2013 Acura TL Owners Manual

Pressing the CRUISE button turns the system completely off and erases the previous cruising speed.

403

2013 TL12/07/20 11:21:44 31TK4640_409

HomeLink Universal Transceiver

The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.

General Safety Information Before programming your HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an ‘‘electronic eye,’’ or other safety and reverse stop features.

If your garage door was manufactured before April 1, 1982, you may not be able to program HomeLink to operate it. These units do not have safety features that cause the motor to stop and reverse it if an obstacle is detected during closing, increasing the risk of injury. Do not use HomeLink with any

404

garage door opener that lacks safety stop and reverse features.

Units manufactured between April 1, 1982 and January 1, 1993 may be equipped with safety stop and reverse features. If your unit does not have an external entrapment protection system, an easy test to confirm the function and performance of the safety stop and reverse feature is to lay a 2
under the closing door. The door should stop and reverse upon contacting the piece of wood. As an additional safety feature, garage door openers manufactured after January 1, 1993 are required to have external entrapment protection systems, such as an electronic eye, which detect an object obstructing the door.

×

Important Safety Precautions Refer to the safety information that came with your garage door opener

to test that the safety features are functioning properly. If you do not have this information, contact the manufacturer of the equipment. Before programming HomeLink to a garage door or gate opener, make sure that people and objects are out of the way of the device to prevent potential injury or damage. When programming a garage door opener, park just outside the garage.

−

If you just

Training HomeLink Beforeyoubegin received your vehicle and have not trained any of the buttons in HomeLink before, you should erase any previously learned codes before training the first button. To do this, press and hold the two outside buttons on the HomeLink transceiver for about 10 20 seconds, − until the red indicator flashes. Release the buttons, then proceed to step 1.

2013 TL12/07/20 11:21:57 31TK4640_410

If you are training the second or third buttons, go directly to step 1.

HomeLink Universal Transceiver

CONTINUED 405

2013 TL12/07/20 11:22:01 31TK4640_411

HomeLink Universal Transceiver

HomeLink is a registered trademark of Johnson Controls, Inc.

This device complies with the appropriate requirements or the required standards. See page 628
more information.

for

406

2013 TL12/07/20 11:22:11 31TK4640_412

Bluetooth HandsFreeLink (Models without navigation system)

HandsFreeLink (HFL)

Bluetooth allows you to place and receive phone calls using voice commands, without handling your cell phone.

To use HFL, you need a Bluetooth- compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:

In the U.S., visit www.acura.com/handsfreelink or call (888) 528-7876.

In Canada, visit or call (888) 528-7876.

www.handsfreelink.ca,

Using HFL HFLButtons

HFL TALK BUTTON

VoiceControlTips

MICROPHONE

HFL BACK BUTTON

HFL Talk button release to give a command or answer a call.

Press and

−

−

HFL Back button release to end a call, go back to the previous command, or cancel the command.

Press and

Air or wind noise from the dashboard and side vents, windows and moonroof may interfere with the microphone. Adjust or close them as necessary.

Press and release the HFL Talk button each time you want to make a command. After the beep, speak in a clear, natural tone.

CONTINUED

407

2013 TL12/07/20 11:22:21 31TK4640_413

Bluetooth HandsFreeLink (Models without navigation system)

InformationDisplay As an incoming call notification, you will see the following display:

SIGNAL STRENGTH

HFL MODE

BATTERY LEVEL STATUS

ROAM STATUS

SIGNAL STRENGTH

ROAM STATUS

PHONE NUMBER

Some phones may send battery, signal strength, and roaming status information to HFL.

BLUETOOTH INDICATOR

When there is an incoming call, or HFL is in use, ‘‘HANDSFREELINK’’ will appear on the display.

’’ indicator will be displayed on

‘‘ the audio display when a phone is linked.

Try to reduce all background noise. If the microphone picks up voices other than yours, commands may be misinterpreted.

Many commands can be spoken together. For example, you can say ‘‘Call 123-456- ’’ or ‘‘Dial Peter.’’

＃＃＃＃

To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.

HelpFeatures

To hear general HFL information, including help on pairing a phone or setting up the system, say ‘‘Tutorial.’’

For help at any time, including a list of available commands, say ‘‘Hands free help.’’

408

2013 TL12/07/20 11:22:29 31TK4640_414

Bluetooth HandsFreeLink (Models without navigation system)

How to Use HFL

The ignition switch must be in the ACCESSORY (I) or ON (II) position.

‘‘Pair’’

‘‘Edit’’

Pair a phone to the system

(See page 412)

Edit the name of a paired phone

(See page 413)

‘‘Phone Setup’’

‘‘Delete’’

Delete a paired phone from the system

(See page 413)

Press HFL Talk button

‘‘List’’

‘‘Status’’

‘‘Next Phone’’

Hear a list of all phones paired to the system Hear which paired phone is currently linked to the system (See page 414) Search for another previously paired phone to link to

(See page 413)

(See page 414)

‘‘Set Pairing Code’’

Set the pairing code to a ‘‘Fixed’’ or ‘‘Random’’ number (See page 414)

‘‘Call’’ or ‘‘Dial’’

‘‘123-456-

＃＃＃＃

’’

Enter desired phone number

(See page 415)

‘‘Jim Smith’’

Once a phonebook entry is stored, you can say a name here. (See page 415)

Press and release the HFL Talk button each time you give a command.

CONTINUED 409

2013 TL12/07/20 11:22:34 31TK4640_415

Bluetooth HandsFreeLink (Models without navigation system)

Press HFL Talk button

‘‘Redial’’

‘‘Transfer’’

‘‘Mute’’

‘‘Send’’

Redial the last number called

(See page 415)

Transfer a call from HFL to your phone, or from your phone to HFL

(See page 416)

Mute your voice to the person at the other end of the call

(See page 417)

Send numbers or names during a call (See page 417)

‘‘Store’’

‘‘Edit’’

Store a phonebook entry

(See page 418)

Edit the number of an existing phonebook entry

(See page 418)

‘‘Phonebook’’

‘‘Delete’’

Delete a phonebook entry (See page 419)

‘‘Receive Contact’’

‘‘List’’

If your phone supports this function, use this to transfer contacts from your phone to HFL (See page 419)

Hear a list of all stored phonebook entries

(See page 419)

Press and release the HFL Talk button each time you give a command.

410

2013 TL12/07/20 11:22:41 31TK4640_416

Bluetooth HandsFreeLink (Models without navigation system)

‘‘System Set up’’

Press HFL Talk button

‘‘Security’’

Apply a security passcode to the system that must be input at each key cycle to access the system

(See page 420)

‘‘Change Passcode’’

Change your security passcode(See page 421)

‘‘Call Notification’’

‘‘Auto Transfer’’

Set how you would like to be notified of an incoming call (See page 421)

Set calls to automatically transfer from your phone to HFL when you enter the vehicle(See page 421)

‘‘Clear’’

Clear the system of all paired phones, phonebook entries and security passcode(See page 422)

‘‘Change Language’’

Change language from English to French (See page 422) ＊

‘‘Tutorial’’

Hear a tutorial for general rules on using the system(See page 408)

‘‘Hands Free Help’’

Hear a list of available commands and additional information describing each command (See page 408)

Press and release the HFL Talk button each time you give a command.

＊

: Canadian models

CONTINUED 411

2013 TL12/07/20 11:22:54 31TK4640_417

Bluetooth HandsFreeLink (Models without navigation system)

To use HFL, you need to pair your Bluetooth-compatible cell phone to the system.

Phone Setup This command group is available for paired cell phones.

Phonepairingtips

You cannot pair your phone while the vehicle is moving.

Your phone must be in discovery or search mode to pair. Refer to your phone’s manual.

Up to six phones can be paired.

Your phone’s battery may drain faster when it is paired to HFL.

If after three minutes your phone is not ready to pair or a phone is not found, the system will time out and return to idle.

412

Topairacellphone: 1.

Press and release the HFL Talk button. If you are pairing a phone for the first time, HFL will give you information about the pairing process. If it is not the first phone you are pairing, say ‘‘ setup Pair

Phone .’’

’’ and say ‘‘

2.

Follow the HFL prompts and put your phone in discovery or search mode. HFL will give you a 4-digit pairing code and begin searching for your phone.

3.

When your phone finds a Bluetooth device, select HFL from the options and enter the 4-digit code from the previous step.

4.

Follow the HFL prompts and name the newly paired phone.

2013 TL12/07/20 11:23:05 31TK4640_418

Bluetooth HandsFreeLink (Models without navigation system)

Torenameapairedphone: Press and release the HFL Talk button before a command.

Todeleteapairedphone: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

2.

Say ‘‘

Edit

’’ after the prompts.

3.

If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.

1.

2.

3.

Say ‘‘

Phone setup

.’’

Say ‘‘

Delete

’’ after the prompts.

HFL will ask you which phone you want to delete. Follow the HFL prompts to continue with the deletion.

Tohearthenamesofallpaired phones: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

2.

Say ‘‘

List

’’ after the prompts.

3.

HFL will read out all the paired phone’s names.

CONTINUED

413

2013 TL12/07/20 11:23:16 31TK4640_419

Bluetooth HandsFreeLink (Models without navigation system)

Tochangethepairingcodesetting: Press and release the HFL Talk button before a command.

1.

2.

3.

Say ‘‘

Phone setup

.’’

Set pairing code

’’ after the

Say ‘‘ prompts.

If you want HFL to create a random code each time you pair a phone, say ‘‘ .’’ If you want to choose your own 4-digit code to be used each time, say ‘‘ and follow the HFL prompts.

Random

Fixed ’’

Tohearwhichpairedphoneis currentlylinked: Press and release the HFL Talk button before a command.

Tochangefromthecurrentlylinked phonetoanotherpairedphone: Press and release the HFL Talk button before a command.

1.

2.

3.

Say ‘‘

Phone setup

.’’

Say ‘‘

Status

’’ after the prompts.

HFL will tell you which phone is linked to the system.

1.

2.

3.

4.

Say ‘‘

Phone setup

.’’

Next phone

’’ after the

Say ‘‘ prompts.

HFL disconnects the linked phone and searches for another paired phone.

Once another phone is found, it is linked to the system. HFL will inform you which phone is now linked.

If no other phones are found or paired, HFL will inform you that the original phone is linked again.

414

2013 TL12/07/20 11:23:27 31TK4640_420

Bluetooth HandsFreeLink (Models without navigation system)

Making a Call You can make calls using any phone number or a name in the HFL phonebook. You can also redial the last number called.

Bluetooth is the wireless technology that links your phone to HFL. HFL uses a Class 2 Bluetooth, which means the maximum range between your phone and vehicle is 30 feet (10
meters).

During a call, HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle’s battery.

Tomakeacallusinga nameintheHFLphonebook: Press and release the HFL Talk button before a command.

Tomakeacallusinga phonenumber: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Call

’’ or ‘‘

Dial

.’’

1.

Say ‘‘

Call

’’ or ‘‘

Dial

.’’

2.

3.

Follow the HFL prompts and say the name stored in the HFL phonebook that you want to call.

Follow the HFL prompts to confirm the name and make the call.

2.

Follow the HFL prompts and say the phone number you want to dial.

3.

Follow the HFL prompts to confirm the number and say Call ‘‘

’’ or ‘‘

Dial

.’’

Once connected, you will hear the person you called through the audio speakers.

Toredialthelastnumber calledbyHFL: Press and release the HFL Talk button and say ‘‘

Redial

.’’

415

2013 TL12/07/20 11:23:33 31TK4640_421

Bluetooth HandsFreeLink (Models without navigation system)

Transferring a Call You can transfer a call from HFL to your phone, or from your phone to HFL.

Press and release the HFL Talk button and say ‘‘

Transfer

.’’

Receiving a Call When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on.

CallWaiting If your phone has Call Waiting, press and release the HFL Talk button to put the original call on hold and answer the incoming call.

Press the HFL Talk button to answer the call, or the HFL Back button to hang up.

To return to the original call, press the HFL Talk button again. If you don’t want to answer the incoming call, disregard it and continue with your original call. If you want to hang up the original call and answer the new call, press the HFL Back button.

416

2013 TL12/07/20 11:23:43 31TK4640_422

Muting a Call You can mute your voice to the person you are talking to during a call.

To mute your voice during a call, press and release the HFL Talk button and say ‘‘

Mute

.’’

To unmute your voice, press and release the HFL Talk button and say Mute ‘‘

’’ again.

Bluetooth HandsFreeLink (Models without navigation system)

Phonebook You can store up to 50 names with their associated numbers in HFL. The numbers you store can be not only phone numbers but other types, such as account numbers or passwords, which can be sent during a menu-driven call.

Send Numbers or Names During a Call HFL allows you to send numbers or names during a call. This is useful when you call a menu-driven phone system.

Tosendanameor numberduringacall: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Send

.’’

2.

Follow the HFL prompts and say the name or number you want to send.

3.

Follow the HFL prompts to send the tones and continue the call.

To send a pound (

NOTE: ‘‘pound.’’ To send a star (*), say ‘‘star.’’

), say

＃

CONTINUED

417

2013 TL12/07/20 11:23:55 31TK4640_423

Bluetooth HandsFreeLink (Models without navigation system)

Tostoreaphonebookentry: Press and release the HFL Talk button before a command.

NOTE:

Avoid using duplicate name entries.

Toeditthenumberstoredinaname: Press and release the HFL Talk button before a command.

Avoid using ‘‘home’’ as a name entry.

It is easier for HFL to recognize a multisyllabic or longer name. For example, use ‘‘Peter’’ instead of ‘‘Pete,’’ or ‘‘John Smith’’ instead of ‘‘John.’’

1.

Say ‘‘

Phonebook

.’’

2.

Say ‘‘

Edit

’’ after the prompts.

3.

Follow the HFL prompts and say the name entry you want to edit.

4.

When asked, say the new number for that name.

5.

Follow the HFL prompts to complete the edit.

1.

Say ‘‘

Phonebook

.’’

2.

3.

Say ‘‘

Store

’’ after the prompts.

Say a name you want to list as your phonebook entry.

4.

Say the number you want to store for the name entry.

5.

Follow the HFL prompts and say Enter ‘‘

’’ to store the entry.

418

2013 TL12/07/20 11:24:09 31TK4640_424

Bluetooth HandsFreeLink (Models without navigation system)

Todeleteaname: Press and release the HFL Talk button before a command.

Tolistallnamesinthephonebook: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phonebook

.’’

1.

Say ‘‘

Phonebook

.’’

2.

3.

Say ‘‘

Delete

’’ after the prompts.

Say the name you want to delete and follow the HFL prompts to complete the deletion.

2.

Say ‘‘

List

’’ after the prompts.

3.

HFL begins reading the names in the order they were stored.

4.

If you hear a name you want to call, immediately press the HFL Talk button and say ‘‘

Call

.’’

Tostoreaspecificphonenumber fromyourcellphonedirectlytothe HFLphonebook(availableonsome phones): Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phonebook

.’’

2.

3.

4.

Receive contact

Say ‘‘ prompts.

’’ after the

Follow the HFL prompts, select a number from your cell phone, and send it to HFL.

Follow the HFL prompts and name the number, or say Discard ‘‘ you want to store.

’’ if it is not the number

5.

Follow the HFL prompts if you want to store another number.

419

2013 TL12/07/20 11:24:17 31TK4640_425

Bluetooth HandsFreeLink (Models without navigation system)

Once a passcode is set, you NOTE: will need to enter it to use HFL each time you start the vehicle. If you forget the code, your dealer will have to reset it for you, or you will have to clear the entire system (see page 422

).

System Setup This command group allows you to change or customize HFL basic settings.

Toseta4-digitpasscodetolockthe HFLsystemforsecuritypurposes: Press and release the HFL Talk button before a command.

1.

Say ‘‘

System setup

.’’

2.

Say ‘‘

Security

’’ after the prompts.

3.

Follow the HFL prompts and say the 4-digit passcode you want to set.

4.

Follow the HFL prompts to confirm the number.

420

2013 TL12/07/20 11:24:29 31TK4640_426

Bluetooth HandsFreeLink (Models without navigation system)

Tochangeyoursecuritypasscode: Press and release the HFL Talk button before a command.

1.

2.

Say ‘‘

System setup

.’’

Change passcode

’’ after the

Say ‘‘ prompts.

3.

Follow the HFL prompts and say the new 4-digit passcode.

4.

Follow the HFL prompts to confirm the number.

Toselecteitheraringtoneora promptastheincomingcall notification : Press and release the HFL Talk button before a command.

＊

1.

2.

3.

Say ‘‘

System setup

.’’

Call notification

’’ after the

Say ‘‘ prompts.

Follow the HFL prompts and say Ring tone Prompt ‘‘ .’’ You ’’ for no audible can also say ‘‘ incoming call notification.

’’ or ‘‘ Off

＊

The default setting is a ring tone.

Toactivateordeactivatetheauto transferfunction: If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL with the ignition switch in the ACCESSORY (I) or ON (II) position.

Press and release the HFL Talk button before a command.

1.

2.

3.

Say ‘‘

System setup

.’’

Auto transfer

Say ‘‘ prompts.

’’ after the

HFL will let you know if auto transfer is on or off, depending on the previous setting. Follow the HFL prompts to change the setting.

CONTINUED

421

2013 TL12/07/20 11:24:43 31TK4640_427

Bluetooth HandsFreeLink (Models without navigation system)

Toclearthesystem: This operation clears the passcodes, paired phones, and all names in the HFL phonebook.

Press and release the HFL Talk button before a command.

1.

Say ‘‘

System setup

.’’

2.

Say ‘‘

Clear

’’ after the prompts.

3.

Follow the HFL prompts to continue to complete the clearing procedure.

Quick Language Selection Canadianmodelsonly Toquicklychangethelanguage: Press and release the HFL Talk button before a command.

1.

Say the language you want to change to in that language.

2.

Follow the HFL prompts.

You can also clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say ‘‘ clear in the HFL phonebook will be lost.

.’’ Paired phones, and all names

System

422

Change Language Canadianmodelsonly Tochangethesystemlanguage betweenEnglishandFrench: Press and release the HFL Talk button before a command.

1.

2.

Say ‘‘

Change language

.’’

Follow the HFL prompts to change the language to English or French.

If you have not named your paired phone in the language you just selected, HFL will ask you to name it in the current language.

When French is your currently selected language, you can give voice commands in French.

2013 TL12/07/20 11:24:49 31TK4640_428

Bluetooth HandsFreeLink (Models without navigation system)

Bluetooth

Bluetooth Wireless Technology word mark and logos The are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honda Motor Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

HFL Limitations An incoming call on HFL will Audio when it is interrupt playing. Audio will resume when the call is ended.

Bluetooth

This device complies with the appropriate requirements or the required standards. See page 628
more information.

for

423

2013 TL12/07/20 11:24:59 31TK4640_429

Bluetooth HandsFreeLink (Models with navigation system)

HandsFreeLink (HFL)

Bluetooth allows you to place and receive phone calls using either the navigation system controls or voice commands without the distraction of handling your cell phone.

Using HFL InterfaceDial

CANCEL BUTTON

INFO BUTTON

To use HFL, you need a Bluetooth- compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:

In the U.S., visit www.acura.com/handsfreelink or call (888) 528-7876.

In Canada, visit or call (888) 528-7876.

www.handsfreelink.ca,

424

DIAL

PHONE BUTTON

SELECTOR

ENTER

Use the Interface Dial to make menu or list selections.

To select an item on the screen, turn the interface dial left or right to highlight it, and then press ENTER.

Whenaphonehasnever beenpairedtothesystem: Press the PHONE button or PICK- UP button to enter the phone pairing procedure (see page

432

).

To select an item that comes with icons,

, or

push the interface selector up, down, left, or right.

2013 TL12/07/20 11:25:09 31TK4640_430

Bluetooth HandsFreeLink (Models with navigation system)

U.S. model is shown.

Press the INFO button to go to the main information screen to select the Cellular Phone menu.

Whenthereisapairedphoneisinyour vehicle: Press the PHONE button or PICK- UP button to go to the Cellular Phone screen.

Press the CANCEL button to go back to the previous screen.

HFLButtons

PICK-UP BUTTON

HANG-UP BUTTON

TALK BUTTON

BACK BUTTON

−

PICK-UP Button release to answer a call, or press to go directly to the Cellular Phone screen.

Press and

HANG-UP Button release to end or decline a call.

Press and

−

CONTINUED

425

2013 TL12/07/20 11:25:18 31TK4640_431

Bluetooth HandsFreeLink (Models with navigation system)

TALK Button to give a command.

−

Press and release

When the Cellular Phone screen is displayed, pressing the TALK button guides you through all available functions.

BACK Button Press and release to go back to the previous command, or cancel the command.

−

426

VoiceControlTips

MICROPHONE

Try to reduce all background noise. If the microphone picks up voices other than yours, commands may be misinterpreted.

To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.

HelpFeature For help at any time, including a list of available options, say ‘‘Help.’’

Air or wind noise from the dashboard and side vents, windows and moonroof may interfere with the microphone. Adjust or close them as necessary.

LanguageSelection Refer to the navigation system manual for how to change the system’s language between English, French, and Spanish.

Press and release the Talk button each time you want to make a command. After the beep, speak in a clear, natural tone.

2013 TL12/07/20 11:25:26 31TK4640_432

HFLDisplay As an incoming call notification, you will see the following display:

Bluetooth HandsFreeLink (Models with navigation system)

When the audio is in use.

U.S. model is shown.

CALLER NAME PHONE DIALING

BATTERY LEVEL STATUS

SIGNAL STRENGTH

BLUETOOTH INDICATOR

ROAM STATUS

LENGTH OF CALL TIME

To answer the call and show the HFL information, press the PICK-UP button on the steering wheel.

Some phones may send battery, signal strength, and roaming status information to HFL.

427

2013 TL12/08/03 20:58:38 31TK4640_433

Bluetooth HandsFreeLink (Models with navigation system) How to Use HFL The power mode must be in ACCESSORY or ON (see page

184

).

Call History

All

Dial

Receive

Missed

Display the last 20 incoming, outgoing, or missed calls(see page 445). (Appears only when a phone is connected to the system via HFL.)

Display the last 20 outgoing calls (Appears only when a phone is connected to the system via HFL.)

(see page 445).

Display the last 20 incoming calls (Appears only when a phone is connected to the system via HFL.)

(see page 445).

Display the last 20 missed calls (Appears only when a phone is connected to the system via HFL.)

(see page 445).

Cellular Phone

Phone Book

Display the paired phone’s previously imported phonebook (or import a new one) (see page 444).

Dial

Enter a phone number to dial (see page 445).

More

Speed Dial

Displays a list of all 20 speed dial entries. The first 4 speed dial numbers are shown on the Cellular Phone screen (see page 446).

Redial

Push and hold the interface selector (ENTER) to redial the last number called by HFL (see page 446).

Voice commands can be used for all above options. Voice commands for the HFL system can only be used from the Cellular Phone screen. To quickly access the Cellular Phone screen, press the Pick-Up button on the steering wheel. Press and release the Talk button each time you give a command.

428

2013 TL12/08/03 20:58:45 31TK4640_434

Bluetooth HandsFreeLink (Models with navigation system)

Add New Phone

Pair a phone to the system

(see page 432).

Connect

Connect a paired phone to the system

(see page 436).

Cellular Phone

Phone Setup

Connection

Disconnect

Disconnect a paired phone from the system

(see page 436).

Delete

Delete a previously paired phone

(see page 435).

Pass-key

Create a Pass-key number for a paired phone (see page 435).

Store

Speed Dial

Delete

Speed Dial

Select a number from the Call History, Phone Book, or manual entry to store as a speed dial number (see page 442).

Delete a previously stored speed dial number

(see page 444).

Store Voice Tag

Create a voice tag for a speed dial number

(see page 443).

Edit

Speed Dial

Delete Voice Tag

Delete a voice tag for a speed dial number

(see page 443).

Voice commands can be used for all above options. Voice commands for the HFL system can only be used from the Cellular Phone screen. To quickly access the Cellular Phone screen, press the Pick-Up button on the steering wheel. Press and release the Talk button each time you give a command.

CONTINUED 429

2013 TL12/08/03 20:58:49 31TK4640_435

Bluetooth HandsFreeLink (Models with navigation system)

Cellular Phone

Edit Phone Name/PIN

Create a phone name/PIN number for a paired phone

(see page 437).

Phone Setup

Auto Transfer

Set calls to automatically transfer from your phone to HFL when you enter the vehicle (see page 439).

Auto Answer

Set incoming calls to be automatically answered

(see page 439).

Clear Cellular

Phone

Information

Clear the system of all paired phones, phonebook entries, speed dials, and pass-keys (see page 439).

Voice commands can be used for all above options. Voice commands for the HFL system can only be used from the Cellular Phone screen. To quickly access the Cellular Phone screen, press the Pick-Up button on the steering wheel. Press and release the Talk button each time you give a command.

430

2013 TL12/07/20 11:25:48 31TK4640_436

Bluetooth HandsFreeLink (Models with navigation system)

To use HFL, you need to pair your Bluetooth-compatible cell phone to the system.

HFL uses a Class 2 Bluetooth, which means, the maximum range between your phone and vehicle is 30 feet 10 meters).

Cellular Phone

Phone Setup You can set up your phone and other system options with this menu.

Push the selector down for PHONE SETUP.

Press the PHONE button or PICK- UP button to go to the Cellular Phone screen.

Select ‘‘PHONE SETUP’’ from the Cellular Phone screen.

CONTINUED

431

2013 TL12/07/20 11:25:55 31TK4640_437

Bluetooth HandsFreeLink (Models with navigation system)

SetupBluetoothPhone Topairacellphone(whenthereisno phonepairedtothesystem): Press the PHONE button or PICK- UP button. The system starts pairing when there is no phone paired to the system.

1.

Press the PHONE button or PICK- UP button. The system prompts you to pair a phone. Select ‘‘Yes’’ on the confirmation screen.

2.

Make sure your phone is set to discoverable or visibility is ON, and select ‘‘OK.’’ HFL begins to search for your phone.

432

2013 TL12/07/20 11:26:04 31TK4640_438

Bluetooth HandsFreeLink (Models with navigation system)

3.

4.

If your phone is found, it is displayed on the screen. Select it and press ENTER.

5.

HFL gives you a 4-digit pass-key that you will need to input on your phone.

If your phone doesn’t appear on the list, select ‘‘Phone not found?’’ and search for Bluetooth devices using your phone. From your phone, select ‘‘HandsFreeLink.’’

6.

When your phone prompts you, input the 4-digit pass-key.

7.

You will receive a notification on the screen and your phone if pairing is successful.

U.S. model is shown.

OnU.S.models You will receive a notification to set up an AcuraLink connection. If you 449
want to do this, please see page or select ‘‘Setup Later.’’

CONTINUED

433

2013 TL12/08/08 20:02:58 31TK4640_439

Bluetooth HandsFreeLink (Models with navigation system)

Topairacellphone(whenthereareone ormorephonespairedtothesystem):

3.

Select ‘‘Add New Phone.’’

4.

Follow steps 2 through 7 from the previous page.

Phonepairingtips

You cannot pair your phone while the vehicle is moving.

Up to six phones can be paired.

Your phone’s battery may drain faster when it is paired to HFL.

1.

Select ‘‘PHONE SETUP’’ from the Cellular Phone screen.

2.

Select ‘‘Connection’’ from the Phone Setup screen.

434

2013 TL12/07/20 11:26:26 31TK4640_440

Bluetooth HandsFreeLink (Models with navigation system)

Tochangethepass-keysetting:

Example

Todeleteapairedphone:

TRASH ICON

1.

Select ‘‘Connection’’ from the Phone Setup screen.

2.

Select ‘‘Pass-key.’’

The default pass-key ‘‘0000’’ NOTE: is used until you change the setting.

For a randomly generated pass-key each time you pair a phone, select ‘‘Random.’’

Push the selector to left to delete.

To create your own pass-key, select ‘‘Fixed’’ and follow steps 3 and 4.

3.

Delete the current pass-key.

4.

Enter a new pass-key, and select ‘‘OK.’’

BLUETOOTH ICON

1.

Select ‘‘Connection’’ from the Phone Setup screen.

2.

Select ‘‘Delete.’’

3.

Select the phone you want to delete. The Bluetooth icon shows you the currently linked phone.

CONTINUED

435

2013 TL12/07/20 11:26:38 31TK4640_441

Bluetooth HandsFreeLink (Models with navigation system)

4.

A trash icon appears next to the selected phone. Select ‘‘OK’’ to continue.

5.

Select ‘‘Yes’’ from the confirmation screen.

Toconnectanotherpairedphone:

Todisconnectapairedphone:

436

BLUETOOTH ICON

1.

Select ‘‘Connection’’ from the Phone Setup screen.

1.

Select ‘‘Connection’’ from the Phone Setup screen.

2.

Select ‘‘Connect.’’

2.

Select ‘‘Disconnect.’’

3.

Select the phone you want to connect. The Bluetooth icon shows you the currently linked phone.

3.

Select the phone you want to disconnect. The Bluetooth icon shows you the currently linked phone.

4.

Select ‘‘OK’’ to continue.

2013 TL12/07/20 11:26:45 31TK4640_442

Bluetooth HandsFreeLink (Models with navigation system)

4.

Select ‘‘OK’’ to continue.

5.

Select ‘‘Yes’’ from the confirmation screen.

EditPhoneName/PIN You can name up to six HFL phone names. Each can be PIN protected, and have its own phonebook, speed dial, and call history.

Toeditaphonename:

Select a phone name.

1.

Select ‘‘Edit Phone Name/PIN’’ from the Phone Setup screen.

2.

Push the interface selector left or right to select the phone name you want to edit on the Edit Phone Name/PIN screen.

CONTINUED

437

2013 TL12/07/20 11:26:56 31TK4640_443

Bluetooth HandsFreeLink (Models with navigation system)

4.