Login- Download PDF Manual
-
by symbols.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
165
▷ The traffic bulletins for the surrounding area
are stored in a list.
The symbol in the function bar of the map
view turns red if there are traffic bulletins that affect the calculated route. Switching the reception on/off 1. "Navigation" 2. Open "Options". 3. "Receive Traffic Info" Opening the list of traffic bulletins 1. "Navigation" 2. "Map" 3.
"Traffic Info"
First, traffic bulletins for the calculated route are displayed. The traffic bulletins are sorted by their dis‐ tance from the current position of the vehi‐ cle.
4. Select a traffic bulletin.
"More information": display additional
information.
5. Scroll to the next or previous traffic bulletin
if required.
Traffic bulletins on the map "Traffic conditions/gray map" active: The Control Display changes to a black and white display. This enables a better view of the traffic bulletins. The day/night mode is disre‐ garded in this setting. Symbols and special des‐ tinations are not displayed. 1. "Navigation" 2. "Map" 3. Open "Options". 4. "Settings" 5. "Traffic conditions/gray map" Symbols in the map view Depending on the scale of the map and the lo‐ cation of the traffic obstruction along the route,
the symbols for the traffic obstructions are dis‐ played. Additional information in the map view Depending on the map scale, a traffic obstruc‐ tion's length, direction, and impact are displayed in the map using triangles or gray bars along the calculated route. ▷ Red: traffic congestion ▷ Orange: stop-and-go traffic ▷ Yellow: heavy traffic ▷ Green: clear roads ▷ Gray: general traffic bulletins such as road
construction
The displayed information depends on the par‐ ticular traffic information service. Filtering traffic bulletins You can set which traffic bulletins appear on the map. 1. "Navigation" 2. "Map" 3. Open "Options". 4. "Traffic Info categories" 5. Select the desired category.
Traffic bulletins of the selected category are dis‐ played on the map. ▷ Traffic bulletins that are relevant to the route
are always shown.
▷ For your own safety, traffic bulletins that no‐ tify you of potentially dangerous situations, such as wrong-way drivers, cannot be hid‐ den.
166
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
2. Open "Options". 3. "Dynamic guidance"
Destination guidance with traffic bulletins Semi-dynamic destination guidance When traffic bulletin reception is switched on, semi-dynamic destination guidance is active. The destination guidance system takes the available traffic information into account. A mes‐ sage is displayed depending on the route, the traffic bulletins, and the possible detour routes. A detour is suggested in the event of a traffic obstruction. In addition, distance and time dif‐ ferences between the original route and the de‐ tour are displayed. To accept the detour:
"Detour"
In the event of special hazards, e. g., objects on the road, a message is displayed without a de‐ tour suggestion. Detours can also be accepted if the traffic mes‐ sages are called up in the list. 1. "Navigation" 2. "Map" 3. 4. "Detour information" 5. Dynamic destination guidance The route is automatically changed in the event of traffic obstructions. ▷ The system does not point out traffic ob‐
"Traffic Info"
"Detour"
structions along the original route.
▷ Traffic bulletins continue to be displayed on
the map.
▷ Depending on road type and the kind and extent of the traffic obstruction, the calcu‐ lated route may lead through the traffic ob‐ struction.
▷ Dangerous situations are displayed regard‐
less of the setting.
To activate dynamic destination guidance: 1. "Navigation"
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
167
.
What to do if...
▷ The current transmission position cannot be
displayed? The vehicle is located in an unrecognized region, is in a poor reception area, or the system is currently determining the posi‐ tion. Reception is usually best when you have an unobstructed view of the sky.
▷ The destination without street information is
not used for route guidance? When city has been input, no downtown can be determined. Input any street in the se‐ lected city and start destination guidance. ▷ The destination is not used for route guid‐
ance? The destination data are not contained in the navigation data. Select a destination that is as close as possible to the original.
▷ Letters for destination input cannot be se‐
lected? The stored data do not contain the data of the destination. Select a goal that is as close as possible to the original.
▷ Is the map displayed in shades of gray?
"Traffic conditions/gray map" active: The Control Display changes to a black and white display. This enables a better view of the traffic bulletins.
▷ Spoken instructions are no longer output during route guidance in front of intersec‐ tions? The area has not yet been fully recorded, or you have left the recommended route and the system requires a few seconds to cal‐ culate a new route suggestion.
168
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
169
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Entertainment
This chapter helps assure your enjoyment when receiving radio stations and playing CDs, DVDs, and tracks from the music collection.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
e
Tone General information The sound settings are stored for the remote control currently in use.
Treble, bass, balance, and fader ▷ "Treble": treble adjustment. ▷ "Bass": depth adjustment. ▷ "Balance": left/right volume distribution. ▷ "Fader": front/rear volume distribution. Setting treble, bass, balance, and fader 1. "CD/Multimedia", "Radio" or "Settings" 2. "Tone"
3. Select the desired tone settings.
Adjusting the equalizer 1. "CD/Multimedia", "Radio" or "Settings" 2. "Tone" 3. "Equalizer" 4. Select the desired setting.
5. To adjust: turn the controller. 6. To store: press the controller.
Multi-channel playback, surround* Choose between stereo and multi-channel play‐ back, surround. Setting multi-channel playback, surround 1. "CD/Multimedia", "Radio" or "Settings" 2. "Tone" 3. "Surround"
4. To adjust: turn the controller. 5. To store: press the controller.
Equalizer* Setting for individual audio frequency ranges.
172
When surround is activated, multi-channel play‐ back is simulated when a stereo audio track is played.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Volume ▷ "Speed volume": speed-dependent volume
control.
▷ "PDC": volume of the PDC signal* com‐ pared to the entertainment sound output. ▷ "Gong": volume of the signal, such as the safety belt reminder, compared to the en‐ tertainment sound output.
▷ "Microphone": volume of the microphone*
during a phone call.
▷ "Loudspeak.": volume of the loudspeakers*
during a phone call.
The following volumes are only stored for the respective paired telephone: "Microphone", "Loudspeak.". Adjusting the volume 1. "CD/Multimedia", "Radio" or "Settings" 2. "Tone" 3. "Volume settings" 4. Select the desired volume setting.
5. To adjust: turn the controller. 6. To store: press the controller.
Resetting the tone settings All tone settings can be reset to the default set‐ ting. 1. "CD/Multimedia", "Radio" or "Settings" 2. "Tone" 3. "Reset"
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
173
i
Radio Controls
3. Select the desired station.
1 Volume, on/off 2 Change wave band 3 Change entertainment sources 4 Change station/track 5 Programmable memory buttons
Sound output Switching on/off When the ignition is switched off: press ON/OFF button on the radio. Muting When the ignition is switched on or the engine is running: press the ON/OFF button on the radio.
All saved stations are stored for the remote con‐ trol currently in use. Changing the station Turn the controller and press it or
Press the button
or Press the buttons on the steering wheel, refer to page 12. Storing a station 1. "Radio" 2. "FM" or "AM" 3. Highlight the desired station.
AM/FM station Selecting a station 1. "Radio" 2. "FM" or "AM"
4. Press the controller for an extended period. 5. Select the desired memory location. The stations are stored for the remote control currently in use. The stations can also be stored on the program‐ mable memory buttons, refer to page 22.
174
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Selecting a station manually Station selection via the frequency. 1. "Radio" 2. "FM" or "AM" 3. "Manual" 4. To select the frequency: turn the controller.
To store the station: press the controller for an extended period. RDS* RDS broadcasts additional information, such as the station name, in the FM wave band. When playing a station with multiple frequencies, the system automatically switches to the frequency with the best reception, if needed. Switching the RDS on/off 1. "Radio" 2. "FM" 3. Open "Options". 4. "RDS"
The setting is stored for the remote control cur‐ rently in use.
HD Radio™ reception* Many stations broadcast both analog and digital signals. License conditions HD Radio™ technology manufactured under li‐ cense from iBiquity Digital Corp. U. S. and For‐ eign Patents. HD Radio™ and the HD and HD Radio logos are proprietary trademarks of iBiq‐ uity Digital Corp. Activating/deactivating digital radio reception 1. "Radio" 2. "FM" or "AM" 3. Open "Options". 4. "HD Radio Reception" The setting is stored for the remote control cur‐ rently in use.
This symbol is displayed in the status line
when the audio signal is digital. In areas in which the station is not continuously received in digital mode, the playback switches between analog and digital reception. Due to time delayed broadcasting, there may be repe‐ titions or interruptions. In this case, switch off digital radio reception. Displaying additional information Some stations broadcast additional information on the current track, such as the name of the ar‐ tist. 1. Select the desired station. 2. Open "Options". 3. "Station info" Selecting a substation This symbol indicates that a main station also broadcasts additional substations. The station name of the main station ends in HD1. Station names of the substations end in HD2, HD3, etc. 1. Select the desired station. 2. Press the controller. 3. Select the substation.
175
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
i
When reception is poor, the substation is muted for several seconds. If reception is interrupted for an extended period, it switches back to the main station.
3.
"Category"
Satellite radio* General information The channels are offered in predefined pack‐ ages. The packages must be enabled by tele‐ phone. Navigation bar overview
Symbol
Function
Change the list view. Select the category. Direct channel entry Timeshift Open the My Favorites category/ open a favorite. Manage the favorites. Traffic Jump
The functions of the navigation bar symbols can also be stored on the programmable memory buttons, refer to page 22. Managing a subscription To be able to enable or unsubscribe from the channels, you must have reception. It is usually at its best when you have an unobstructed view of the sky. The channel name is displayed in the status line. Enabling channels The Unsubscribed Channels category contains all disabled channels. 1. "Radio" 2. "Satellite radio"
4. Select the Unsubscribed Channels cate‐
gory.
5. Select the desired channel.
The phone number and an electronic serial number, ESN, are displayed.
6. Select the phone number to have the chan‐
nel enabled.
You can unsubscribe from the channels again via this phone number. Unsubscribing from channels 1. "Radio" 2. "Satellite radio" 3. Open "Options". 4. "Manage subscription"
176
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
5. The phone number and an electronic serial
number, ESN, are displayed.
6. Call Sirius to unsubscribe from the chan‐
nels.
Selecting channels You can only listen to enabled channels. The selected channel is stored for the remote control currently in use. Via the iDrive 1. "Radio" 2. "Satellite radio" 3. Select "All channels" or the desired cate‐
gory.
4. Select the desired channel.
Via the button on the radio
Press the button. The next channel is selected.
Via direct channel entry 1. "Radio" 2. "Satellite radio" 3. "Set channel" 4. Turn the controller until the desired channel
is reached and press the controller.
Storing a channel 1. "Radio" 2. "Satellite radio" 3.
If necessary, open "All channels" or the de‐ sired category.
4. Select the desired channel.
5. Press the controller again. 6. Press the controller again to confirm the
highlighted channel.
7. Select the desired memory location. The channels are stored for the remote control currently in use. The channels can also be stored on the pro‐ grammable memory buttons, refer to page 22. Changing the list view The list view changes every time the first symbol on the navigation bar is pressed. Information on the channel is displayed. Symbol
Meaning Channel name Artist Track
Selecting a category 1. "Radio" 2. "Satellite radio" 3. "Category" 4. Select the desired category. Timeshift Approx. one hour of the program being broad‐ cast on the channel currently being listened to is stored in a buffer. Prerequisite: the signal must be available. The stored audio track can be played with a de‐ lay following the live broadcast. When the buffer is full, the older tracks are overwritten. The buf‐ fer is cleared when a new channel is selected.
177
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
i
Opening the timeshift function 1. "Radio" 2. "Satellite radio" 3.
"Replay - Time shift"
▷ The red arrow shows the current playback
position.
▷ The time difference to the live broadcast is
displayed next to the buffer bar.
▷ For live transmissions "live". Timeshift menu
Symbol Function
Go to the live broadcast
Playback/pause
Next track Previous track Fast forward Reverse
Automatic timeshift deactivated/ac‐
tivated
Automatic timeshift When the function is activated, audio playback is stopped automatically in the event of: ▷ Incoming and outgoing telephone calls. ▷ Activation of the voice activation system. ▷ Muting. The audio playback then continues with a time delay. To activate:
178
1. "Radio" 2. "Satellite radio" 3. 4. To deactivate:
"Replay - Time shift" "Automatic time shift"
"Automatic time shift"
Storing favorites Up to 30 favorites can be stored in the favorites list. Available favorites are artist, track, game, league, and team. Storing the artist, track, or game It is only possible to store favorites that are cur‐ rently being broadcast. The channel information must be available. 1. "Radio" 2. "Satellite radio" 3.
If necessary, open "All channels" or the de‐ sired category.
4. Select the desired channel. 5. Press the controller again. 6. Select the artist, track, or game. Storing the league or team Leagues or teams can be added to the favorites from a selection list. 1. "Radio" 2. "Satellite radio" 3. 4. "Add sports information"
"Manage favorites"
5. Select the league. 6. Select "Add all teams" or the desired team.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Opening the favorites If an activated favorite is played back, the fol‐ lowing message appears for approx. 20 seconds "Favorite alert!". "Favorites"
Select the symbol while the message is shown.
The displayed favorite is played. If there is no message, the system changes to the My Favorites category. All favorites currently being broadcast can be selected from a list. Managing the favorites Activating/deactivating the favorites Favorites can be activated and deactivated globally and individually. 1. "Satellite radio" 2. 3. Select "Activate alert" or the desired favor‐
"Manage favorites"
ites.
"Manage favorites"
The setting is stored for the remote control cur‐ rently in use. Deleting favorites 1. "Satellite radio" 2. 3. Highlight the desired favorite. 4. Open "Options". 5. "Delete entry" Traffic Jump Traffic and weather information for a selected region is broadcast every few minutes.
Selecting a region 1. "Radio" 2. "Satellite radio" 3. Open "Options". 4. "Set jump" 5. Select the desired region. The region is stored for the remote control cur‐ rently in use. Activating/deactivating the jump 1. "Radio" 2. "Satellite radio" 3. "Jump to:" Information for the selected region is broadcast as soon as it is available. A new panel opens. Canceling the Traffic Jump: "Cancel". Symbol Meaning
Information will be broadcast shortly. Information is currently being broad‐ cast.
Select one of the symbols to deactivate Traffic Jump. Automatic update About twice a year, Sirius performs an update of the channel names and positions. The update takes place automatically and may take several minutes. Notes ▷ Reception may not be available in some sit‐ uations, such as under certain environmen‐ tal or topographic conditions. The satellite radio has no influence on this.
▷ The signal may not be available in tunnels or underground garages; next to tall buildings; or near trees, mountains or other powerful sources of radio interference.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
179
i
Stored stations General information It is possible to store up to 40 stations. Calling up a station 1. "Radio" 2. "Presets" 3. Select the desired station. Storing a station The station currently selected is stored. 1. "Radio" 2. "Presets" 3. "Store station"
4. Select the desired memory location. The list of stored stations is stored for the re‐ mote control currently in use. The stations can also be stored on the program‐ mable memory buttons, refer to page 22. Deleting a station 1. "Radio" 2. "Presets" 3. Select the desired station. 4. Open "Options". 5. "Delete entry"
180
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
CD/multimedia Controls
1 Volume, on/off 2 Eject CD/DVD 3 CD/DVD drive 4 Change the entertainment source 5 Change station/track 6 Programmable memory buttons
Sound output Switching on/off When the ignition is switched off: press ON/OFF button on the radio. Muting When the ignition is switched on or the engine is running: press the ON/OFF button on the radio.
CD/DVD Playback Loading the CD/DVD player Insert the CD/DVD with the printed side up. Playback begins automatically. Reading can take a few minutes with com‐ pressed audio files.
Starting playback A CD/DVD is located in the CD/DVD player or in the CD/DVD changer*. 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the desired CD or DVD.
Symbol
...
Meaning CD/DVD player CD/DVD changer* CD/DVD player, rear*
Playable formats ▷ DVD: DVD-ROM, DVD-R, DVD+R, DVD-
RW, DVD+RW, DVD-R DL, DVD+R DL, DVD audio (video part only), DVD video*.
▷ CD: CD-ROM, CD-R, CD-RW, CD-DA,
VCD*, SVCD*.
▷ Compressed audio files: MP3, WMA, AAC*,
M4A*.
Audio playback Selecting the track using the button
Press the button for the appropriate di‐ rection as often as necessary until the
desired track is played back.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
181
i
Selecting the track using the iDrive Audio CDs
Displaying* information on the track
Select the desired track to begin playback.
CDs/DVDs with compressed audio files Depending on the data, some letters and num‐ bers of the CD/DVD may not be displayed cor‐ rectly. 1. Select the directory if necessary.
To change to a higher level directory: move the controller to the left.
If information about a track has been stored, it is displayed automatically: ▷ Interpret. ▷ Album track. ▷ Number of tracks on the CD/DVD. ▷ File name of track. Random playback 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the desired CD or DVD. 4. Open "Options". 5. "Random"
2. Select the desired track to begin playback.
CDs/DVDs with compressed audio files: all tracks within the selected directory are played in random order. Random mode is switched off when the audio source is changed and the ignition is switched off. Fast forward/reverse
Press and hold the button.
182
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Automatic repeat* The selected CDs/DVDs are repeated automat‐ ically. Video playback* Country codes Only DVDs with the code of the home region can be played back; also refer to the information on the DVD. Code Region
USA, Canada Japan, Europe, Middle East, South Af‐ rica Southeast Asia Australia, Central and South America, New Zealand Northwest Asia, North Africa China All regions
Playback The video image is displayed on the Control Dis‐ play up to a speed of approx. 2 mph/3 km/h; in some countries, it is only displayed while the parking brake is set or the automatic transmis‐ sion is in position P.
DVD video 1. "CD/Multimedia" 2. "CD/DVD" 3. Select a DVD with video content.
4.
"DVD menu"
5. Start the DVD via the DVD menu.
"Select track"
VCD/SVCD 1. "CD/Multimedia" 2. "CD/DVD" 3. Select a CD with video content. 4. 5. Select the desired track. Video menu To open the video menu: turn the controller dur‐ ing playback. Press the controller when "Back" is displayed. Symbol
Function Open DVD menu Starting playback Pause Stop Next chapter Previous chapter Fast forward Reverse
In fast forward/reverse: the speed increases ev‐ ery time the controller is pressed. To stop, start playback. DVD menu 1.
If necessary, turn the controller to open the video menu.
183
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
i
2.
"DVD menu"
The DVD menu is displayed. The display de‐ pends on the contents of the DVD.
3. To select menu items: move the controller
and press it.
To change to the video menu: turn the controller and press it. DVD/VCD settings For some DVDs, settings can only be made via the DVD menu; refer also to the information on the DVD.
Selecting the language* The languages that are available depend on the DVD. 1. Turn the controller during playback. 2. Open "Options". 3. "Audio/language"
3. "Subtitles" 4. Select the desired language or "Do not
display subtitles".
Setting the brightness, contrast and color 1. Turn the controller during playback. 2. Open "Options". 3. "Display settings" 4. "Brightness", "Contrast" or "Color"
4. Select the desired language.
Selecting the subtitles* The subtitles that are available depend on the DVD. 1. Turn the controller during playback. 2. Open "Options".
5. Turn the controller until the desired setting
is reached and press the controller.
Selecting the zoom Display the video image on the entire screen. 1. Turn the controller during playback. 2. Open "Options".
184
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
3. "Additional options" 4. "Zoom mode"
CD/DVD changer* In the glove compartment
Selecting a track DVD video: 1. Turn the controller when the DVD menu is
displayed.
The BMW CD/DVD changer for six CDs/DVDs is located in the glove compartment.
Controls and displays
2. Open "Options". 3. "Additional options" 4. "Select title" 5. Select the desired track. VCD/SVCD: 1. 2. Select the desired track.
"Select track"
Selecting the camera angle* The availability of a different camera angle de‐ pends on the DVD and the current DVD track. 1. Turn the controller during playback. 2. Open "Options". 3. "Additional options" 4. "Viewing angle" 5. Select the desired camera angle.
Opening the main menu, back These functions are not contained on every DVD. Therefore, they may not be available for use.
1 Empty CD/DVD compartments 2 LEDs on the CD/DVD slot 3 Buttons for CD/DVD compartments 4 CD/DVD slot 5 Load CD/DVD compartments Loading the CD/DVD compartments individually
1.
Press the button.
The LED on the first empty compartment flashes.
2. Select another compartment if necessary. 3. Wait for the LEDs on the DVD slot to flash. 4.
Insert a single CD or DVD in the middle. The CD/DVD is drawn in automatically and placed into the selected compartment.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
185
i
Sliding in CDs/DVDs Do not insert the CD/DVD until the LEDs on the DVD slot are flashing; otherwise, the CD/ DVD or the CD/DVD changer could be damaged. Do not continue to push on the CD/DVD; this may cause it to jam and prevent it from being able to eject again.◀
Filling all vacant CD/DVD compartments
1.
Press the button for a longer period. The LEDs on the empty CD compartments flash.
2. Wait for the LEDs on the DVD slot to begin flashing and then insert each CD or DVD into the center of the slot. The CDs/DVDs are drawn in automatically and placed into the vacant compartments.
Sliding in CDs/DVDs Do not insert the CD/DVD until the LEDs on the DVD slot are flashing; otherwise, the CD/ DVD or the CD/DVD changer could be damaged. Do not continue to push on the CD/DVD; this may cause it to jam and prevent it from being able to eject again.◀ After they are inserted, it may take several mi‐ nutes for the CDs/DVDs to be read in. Removing a single CD/DVD
Press the button.
1. 2. Select the CD/DVD compartment.
The CD/DVD is partially ejected.
3. Remove the CD/DVD. Removing all CDs/DVDs
Press the button for a longer period.
1. 2. Remove the CDs/DVDs. Malfunctions If all LEDs on the CD/DVD changer flash rapidly, the system is malfunctioning.
186
To eliminate the malfunction: 1. Press one of the buttons:
▷
▷
The CD/DVD last inserted is ejected.
2. Remove the CD/DVD. If the LEDs stop flashing rapidly, the CD/DVD changer is functional again. Audio playback* The audio track of a DVD can be played back even if video playback is not possible in the ve‐ hicle. Only the main film without the previews or extras can be played back.
Starting playback A DVD is located in the DVD changer. 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the desired DVD.
Selecting a chapter using the button
Press the button repeatedly until the desired chapter is played.
Selecting a chapter using iDrive 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the desired DVD. 4. Select the desired chapter.
Fast forward/reverse
Press and hold the button.
Selecting the language* The languages that are available depend on the DVD.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
1. "CD/Multimedia" 2. "CD/DVD" 3. Select the desired DVD. 4. Open "Options". 5. "Audio/language" 6. Select the desired language. Notes CD/DVD player and changer
Do not remove the cover BMW CD/DVD players and changers are officially designated Class 1 laser products. Do not operate if the cover is damaged; otherwise, severe eye damage can result.◀
CDs and DVDs
Use of CDs/DVDs ▷ Do not use self-recorded CDs/DVDs with labels applied, as these can be‐ come detached during playback due to heat buildup and can cause irrepar‐ able damage to the device.
▷ Only use round CDs/DVDs with a standard
diameter of 4.7 in/12 cm and do not play CDs/DVDs with an adapter, e.g., single CDs; otherwise, the CDs or the adapter may jam and no longer eject.
▷ Do not use combined CDs/DVDs, e.g., DVD Plus, as the CDs/DVDs can jam and will no longer eject.◀
General malfunctions ▷ CD/DVD changers and players have been optimized for performance in vehicles. In some instances they may be more sensitive to faulty CDs/DVDs than stationary devices would be.
▷ If a CD/DVD cannot be played, first check
whether it has been inserted correctly.
Humidity High levels of humidity can lead to condensation on the CD/DVD or the laser's scan lens, and temporarily prevent playback. Malfunctions involving individual CDs/ DVDs If malfunctions occur only with particular CDs/ DVDs, this can be due to one of the following causes:
Home-recorded CDs/DVDs ▷ Possible reasons for malfunctions with
home-recorded CDs/DVDs are inconsistent data creation or recording processes, or poor quality or old age of the blank CD/DVD. ▷ Only label CDs/DVDs on the upper side with
a pen intended for this purpose.
Damage ▷ Avoid fingerprints, dust, scratches and
moisture.
▷ Store CDs/DVDs in a sleeve. ▷ Do not subject CDs/DVDs to temperatures over 122 ℉/50 ℃, high humidity or direct sunlight.
CDs/DVDs with copy protection CDs/DVDs are often provided with a copy pro‐ tection feature by the manufacturer. This can mean that some CDs/DVDs cannot be played or can only be played to a limited extent. MACROVISION This product contains copyrighted technology that is based on multiple registered US patents and the intellectual property of the Macrovision Corporation and other manufacturers. The use of this copy protection must be approved by Macrovision. Media protected by this product - unless otherwise agreed with Macrovision - may only be used for private purposes. Copying of this technology is prohibited.
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
187
