a favorite page or to switch to another favorite page. Briefly press one of the 1−6 buttons to retrieve the station.

Radio Reception Frequency interference and static can occur during normal radio reception if items such as phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (11,1)

Infotainment System 7-11

damaged, it could interfere with radio reception. For proper radio reception, the antenna connector needs to be properly attached to the post on the glass. If attaching a cell phone antenna to the glass, attach it between the grid lines.

{ Caution

Using a razor blade or sharp object to clear the inside rear window can damage the rear window antenna and/or the rear window defogger. Repairs would not be covered by the vehicle warranty. Do not clear the inside rear window with sharp objects.

interference or static, unplug the item from the accessory power outlet. FM FM signals only reach about 16 to 65 km (10 to 40 mi). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills, causing the sound to fade in and out. AM The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. Static can also occur when things like storms and power lines interfere with radio reception. When this happens, try reducing the treble on the radio.

SiriusXM Satellite Radio Service If equipped, SiriusXM Satellite Radio Service provides digital radio reception. Tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out. In addition, traveling or standing under heavy foliage, bridges, garages, or tunnels may cause loss of the SiriusXM signal for a period of time. Cell Phone Usage Cell phone usage, such as making or receiving phone calls, charging, or just having the phone on may cause static interference in the radio. Unplug the phone or turn it off if this happens.

Backglass Antenna The AM-FM antenna is integrated with the rear window defogger in the rear window. Do not scratch the inside surface or damage the lines in the glass. If the inside surface is

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (12,1)

7-12

Infotainment System

{ Caution

Do not apply aftermarket glass tinting with metallic film. The metallic film in some tinting materials will interfere with or distort the incoming radio reception. Any damage caused to the backglass antenna due to metallic tinting materials will not be covered by the vehicle warranty.

Multi-Band Antenna The multi-band antenna is on the roof of the vehicle. The antenna is used for OnStar, the SiriusXM Satellite Radio Service System, and GPS (Global Positioning System), if the vehicle has these features. Keep the antenna clear of obstructions for clear reception. If the vehicle has a sunroof, and it is open, reception can also be affected.

Diversity Antenna System For vehicles with convertible tops, the AM-FM antenna is a hidden self-tuning system, and is in the rear spoiler. It optimizes the AM and FM signals relative to the vehicle's position and radio station source. No maintenance or adjustments are needed. Do not place loads on the spoiler. If the spoiler is replaced, be sure it is replaced with the correct GM parts for the best AM and FM reception.

Audio Players

CD Player The CD player can play audio CDs and MP3 CDs. The CD player will not play 8 cm (3 in) CDs.

Care of CDs Sound quality can be reduced due to disc quality, recording method, quality of the music recorded, and how the disc has been handled. Handle discs carefully and store them in their original cases or other protective cases away from direct sunlight and dust. If the bottom surface of a disc is damaged, the disc may not play properly or at all. Do not touch the bottom surface of a disc while handling it; this could damage the surface. Pick up discs by grasping the outer edges or the edge of the hole and the outer edge. If the bottom surface of a disc is dirty, take a soft lint-free cloth, or dampen a clean soft cloth in a

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (13,1)

mild neutral detergent solution mixed with water, and clean it. Wipe the disc from the center to the outer edge.

Care of the CD Player Do not add a label to a disc, as it could get caught in the CD player. If a label is needed, label the top of the recorded disc with a marking pen. Do not use disc lens cleaners because they could contaminate the lens of the disc optics and damage the CD player.

{ Caution

If a label is added to a CD, more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged. While using the CD player, use only CDs in good condition without any label,

(Continued)

Caution (Continued)

load one CD at a time, and keep the CD player and the loading slot free of foreign materials, liquids, and debris.

Control Buttons The buttons used to control the CD player are: CD/AUX: Press to choose between the CD and AUX player. SEEK 7 or SEEK 6 : Press to select tracks or to fast forward or rewind within a track. MENU/SELECT: Turn to select tracks. INFO: Press to display additional information about the CD that may be available. X (Eject): Press to remove the CD.

Infotainment System 7-13

Inserting a CD With the printed side facing up, insert a disc into the CD slot until it is drawn in. Removing a CD Press X. The disc is pushed out of the CD slot. If the disc is not removed after it is ejected, it is pulled back in after a few seconds. Playing a CD or MP3 CD Press the CD/AUX button if there is a disc in the player; it begins playing. Information about the disc and current track is shown on the display depending on the data stored.

Selecting a CD Track Using the control buttons: Press SEEK 7 or SEEK 6 to select the previous or next track.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (14,1)

7-14

Infotainment System

Turn the MENU/SELECT knob counterclockwise or clockwise to select the previous or next track. Using the CD Menu: 1. Press the MENU/SELECT knob. 2. Select Tracks list. 3. Select the track.

Playing Tracks in Random Order Press the MENU/SELECT knob and then set Shuffle Songs to On.

Fast Forward and Rewind Press and hold SEEK 7 or SEEK 6 to fast forward or rewind within the current track.

Selecting an MP3 Track Using the control buttons: Press SEEK 7 or SEEK 6 to select the previous or next track. Turn the MENU/SELECT knob counterclockwise or clockwise to select the previous or next track.

Using the CD Menu: 1. Press the MENU/SELECT knob. 2. Select Playlists/Folders. 3. Select the playlist or folder. 4. Select the track.

Searching for MP3 Tracks It is normal for the search feature to take some time to display the information after reading the disc due to the amount of information stored on the disc. The infotainment system automatically switches to FM while the disc is being read. Tracks can be searched by: . Playlists . Artists . Albums . Song Titles . Genres

Folder View

To search for tracks: 1. Press the MENU/SELECT knob.

2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Genres, or Folder View. 4. Select the track.

Auxiliary Devices If equipped, the AUX input allows portable devices to connect to the vehicle using the 3.5 mm (1/8 in) input jack, the USB port, if equipped, or Bluetooth® wireless technology, if equipped. Portable devices are controlled by using the menu system described in Operation on page 7-3.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (15,1)

Infotainment System 7-15

Searching for a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres . Audiobooks . Composers To search for tracks: 1. Press the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Podcasts, Genres, Audiobooks, or Composers.

4. Select the track.

Adjusting the Volume Turn the VOL/ O knob to adjust the volume of the infotainment system after the volume level has been set on the portable audio device. USB Port For vehicles with a USB port, the following devices may be connected and controlled by the infotainment system.

iPods

. PlaysForSure Devices (PFD) . USB Drives

Zunes

Connecting and Controlling an iPod® Not all iPods can be controlled by the infotainment system.

Connecting an iPod Connect the iPod to the USB port using the cable that came with the device.

The AUX input is in the center console. 3.5 mm Jack Connect a 3.5 mm (1/8 in) cable to the auxiliary input jack to use a portable audio player. Playback of an audio device that is connected to the 3.5 mm jack can only be controlled using the controls on the device.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (16,1)

7-16

Infotainment System

Shuffle Press the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off, then press the BACK / button to return to the main screen. On: Plays tracks in the current folder in random order. Off: Plays tracks in the current folder in sequential order.

Repeat Press the MENU/SELECT knob and set Repeat to On or Off, then press the BACK / button to return to the main screen. On: Repeats the current track. Off: Starts playback from the beginning of the current track after the last track finishes.

Connecting and Controlling a PlaysForSure Device (PFD) or Zune®

Connecting a PFD or Zune Connect the PFD or Zune to the USB port using the cable that came with the device.

Searching for a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres To search for tracks: 1. Press the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Podcasts, or Genres.

4. Select the track.

Shuffle Functionality Press the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order. Off: Plays current tracks in sequential order.

Repeat Functionality Press the MENU/SELECT knob and set Repeat to On or Off. Repeat On: Repeats the current track. Repeat Off: Starts playback from the beginning of the current track after the last track finishes. Connecting and Controlling a USB Drive The infotainment system can only play back .mp3 and .wma files from a USB drive. Only the first 10,000 songs are recognized on the device.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (17,1)

When a device is not supported, the message “No supported data found. You can safely disconnect the device” appears.

Connecting a USB Drive Connect the USB drive to the USB port using the cable that came with the device.

Searching for a Track It is normal for the search feature to take some time to display the information after reading the disc due to the amount of information stored on the disc. Files that do not have any meta data stored in the ID3 tag display as Unknown. Tracks can be searched for by: . Playlists* . Artists . Albums . Song Titles . Genres

Folder View

*This only displays if a playlist is found on the device. To search for tracks: 1. Press the MENU/SELECT knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Genres, or Folder View. 4. Select the track.

Shuffle Functionality Press the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order. Off: Plays current tracks in sequential order.

Repeat Functionality Press the MENU/SELECT knob and set Repeat to On or Off. Repeat On: Repeats the current track.

Infotainment System 7-17

Repeat Off: Starts playback from the beginning of the current track after the last track finishes. Connecting a Bluetooth® Device Before a Bluetooth device can be connected to the infotainment system, it must first be paired to the system. Not all Bluetooth devices can be paired to the infotainment system. Before pairing the Bluetooth device, become familiar with its user guide for Bluetooth functions. The system only connects to Bluetooth devices that support A2DP (Advanced Audio Distribution Profile) version 1.2. Pairing Information: . Up to five devices can be paired

to the system. The pairing process is disabled when the vehicle is moving. The infotainment system automatically links with the first available paired device in the order the device was paired.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (18,1)

7-18

Infotainment System

. Only one paired device can be connected to the infotainment system at a time.

. Pairing should only need to be

completed once, unless changes to the pairing information have been made or the device is deleted.

Bluetooth Setup Menu The Bluetooth Setup menu can be accessed with or without a device attached to the USB port. To select the Bluetooth Setup menu when a device is attached to the USB port and active: 1. Press the MENU/SELECT knob

while in the iPod, Zune, PFD, or USB device main menu.

2. Select Bluetooth Music Setup.

To select the Bluetooth Music Setup menu when a device is not attached to the USB port, or when a device is attached to the USB port but not active: 1. Press the CD/AUX button until

AUX is the active source.

2. Press the MENU/SELECT knob. 3. Select Bluetooth Music Setup. To select the Bluetooth Music Setup menu when a Bluetooth device is connected and active: 1. Press the MENU/SELECT knob. 2. Select Bluetooth Music Setup.

Pairing a Device 1. Select Connect To New Device

from the Bluetooth Music Setup menu.

2. The system asks a series of

Yes/No questions to determine what type of device is being paired.

3. After the system determines

what type of Bluetooth device is being paired, the Bluetooth device will need to be put into discovery mode.

4. Some devices may require a

personal identification number (PIN) in order to complete the pairing process. Locate the device named “GMusicConnect” in the list on the Bluetooth device and follow the instructions on the device to enter the four-digit PIN provided by the infotainment system.

Connecting to a Device Once a device is paired to the infotainment system, it can be connected to the infotainment system. To connect a paired device when no other device is connected to the infotainment system: 1. Select the Select Device option

from the Bluetooth Music Setup menu.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (19,1)

2. Select the new device. To connect a paired device when another device is connected to the infotainment system: 1. Select the Select Device option

from the Bluetooth Music Setup menu.

2. Select the new device. 3. The active device is

disconnected from the system and the new device is connected.

Removing a Device 1. Select Remove Device from the

Bluetooth Music Setup menu.

2. Select the device. 3. The device is removed from the

system.

Before connecting to the removed device again, it will need to paired to the infotainment system.

Changing the PIN To change the default PIN: 1. Select Change Default PIN from

the Bluetooth Music Setup menu.

2. Select a pre-defined PIN,

or select Other to create a PIN.

To create a PIN: 1. Select the length of the PIN. 2. Enter the character sequence.

Messages The following messages may appear on the infotainment screen. Poor Bluetooth Signal Quality: This message displays when the Bluetooth signal strength is low. This Feature is Unavailable While Vehicle is Moving: This message displays when an action is not allowed while the vehicle is moving.

Infotainment System 7-19

Controlling a Bluetooth® Device Bluetooth devices that support AVRCP (Audio/Video Remote Control Profile) version 1.4 may be able to be controlled by the infotainment system. Press and release SEEK 7 or SEEK 6 to skip tracks. Press and hold SEEK 7 or SEEK 6 to fast forward or fast reverse within a track. Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement on page 13-12 for Federal Communications Commission and Industry Canada information.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (20,1)

7-20

Infotainment System

Phone

Bluetooth (Overview) For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: . Placement and receipt of calls in

a hands-free mode.

. Sharing of the cell phone’s

address book or contact list with the vehicle.

To minimize driver distraction, before driving, and with the vehicle parked: . Become familiar with the

features of the cell phone. Organize the phone book and contact lists clearly and delete duplicate or rarely used entries. If possible, program speed dial or other shortcuts.

. Review the controls and

operation of the infotainment system.

. Pair cell phone(s) to the vehicle.

The system may not work with all cell phones. See “Pairing” in this section. If the cell phone has voice dialing capability, learn to use that feature to access the address book or contact list. See “Voice Pass-Thru” in this section.

. See “Storing and Deleting Phone

Numbers” in this section.

{ Warning

When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment system. Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.

Vehicles with a Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to

make and receive phone calls. The infotainment system and voice recognition are used to control the system. The system can be used while in ON/RUN or ACC/ ACCESSORY. The range of the Bluetooth system can be up to 9.1 m (30 ft). Not all phones support all functions and not all phones work with the Bluetooth system. See www.gm.com/bluetooth for more information about compatible phones. Bluetooth Controls Use the buttons on the infotainment system and the steering wheel to operate the Bluetooth system.

Steering Wheel Controls b / g (Push to Talk): Press to answer incoming calls, confirm system information, and start voice recognition. $ / i (Mute/End Call): Press to end a call, reject a call, or cancel an operation.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (21,1)

Infotainment System Controls If equipped, the infotainment system allows certain controls to be selected on the infotainment display. For information about how to navigate the menu system using the infotainment controls, see Operation on page 7-3. PHONE: Press to enter the Phone main menu. Voice Recognition The voice recognition system uses commands to control the system and dial phone numbers. Noise: The system may not recognize voice commands if there is too much background noise. When to Speak: A tone sounds to indicate that the system is ready for a voice command. Wait for the tone and then speak. How to Speak: Speak clearly in a calm and natural voice.

Audio System When using the Bluetooth system, sound comes through the vehicle's front audio system speakers and overrides the audio system. Use the VOL/ O knob during a call to change the volume level. The adjusted volume level remains in memory for later calls. The system maintains a minimum volume level. Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement on page 13-12.

Infotainment System 7-21

Bluetooth (Infotainment Controls) For information about how to navigate the menu system using the infotainment controls, see Operation on page 7-3. Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands-Free Calling, if available. See OnStar Overview on page 14-1.

Pairing Information . A Bluetooth phone with MP3
capability cannot be paired to the vehicle as a phone and an MP3 player at the same time. . Up to five cell phones can be

paired to the Bluetooth system.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (22,1)

7-22

Infotainment System

The pairing process is disabled when the vehicle is moving.

. Pairing only needs to be

completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To link to a different paired phone, see “Linking to a Different Phone” later in this section.

Pairing a Phone 1. Press the CONFIG button. 2. Select Phone Settings or

Bluetooth Settings.

3. Select Bluetooth.

4. Select Pair Device (Phone).

A four-digit Personal Identification Number (PIN) appears on the display. The PIN is used in Step 6.

5. Start the pairing process on the

cell phone to be paired to the vehicle. See the cell phone manufacturer's user guide for information on this process.

6. Locate the device named “Your

Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 4. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. The system responds with “ has been successfully paired” after the pairing process is complete.

7. Repeat Steps 1−6 to pair

additional phones.

Listing All Paired and Connected Phones 1. Press the CONFIG button. 2. Select Phone Settings or

Bluetooth Settings.

3. Select Bluetooth. 4. Select Device List.

Deleting a Paired Phone 1. Press the CONFIG button. 2. Select Phone Settings or

Bluetooth Settings.

3. Select Bluetooth. 4. Select Device List. 5. Select the phone to delete and follow the on screen prompts.

Linking to a Different Phone To link to a different phone, the new phone must be in the vehicle and available to be connected to the Bluetooth system before the process is started. 1. Press the CONFIG button.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (23,1)

Infotainment System 7-23

The Phone Book menu allows you to access the phone book stored in the cell phone to make a call. The Call Lists menu allows you to access the phone numbers from the Incoming Calls, Outgoing Calls, and Missed Calls menus on your cell phone to make a call. To make a call using the Phone Book menu: 1. Press the PHONE button once

or twice.

2. Select Phone Book. 3. Search through the list by

selecting the letter group the phone book entry begins with, or press the MENU/SELECT knob to scroll through the entire list of names/numbers in the phone book.

4. Select the name or number you

want to call.

To make a call using the Call Lists menu: 1. Press the PHONE button once

or twice.

2. Select Call Lists. 3. Select the Incoming Calls, Outgoing Calls, or Missed Calls list.

4. Select the name or number you

want to call. Making a Call To make a call: 1. Press the PHONE button once

or twice.

2. Enter the character sequence.

See “Entering a Character Sequence” in Operation on page 7-3.

3. Select Call to start dialing the

number.

2. Select Phone Settings or

Bluetooth Settings.

3. Select Bluetooth. 4. Select Device List. 5. Select the new phone to link to

and follow the on screen prompts. If delete is selected, the highlighted phone will be deleted.

Making a Call Using Phone Book For cell phones that support the phone book feature, the Bluetooth system can use the contacts stored on your cell phone to make calls. See your cell phone manufacturer‘s user guide or contact your wireless provider to find out if this feature is supported by your phone. When a cell phone supports the phone book feature, the Phone Book and Call Lists menus are automatically available.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (24,1)

7-24

Infotainment System

Accepting or Declining a Call When an incoming call is received, the infotainment system mutes and a ring tone is heard in the vehicle.

Accepting a Call Turn the MENU/SELECT knob to “Answer” and press the MENU/ SELECT knob to accept the call.

Declining a Call Turn the MENU/SELECT knob to “Decline” and press the MENU/ SELECT knob to decline the call. Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work.

Accepting a Call Turn the MENU/SELECT knob to “Answer” and press the MENU/ SELECT knob to accept the call.

Declining a Call Turn the MENU/SELECT knob to “Decline” and press the MENU/ SELECT knob to decline the call.

Switching Between Calls (Call Waiting Calls Only) To switch between calls: 1. Turn or press the MENU/

SELECT knob.

2. Select Switch Call from

the menu.

Conference Calling Conference calling and three-way calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. To start a conference while in a current call: 1. Turn or press the MENU/

SELECT knob.

2. Select Enter Number.

3. Enter the character sequence

then select Call. See “Entering a Character Sequence” in Operation on page 7-3.

4. After the call has been placed,

turn or press the MENU/ SELECT knob and choose Merge Calls.

5. To add more callers to the

conference call, repeat Steps 1
−4. The number of callers that can be added is limited by your wireless service carrier.

Ending a Call Turn or press the MENU/SELECT knob and select Hang Up. Muting a Call

To Mute a Call Turn or press the MENU/SELECT knob and select Mute Call.

To Cancel Mute Turn or press the MENU/SELECT knob and select Mute Call.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (25,1)

Dual Tone Multi-Frequency (DTMF) Tones The in-vehicle Bluetooth system can send numbers during a call. This is used when calling a menu-driven phone system. 1. Turn or press the MENU/

SELECT knob and select Enter Number.

2. Enter the character sequence.

See “Entering a Character Sequence” in Operation on page 7-3.

Bluetooth (Voice Recognition)

Using Voice Recognition To use voice recognition, press the b / g button on the steering wheel. Use the commands below for the various voice features. For additional information, say “Help” while you are in a voice recognition menu.

Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands-Free Calling, if available. See OnStar Overview on page 14-1.

Pairing Information . A Bluetooth phone with MP3
capability cannot be paired to the vehicle as a phone and an MP3 player at the same time. . Up to five cell phones can be

paired to the Bluetooth system. The pairing process is disabled when the vehicle is moving.

. Pairing only needs to be

completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

Infotainment System 7-25

. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To link to a different paired phone, see “Linking to a Different Phone” later in this section.

Pairing a Phone 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” This command

can be skipped.

3. Say “Pair.” The system responds with instructions and a four-digit Personal Identification Number (PIN). The PIN is used in Step 5.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (26,1)

7-26

Infotainment System

4. Start the pairing process on the cell phone that you want to pair. For help with this process, see your cell phone manufacturer's user guide.

5. Locate the device named “Your

Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 3. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. The system responds with “ has been successfully paired” after the pairing process is complete.

6. Repeat Steps 1−5 to pair

additional phones.

Listing All Paired and Connected Phones The system can list all cell phones paired to it. If a paired cell phone is also connected to the vehicle, the system responds with “is connected” after that phone name. 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “List.”

Deleting a Paired Phone If the phone name you want to delete is unknown, see “Listing All Paired and Connected Phones.” 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “Delete.” The system asks

for which phone to delete.

4. Say the name of the phone you

want to delete.

Connecting to a Different Phone To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all the available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times. 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “Change phone.”

If another cell phone is found, the response will be “ is now connected.” If another cell phone is not found, the original phone remains connected.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (27,1)

Storing and Deleting Phone Numbers The system can store up to 30
phone numbers as name tags in the Hands-Free Directory that is shared between the Bluetooth and OnStar systems. The following commands are used to delete and store phone numbers. Store: This command will store a phone number, or a group of numbers as a name tag. Digit Store: This command allows a phone number to be stored as a name tag by entering the digits one at a time. Delete: This command is used to delete individual name tags. Delete All Name Tags: This command deletes all stored name tags in the Hands-Free Calling Directory and the Destinations Directory.

Using the “Store” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Store.” 3. Say the phone number or group of numbers you want to store all at once with no pauses, then follow the directions given by the system to save a name tag for this number.

Using the “Digit Store” Command If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Digit Store.”

Infotainment System 7-27

3. Say each digit, one at a time,

that you want to store. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Store,” and then follow the directions given by the system to save a name tag for this number.

Using the “Delete” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Delete.” 3. Say the name tag you want to

delete.

Using the “Delete All Name Tags” Command This command deletes all stored name tags in the Hands-Free Calling Directory and the Destinations Directory.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (28,1)

7-28

Infotainment System

To delete all name tags: 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Delete all name tags.” Listing Stored Numbers The list command will list all the stored numbers and name tags.

Using the “List” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List.” Making a Call Calls can be made using the following commands. Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag.

Digit Dial: This command allows a phone number to be dialed by entering the digits one at a time. Redial: This command is used to dial the last number used on the cell phone.

Using the “Dial” or “Call” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Dial” or “Call.” 3. Say the entire number without pausing or say the name tag.

Once connected, the person called will be heard through the audio speakers.

Calling 911 Emergency 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Dial” or “Call.” 3. Say “911.”

4. Say "Dial." System responds:

"OK, dialing 911."

Using the “Digit Dial” Command The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Digit Dial.” 3. Say each digit, one at a time,

that you want to dial. After each digit is entered, the system repeats back the digit it heard

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (29,1)

followed by a tone. After the last digit has been entered, say “Dial.”

Once connected, the person called will be heard through the audio speakers.

Using the “Re-dial” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. After the tone, say “Redial.” The

system dials the last number called from the connected cell phone.

Once connected, the person called will be heard through the audio speakers. Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. . Press b / g to answer the call. . Press $ / i to ignore a call.

Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . Press b / g to answer an

incoming call when another call is active. The original call is placed on hold.

. Press b / g again to return to

the original call. To ignore the incoming call, no action is required.

. Press $ / i to disconnect the current call and switch to the call on hold.

Three-Way Calling Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press b / g. 2. Say “Three-way call.”

Infotainment System 7-29

3. Use the dial or call command to dial the number of the third party to be called.

4. Once the call is connected, press b / g to link all callers together.

Ending a Call Press $ / i to end a call. Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. To mute a call, press b / g , and then say “Mute Call.” To cancel mute, press b / g , and then say “Un-mute Call.” Transferring a Call Audio can be transferred between the Bluetooth system and the cell phone.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (30,1)

7-30

Infotainment System

The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.

To Transfer Audio from the Bluetooth System to a Cell Phone During a call with the audio in the vehicle: 1. Press b / g. 2. Say “Transfer Call.”

To Transfer Audio to the Bluetooth System from a Cell Phone During a call with the audio on the cell phone, press b / g. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information.

Voice Pass-Thru Voice pass-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature. To access contacts stored in the cell phone: 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” This command

can be skipped.

3. Say “Voice.” The system responds “OK, accessing .”

The cell phone's normal prompt messages will go through their cycle according to the phone's operating instructions.

Dual Tone Multi-Frequency (DTMF) Tones The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system. Account numbers can also be stored for use.

Sending a Number or Name Tag During a Call 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Dial.” 3. Say the number or name tag

to send.

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14

Black plate (31,1)

Infotainment System 7-31

Clearing the System Unless information is deleted out of the in-vehicle Bluetooth system, it will be retained indefinitely. This includes all saved name tags in the phone book and phone pairing information. See the previous sections on “Deleting a Paired Phone” and “Deleting Name Tags.”

Chevrolet Camaro Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7695163) - 2015 - crc - 9/4/14