2013 Chevrolet Camaro Owners Manual

See If a Tire Goes Flat on page 10‑70 for other important safety warnings.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (78,1)

10-78

Vehicle Care

10.

Inflate the tire to the recommended inflation pressure using the pressure gauge (4). The recommended inflation pressure can be found on the Tire and Loading Information label. See Tire Pressure on page 10‑56. The pressure gauge (4) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate reading. The compressor may be turned on/ off until the correct pressure is reached. If the tire is inflated higher than the recommended pressure, press the pressure relief button (3), if equipped, until the proper pressure reading is reached. This option is only functional when using the air only hose (5).

11. Press the on/off button (1) to

turn the tire sealant and compressor kit off. Be careful while handling the tire sealant and compressor kit as it could be warm after usage.

12. Unplug the power plug (7) from

the accessory power outlet in the vehicle.

13. Disconnect the air only

hose (5) from the tire valve stem, by turning it counterclockwise, and replace the tire valve stem cap.

14. Return the air only hose (5)

and the power plug (7) back to their original locations.

15. Return the equipment to its

original storage location in the vehicle.

Removal and Installation of the Sealant Canister To remove the sealant canister:

1. Remove the plastic cover. 2. Unscrew the connector (2) from

the canister (1).

3. Pull up on the canister (1) to

remove it.

4. Replace with a new canister which is available from your dealer.

5. Push the new canister into

place.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (79,1)

6. Screw the connector (2) to the

3. Turn the center retainer

Vehicle Care

10-79

counterclockwise to remove the cover.

4. Remove the tire sealant and compressor kit from the foam container.

To store the tire sealant and compressor kit, reverse the steps.

Tire Changing

Removing the Spare Tire and Tools

Spare Tire 1. Open the trunk. See Trunk on

page 2‑8.

2. Remove the carpet.

canister (1).

7. Slide the plastic cover back on.

Storing the Tire Sealant and Compressor Kit

The tire sealant and compressor kit is in a foam container in the trunk. 1. Open the trunk. See Trunk on

page 2‑8.

2. Remove the carpet.

3. Turn the center retainer

counterclockwise to remove the spare tire cover.

4. Remove the spare tire and place it next to the tire being changed.

Tools The jack and tools are stored below the spare tire.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (80,1)

10-80

Vehicle Care

Coin/Pierce Jack with Two-Piece

Hex-Head Jack with Three-Piece

Wrench

1. Tool Container 2. Two-Piece Wrench 3. Strap 4. Jack Handle Extension 5. Coin/Pierce Jack

Wrench

1. Tool Container 2. Three-Piece Wrench 3. Strap 4. Hex Head Jack

1. Tool Container 2. Jack 3. End of the Jack 1. Turn the end of the jack (3)

counterclockwise to loosen it. Remove the jack (2) from the retaining bracket.

2. Remove the tool container (1). 3. Remove the tools and tire strap

from the tool container.

4. Place the tools next to the tire

being changed.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (81,1)

Removing the Flat Tire and Installing the Spare Tire 1. Do a safety check before

proceeding. See If a Tire Goes Flat on page 10‑70 for more information. If the vehicle has wheel bolt caps, remove the caps. Store the caps with the wheel cover.

2.

Notice: Make sure that the jack lift head is in the correct position or you may damage your vehicle. The repairs would not be covered by your warranty.

4. Position the jack lift head at the jack location nearest the flat tire. The location is indicated by a mark on the bottom edge of the vehicle. The jack must not be used in any other position. Raise the jack until it engages with the jacking point.

3. Use the fully extended wheel

wrench to loosen all the wheel nuts one-half turn counterclockwise. Do not remove them yet.

Vehicle Care

10-81

{ WARNING

Getting under a vehicle when it is lifted on a jack is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack.

{ WARNING

Raising the vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (82,1)

10-82

Vehicle Care

{ WARNING

Raising the vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle.

5.

If you have a coin/pierce jack, attach the jack handle extension to the jack by sliding the hook through the end of the jack and insert the other end of the jack handle into the wrench. If you have a hex head jack, place the hex tube end of the wrench over the hex head of the jack.

6. Raise the vehicle by turning the

wrench clockwise until the vehicle is far enough off the ground to allow enough room for the compact spare tire to fit under the vehicle. Keep the hook parallel to the ground. The wrench may need to be removed and repositioned to continue turning it.

Coin/Pierce Jack and Wrench

Hex Head Jack and Wrench

7. Remove all of the wheel nuts and place them in a dry, clean place to avoid getting dirt in the threads.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (83,1)

Vehicle Care

10-83

10. Reinstall the wheel nuts with the rounded end of the nuts toward the wheel. Tighten each nut as much as possible using the wheel wrench until the wheel is held firmly against the hub. Use your free hand to prevent the wheel from turning while you are tightening.

11. Lower the vehicle by turning

the wrench counterclockwise. Lower the jack completely.

{ WARNING

Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, a cloth or a paper towel can be used; however, use a scraper or wire brush later to remove all rust or dirt.

8. Remove any rust or dirt from the wheel bolts, mounting surfaces, and spare wheel.

9. Place the compact spare tire on

the wheel-mounting surface.

{ WARNING

Never use oil or grease on bolts or nuts because the nuts might come loose. The vehicle's wheel could fall off, causing a crash.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (84,1)

10-84

Vehicle Care

12. Tighten the wheel nuts firmly in

a crisscross sequence, as shown.

{ WARNING

Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should be tightened with a torque wrench to the proper torque specification after replacing. Follow the torque specification supplied by the aftermarket manufacturer when using accessory locking wheel nuts. See Capacities and Specifications on page 12‑2 for original equipment wheel nut torque specifications.

Notice: Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the

proper torque specification. See Capacities and Specifications on page 12‑2 for the wheel nut torque specification. Storing a Flat or Spare Tire and Tools

{ WARNING

Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.

To store a flat or spare tire and tools: 1. Return the jack and tools as they

were originally stored in the trunk.

2. Return the spare tire cover as it

3.

was in the trunk. Install the retainer nut and turn it clockwise until tight.

4. Return the rear trunk carpet. 5. Place the flat tire face up on the

load floor.

6. Route the strap provided, as shown, to secure the flat tire.

The compact spare tire is for temporary use only. Replace the compact spare with a full-size tire as soon as possible.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (85,1)

Compact Spare Tire { WARNING Driving with more than one compact spare tire at a time could result in loss of braking and handling. This could lead to a crash and you or others could be injured. Use only one compact spare tire at a time.

If this vehicle has a compact spare tire, it was fully inflated when new; however, it can lose air over time. Check the inflation pressure regularly. It should be 420 kPa (60 psi). Stop as soon as possible and check that the spare tire is correctly inflated after being installed on the vehicle. The compact spare tire is designed for temporary use only. The vehicle will perform differently with the spare tire installed and it is recommended that the vehicle speed be limited to 80 km/h

(50 mph). To conserve the tread of the spare tire, have the standard tire repaired or replaced as soon as convenient and return the spare tire to the storage area. Notice: When the compact spare is installed, do not take the vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails which can damage the tire, wheel, and other parts of the vehicle. Do not use the compact spare on other vehicles. Do not mix the compact spare tire or wheel with other wheels or tires. They will not fit. Keep the spare tire and its wheel together. Notice: Tire chains will not fit the compact spare. Using them can damage the vehicle and the chains. Do not use tire chains on the compact spare.

Vehicle Care

10-85

Jump Starting For more information about the vehicle battery, see Battery on page 10‑32. If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely.

{ WARNING

Batteries can hurt you. They can be dangerous because:

. They contain acid that can

burn you.

. They contain gas that can

explode or ignite.

. They contain enough electricity to burn you.

If you do not follow these steps exactly, some or all of these things can hurt you.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (86,1)

10-86

Vehicle Care

Notice: Ignoring these steps could result in costly damage to the vehicle that would not be covered by the warranty. Trying to start the vehicle by pushing or pulling it will not work, and it could damage the vehicle.

1. Remote Positve (+) Terminal 2. Remote Negative (-) Terminal The jump start remote positive (1) and negative (2) terminals are in the engine compartment on the driver side of the vehicle.

These terminals are used instead of a direct connection to the battery. The positive jump start connection is covered by a red cap. Remove to expose the terminal. 1. Check the other vehicle. It must

have a 12-volt battery with a negative ground system.

Notice: Only use a vehicle that has a 12-volt system with a negative ground for jump starting. If the other vehicle does not have a 12-volt system with a negative ground, both vehicles can be damaged. 2. Position the two vehicles so that

they are not touching.

3. Set the parking brake firmly.

Vehicles with an automatic transmission should be in P (Park). See Shifting Into Park on page 9‑21. Vehicles with a manual transmission should be in Neutral. See Parking (Manual Transmission) on page 9‑24.

Notice: If any accessories are left on or plugged in during the jump starting procedure, they could be damaged. The repairs would not be covered by the vehicle warranty. Whenever possible, turn off or unplug all accessories on either vehicle when jump starting the vehicle. 4. Turn the ignition to LOCK/OFF

and switch off all lights and accessories in both vehicles, except the hazard warning flashers if needed.

{ WARNING

An electric fan can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (87,1)

Vehicle Care

10-87

10. Try to start the vehicle that had

the dead battery. If it will not start after a few tries, it probably needs service.

Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by the vehicle warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal.

Jumper Cable Removal Reverse the sequence exactly when removing the jumper cables.

{ WARNING

{ WARNING

Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water. You do not need to add water to the battery installed in your new vehicle. But if a battery has filler caps, be sure the right amount of fluid is there. If it is low, add water to take care of that first. If you do not, explosive gas could be present. Battery fluid contains acid that can burn you. Do not get it on you. If you accidentally get it in your eyes or on your skin, flush the place with water and get medical help immediately.

Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running.

5. Connect one end of the red

positive (+) cable to the jump start positive (+) post.

6. Connect the other end of the red

positive (+) cable to the positive (+) terminal of the good battery.

7. Connect one end of the black

negative (–) cable to the negative (–) terminal of the good battery.

8. Connect the other end of the

black negative (–) cable to the negative (–) post.

9. Start the engine in the vehicle with the good battery and run the engine at idle speed for at least four minutes.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (88,1)

The vehicle was neither designed nor intended to be towed with any of its wheels on the ground. If the vehicle must be towed, see “Towing the Vehicle” earlier in this section.

10-88

Vehicle Care

Towing

Towing the Vehicle Notice: Incorrectly towing a disabled vehicle may cause damage. The damage would not be covered by the vehicle warranty. Have the vehicle towed on a flatbed car carrier. A wheel lift tow truck could damage the vehicle.

Due to low ramp angles on the ZL1, use care when loading the vehicle onto a flatbed carrier. Front spring spacers are provided for lifting the front suspension. Consult your dealer or a professional towing service if the disabled vehicle must be towed. To tow the vehicle behind another vehicle for recreational purposes, such as behind a motor home, see “Recreational Vehicle Towing” in this section.

Recreational Vehicle Towing Notice: Dolly towing or dinghy towing the vehicle may cause damage because of reduced ground clearance. Always put the vehicle on a flatbed truck or trailer.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (89,1)

Appearance Care

Exterior Care

Washing the Vehicle To preserve the vehicle's finish, wash it often and out of direct sunlight. Notice: Do not use petroleum-based, acidic, or abrasive cleaning agents as they can damage the vehicle's paint, metal, or plastic parts. If damage occurs, it would not be covered by the vehicle's warranty. Approved cleaning products can be obtained from your dealer. Follow all manufacturer directions regarding correct product usage, necessary safety precautions, and appropriate disposal of any vehicle care product. Notice: Avoid using high-pressure washes closer than 30 cm (12 in) to the surface of the vehicle. Use of power washers

exceeding 8,274 kPa (1,200 psi) can result in damage or removal of paint and decals. Rinse the vehicle well, before washing and after, to remove all cleaning agents completely. If they are allowed to dry on the surface, they could stain. Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting. Finish Care Application of aftermarket clearcoat sealant/wax materials is not recommended. If painted surfaces are damaged, see your dealer to have the damage assessed and repaired. Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage the vehicle's finish if they remain on painted surfaces. Wash the vehicle as soon as possible. If necessary, use non-abrasive

Vehicle Care

10-89

cleaners that are marked safe for painted surfaces to remove foreign matter. Occasional hand waxing or mild polishing should be done to remove residue from the paint finish. See your dealer for approved cleaning products. Do not apply waxes or polishes to uncoated plastic, vinyl, rubber, decals, simulated wood, or flat paint as damage can occur. Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may damage it. Use only non-abrasive waxes and polishes that are made for a basecoat/ clearcoat paint finish on the vehicle. To keep the paint finish looking new, keep the vehicle garaged or covered whenever possible.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (90,1)

10-90

Vehicle Care

Protecting Exterior Bright Metal Parts Regularly clean bright metal parts with water or chrome polish on chrome or stainless steel trim, if necessary. For aluminum, never use auto or chrome polish, steam, or caustic soap to clean. A coating of wax, rubbed to high polish, is recommended for all bright metal parts. Hood Air Extractor

It is not recommended that the air extractor on the ZL1 be waxed, as it will change the gloss level of the surface. In addition, care must be used when waxing around the air extractor. If a small amount of wax is applied to the extractor it can create an irregular appearance in the surface of the panel. If wax, debris, or other materials create stains on the air extractor, see your dealer for the recommended cleaner. The air extractor has vent screens in the openings. Keep leaves or other debris out of the vent screens. Notice: Pushing on the vent screens could damage them. Do not push on the screens when clearing. There is a water deflector on the underside of the air extractor. Do not remove it.

Convertible Top care Frequently hand wash convertible tops with mild car wash soap. Never use a stiff brush, steam, bleach, or aggressive cleaners. If necessary, a soft brush can be used to remove dirt. When finished cleaning, thoroughly rinse the fabric. Avoid automatic car washes with overhead brushes or very high pressure sprays as they can cause damage and leaking. Only lower the top when it is completely dry and avoid leaving the top lowered for extended periods of time to prevent excessive interior weathering. Avoid leaving large amounts of snow on the top for extended periods of time as damage may also occur. Cleaning Exterior Lamps/ Lenses and Emblems Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses and

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (91,1)

emblems. Follow instructions under "Washing the Vehicle" in this section. Windshield and Wiper Blades Clean the outside of the windshield with glass cleaner. Clean rubber blades using lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking. Replace the wiper blades if they are worn or damaged. Damage can be caused by extreme dusty conditions, sand, salt, heat, sun, snow and ice. Weatherstrips Apply silicone grease on weatherstrips to make them last longer, seal better, and not stick or squeak. Lubricate weatherstrips once a year. Black marks from

rubber material on painted surfaces can be removed by rubbing with a clean cloth. See Recommended Fluids and Lubricants on page 11‑12. Tires Use a stiff brush with tire cleaner to clean the tires. Notice: Using petroleum-based tire dressing products on the vehicle may damage the paint finish and/or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on the vehicle. Wheels and Trim — Aluminum or Chrome Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied. Notice: Chrome wheels and other chrome trim may be damaged if the vehicle is not washed after

Vehicle Care

10-91

driving on roads that have been sprayed with magnesium, calcium, or sodium chloride. These chlorides are used on roads for conditions such as ice and dust. Always wash the chrome with soap and water after exposure. Notice: To avoid surface damage, do not use strong soaps, chemicals, abrasive polishes, cleaners, brushes, or cleaners that contain acid on aluminum or chrome-plated wheels. Use only approved cleaners. Also, never drive a vehicle with aluminum or chrome-plated wheels through an automatic car wash that uses silicone carbide tire cleaning brushes. Damage could occur and the repairs would not be covered by the vehicle warranty. Steering, Suspension, and Chassis Components Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts or

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (92,1)

10-92

Vehicle Care

signs of wear. Inspect the power steering for proper hook-up, binding, leaks, cracks, chafing, etc. Visually check constant velocity joints, rubber boots, and axle seals for leaks. Body Component Lubrication Lubricate all key lock cylinders, hood hinges, liftgate hinges, and steel fuel door hinge unless the components are plastic. Applying silicone grease on weatherstrips with a clean cloth will make them last longer, seal better, and not stick or squeak. Underbody Maintenance Use plain water to flush dirt and debris from the vehicle's underbody. Your dealer or an underbody car washing system can do this. If not removed, rust and corrosion can develop.

Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty. Finish Damage Quickly repair minor chips and scratches with touch-up materials available from your dealer to avoid corrosion. Larger areas of finish damage can be corrected in your dealer's body and paint shop. Chemical Paint Spotting Airborne pollutants can fall upon and attack painted vehicle surfaces causing blotchy, ring-shaped

discolorations, and small, irregular dark spots etched into the paint surface.

Interior Care To prevent dirt particle abrasions, regularly clean the vehicle's interior. Immediately remove any soils. Note that newspapers or dark garments that can transfer color to home furnishings can also permanently transfer color to the vehicle's interior. Use a soft bristle brush to remove dust from knobs and crevices on the instrument cluster. Using a mild soap solution, immediately remove hand lotions, sunscreen, and insect repellent from all interior surfaces or permanent damage may result. Your dealer may have products for cleaning the interior. Use cleaners specifically designed for the surfaces being cleaned to prevent permanent damage. Apply all cleaners directly to the cleaning cloth. Do not spray cleaners directly

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (93,1)

on any switches or controls. Cleaners should be removed quickly. Never allow cleaners to remain on the surface being cleaned for extended periods of time. Cleaners may contain solvents that can become concentrated in the interior. Before using cleaners, read and adhere to all safety instructions on the label. While cleaning the interior, maintain adequate ventilation by opening the doors and windows. To prevent damage, do not clean the interior using the following cleaners or techniques: . Never use a razor or any other

sharp object to remove a soil from any interior surface.

. Never use a brush with stiff

bristles.

. Never rub any surface

aggressively or with excessive pressure.

. Do not use laundry detergents or

dishwashing soaps with degreasers. For liquid cleaners, use approximately 20 drops per 3.78 L (1 gal) of water. A concentrated soap solution will leave a residue that creates streaks and attracts dirt. Do not use solutions that contain strong or caustic soap.

. Do not heavily saturate the upholstery when cleaning.

. Do not use solvents or cleaners

containing solvents.

Interior Glass To clean, use a terry cloth fabric dampened with water. Wipe droplets left behind with a clean dry cloth. Commercial glass cleaners may be used, if necessary, after cleaning the interior glass with plain water. Notice: To prevent scratching, never use abrasive cleaners on automotive glass. Abrasive

Vehicle Care

10-93

cleaners or aggressive cleaning may damage the rear window defogger. Notice: Cleaning the windshield with water during the first three to six months of ownership will reduce tendency to fog. Speaker Covers Vacuum around a speaker cover gently, so that the speaker will not be damaged. Clean spots with just water and mild soap. Coated Moldings Coated moldings should be cleaned. . When lightly soiled, wipe with a

sponge or soft lint-free cloth dampened with water.

. When heavily soiled, use warm

soapy water.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (94,1)

10-94

Vehicle Care

Fabric/Carpet/Suede Start by vacuuming the surface using a soft brush attachment. If a rotating brush attachment is being used during vacuuming, only use it on the floor carpet. Before cleaning, gently remove as much of the soil as possible using one of the following techniques: . Gently blot liquids with a paper towel. Continue blotting until no more soil can be removed. For solid soils, remove as much as possible prior to vacuuming.

To clean: 1. Saturate a clean lint-free

colorfast cloth with water or club soda. Microfiber cloth is recommended to prevent lint transfer to the fabric or carpet.

2. Remove excess moisture by

gently wringing until water does not drip from the cleaning cloth.

3. Start on the outside edge of the

soil and gently rub toward the center. Fold the cleaning cloth to a clean area frequently to prevent forcing the soil in to the fabric.

4. Continue gently rubbing the soiled area until there is no longer any color transfer from the soil to the cleaning cloth. If the soil is not completely removed, use a mild soap solution followed only by club soda or plain water.

5.

If the soil is not completely removed, it may be necessary to use a commercial upholstery cleaner or spot lifter. Test a small hidden area for colorfastness before using a commercial upholstery cleaner or spot lifter. If ring formation occurs, clean the entire fabric or carpet. Following the cleaning process, a paper towel can be used to blot excess moisture.

Cleaning High Gloss Surfaces and Vehicle Information and Radio Displays For vehicles with high gloss surfaces or vehicle displays, use a microfiber cloth to wipe surfaces. Before wiping the surface with the microfiber cloth, use a soft bristle brush to remove dirt that could scratch the surface. Then use the microfiber cloth by gently rubbing to clean. Never use window cleaners or solvents. Periodically hand wash the microfiber cloth separately, using mild soap. Do not use bleach or fabric softener. Rinse thoroughly and air dry before next use. Instrument Panel, Leather, Vinyl, & Other Plastic Surfaces Use a soft microfiber cloth dampened with water to remove dust and loose dirt. For a more thorough cleaning, use a soft microfiber cloth dampened with a mild soap solution.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (95,1)

Notice: Soaking or saturating leather, especially perforated leather, as well as other interior surfaces, may cause permanent damage. Wipe excess moisture from these surfaces after cleaning and allow them to dry naturally. Never use heat, steam, spot lifters, or spot removers. Do not use cleaners that contain silicone or wax-based products. Cleaners containing these solvents can permanently change the appearance and feel of leather or soft trim and are not recommended. Do not use cleaners that increase gloss, especially on the instrument panel. Reflected glare can decrease visibility through the windshield under certain conditions. Notice: Use of air fresheners may cause permanent damage to plastics and painted surfaces. If an air freshener comes in contact with any plastic or painted surface in the vehicle, blot immediately and clean with a

soft cloth dampened with a mild soap solution. Damage caused by air fresheners would not be covered by the vehicle warranty. Cargo Cover and Convenience Net Wash with warm water and mild detergent. Do not use chlorine bleach. Rinse with cold water, and then dry completely. Care of Safety Belts Keep belts clean and dry. { WARNING

Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.

Vehicle Care

10-95

Floor Mats

{ WARNING

If a floor mat is the wrong size or is not properly installed, it can interfere with the pedals. Interference with the pedals can cause unintended acceleration and/or increased stopping distance which can cause a crash and injury. Make sure the floor mat does not interfere with the pedals.

Use the following guidelines for proper floor mat usage.

The original equipment floor mats were designed for your vehicle. If the floor mats need replacing, it is recommended that GM certified floor mats be purchased. Non-GM floor mats may not fit properly and may interefere with the pedals. Always check that the floor mats do not interfere with the pedals.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (96,1)

10-96

Vehicle Care

. Use the floor mat with the

correct side up. Do not turn it over.

. Do not place anything on top of

the driver side floor mat.

. Use only a single floor mat on

the driver side.

. Do not place one floor mat on

top of another.

Both floor mats are held in place by two hook-type retainers.

Removing and Replacing the Floor Mats 1. Pull up on the rear of the mat to

remove it from the hooks.

2. Reinstall by lining up the floor mat retainer openings over the carpet retainers and hook into position.

3. Make sure the floor mat is

properly secured and verify that it does not interfere with the pedals.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (1,1)

Service and Maintenance

General Information

General Information . . . . . . . . . . 11-1

Maintenance Schedule

Maintenance Schedule . . . . . . . 11-2

Special Application Services

Special Application

Services . . . . . . . . . . . . . . . . . . . . 11-8

Additional Maintenance and Care

Additional Maintenance

and Care . . . . . . . . . . . . . . . . . . . 11-9

Recommended Fluids, Lubricants, and Parts

Recommended Fluids and

Lubricants . . . . . . . . . . . . . . . . . 11-12

Maintenance Replacement

Parts . . . . . . . . . . . . . . . . . . . . . . 11-14

Maintenance Records

Maintenance Records . . . . . . 11-15

Service and Maintenance

11-1

General Information Your vehicle is an important investment. This section describes the required maintenance for the vehicle. Follow this schedule to help protect against major repair expenses resulting from neglect or inadequate maintenance. It may also help to maintain the value of the vehicle if it is sold. It is the responsibility of the owner to have all required maintenance performed. Your dealer has trained technicians who can perform required maintenance using genuine replacement parts. They have up‐to‐ date tools and equipment for fast and accurate diagnostics. Many dealers have extended evening and Saturday hours, courtesy transportation, and online scheduling to assist with service needs. Your dealer recognizes the importance of providing competitively priced maintenance and repair services. With trained

technicians, the dealer is the place for routine maintenance such as oil changes and tire rotations and additional maintenance items like tires, brakes, batteries, and wiper blades. Notice: Damage caused by improper maintenance can lead to costly repairs and may not be covered by the vehicle warranty. Maintenance intervals, checks, inspections, recommended fluids, and lubricants are important to keep the vehicle in good working condition. The Tire Rotation and Required Services are the responsibility of the vehicle owner. It is recommended to have your dealer perform these services every 12 000 km/7,500 mi. Proper vehicle maintenance helps to keep the vehicle in good working condition, improves fuel economy, and reduces vehicle emissions.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (2,1)

11-2

Service and Maintenance

Frequently towing a trailer.

. Used for high speed or

competitive driving.

. Used for taxi, police, or delivery

service.

Refer to the information in the Maintenance Schedule Additional Required Services ‐ Severe chart.

{ WARNING

Performing maintenance work can be dangerous and can cause serious injury. Perform maintenance work only if the required information, proper tools, and equipment are available. If they are not, see your dealer to have a trained technician do the work. See Doing Your Own Service Work on page 10‑4.

Because of the way people use vehicles, maintenance needs vary. There may need to be more frequent checks and services. The Additional Required Services ‐ Normal are for vehicles that: . Carry passengers and cargo within recommended limits on the Tire and Loading Information label. See Vehicle Load Limits on page 9‑12.

. Are driven on reasonable road

surfaces within legal driving limits.

. Use the recommended fuel. See

Recommended Fuel on page 9‑48.

Refer to the information in the Maintenance Schedule Additional Required Services ‐ Normal chart. The Additional Required Services ‐ Severe are for vehicles that are: . Mainly driven in heavy city traffic

in hot weather.

. Mainly driven in hilly or

mountainous terrain.

Maintenance Schedule

Owner Checks and Services

At Each Fuel Stop . Check the engine oil level. See

Engine Oil on page 10‑12.

Once a Month . Check the tire inflation

pressures. See Tire Pressure on page 10‑56. Inspect the tires for wear. See Tire Inspection on page 10‑62.

. Check the windshield washer

fluid level. See Washer Fluid on page 10‑29.

Engine Oil Change When the CHANGE ENGINE OIL SOON message displays, have the engine oil and filter changed within the next 1 000 km/600 mi. If driven under the best conditions, the engine oil life system might not indicate the need for vehicle service

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (3,1)

Service and Maintenance

11-3

for more than a year. The engine oil and filter must be changed at least once a year and the oil life system must be reset. Your trained dealer technician can perform this work. If the engine oil life system is reset accidentally, service the vehicle within 5 000 km/3,000 mi since the last service. Reset the oil life system when the oil is changed. See Engine Oil Life System on page 10‑15. Tire Rotation and Required Services Every 12 000 km/ 7,500 mi Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation on page 10‑63. . Check engine oil level and oil

life percentage. If needed, change engine oil and filter, and reset oil life system. See Engine Oil on page 10‑12 and Engine Oil Life System on page 10‑15.

. Check engine coolant level. See Engine Coolant on page 10‑22. . Check windshield washer fluid

level. See Washer Fluid on page 10‑29.

. Visually inspect windshield wiper

blades for wear, cracking, or contamination. See Exterior Care on page 10‑89. Replace worn or damaged wiper blades. See Wiper Blade Replacement on page 10‑35.

. Check tire inflation pressures.

See Tire Pressure on page 10‑56. Inspect tire wear. See Tire Inspection on page 10‑62.

. Visually check for fluid leaks.

Inspect engine air cleaner filter. See Engine Air Cleaner/Filter (Except ZL1) on page 10‑17 or Engine Air Cleaner/Filter (ZL1
Only) on page 10‑18. Inspect brake system.

. Visually inspect steering, suspension, and chassis components for damaged, loose, or missing parts or signs of wear. See Exterior Care on page 10‑89.

. Check restraint system

components. See Safety System Check on page 3‑14.

. Visually inspect fuel system for

damage or leaks.

. Visually inspect exhaust system

and nearby heat shields for loose or damaged parts. Lubricate body components. See Exterior Care on page 10‑89.

. Check starter switch. See Starter

Switch Check on page 10‑33. . Check automatic transmission shift lock control function. See Automatic Transmission Shift Lock Control Function Check on page 10‑34.

. Check ignition transmission lock.

See Ignition Transmission Lock Check on page 10‑34.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (4,1)

11-4

Service and Maintenance

. Check parking brake and

automatic transmission park mechanism. See Park Brake and P (Park) Mechanism Check on page 10‑34.

. Check accelerator pedal for

damage, high effort, or binding. Replace if needed.

. Visually inspect gas strut for

signs of wear, cracks, or other damage. Check the hold open ability of the strut. See your dealer if service is required. . Check tire sealant expiration

date, if equipped. See Tire Sealant and Compressor Kit on page 10‑72. Inspect sunroof track and seal, if equipped. See Sunroof on page 2‑16.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (5,1)

Service and Maintenance

11-5

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (6,1)

11-6

Service and Maintenance

(5) Or every 10 years, whichever comes first. (6) Inspect for fraying, excessive cracking, or damage; replace, if needed.

Footnotes — Maintenance Schedule Additional Required Services — Normal (1) Or every two years, whichever comes first. More frequent replacement may be needed if the vehicle is driven in areas with heavy traffic, areas with poor air quality, or areas with high dust levels. Replacement may also be needed if there is a reduction in air flow, excessive window fogging, or odors. (2) Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve, if the vehicle has one, works properly. Replace as needed. (3) Or every four years, whichever comes first. (4) Or every five years, whichever comes first. See Cooling System (Except ZL1 Engine) on page 10‑19
or Cooling System (ZL1 Engine Only) on page 10‑21 or Cooling System (Intercooler) on page 10‑22.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (7,1)

Service and Maintenance

11-7

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (8,1)

11-8

Service and Maintenance

(5) Or every 10 years, whichever comes first. (6) Inspect for fraying, excessive cracking, or damage; replace, if needed.

Special Application Services . Severe Commercial Use

Vehicles Only: Lubricate chassis components every 5 000 km/ 3,000 mi.

. Have underbody flushing service

performed once a year.

Footnotes — Maintenance Schedule Additional Required Services — Severe (1) Or every two years, whichever comes first. More frequent replacement may be needed if the vehicle is driven in areas with heavy traffic, areas with poor air quality, or areas with high dust levels. Replacement may also be needed if there is a reduction in air flow, excessive window fogging, or odors. (2) Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve, if the vehicle has one, works properly. Replace as needed. (3) Or every four years, whichever comes first. (4) Or every five years, whichever comes first. See Cooling System (Except ZL1 Engine) on page 10‑19
or Cooling System (ZL1 Engine Only) on page 10‑21 or Cooling System (Intercooler) on page 10‑22.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (9,1)

Service and Maintenance

11-9

Additional Maintenance and Care Your vehicle is an important investment and caring for it properly may help to avoid future costly repairs. To maintain vehicle performance, additional maintenance services may be required. It is recommended that your dealer perform these services — their trained dealer technicians know your vehicle best. Your dealer can also perform a thorough assessment with a multi‐point inspection to recommend when your vehicle may need attention. The following list is intended to explain the services and conditions to look for that may indicate services are required.

Battery The battery supplies power to start the engine and operate any additional electrical accessories.

To avoid break‐down or failure to start the vehicle, maintain a battery with full cranking power. Trained dealer technicians have the diagnostic equipment to test the battery and ensure that the connections and cables are corrosion‐free.

Belts . Belts may need replacing if they

squeak or show signs of cracking or splitting. Trained dealer technicians can inspect the belts and recommend replacement when necessary.

Brakes Brakes stop the vehicle and are crucial to safe driving. . Signs of brake wear may include

chirping, grinding, or squealing noises, or difficulty stopping.

Trained dealer technicians have access to tools and equipment to inspect the brakes and recommend quality parts engineered for the vehicle.

Fluids Proper fluid levels and approved fluids protect the vehicle’s systems and components. See Recommended Fluids and Lubricants on page 11‑12 for GM approved fluids. . Engine oil and windshield

washer fluid levels should be checked at every fuel fill. Instrument cluster lights may come on to indicate that fluids may be low and need to be filled.

Hoses Hoses transport fluids and should be regularly inspected to ensure that there are no cracks or leaks. With a multi‐point inspection, your dealer can inspect the hoses and advise if replacement is needed.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (10,1)

11-10

Service and Maintenance

Lamps Properly working headlamps, taillamps, and brake lamps are important to see and be seen on the road. . Signs that the headlamps need

attention include dimming, failure to light, cracking, or damage. The brake lamps need to be checked periodically to ensure that they light when braking. . With a multi‐point inspection,

your dealer can check the lamps and note any concerns.

Shocks and Struts Shocks and struts help aid in control for a smoother ride. . Signs of wear may include

steering wheel vibration, bounce/ sway while braking, longer stopping distance, or uneven tire wear.

. As part of the multi‐point inspection, trained dealer technicians can visually inspect

the shocks and struts for signs of leaking, blown seals, or damage, and can advise when service is needed.

Tires Tires need to be properly inflated, rotated, and balanced. Maintaining the tires can save money, fuel, and can reduce the risk of tire failure. . Signs that the tires need to be replaced include three or more visible treadwear indicators; cord or fabric showing through the rubber; cracks or cuts in the tread or sidewall; or a bulge or split in the tire. Trained dealer technicians can inspect and recommend the right tires. Your dealer can also provide tire/wheel balancing services to ensure smooth vehicle operation at all speeds. Your dealer sells and services name brand tires.

Vehicle Care To help keep the vehicle looking like new, vehicle care products are available from your dealer. For information on how to clean and protect the vehicle’s interior and exterior, see Interior Care on page 10‑92 and Exterior Care on page 10‑89.

Wheel Alignment Wheel alignment is critical for ensuring that the tires deliver optimal wear and performance. . Signs that the alignment may

need to be adjusted include pulling, improper vehicle handling, or unusual tire wear.

. Your dealer has the required equipment to ensure proper wheel alignment.

Windshield For safety, appearance, and the best viewing, keep the windshield clean and clear.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (11,1)

Service and Maintenance

11-11

. Signs of damage include

scratches, cracks, and chips. Trained dealer technicians can inspect the windshield and recommend proper replacement if needed.

Wiper Blades Wiper blades need to be cleaned and kept in good condition to provide a clear view. . Signs of wear include streaking, skipping across the windshield, and worn or split rubber. Trained dealer technicians can check the wiper blades and replace them when needed.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (12,1)

11-12

Service and Maintenance

Recommended Fluids, Lubricants, and Parts

Recommended Fluids and Lubricants

Usage

Engine Oil

Engine Coolant

Hydraulic Brake System

Windshield Washer

Hydraulic Clutch System

Hydraulic Power Steering System

Parking Brake Cable Guides

Automatic Transmission

Manual Transmission (V6 Engine)

Fluid/Lubricant

Use only engine oil licensed to the dexos1 specfication, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. See Engine Oil on page 10‑12. 50/50 mixture of clean, drinkable water and use only DEX-COOL Coolant. See Engine Coolant on page 10‑22. DOT 3 Hydraulic Brake Fluid (GM Part No. 88862806, in Canada 88862807). Automotive windshield washer fluid that meets regional freeze protection requirements. DOT 3 Hydraulic Brake Fluid (GM Part No. 88862806, in Canada 88862807). GM Power Steering Fluid (GM Part No. U.S. 89020661, in Canada 89021186). Chassis Lubricant (GM Part No. 12377985, in Canada 88901242) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB. DEXRON®-VI Automatic Transmission Fluid. SAE 75W-90 GL5 Gear Oil (GM Part No. 88862475, in Canada 88862476).

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (13,1)

Service and Maintenance

11-13

Usage

Fluid/Lubricant

Manual Transmission (V8 Engine)

Rear Axle (V6 Engine with Automatic

Transmission)

Rear Axle (V6 Engine with Manual

Transmission)

Rear Axle (SS)

Rear Axle (ZL1)

Key Lock Cylinders

Hood Latch Assembly, Secondary Latch, Pivots, Spring Anchor, and

Release Pawl

Hood and Door Hinges

Weatherstrip Conditioning

Manual Transmission Fluid (GM Part No. 88861800, in Canada 88861801). Rear Differential Fluid 75W-90 (GM Part No. 89021677, in Canada 89021678). Rear Differential Fluid 75W-90 Limited Slip (GM Part No. 89021677 and Friction Modifier 1052358, in Canada 89021678 and Friction Modifier 992694). Rear Differential Fluid 75W-90 Limited Slip (GM Part No. 89021677 and Friction Modifier 1052358, in Canada 89021678 and Friction Modifier 992694). Rear Differential Fluid Dextron LS Gear 75W-90 (GM Part No. 88862624, in Canada 88862625). Multi-Purpose Lubricant, Superlube (GM Part No. 12346241, in Canada 10953474). Lubriplate Lubricant Aerosol (GM Part No. 89021668, in Canada 89021674) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB. Multi-Purpose Lubricant, Superlube (GM Part No. 12346241, in Canada 10953474). Weatherstrip Lubricant (GM Part No. 3634770, in Canada 10953518) or Dielectric Silicone Grease (GM Part No. 12345579, in Canada 10953481).

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (14,1)

11-14

Service and Maintenance

Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your dealer.

Part

GM Part Number

ACDelco Part Number

Engine Air Cleaner/Filter (except ZL1) Engine Air Cleaner/Filter (ZL1) Engine Oil Filter

3.6L V6 Engine 6.2L V8 Engine

Passenger Compartment Air Filter Spark Plugs

3.6L V6 Engine 6.2L V8 Engine (L99 or LS3) 6.2L V8 Engine (LSA)

Wiper Blades Driver Side Passenger Side

92196275
92229651

25177917
89017524
92234714

12622561
12621258
12571165

92231676
92231677

A3137C

—

PF2129

PF48

—

41-109
41-110
41-104

—

—

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (15,1)

Service and Maintenance

11-15

Maintenance Records After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts.

Date

Odometer Reading

Serviced By

Services Performed

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (16,1)

11-16

Service and Maintenance

Date

Odometer Reading

Serviced By

Services Performed

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (17,1)

Date

Odometer Reading

Serviced By

Services Performed

Service and Maintenance

11-17

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (18,1)

11-18

Service and Maintenance

Date

Odometer Reading

Serviced By

Services Performed

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (1,1)

Technical Data

Vehicle Identification

Vehicle Identification

Vehicle Identification

Number (VIN) . . . . . . . . . . . . . . 12-1

Service Parts Identification

Label . . . . . . . . . . . . . . . . . . . . . . . 12-1

Vehicle Data

Capacities and

Specifications . . . . . . . . . . . . . . 12-2
Engine Drive Belt Routing . . . 12-5

Vehicle Identification Number (VIN)

This legal identifier is in the front corner of the instrument panel, on the left side of the vehicle. It can be seen through the windshield from outside. The VIN also appears on the Vehicle Certification and Service Parts labels and certificates of title and registration.

Technical Data

12-1

Engine Identification The eighth character in the VIN is the engine code. This code identifies the vehicle's engine, specifications, and replacement parts. See “Engine Specifications” under Capacities and Specifications on page 12‑2 for the vehicle's engine code.

Service Parts Identification Label This label, in the trunk, has the following information: . Vehicle Identification

Number (VIN).

. Model designation. . Paint information. . Production options and special

equipment.

Do not remove this label from the vehicle.

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (2,1)

12-2

Technical Data

Vehicle Data

Capacities and Specifications

Application

Air Conditioning Refrigerant R134a

Engine Cooling System

3.6L V6 Engine (LFX) Automatic Transmission 3.6L V6 Engine (LFX) Manual Transmission 6.2L V8 Engine (L99) Automatic Transmission 6.2L V8 Engine (LS3) Manual Transmission 6.2L V8 Engine (LSA)

Cooling System — Intercooler (ZL1) Engine Oil with Filter

3.6L V6 Engine (LFX) 6.2L V8 Engine

Fuel Tank

Capacities

Metric

English

For the air conditioning system refrigerant charge amount, see the refrigerant label under the hood.

See your dealer for more information.

10.2 L 10.6 L 10.8 L 11.2 L 10.9 L 2.3 L

5.7 L 7.6 L 71.0 L

10.8 qt 11.2 qt 11.4 qt 11.8 qt 11.5 qt 2.4 qt

6.0 qt 8.0 qt 18.8 gal

Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12

Black plate (3,1)

Application

Rear Axle Fluid

V6 Engine 6–Speed Automatic V6 Engine 6–Speed Manual* V8 Engine* (L99 or LS3) V8 Engine (LSA) Transmission Fluid

Automatic — V6 and V8 (Pan Removal and Filter Replacement)**