Login- Download PDF Manual
-
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
225
2.
Insert the snap-in adapter at the front, ar‐ row 1, and press down, arrow 2, until it en‐ gages.
Removing the mobile phone
Press the button and remove the mobile phone.
To remove the snap-in adapter: press button 1.
Inserting the mobile phone
1. Depending on the mobile phone, remove the protective cap from the antenna con‐ nector and from the USB connection of the mobile phone.
2. With the buttons facing up, slide the mobile phone up toward the electrical contacts and press it down until it engages.
226
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Office* At a glance General information Contacts, appointments, tasks, notes, text mes‐ sages, and e-mails* from the mobile phone can be displayed on the Control Display if the mobile phone provides compatible support of these functions and the necessary Bluetooth stand‐ ards. Information about which mobile phones support the Office functions can be found at www.bmwusa.com/bluetooth. A limited number of compatible mobile phones is available for Of‐ fice. Contents are only displayed in full length when the vehicle is stationary. The mobile phone has read-access only.
Do not use Office while driving To avoid becoming distracted and posing an unnecessary hazard to your vehicle's occu‐ pants and to other road users, never attempt to use the controls or enter information unless traf‐ fic and road conditions allow this.◀
Requirements ▷ A suitable mobile phone is paired with the
vehicle and connected. In some mobile phones, data access must be confirmed on the mobile phone.
▷ The time, time zone, and date, refer to
page 78, are correctly set on the Control Display and on the mobile phone, for in‐ stance to correctly display appointments.
▷ Office is activated, refer to page 217. Updating Data are updated every time the mobile phone is connected to the vehicle. Appointment en‐ tries, tasks, notes and reminders can be updated separately.
1. "Office" 2. "Current office", "Calendar", "Tasks",
"Notes" or "Reminders"
3. Open "Options". 4. "Update data"
Cell phone data are transmitted again to the vehicle.
Office information The number of unread messages and active tasks as well as the upcoming appointments are displayed. 1. "Office" 2. "Current office" 3. Select the desired entry to display details.
Contacts At a glance Contacts can be created and edited. The con‐ tacts from the mobile phone* are displayed as well if this function is supported by the mobile phone. The addresses can be adopted as des‐ tinations for navigation and the phone numbers can be dialed. Displaying contacts General information 1. "Office"
227
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
2. "Contacts"
All contacts are listed in alphabetical order. De‐ pending on the number of contacts, an A-Z search is offered, refer to page 23. A symbol indicates the storage location of the contacts. Symbol No sym‐ bol
Storage location In the vehicle; the address has not been checked as a destination. In the vehicle; the address has been checked as a destination*. Mobile phone*.
Dialing phone numbers* 1. Select the desired contact. 2. Select the phone number.
The connection is established.
Editing a contact 1. Select the desired contact. 2. "Edit contact"
When a contact is edited, the changes are not stored on the mobile phone. A copy of the entry is stored in the vehicle. Selecting the contact as a navigation destination* 1. Select the desired contact. 2. Select the address.
When contacts from the mobile phone are used, the address may need to be matched to the navigation data contained in the vehi‐ cle. In this case: Correct the address.
3. "Start guidance" or "Add as another
destination"
Checking the address as a destination* An address that is to be used for destination guidance must match the navigation data con‐ tained in the vehicle. The address can be checked for this purpose. 1. Select the desired contact and highlight the
address.
2. Open "Options". 3. "Check as destination" 4. Correct and store the address if necessary. If the address is corrected and stored, a copy of it is stored in the vehicle. The address is not changed on the mobile phone. New contact A contact can have up to 8 phone numbers, 2 addresses, 3 e-mail addresses and one Inter‐ net address. 1. "Office" 2. "Contacts" 3. Open "Options".
3. Change the entries. 4. "Store contact in vehicle"
228
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
4. "New contact"
5. The entry fields are still filled with the previ‐
ous entries: "Delete input fields"
6. Fill in the entry fields: select the symbol next
to the entry field.
7. Enter the text and assign the contact type. If the vehicle is equipped with a navigation 8. system: enter the address. Only addresses contained in the navigation data in the vehi‐ cle can be entered. This ensures that desti‐ nation guidance is possible for all ad‐ dresses. If necessary, "Accept address".
9. "Store contact in vehicle" Contact types Various contact types can be assigned to phone numbers and addresses. Symbol
Meaning Home phone number. Business phone number. Mobile phone number. Other phone number. Home address. Business address.
Specifying the home address A home address can be stored. It appears at the top of the contact list. 1. "Office" 2. "Contacts"
3. "Home" 4. Create a contact. 5. "Store contact in vehicle" Selecting the sorting order of the names* Names can be displayed in a different order. 1. "Office" 2. "Contacts" 3. Open "Options". 4. "Display: last, first name" or "Display: first,
last name"
Depending on how the contacts were stored on the mobile phone, the sorting order of the names may differ from the selected sorting order. Show contact pictures Pictures stored with the contacts are stored in the vehicle when the mobile phone is connected to the vehicle. The number of transmitted pic‐ tures depends on the mobile phone. The mobile phone must support this function. 1. "Office" 2. "Contacts" 3. Open "Options". 4. "Show images" Display of all contact pictures is activated or de‐ activated. Deleting contacts Only contacts that are stored in the vehicle are deleted. The contacts on the mobile phone* cannot be deleted. 1. "Office" 2. "Contacts" 3. Highlight the contact. 4. Open "Options". 5. "Delete contact" or "Delete all contacts" 6.
If necessary. "Yes"
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
229
e
Messages General information Whether or not text messages and e-mails from the mobile phone are displayed depends on whether transmission from the mobile phone to the vehicle is supported. Text messages and e- mails may not be supported by the service pro‐ vider, or the function may need to be enabled separately. After the mobile phone is first paired, transmission may take several minutes. Mes‐ sages are only displayed in full length when the vehicle is stationary. Messages from the addi‐ tional telephone are not transmitted. Display of different messages: ▷ Text messages. ▷ Message from My Info*. ▷ Messages from the BMW Assist Concierge
service*.
▷ E-mails from the mobile phone*. Displaying messages 1. "Office" 2. "Messages" A symbol identifies the type of message. Symbol Message type Text messages. My Info Message from the Concierge serv‐ ice. E-mail from mobile phone.
Filtering the message list The message list can be filtered, when more than one type of message exists.
1. "Filter:"
2. Select the type of message.
▷ "All"
All messages are displayed.
▷ "E-mail"
Only e-mails from the mobile phone are displayed.
▷ "Service message"
Only messages from the BMW Assist Concierge service and My Info are dis‐ played.
▷ "Text message"
Only text messages from the mobile phone are displayed.
Deleting messages Messages from the Concierge service and My Info can be deleted. Delete a message: 1. "Office" 2. "Messages" 3. Select the desired message. 4. Open "Options". 5. "Delete message" Delete all messages: 1. "Office" 2. "Messages" 3. Open "Options". 4. "Delete all messages" or "Delete service
messages"
230
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Text messages Using contact data Contact data from appointments, tasks, text messages, e-mails, and notes can be saved or selected*, refer to page 233. Reading the text message out loud* Read the text message out loud, refer to page 234. My Info Starting destination guidance 1. Select the desired message. 2. "Start guidance" or "Add as another
destination"
Dialing the number in the message Up to 4 phone numbers can be transmitted with a message. 1. Select the desired message. 2.
"Call":
If the message contains a number, the con‐ nection is established.
"Select phone number":
If the message contains more than one num‐ ber, select the desired number from the list. The connection is established.
Message from the Concierge service* Starting destination guidance 1. Select the desired message.
2.
"Start guidance" or "Add as another
destination"
3. Start destination guidance, if necessary. Dialing the number in the message Up to 4 phone numbers can be transmitted with a message. 1. Select the desired message. 2.
"Call":
If the message contains a number, the con‐ nection is established.
"Select phone number":
If the message contains more than one num‐ ber, select the desired number from the list. The connection is established.
Storing an address 1. Select the desired message. 2. Open "Options". 3. "Store contact in vehicle" Displaying additional information 1. Select the desired message. 2. "Further information" E-mail* Displaying e-mails 1. "Office" 2. "Messages" 3. Select the desired e-mail.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
231
e
Displaying e-mail contacts If the sender and recipient of an e-mail are trans‐ mitted by the mobile phone, this information is displayed in the e-mail. "Sender/Recipient"
If the e-mail addresses are stored in the con‐ tacts, the contact is displayed. Select the con‐ tact to display details. If the e-mail addresses are not stored in the con‐ tacts, only the e-mail address is displayed. Using contact data Contact data from appointments, tasks, text messages, e-mails, and notes can be saved or selected*, refer to page 233. Deactivating the full display When an e-mail is opened in the vehicle, the e- mail is fully transmitted to the vehicle. This may result in charges. 1. "Office" 2. "Messages" 3. Open "Options". 4. "Fully download e-mails"
Only a part of the email from the cell phone is loaded into the vehicle.
Reading the e-mail out loud* Read the e-mail out loud, refer to page 234.
Calendar Display the calendar Appointments during the last 20 days and the next 50 days can be displayed. 1. "Office" 2. "Calendar"
The appointments on the current day are displayed.
Selecting the calendar day 1. Select the date.
2. Select the desired day or date.
▷ "Next day" ▷ "Date:" ▷ "Previous day" ▷ "Today"
Display the appointment 1. Select the desired appointment. 2. Scroll through the appointment if neces‐
sary: ▷ Turn the controller. ▷
Select the symbol.
Using contact data Contact data from appointments, tasks, text messages, e-mails, and notes can be saved or selected*, refer to page 233. Reading the appointment out loud* Read the appointment out loud, refer to page 234.
Tasks Displaying the task list Display tasks that are due within the next 90 days. 1. "Office" 2. "Tasks"
232
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Sorting the task list 1. Select the header in the task list.
Displaying the note 1. Select the desired note.
2. Select the sorting criterion:
2. Scroll in the note if necessary:
▷ "Priority (!)"* ▷ "Subject" ▷ "Due date"
Displaying the task 1. Select the desired task. 2. Scroll in the task if necessary:
▷ Turn the controller. ▷
Select the symbol.
Using contact data Contact data from appointments, tasks, text messages, e-mails, and notes can be saved or selected*, refer to page 233. Reading the task out loud* Read the task out loud, refer to page 234.
Notes Displaying notes 1. "Office" 2. "Notes"
All notes are displayed.
▷ Turn the controller. ▷
Select the symbol.
Using contact data Contact data from appointments, tasks, text messages, e-mails, and notes can be saved or selected*, refer to page 233. Reading the note out loud* Read the note out loud, refer to page 234.
Reminders Displaying reminders Reminders of pending appointments and tasks are displayed. After an appointment or after a task is due, the reminder is no longer displayed. 1. "Office" 2. "Reminders" 3. Select the desired reminder. The corresponding appointment or the task are displayed.
Using contact data At a glance Contact data from appointments, tasks, text messages, emails, and notes can be stored or selected*.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
233
e
Displaying contact or selecting phone number 1. 2. Display the contact or select the phone
"Use contact data"
number: ▷ Select the contact to display contact de‐
tails.
▷ Select the phone number to establish a
connection directly.
Storing contact data 1. "Use contact data" 2. Highlight the phone number or e-mail ad‐
dress.
3. Open "Options". 4. "Add to existing contact" or "Store as new
contact"
Reading out loud* Text messages, e-mails, appointment entries, tasks, and notes can be read out loud. 1. Select the desired message, appointment,
task, or note.
Select the symbol.
2. The following options are available during read‐ ing: ▷
"Pause" Interrupt reading. Select again to restart reading.
▷
▷
▷
"Back to beginning"
Start reading the message again from the beginning.
Select the symbol.
Go back one paragraph.
Select the symbol.
Skip a paragraph.
▷ To end reading, turn the controller to the left.
What to do if... Information on suitable mobile phones, refer to page 216. Appointments, tasks, notes, text messages, or e-mails from the mobile phone are not dis‐ played. ▷ The mobile phone is not capable of the
missing function or is not connected cor‐ rectly.
▷ The Office function is deactivated. ▷ The mobile phone is connected as an addi‐
tional phone.
▷ Appointments are older than 20 days or are
more than 50 days in the future.
▷ The tasks have been marked as completed
or have a due date that lies more than 90 days in the future.
▷ Depending on the number of stored ap‐ pointments, task notes, and messages in the mobile phone, not all are displayed in the vehicle.
Not all appointments and tasks from the mobile phone are displayed at the right time? ▷ The time zone, time, or date is incorrectly set
on the Control Display and mobile phone.
The e-mail attachment is not displayed. ▷ E-mails are transmitted without an attach‐
ment.
Entries are not displayed in full length. ▷ Text were already transmitted from the mo‐
bile phone in a shortened form.
▷ Synchronization between the mobile phone
and vehicle may take several minutes.
The contact pictures are not being displayed? ▷ Up to 200 contact pictures can be stored in
the vehicle.
The E-mail is displayed with a delay? ▷ Check the e-mail settings on the telephone
and adjust if necessary.
If all points in this list have been checked and the required function is still not available, please contact the hotline or service center.
234
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Contacts* General information Contacts can be created and edited and the ad‐ dresses can be adopted as destinations for nav‐ igation.
New contact 1. "Contacts" 2. "New contact"
3. The entry fields are still filled with the previ‐
ous entries: "Delete input fields"
4. Fill in the entry fields: select the symbol next
to the entry field.
5. Enter the text, refer to page 23.
In vehicles equipped with a navigation sys‐ tem: it is only possible to enter addresses that are contained in the vehicle navigation data. This ensures that destination guid‐ ance is possible for all addresses. If necessary, "Store".
6. 7. "Store contact in vehicle"
Specifying the home address A home address can be stored. It appears at the top of the contact list. 1. "Home" 2. Create a contact. 3. "Store contact in vehicle"
My contacts General information List of all contacts. Displaying contacts 1. "Contacts" 2. "My contacts"
All contacts are listed in alphabetical order. De‐ pending on the number of contacts, an A-Z search is offered, refer to page 23. A symbol indicates the storage location of the contacts: Symbol No symbol
Storage location In the vehicle; the address has not been checked as a destination. In the vehicle; the address has been checked as a destination.
Editing a contact 1. "My contacts" 2. Select the desired contact.
235
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
3. "Edit contact"
Deleting contacts 1. "My contacts" 2. Highlight the contact. 3. Open "Options". 4. "Delete contact" or "Delete all contacts"
4. Change the entries. 5. Move the controller to the left. 6. "Yes" Selecting the contact as a navigation destination* 1. Select the desired contact. 2. Select the address. 3. "Start guidance" or "Add as another
destination"
Checking the address as a destination* An address that is to be used for destination guidance must match the navigation data con‐ tained in the vehicle. The address can be checked for this purpose. 1. Select the desired contact and highlight the
address.
2. Open "Options". 3. "Check as destination" 4. Correct and store the address if necessary. Selecting the sorting order of the names Names can be displayed in a different order. 1. "My contacts" 2. Open "Options". 3. "Display: last, first name" or "Display: first,
last name"
236
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
ConnectedDrive* BMW Assist* General information BMW Assist provides you with certain services, e.g., transmission of the position data of your vehicle to the BMW Assist Response Center if an Emergency Request* has been initiated. Many BMW Assist services depend on the indi‐ vidually agreed upon contract. After your contract has expired, the BMW Assist system will be deactivated by the BMW Assist Response Center without your having to visit a service center. After the BMW Assist system has been deactivated, no BMW Assist services will be available. The BMW Assist system can be reactivated by a service center after you sign a new contract. Requirements ▷ The installed BMW Assist system is logged
in to a wireless communications network. This network must be capable of transmit‐ ting the services.
▷ To transmit position data, the vehicle must be able to determine the current position.
▷ The BMW Assist service contract was
signed with your service center or with the BMW Assist Response Center. Enabling must have been completed.
▷ BMW Assist is activated. Services offered ▷ Emergency Request: when you press the SOS button, a connection to the BMW As‐ sist Response Center is established. The BMW Assist Response Center then speaks with you and takes further steps to help you. ▷ Automatic Collision Notification: under cer‐ tain conditions, a connection is established to the BMW Assist Response Center after a serious accident. If possible, the BMW As‐
sist Response Center then speaks with you and takes further steps to help you.
▷ Enhanced Roadside Assistance: BMW
Roadside Assistance* can be contacted if assistance is needed in the event of a break‐ down. If possible, the vehicle and position data are transmitted in the process.
▷ Customer Relations: connection with Cus‐
tomer Relations for information on all as‐ pects of your vehicle.
▷ TeleService: data on your vehicle's service status or required inspections are transmit‐ ted to your service center, either automati‐ cally before a service due date or when you request a BMW service appointment.
▷ Remote Door Unlock: the BMW Assist Re‐ sponse Center provides assistance if, for ex‐ ample, the remote control is not available and the vehicle needs to be opened.
▷ Stolen Vehicle Recovery: after you report
that your vehicle was stolen to the police, the BMW Assist Response Center can deter‐ mine its position.
▷ In addition to these services, the optional
Convenience Plan offers Concierge service and information for route planning, traffic, and weather. A limited number of calls can be made via the BMW Assist Response Center with Critical Calling if, for example, the mobile phone is not available or dis‐ charged. Press the SOS button to contact the BMW Assist Response Center.
TeleService* General information TeleService supports communication with your service center. ▷ Data on the vehicle's service requirements can be sent directly to the service center. In this way, the service center can plan its work
237
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
e
in advance. This shortens the duration of the service appointment.
▷ In the event of a breakdown, data on the ve‐
hicle's condition can be sent directly to Roadside Assistance*.
▷ The service varies by country. ▷ Connection costs may ensue. ▷ Services may be restricted abroad. Requirements ▷ BMW Assist is activated.
If BMW Assist is not activated, a mobile phone that has been recommended by BMW for TeleService and that is configured for mobile data communication must be connected with the vehicle.
▷ Wireless reception is available. ▷ The engine is running. Using BMW TeleService* BMW TeleService are typically activated in the vehicle. Even if the BMW TeleService are not active, a voice contact to Roadside Assistance* is still possible. To continue using or to deactivate the services, please contact your service partner or the BMW customer hotline.
Concierge service* General information The BMW Assist Concierge service offers infor‐ mation on events, gas stations, and hotels, and provides phone numbers and addresses. Hotels can be booked directly by the BMW Assist Con‐ cierge service. The Concierge service is part of the optional Convenience Plan. Starting the Concierge service 1. "BMW Assist" or "ConnectedDrive"
2. "Concierge"
3. "Start service" A voice connection is established with the BMW Assist Concierge service. Phone numbers and addresses can be transmitted to the vehicle.
Messages Information on messages, refer to page 230.
Roadside Assistance At a glance BMW Roadside Assistance* can be contacted if assistance is needed in the event of a break‐ down. Roadside Assistance* can also be contacted via a Check Control message, refer to page 76. Starting Roadside Assistance without BMW Assist or TeleService 1. "BMW Assist" or "ConnectedDrive" 2. "Roadside Assistance"
The Roadside Assistance number is dis‐ played. If the mobile phone* is paired, a con‐
238
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
nection is established to Roadside Assis‐ tance.
Starting Roadside Assistance with BMW Assist or TeleService General information In vehicles equipped with TeleService, support is first offered by TeleService Diagnosis and then, if necessary, by TeleService Help. 1. "BMW Assist" or "ConnectedDrive" 2. "Roadside Assistance" 3. "Start service"
TeleService Diagnosis* TeleService Diagnosis enables the wireless transmission of detailed vehicle data that are important for vehicle diagnosis. These data are transmitted automatically. After the data are transmitted, the voice con‐ nection to Roadside Assistance is re-estab‐ lished. TeleService Help* TeleService Help enables an in-depth diagnosis of the vehicle by Roadside Assistance via wire‐ less transmission.
TeleService Help can be started after a prompt by Roadside Assistance and the termination of the voice connection.
Starting TeleService Help 1. Park the vehicle in a safe place. 2. Set the parking brake. 3. The ignition is switched on. 4. "TeleService Help" After completion of TeleService Help, a voice connection is established to Roadside Assis‐ tance.
BMW Online* At a glance A business search can be opened via BMW On‐ line. License conditions This product contains NetFront Browser soft‐ ware of ACCESS Co., Ltd. Copyright © 2007
ACCESS Co., Ltd. All rights reserved. NetFront is a trademark or registered trademark of ACCESS CO., LTD., in Japan and other coun‐ tries. This software is based in part on the work of the Independent JPEG Group. Requirements ▷ Subscription to the optional ConveniencePlan.
▷ The date setting on the Control Display is
current.
▷ The vehicle is located within wireless net‐
work coverage.
Starting BMW Online 1. "BMW Assist" or "ConnectedDrive"
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
239
e
2. "BMW Online"
If necessary, "OK".
3. The BMW Online home page is displayed. Operating BMW Online To start a search: ▷ Turn the controller to highlight an element. ▷ Press the controller to display an element. Opening the start page 1. Open "Options". 2. "Display start page"
Loading a new page 1. Open "Options". 2. "Reload" Cancel 1. Open "Options". 2. "Cancel loading"
Customer Relations At a glance Contact Customer Relations for information on all aspects of your vehicle. Calling Customer Relations Vehicle not equipped with BMW Assist or TeleService 1. "BMW Assist" or "ConnectedDrive" 2. "Customer Relations" The Customer Relations phone number is dis‐ played. If the mobile phone* is paired, a con‐ nection is established to Customer Relations.
Vehicle equipped with BMW Assist or TeleService 1. "BMW Assist" or "ConnectedDrive" 2. "Customer Relations" 3. "Start service"
Service Request* At a glance Sends information to your service partner to re‐ quest the arrangement of a service appoint‐ ment. The TeleService data is transmitted dur‐ ing a Service Request. If possible, your service partner will establish contact with you. Starting a Service Request 1. "BMW Assist" or "ConnectedDrive" 2. "Service Request"
240
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
3. "Start service"
3. "Available services"
A Service Request can be started via a Check Control message, refer to page 76.
Automatic Service Request* The TeleService data necessary for servicing the vehicle are automatically sent to your service partner prior to the service deadline. If possible, the service partner will contact you and a service appointment can be arranged. To check when your service partner was noti‐ fied: 1. "Vehicle Info" 2. "Vehicle status"
3. Open "Options". 4. "Last Service Request"
Services status* Displaying available services Display of all services available in the vehicle. 1. "BMW Assist" or "ConnectedDrive" 2. "Service Status"
Updating BMW Assist Manual update of TeleService* and BMW As‐ sist*. 1. "BMW Assist" or "ConnectedDrive" 2. "Service Status" 3. "Update BMW Assist"
Data transfer* During the updating of BMW services, display the status of the data transfer. 1. "BMW Assist" or "ConnectedDrive" 2. Open "Options". 3. "Data transfer"
Apps* At a glance Certain software applications of a suitable cell phone can be integrated in the vehicle. These software applications are displayed on the Con‐ trol Display. They are operated via iDrive. Requirements ▷ The mobile phone is suitable. ▷ The mobile phone operating system sup‐ ports the software applications of Apps. ▷ Software applications are installed on the
cell phone and ready to use.
▷ Corresponding mobile wireless contract.
241
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Press button to switch within the cell phone functions to a higher level or back. Press button twice to switch back to the main menu.
Notes ▷ The ranges of Apps that can be displayed on the Control Display depend on the range of installed software applications on the mo‐ bile phone.
▷ The data transmission of the software ap‐ plications from the cell phone to the vehicle can last some time. Some software applica‐ tions depend on the speed of the available Internet connection of the cell phone.
▷ Some mobile phones cannot simultane‐ ously use Apps and the Bluetooth hands- free system. If necessary, restart the software application on the cell phone after a phone conversa‐ tion.
Any additionally incurred costs are not a part of Apps.
▷ Use only BMW approved software applica‐ tions; otherwise, it may result in malfunc‐ tions.
Information about suitable cell phones, available software applications and their installation can be found at www.bmw.com/connectivity or at the service center.
Create the entries. Make entries only when traffic and road conditions allow. Otherwise, the vehicle occu‐ pants and other road users may be put in danger because of the distraction from driving. For reasons of safety, some software applica‐ tions are usable only while the vehicle is station‐ ary.◀
Operating Apps 1. Connect the cell phone via the snap-in adapter or via the USB audio interface.
2. "ConnectedDrive" 3. Select the desired software application. Displaying status Information about the currently available soft‐ ware applications can be displayed. 1. "ConnectedDrive" 2. "BMW apps" PlugIn* Selected functions of the cell phone are dis‐ played on the Control Display. They can be op‐ erated via iDrive. 1. Connect cell phone via the snap-in adapter. 2. "ConnectedDrive" 3. "PlugIn" 4. "Activate PlugIn" 5. Navigate to the displayed functions via the controller and select, for example, a desired category or track.
242
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
243
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Mobility
In order to always ensure your mobility, you will find important information on operating fluids, wheels and tires, maintenance and Roadside Assistance in the following.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
g
Refueling Notes
Switch off the engine before refueling Always switch off the engine before refu‐
eling; otherwise, fuel cannot be added to the tank and a message will be displayed.◀
Observe when handling fuel ▷ Take all precautionary measures and
observe all applicable regulations when handling fuel.
▷ Do not carry any spare fuel containers in your vehicle. They can develop a leak and cause an explosion or cause a fire in the event of an accident.◀
Fuel cap Opening 1. Briefly press the rear edge of the fuel filler
flap.
Do not pinch the retaining strap Do not pinch the retaining strap attached to the cap; otherwise, the cap cannot be closed properly and fuel vapors can escape.◀ A message* is displayed if the cap is loose or missing. Manually unlocking fuel filler flap In the event of a malfunction, the fuel filler flap can be released manually: 1. Open the right-hand side panel in the cargo
area.
2. Pull the knob with the gas pump symbol.
2. Turn the fuel cap counterclockwise. 3. Place the fuel cap in the bracket attached to
the fuel filler flap.
Closing 1. Fit the fuel cap and turn it clockwise until you
clearly hear a click.
2. Close the fuel filler flap.
Observe the following when refueling When refueling, insert the filler nozzle com‐ pletely into the filler pipe. Lifting up the fuel pump nozzle during refueling causes: ▷ Premature pump shutoff. ▷ Reduced efficiency in the fuel-vapor recov‐
ery system.
The fuel tank is full when the filler nozzle clicks off the first time.
Handling fuels Follow the safety instructions provided at gas stations; otherwise, there is a danger of per‐ sonal injury and property damage.◀
246
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Fuel tank capacity Approx. 22.5 US gallons/85 liters, including the reserve capacity of approx. 2.1 US gallons/8 li‐ ters. X5 xDrive50i/X6 xDrive50i: reserve capacity of approx. 3.2 gallons/12 liters.
Refuel promptly At the latest, refuel when the range drops below 30 miles/50 km; otherwise, engine func‐ tions are not ensured and damage may occur.◀
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
247
