Login- Download PDF Manual
-
Many DVDs offer dialogs and subtitles in various languages or scene descriptions for the hearing impaired. These functions are stored on the DVD. With some DVDs, it is only possible to select language, subtitles, camera angle, or title by us‐ ing the DVD-specific menu. Consult the infor‐ mation accompanying your DVD. Opening the DVD-specific menu Additional functions may be available on DVDs. It is thus possible, for example, to select from among several possible actions or to access in‐ formation about the film. 1.
Press the button on the remote control
during playback. 2. Select "Menu". 3.
Press the button.
On some DVDs, you can use "Main menu" and "Title" to access additional menus in which you can select music scenes, for ex‐ ample.
To make a selection: 1. 2.
tion is selected.
Select the symbol.
Press the button until the desired func‐
arrow. Press the button.
arrow. Press the button.
3. Select the 4. To return to the start menu: 1. Select the 2. You can also select language, subtitles, camera angle, or title in the DVD-specific menu. Consult the information accompanying your DVD. Compressed video files Playback 1. Select the directory if necessary.
Press the button.
2. 3. Select a track.
4.
Press the button.
205
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
r
5. Select "Play". 6. Press the button. To change the directory: 1. Select the directory.
To play back audio tracks from a DVD, refer to Compressed audio files, refer to page 207. To start playback if a CD is already in the drive: 1. Open the start menu with the remote con‐
trol.
2. Select "CD". 3.
Press the button.
2. Press the button. Playback functions 1. Select a track. Press the button. 2. 3. Select a menu item:
▷ "Pause": stop and continue playback. ▷ "Repeat track": repeat the selected
track.
▷ "Repeat directory": repeat the tracks in
the current directory. Press the button.
4.
Playing audio tracks from CD/ DVD Starting playback Push the CD/DVD into the drive with the labeled side facing upward. The CD/DVD is automati‐ cally pulled in. ▷ Playback begins automatically after a few
seconds.
▷ Otherwise: select "CD".
Press the button.
CDs/DVDs with compressed audio files, refer to page 207, can take approx. 1 minute to read, depending on their directory structure.
As an alternative, you can also control the play‐ back with the buttons on the CD/DVD player. To eject CD/DVD:
Press the button on the CD/DVD player. Selecting a track Buttons on CD/DVD player
Press the button for the corresponding direction repeatedly until you reach the desired track. Playback begins at the start of the track. Using the remote control
Press the button for the corresponding
direction repeatedly or turn the thumbwheel un‐ til you reach the desired track. Playback begins at the start of the track.
206
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Settings and playback functions for audio CDs 1. Select "SET". 2.
Press the button.
Compressed audio files Playback 1. Select the directory if necessary.
3. Make the settings with the remote control: ▷ "Tone":
▷ "Treble / Bass" and "Balance": sepa‐ rately adjustable for the left and right headphones and the infrared head‐ phones.
▷ "Reset": the settings are reset to the de‐
fault values.
▷ "Pause": stop and continue playback. ▷ "Random": the CD tracks are played back
once in random sequence.
▷ "Scan": brief samples of all CD tracks are
automatically played one after another.
▷ "Repeat": repeat the current track. Select
again to end.
To exit from the menu:
Press the buttons on the remote control.
Fast forward/reverse Buttons on the CD/DVD player:
Press the button.
2. 3. Select a track.
Press the button.
4. 5. Select "Play". 6. Press the button. To change the directory: 1. Select the directory.
Press and hold the button for the cor‐
responding direction.
Press the button.
2. Settings and playback functions for compressed audio files 1. Select a track.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
207
r
Press the button.
2. 3. Make the settings with the remote control: ▷ "Tone":
▷ "Treble / Bass" and "Balance": sepa‐ rately adjustable for the left and right headphones and the infrared head‐ phones.
▷ "Reset": the settings are reset to the de‐
fault values.
▷ "Pause": stop and continue playback. ▷ "Scan directory": briefly sample the tracks
in the current directory.
▷ "Scan all": briefly sample all tracks. ▷ "Random directory": play the tracks in the
current directory in a random sequence.
▷ "Random all": play all tracks in a random se‐
quence.
▷ "Repeat track": repeat the selected track. ▷ "Repeat directory": repeat the tracks in the
current directory.
▷ "Details": display any stored information on
the current track. To exit from the menu:
Press the buttons on the remote control.
Displaying images from CD/ DVD 1. Push the CD/DVD into the drive with the la‐
beled side facing upward. The CD/DVD is automatically pulled in.
2. Open the start menu with the remote con‐
trol.
3. Select "Photo". Press the button. 4. Displaying overview 1. Select the subdirectory if necessary.
2. Select "Overview".
Press the button.
3. It may take some time until the overview is com‐ pletely displayed. If a symbol appears instead of an image, the im‐ age cannot be displayed in the overview. Displaying images 1. Use the buttons or the thumbwheel of the
remote control to select an image.
2.
Press the button.
3. Displaying images:
▷ Scroll using the menu navigation but‐
tons of the remote control.
▷ Display the slide show: turn the thumb‐ wheel to set the display duration of the images. Stop the slide show: select "Stop".
208
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Adjusting 1.
Press the button.
2. Select a menu item:
Symbol
"SET"
Function Return to the photo menu. Adjust the "Display". "Language": after switching to the top window, the system lan‐ guage can be changed. Start the slide show. Display the first/last image of the current directory. Rotate the image by 90°.
"Overview" Change to the image overview.
Press the button. Select the symbol. Press the button.
Ending display 1. 2. 3. Eject CD/DVD Press the button on the CD/DVD player.
Information on CD/DVD player Safety notes
Do not remove the cover The BMW CD/DVD player is a Class 1 laser product. Do not operate if the cover is damaged; otherwise, severe eye damage can result.◀
Suitable media
Use of CDs/DVDs ▷ Do not use self-recorded CDs/DVDs with labels applied, as these can be‐ come detached during playback due to heat buildup and can cause irrepar‐ able damage to the device.
▷ Only use round CDs/DVDs with a standard
diameter of 4.7 in/12 cm and do not play CDs/DVDs with an adapter, e.g., single CDs; otherwise, the CDs or the adapter may jam and no longer eject.
▷ Do not use combined CDs/DVDs, e.g., DVD Plus, as the CDs/DVDs can jam and will no longer eject.◀
The CD/DVD player can play the following me‐ dia: ▷ Video DVD. ▷ CD-DA (audio CD). ▷ CDs/DVDs with compressed image data. ▷ CDs/DVDs with compressed audio data. ▷ CDs/DVDs with compressed video data. The DVD player does not support DVD audio. However, many audio DVDs available in stores also contain a video track in the DVD Video for‐ mat in addition to the audio track. These DVDs can be played back by the DVD player. Refer to the information on your DVD to determine whether your audio DVD contains an additional video track. Depending on the authoring used, it is possible that not all functions are available during playback. Dual-sided DVDs available from retail suppliers are coated on both sides and bear no markings. This means both sides are information carriers.
209
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
r
To play the information on the other side, turn over the DVD. Supported formats Depending on the compression method used, not all files of the specified formats can be opened. Images ▷ JPEG/JPG. With very large image files, it can take longer for the images to be displayed. Compressed audio files ▷ MP3. ▷ WMA. ▷ OGG. ▷ AAC. Compressed video files ▷ SVCD. ▷ MPEG1. ▷ MPEG2. ▷ MPEG4/DivX. Digital Rights Management (DRM) In some cases, it may not be possible to play CDs/DVDs with integrated Digital Rights Man‐ agement (DRM). General malfunctions ▷ CD/DVD changers and players have been optimized for performance in vehicles. In some instances they may be more sensitive to faulty CDs/DVDs than stationary devices would be.
▷ If a CD/DVD cannot be played, first check
whether it has been inserted correctly.
Foreign bodies/liquids in the CD/DVD slot Make sure that no foreign objects or liq‐ uids get into the CD/DVD slot; otherwise, the CD/DVD player will be damaged.◀
Humidity High levels of humidity can lead to condensation on the CD/DVD or the laser's scan lens, and temporarily prevent playback. Malfunctions involving individual CDs/ DVDs If malfunctions occur only with particular CDs/ DVDs, this can be due to one of the following causes. Copied or self-recorded CDs/DVDs ▷ Possible reasons for malfunctions with
home-recorded CDs/DVDs are inconsistent data creation or recording processes, or poor quality or old age of the blank CD/DVD. ▷ Only label CDs/DVDs on the upper side with
a pen intended for this purpose.
Damaged CDs/DVDs ▷ Avoid fingerprints, dust, scratches and
moisture.
▷ Store CDs/DVDs in a sleeve. ▷ Do not subject CDs/DVDs to temperatures over 122 ℉/50 ℃, high humidity or direct sunlight.
CDs/DVDs with copy protection CDs/DVDs are often provided with a copy pro‐ tection feature by the manufacturer. As a result, some CDs/DVDs cannot be played, can only be played to a limited degree, or cause the system to switch off. In this case, wait a short while and then switch the system back on again. Then re‐ move the CD/DVD from the drive. CDs/DVDs with compressed audio files If the language set for the CD/DVD player does not match the language of the music track, the music tracks may be displayed incorrectly.
210
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
External device Connecting
Settings for external devices 1.
Press the button during playback.
1 Connections for audio/video cables. Watch the colors of the sockets when connecting. Yellow socket: video White socket: audio on left Red socket: audio on right
2 Power supply for external device: socket
with removable cap.
Playback 1. Switch on the external device and start the
playback.
2. Open the start menu with the remote con‐
trol.
3. Select "AUX". 4.
Press the button.
For devices without a video signal, for instance MP3 players, "No video signal" appears on the display. The sound is nevertheless played.
2. Make the settings with the remote control: ▷ "Video settings":
▷ "Brightness", "Color", and "Contrast" of
the video playback.
▷ "NTSC color": the color can be adjusted
on an external device with the NTSC standard.
▷ "Standard": the DVD system can be
adapted to external devices with differ‐ ent TV standards; to do so, consult the operating manual of the external device.
▷ "Reset": The settings are reset to the
default values.
▷ "Tone":
▷ "Treble / Bass" and "Balance": sepa‐ rately adjustable for the left and right headphones and the infrared head‐ phones.
▷ "Reset": your settings are reset. ▷ After switching to the top window, you
can change other settings. "Audio": adjust the volume of the exter‐ nal device to the volume of the CD/DVD player. "Language": the system language of the DVD system. "Display": background brightness of the screen.
▷ "Video Format": ▷ "Standard" ▷ "Zoom": full-screen playback.
To exit from the menu:
211
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Press the buttons on the remote control.
212
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
213
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Communication
All of the options available to you for mobile communication with family, friends, business partners, and service providers are described in this chapter.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
e
Telephone* At a glance The concept Mobile phones or other external devices such as audio players can be connected to the vehicle via Bluetooth. Bluetooth® is a registered trademark of Blue‐ tooth® SIG, Inc. After these devices are paired once, they are recognized automatically when the ignition is switched on as soon as they are in the vehicle and can then be operated via iDrive, the buttons on the steering wheel, and via voice activation*. Depending on their functionality, external devi‐ ces can be used via the vehicle as a telephone or as an audio source. The telephone functions are described in the following. Operating the au‐ dio functions, refer to page 196. Up to four external devices can be paired. Certain functions may need to be enabled by the mobile phone provider or service provider. Using the mobile phone while driving Make entries only when traffic and road
conditions allow. Do not hold the mobile phone in your hand while you are driving; use the hands-free system instead. If you do not ob‐ serve this precaution, you can endanger the ve‐ hicle occupants and other road users.◀
Snap-in adapter* The snap-in adapter is used to: ▷ Hold the mobile phone. ▷ Recharge the battery. ▷ Connect the mobile phone to an outside an‐
tenna of the vehicle. This provides for better network reception and consistent sound quality.
Approved mobile phones Details on which mobile phones and external devices with a Bluetooth interface are sup‐
216
ported by the mobile phone preparation pack‐ age can be obtained at www.bmwusa.com/blue‐ tooth. Displaying the vehicle identification number and software part number The vehicle identification number and software part number are needed to determine which mo‐ bile phones are supported by the mobile phone preparation package. The software version of the mobile phone may also be required. 1. "Telephone" 2. Open "Options". 3. "Bluetooth® info" 4. "Display system information" These approved mobile phones with a certain software version, support the vehicle functions described below. Malfunctions may occur with other mobile phones or software versions. Do not operate a mobile phone that is connected to the vehicle on the mobile phone keypad, as this may lead to a malfunction. A software update, refer to page 199, can be performed if necessary.
Pairing/unpairing the mobile phone General information The following functions are available: ▷ Use of a mobile phone as a telephone. ▷ Use of a mobile phone as an additional tele‐
phone.
▷ Use of a mobile phone as an audio source. ▷ Use of an audio device as an audio source,
refer to page 196.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Requirements ▷ The mobile phone is suitable, refer to
page 216.
▷ The mobile phone is ready for operation. ▷ Bluetooth is activated in the vehicle and on
the mobile phone.
▷ Bluetooth presettings may need to be made on the mobile phone, e.g., for a connection without confirmation or visibility, refer to the mobile phone operating instructions.
▷ Deactivate Bluetooth audio if necessary. ▷ A number with at least four and a maximum
of 16 digits was defined as the Bluetooth passkey. It is only required once for pairing.
▷ The ignition is switched on. Activating/deactivating Bluetooth Bluetooth is not permitted everywhere. Comply with all safety guidelines and regulations. 1. "Telephone" 2. Open "Options". 3. "Bluetooth®"
Additional functions Activating/deactivating the additional functions Activate the functions before pairing to be able to use them in the vehicle. Information on suit‐ able mobile phones, refer to page 216, that sup‐ port this function. 1. "Telephone" 2. "Bluetooth® (phone)"
3. Open "Options". 4. Select the desired additional function.
▷ "Additional telephone" ▷ "Office" ▷ "Bluetooth® audio"
An additional function cannot be assigned to a telephone while it is deactivated. Additional telephone* A mobile phone can be used as an additional telephone. The additional telephone can be used to accept incoming calls, refer to page 220. While a call is active on the additional telephone, received calls are displayed on the Control Display. Audio source A mobile phone can be used as an audio source. Pairing and connecting a device
Pairing a device To avoid becoming distracted and posing an unnecessary hazard both to your own vehi‐ cle's occupants and to other road users, only pair the device while the vehicle is stationary.◀ 1. "Telephone" 2. "Bluetooth® (phone)" 3. "Add new phone"
The Bluetooth name of the vehicle is dis‐ played.
4. To perform additional steps on the mobile phone, refer to the mobile phone operating instructions: for instance, search for or con‐ nect the Bluetooth device or a new device.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
217
e
The Bluetooth name of the vehicle appears on the mobile phone display.
5. Select the Bluetooth name of the vehicle on
the mobile phone display. You are prompted by the iDrive or mobile phone to enter the same Bluetooth passkey.
6. Enter the passkey and confirm.
7. Select the functions for which the mobile
phone is to be used.
8. "OK" If the pairing was successful, the mobile phone appears at the top of the list of mobile phones. The functions supported by the mobile phone and audio device are displayed as symbols when paired. White symbol: the function is active. Gray symbol: the function is inactive. Symbol
Function Telephone. Additional telephone. Audio source.
Four devices can be paired with the vehicle at once. Three devices can be connected with the vehicle at once. If pairing was unsuccessful: What to do if..., refer to page 219. Following the initial pairing ▷ The mobile phone is detected/connected in
the vehicle within a short period of time when the engine is running or the ignition is switched on.
▷ The phone book entries of the telephone
stored on the SIM card* or mobile phone are transmitted to the vehicle after detection, depending on the mobile phone.
▷ Four devices can be paired. ▷ Specific settings may be necessary in some mobile phones, e.g., authorization or a se‐ cure connection; refer to the mobile phone operating instructions.
Connecting a specific device If more than one device is detected by the vehi‐ cle, the device at the top of the list is connected. A different device can be connected by select‐ ing it. 1. "Telephone" 2. "Bluetooth® (phone)" 3. Select the device that is to be connected.
The functions that were assigned to the device before unpairing are assigned to the device when it is reconnected. If the device is already connected, these functions are deactivated. Configuring the devices Additional functions can be activated or deacti‐ vated for paired and connected devices. 1. "Telephone" 2. "Bluetooth® (phone)" 3. Highlight the device to be configured. 4. Open "Options". 5. "Configure phone" 6. At least one function must be selected.
▷ "Telephone" ▷ "Additional telephone"
218
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
▷ "Audio"
7. "OK" If a function has already been assigned to an‐ other connected device, the function is deacti‐ vated in that device and the device is unpaired when the function is assigned to a new device. Swapping the telephone and additional telephone The function of the telephone and additional tel‐ ephone can be swapped automatically. 1. "Telephone" 2. "Bluetooth® (phone)" 3. "Swap phone/addit. phone" Unpairing a device 1. "Telephone" 2. "Bluetooth® (phone)" 3. Highlight the device that is to be unpaired. 4. Open "Options". 5. "Remove phone from list"
What to do if... Information on suitable mobile phones, refer to page 216. The mobile phone could not be paired or con‐ nected. ▷ Is Bluetooth activated in the vehicle and on
the mobile phone? Activate Bluetooth on the vehicle and on the mobile phone.
▷ Do the Bluetooth passkeys on the mobile phone and the vehicle match? Enter the same passkey on the mobile phone and via iDrive.
▷ Did it take longer than 30 seconds to enter the passkey? Repeat the pairing procedure. ▷ Are too many Bluetooth devices connected to the mobile phone or vehicle? Delete con‐ nections with other devices if necessary. ▷ Is the audio connection activated? Deacti‐
vate the audio connection.
▷ Is the mobile phone in power-save mode or does it have only a limited remaining battery life? Charge the mobile phone in the snap- in adapter* or via the charging cable.
▷ Depending on the mobile phone, it is possi‐ ble that only one device can be connected to the vehicle. Unpair the connected device from the vehicle and pair and connect only one device.
▷ The mobile phone no longer reacts? Switch the mobile phone off and on again. Repeat the pairing procedure.
The telephone functions are not available. ▷ Is the mobile phone paired as an additional telephone and is the additional telephone function deactivated? Activate the function.
▷ Is an outgoing call not possible? Connect
the mobile phone as a telephone.
No phone book entries or only some phone book entries are displayed, or they are incomplete. ▷ Transmission of the phone book entries is
not yet complete.
▷ It is possible that only the phone book en‐ tries of the mobile phone or the SIM card* are transmitted.
▷ It may not be possible to display phone book
entries with special characters.
▷ The number of phone book entries to be
stored is too high.
▷ Is the data volume of the contact too large,
e. g., due to stored information such as notes? Reduce the data volume of the con‐ tact.
▷ Is the mobile phone connected as an audio source or additional telephone? The mobile phone must be connected as a telephone.
The phone connection quality is poor.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
219
e
▷ The strength of the Bluetooth signal on the mobile phone can be adjusted, depending on the mobile phone.
▷ Insert the mobile phone into the snap-in
adapter* or place it in the area of the center console.
▷ Adjust the volume of the microphone and
loudspeakers separately.
If all points in this list have been checked and the required function is still not available, please contact the hotline or service center.
Controls Adjusting the volume
Turn the knob until the desired volume is se‐ lected. The setting is stored for the remote con‐ trol currently in use. The vehicle automatically adjusts the volume of the microphone on the telephone and the vol‐ ume of the called party. Depending on the mo‐ bile phone, the volumes may need to be ad‐ justed. The settings can only be created during a call and must be adjusted separately for each telephone. The settings are deleted when the telephone is unpaired. 1. "Settings" 2. "Tone" 3. "Volume settings" 4. Select the desired setting: "Microphone" or
"Loudspeak."
5. To adjust: turn the controller. 6. To store: press the controller.
Incoming call Receiving calls If the number of the caller is stored in the phone book and is transmitted by the network, the name of the contact is displayed. Otherwise, only the phone number is displayed. If more than one phone number is assigned to a contact, only the name of the contact is dis‐ played. For calls on the additional telephone, the num‐ ber is only displayed if it is transmitted by the network. An incoming call to the additional telephone is automatically rejected if there is an active call on the other telephone. Accepting a call
Press the button on the steering wheel.
or
"Accept"
Rejecting a call
"Reject"
Ending a call
Press the button on the steering wheel.
or 1. "Telephone" 2. "Active calls"
220
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
3.
"End call"
Entering a phone number Dialing a number 1. "Telephone" 2. "Dial number" 3. Select the digits individually. 4.
Select the symbol.
The phone number can also be entered by voice. Calls with multiple participants General information You can switch between calls or connect two calls to a single conference call. These functions must be supported by the mobile phone and service provider. Accepting a call while speaking to another party This function might have to be activated by the service provider and the mobile phone must be adjusted accordingly. If a second call comes in during an ongoing call, a call waiting signal is sounded.
"Accept"
The call is accepted and the existing call is put on hold. Establishing a second call Establish an additional call during an active call. 1. "Telephone" 2. "Active calls" 3.
"Hold"
The existing call is put on hold.
4. Dial the new phone number or select it from
a list. "Return"
The call on hold is resumed. Switching between two calls, hold call The active call is displayed in color. The call on hold is displayed in gray.
"Swap calls"
"Conference call"
The call on hold is resumed. Establishing a conference call Two calls can be connected to a single tele‐ phone conference call. 1. Establish two calls. 2. When terminating a conference call, both calls are ended. If one call is terminated by another party, the other call can be continued. Switching the microphone to mute When a call is active, the microphone can be muted. 1. "Telephone"
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
221
e
"Microphone mute"
2. "Active calls" 3. A microphone that has been switched to mute is automatically reactivated: ▷ When a new connection is established. ▷ When switching between call parties. DTMF suffix dialing DTMF suffix dialing can be used for gaining ac‐ cess to network services or for controlling devi‐ ces, e.g., to make a remote inquiry of an answer‐ ing machine. The DTMF code is needed for this purpose. 1. "Telephone" 2. Select the contact from a list or "Dial
number". "Keypad dialing"
3. 4. Enter the DTMF code via iDrive. Phone book Displays The phone book accesses the contacts and shows all contacts for which a phone number has been stored. The entries can be selected to make a call. 1. "Telephone" 2. "Phone book" A symbol indicates the storage location of the contacts.
Calling a contact
Symbol Meaning
Contact with one stored phone num‐ ber. Contact with more than one stored phone number. Call not possible; mobile phone with‐ out reception or network, or Service Request* is active.
For contacts with one stored phone number: se‐ lect the required contact. The connection is be‐ ing established. For contacts with more than one stored phone number: select the required contact and the phone number. The connection is being estab‐ lished. Editing a contact Changing the entries in "Contacts". When a contact is changed, the changes are not stored on the mobile phone. A copy of the entry is stored in the vehicle. 1. Highlight the contact. 2. Open "Options". 3. "Edit entry" The contact can be edited. Redialing General information The list of dialed numbers in the mobile phone is transmitted to the vehicle depending on the mobile phone. Possibly only those numbers are displayed that were dialed from the vehicle. The 20 phone numbers dialed last are displayed. The sorting order of the phone numbers de‐ pends on the particular mobile phone. Dialing the number via the iDrive 1. "Telephone"
222
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
2. "Redial"
3. Select the desired entry and the phone num‐
ber if necessary.
The connection is established. Saving an entry in the contacts 1. Highlight the entry. 2. Open "Options". 3. "Store as new contact" or "Add to existing
contact" 4. Select 5. Select the type of number: "Home",
"New phone number" or contact.
If necessary, "Store contact in vehicle".
"Business", "Mobile", or "Other" 6. Complete the entries if necessary. 7. Received calls Displaying calls The 20 calls that were last received are dis‐ played. 1. "Telephone" 2. "Received calls"
The connection is established. Saving an entry in the contacts 1. Highlight the entry. 2. Open "Options". 3. "Store as new contact" or "Add to existing
contact" 4. Select 5. Select the type of number: "Home",
"New phone number" or contact.
If necessary, "Store contact in vehicle".
"Business", "Mobile", or "Other" 6. Complete the entries if necessary. 7. Hands-free system General information Calls that are being made on the hands-free system can be continued on the mobile phone and vice versa. From the mobile phone to the hands- free system Calls that were begun outside of the Bluetooth range of the vehicle can be continued on the hands-free system with the ignition switched on. Depending on the mobile phone, the system au‐ tomatically switches to the hands-free system. If the system does not switch over automatically, follow the instructions on the mobile phone dis‐ play; refer also to the mobile phone operating instructions. From the hands-free system to the mobile phone Calls that are made on the hands-free system can in some cases be continued on the mobile phone; this depends on the mobile phone. Follow the instructions on the mobile phone dis‐ play; refer also to the mobile phone operating instructions.
Calling a number from the list Selecting an entry.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
223
e
Voice operation* Vehicles equipped with the voice activation sys‐ tem: operation, refer to page 24. Vehicles not equipped with the voice activation system: depending on the equipment, the mo‐ bile phone can be voice operated as described below. The list of short commands in the operating manual does not apply to this type of voice op‐ eration. The concept ▷ The mobile phone can be operated without taking your hands from the steering wheel. ▷ In many cases, the entries are accompanied
by announcements or questions.
▷ ›...‹ Verbal instructions for voice operation. Using voice activation Activating the voice activation system
1.
Briefly press the button on the
steering wheel.
2. Say the command. Terminating the voice activation system
Briefly press the button on the steering wheel or ›Cancel‹.
Possible commands Having possible commands read aloud Briefly press the button on the steering wheel. ›Help‹.
Possible commands are announced. The digits from zero to nine are recognized. The digits can be spoken separately or combined in a sequence to accelerate the entry. Using alternative commands The system often recognizes a number of dif‐ ferent commands to run a function; for instance:
›Dial name‹ or ›Name‹ Example: dialing a phone number
1.
2.
Briefly press the button on the
steering wheel. ›Dial number‹ The system says: »Please say the number«.
3. For instance, ›123 456 790‹
The system says: »123 456 790. Continue? «. ›Dial‹ The system says: »Dialing number«.
4.
›Dial‹
›Dial number‹
Calling Dialing a phone number 1. 2. Say the phone number. 3. Correcting the phone number The sequence of digits can be deleted after the system has repeated the digits. ›Correct number‹ The command can be repeated as often as nec‐ essary. Deleting a phone number ›Delete‹ All digits entered up to that point are deleted. Redialing ›Redial‹ Voice phone book* Depending on how your vehicle is equipped, it may be necessary to create your own voice phone book. The entries must be entered using voice activa‐ tion and are separate from the memory in the mobile phone. Up to 50 entries can be set up.
224
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Saving an entry 1. 2. Say the name. Do not exceed the speaking
›Save name‹
duration of approx. 2 seconds.
3. Say the phone number after being prompted
to do so by the system. ›Save‹
›Delete name‹
4. Deleting an entry 1. 2. Say the name after being prompted to do so. 3. Confirm the query with ›Yes‹. Deleting all entries ›Delete phone book‹ 1. The dialog for deleting the phone book is opened.
2. Confirm the query with ›Yes‹. 3. Confirm the query again with ›Yes‹. Reading and selecting entries 1.
›Read phone book‹ The dialog for reading the phone book is opened.
2. Say ›Dial number‹ when the desired entry is
read.
›Dial name‹
Selecting an entry 1. 2. Say the name after being prompted to do so. 3. Confirm the query with ›Yes‹. Adjusting the volume
▷ The volume remains constant even if the volume of other audio sources is changed. ▷ The volume is stored for the remote control
currently in use.
Notes Do not use the voice activation system to initiate an Emergency Request. In stressful situations, the voice and vocal pitch can change. This can unnecessarily delay the establishment of a tel‐ ephone connection. Instead, use the SOS button*, refer to page 280, in the vicinity of the interior mirror. Environmental conditions ▷ Say the commands, numbers, and letters smoothly and with normal volume, empha‐ sis, and speed.
▷ Always say commands in the language of the system. The language for the mobile phone voice operation is preset and cannot be changed in the Control Display.
▷ Keep the doors, windows, and glass sun‐ roof* closed to prevent noise interference.
▷ Avoid making other noise in the vehicle
while speaking.
Snap-in adapter* Installation position In the center armrest. Inserting/removing the snap-in adapter 1. Press button 1 and remove the cover.
Turn the knob during an announcement.
