2012 Acura TL Owners Manual

95

2012 TL11/01/21 15:47:54 31TK4630_101

Multi-Information Display

Group Setup METER SETUP (P.101)

Menu Item

Description

Setting Option

Page

LANGUAGE SELECTION

Changes the language used in the display.

ADJUST OUTSIDE TEMP. DISPLAY

Changes the outside temperature reading above or below its current reading.

TRIP A RESET WITH REFUEL ELAPSED TIME RESET

ADJUST ALARM VOLUME

AUTO INTERIOR ILLUMINATION

Causes trip meter A and the average fuel economy to reset when you refuel. Resets the elapsed time of your current trip.

Changes the indicator alarm volumes into three levels.

Changes the interior light sensitivity to your liking.

KEYLESS START GUIDANCE SCREENS MEMORY POSITION LINK

＊

Changes the display of the keyless start guidance screens. Changes the driver’s seat and the outside mirror positions to a stored setting.

＊

＊

＊

ENGLISH FRENCH SPANISH 5°F − 〜 ± (U.S.) 3°C − 〜 ± (Canada) ON OFF IGN OFF TRIP A TRIP B HIGH MID ＊ LOW MAX HIGH MID ＊ ON ＊ OFF ON OFF

＊

0°F

＊

〜

5°F

0°C

＊

〜

3°C

LOW MIN OFF

103

104

105

106

108

109

110

113

POSITION SETUP (P.112) 1 : 2 :

Default setting Only on models with keyless access system

＊ ＊

96

2012 TL11/01/14 18:11:03 31TK4630_102

Multi-Information Display

Group Setup

KEYLESS ACCESS SETUP (P.115)

＊

LIGHTING SETUP (P.120)

Menu Item

DOOR UNLOCK MODE

KEYLESS ACCESS LIGHT FLASH

KEYLESS ACCESS BEEP

INTERIOR LIGHT DIMMING TIME HEADLIGHT AUTO OFF TIMER

AUTO LIGHT SENSITIVITY

＊ ＊

1: 2:

Default setting Only on models with keyless access system

Description

Setting Option

Changes which doors unlock when you use the remote or grab the driver’s door handle. Causes some exterior lights to blink when you unlock/lock the doors by grabbing or touching the sensor/pushing the button on the driver’s door handle. Causes the beeper to sound when you unlock/lock the doors by grabbing or touching the sensor/ pushing the button on the driver’s door handle. Changes how long (in seconds) the interior lights stay on after you close the doors. Changes how long (in seconds) the exterior lights stay on after you close the driver’s door.

Changes the timing of when the headlights come on. The headlight switch needs to be in the AUTO position.

＊

DRIVER DOOR ALL DOORS ON OFF

＊

＊

ON OFF

60 sec

0 sec

LOW MIN

＊

＊

15 sec 30 sec 60 sec 30 sec 15 sec MAX HIGH MID

＊

Page 116

117

118

121

122

123

CONTINUED 97

2012 TL11/01/14 18:11:11 31TK4630_103

Multi-Information Display

Group Setup

DOOR SETUP (P.125)

Menu Item AUTO DOOR LOCK

Description

Setting Option

Changes when the doors automatically lock.

AUTO DOOR UNLOCK

Changes when the doors automatically unlock.

KEY AND REMOTE UNLOCK MODE

KEYLESS LOCK ACKNOWLEDGMENT

SECURITY RELOCK TIMER

DEFAULT ALL (P.134) 1 : 2 : 3 :

Default setting Default setting for automatic transmission Default setting for manual transmission

＊ ＊ ＊

98

Changes which doors unlock with the remote transmitter/keyless access remote on the first push. The exterior lights flash each time you press the LOCK or UNLOCK button. A beeper will also sound when you press the LOCK button twice. Changes how long it takes (in seconds) for the doors to relock and the security system to set after you unlock but do not open the door. Set/Cancel all the customized settings as default.

＊

OFF WITH VEH SPD SHIFT FROM P (A/T only) OFF DRIVER DOOR With SHIFT to P (A/T only) ALL DOORS With SHIFT to P (A/T only) DRIVER DOOR With IGN OFF ALL DOORS With IGN OFF DRIVER DOOR ALL DOORS

＊

＊

＊

ON OFF

＊

30 sec 60 sec 90 sec CANCEL SET

Page

127

128

130

131

133

134

2012 TL11/01/14 18:11:25 31TK4630_104

Customize Settings You can customize some of the vehicle control settings to your preference. Here are the settings you can customize: METER SETUP POSITION SETUP KEYLESS ACCESS SETUP LIGHTING SETUP DOOR SETUP

＊

＊

: Only on models with keyless

access system

When you want to change the vehicle control settings, press the INFO ( / ) button to select CHANGE SETTINGS, then press the SEL/RESET button.

▲ ▼

Multi-Information Display

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown on the next page. Press the INFO ( / ) button until you see the setup you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

If you do not make any changes, select ‘‘EXIT.’’ The display returns to the normal display.

If you want the settings as they were when the vehicle left the factory, select DEFAULT ALL, as described on page

134

CONTINUED

99

2012 TL11/01/14 18:11:31 31TK4630_105

Multi-Information Display

: Press the SEL/RESET button.

: Press the INFO button (

). ▲ ▼

＊

: On models with keyless access

system only

DEFAULT ALL See page 134.

METER SETUP See page 101.

POSITION SETUP See page 112.

KEYLESS ACCESS SETUP ＊ See page 115.

LIGHTING SETUP See page 120.

DOOR SETUP See page 125.

100

2012 TL11/01/14 18:11:44 31TK4630_106

Meter Setup Here are the selectable custom settings for the meter setup: LANGUAGE SELECTION ADJUST OUTSIDE TEMP. DISPLAY TRIP A RESET WITH REFUEL ELAPSED TIME RESET ADJUST ALARM VOLUME AUTO INTERIOR ILLUMINATION

Onmodelswithkeylessaccess system KEYLESS START GUIDANCE SCREENS

While ‘‘METER SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Multi-Information Display

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

CONTINUED

101

2012 TL11/01/14 18:11:49 31TK4630_107

Multi-Information Display

: Press the SEL/RESET button.

: Press the INFO button (

). ▲ ▼

See page 103.

See page 104. See page 105. See page 106. See page 108.

See page 109.

Onmodelswith keylessaccess systemonly See page 110.

102

2012 TL11/01/14 18:12:00 31TK4630_108

LanguageSelection

Multi-Information Display

There are three language selections you can make: English, French, and Spanish. To choose the language you want, follow these instructions:

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Press the SEL/RESET button to see the selections.

Select the desired language by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘LANGUAGE SELECTION’’ and repeat the procedure again.

CONTINUED

103

2012 TL11/01/14 18:12:13 31TK4630_109

Multi-Information Display

AdjustOutsideTemp.Display

If you sometimes find that the temperature reading is a few degrees above or below the actual temperature, you can adjust it by following these instructions: You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly. Press the SEL/RESET button to enter the setting.

▲ ▼

104

U.S. models

Canadian models

U.S. models

Canadian models

The displayed number is the current adjustment above or below the outside temperature.

Adjust the outside temperature value by pressing the INFO ( / ) button repeatedly. Press the SEL/RESET button to set the desired value.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘ADJUST OUTSIDE TEMP. DISPLAY’’ and repeat the procedure again.

2012 TL11/01/14 18:12:24 31TK4630_110

TripAResetWithRefuel

Multi-Information Display

To cause Trip A and average fuel for trip A to reset every time you refuel your vehicle, follow these instructions:

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘TRIP A RESET WITH REFUEL’’ and repeat the procedure again.

CONTINUED

105

2012 TL11/01/14 18:12:35 31TK4630_111

Multi-Information Display

ElapsedTimeReset There are three elapsed time reset choices you can make:

−

IGN OFF The elapsed time is reset when you turn the ignition switch to the LOCK (0) position.

＊

TRIP A when Trip A is reset.

−

The elapsed time is reset

TRIP B when Trip B is reset.

−

The elapsed time is reset

＊ Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. VEHICLE OFF (LOCK) Mode is the equivalent of LOCK (0). For more information, see pages 184 and 187.

106

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Press the SEL/RESET button to see the selections.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

2012 TL11/01/14 18:12:40 31TK4630_112

Multi-Information Display

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘ELAPSED TIME RESET’’ and repeat the procedure again.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

107

2012 TL11/01/14 18:12:51 31TK4630_113

Multi-Information Display

AdjustAlarmVolume

Select the warning alarm volume from three levels.

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Press the SEL/RESET button to see the selections.

Select the desired level by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘ADJUST ALARM VOLUME’’ and repeat the procedure again.

108

2012 TL11/01/14 18:13:02 31TK4630_114

AutoInteriorIllumination While the headlight switch is turned on, the interior lights gradually dim, as the outside light level gets low. You can customize at which outside light level the lights start to dim.

There are MAX, HIGH, MID, LOW and MIN levels and OFF for the auto interior illumination settings.

If you want the illuminations to start dimming as early as possible, select MAX. For illuminations to start dimming as late as possible, select MIN. Choose HIGH, MID, or LOW for levels in between.

To disable the auto interior illumination function, select OFF.

Multi-Information Display

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Press the SEL/RESET button to see the selections.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

CONTINUED

109

2012 TL11/01/14 18:13:10 31TK4630_115

Multi-Information Display

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘AUTO INTERIOR ILLUMINATION’’ and repeat the procedure again.

110

Onmodelswithkeylessaccesssystem KeylessStartGuidanceScreens When this item is set to ON, you will see some guidance messages on the multi-information display. You can change this setting between on and off. For more information on start guidance messages, see page 188

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

2012 TL11/01/14 18:13:17 31TK4630_116

Multi-Information Display

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘KEYLESS START GUIDANCE SCREENS’’ and repeat the procedure again.

111

2012 TL11/01/14 18:13:24 31TK4630_117

Multi-Information Display

Position Setup You can customize the MEMORY POSITION LINK setting in position setup.

While ‘‘POSITION SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button until you see the custom setting then press the SEL/RESET button to enter your selection.

▲ ▼

112

See page113 .

: Press the SEL/RESET button.

: Press the INFO button (

). ▲ ▼

2012 TL11/01/14 18:13:35 31TK4630_118

MemoryPositionLink When Memory Position Link is set to ON, the driver’s seat and the outside mirrors move to the positions stored in memory. To cause the memory to activate, open the driver’s door with the remote transmitter. On models with keyless access system, open the driver’s door with the remote, or grab the door handle while carrying the remote.

To set the memory positions, see page

170

Onmodelswithkeylessaccesssystem For information on using the remote, see page

173

Multi-Information Display

You can choose this item to customize from ‘‘POSITION SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

CONTINUED

113

2012 TL11/01/14 18:13:40 31TK4630_119

Multi-Information Display

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘MEMORY POSITION LINK’’ and repeat the procedure again.

114

2012 TL11/01/14 18:13:50 31TK4630_120

Keyless Access Setup Onmodelswithkeylessaccesssystem There are three custom settings for the keyless access setup:

DOOR UNLOCK MODE KEYLESS ACCESS LIGHT FLASH KEYLESS ACCESS BEEP

While ‘‘KEYLESS ACCESS SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button, until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

Multi-Information Display

See page116 .

See page117 .

See page118 .

: Press the SEL/RESET button.

: Press the INFO button (

). ▲ ▼

CONTINUED

115

2012 TL11/01/14 18:14:01 31TK4630_121

Multi-Information Display

DoorUnlockMode

To select whether the driver’s door or all doors unlock when you open the driver’s door with the remote or by grabbing the door handle (while carrying the remote), follow these instructions:

You can choose this item to customize from ‘‘KEYLESS ACCESS SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

116

Press the SEL/RESET button to see the selections.

Select DRIVER DOOR or ALL DOORS by pressing the INFO ( / ▲ ) button, then enter your selection ▼ by pressing the SEL/RESET button.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘DOOR UNLOCK MODE’’ and repeat the procedure again.

2012 TL11/01/14 18:14:10 31TK4630_122

KeylessAccessLightFlash When KEYLESS ACCESS LIGHT FLASH is set to ON, some exterior lights blink twice when you unlock the doors by grabbing the driver’s door handle while carrying the remote.

The same exterior lights blink once when you lock the doors by pushing the door lock button while carrying the remote.

Multi-Information Display

You can choose this item to customize from ‘‘KEYLESS ACCESS SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

CONTINUED

117

2012 TL11/01/14 18:14:18 31TK4630_123

Multi-Information Display

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘KEYLESS ACCESS LIGHT FLASH’’ and repeat the procedure again.

118

KeylessAccessBeep When KEYLESS ACCESS BEEP is set to ON, the beeper sounds twice when you unlock the doors by grabbing the drivers door handle while carrying the remote.

When you lock the doors by pushing the door lock button while carrying the remote, the beeper sounds once.

You can choose this item to customize from ‘‘KEYLESS ACCESS SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

2012 TL11/01/14 18:14:26 31TK4630_124

Multi-Information Display

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘KEYLESS ACCESS BEEP’’ and repeat the procedure again.

119

2012 TL11/01/14 18:14:35 31TK4630_125

Multi-Information Display

Lighting Setup Here are the three custom settings for the lighting setup: INTERIOR LIGHT DIMMING TIME HEADLIGHT AUTO OFF TIMER AUTO LIGHT SENSITIVITY

While ‘‘LIGHTING SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

120

See page121 .

See page122 .

See page123 .

: Press the SEL/RESET button.

: Press the INFO button (

). ▲ ▼

2012 TL11/01/14 18:14:46 31TK4630_126

InteriorLightDimmingTime

Multi-Information Display

The interior lights fade out when you close all doors. To change how long the lights stay on before they fade out, follow these instructions:

You can choose this item to customize from ‘‘LIGHTING SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to see the selections.

Select the desired setting (15 sec, 30
sec, or 60 sec) by pressing the INFO ( / ) button, then enter your ▲ ▼ selection by pressing the SEL/ RESET button.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘INTERIOR LIGHT DIMMING TIME’’ and repeat the procedure again.

CONTINUED

121

2012 TL11/01/14 18:14:53 31TK4630_127

Multi-Information Display

HeadlightAutoOffTimer The headlights, parking lights, side marker lights, taillights, and license plate lights go off after the selected time when you remove the key from the ignition switch and close the driver’s door. On models with keyless access system, the lights go off after the selected time when you close the driver’s door and take the remote with you. To change how long the lights stay on before they go off, follow these instructions:

122

You can choose this item to customize from ‘‘LIGHTING SETUP’’ by pressing the INFO ( / ▲ ▼

) button repeatedly.

Press the SEL/RESET button to see the selections.

Select the desired setting (60 sec, 30
sec, 15 sec or 0 sec) by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

▲ ▼

2012 TL11/01/14 18:15:06 31TK4630_128

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘HEADLIGHT AUTO OFF TIMER’’ and repeat the procedure again.

AutoLightSensitivity The headlights automatically come on when the headlight switch is in the AUTO position and the ambient light reaches a changeable level. You can select the auto light sensitivity from the following five levels: MAX The headlights come on when it is bright.

−

−

HIGH The headlights come on when it is somewhat bright.

−

MID The headlights come on when it is as bright as sunset or sunrise.

−

LOW The headlights come on when it is somewhat dark.

−

MIN The headlights come on when it is dark.

Multi-Information Display

You can choose this item to customize from ‘‘LIGHTING SETUP’’ by pressing the INFO ( / ) button repeatedly. ▲ ▼

CONTINUED

123

2012 TL11/01/14 18:15:14 31TK4630_129

Multi-Information Display

Press the SEL/RESET button to see the selections.

Select the desired setting (MAX, HIGH, MID, LOW or MIN) by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘AUTO LIGHT SENSITIVITY’’ and repeat the procedure again.

124

2012 TL11/01/14 18:15:25 31TK4630_130

Door Setup Here are the five custom settings for the door setup:

AUTO DOOR LOCK AUTO DOOR UNLOCK KEY AND REMOTE UNLOCK MODE KEYLESS LOCK ACKNOWLEDGMENT SECURITY RELOCK TIMER

While ‘‘DOOR SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Multi-Information Display

Each time you press the INFO ( / ▲ ) button, the screen changes as ▼ shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

▲ ▼

CONTINUED

125

2012 TL11/01/24 16:26:48 31TK4630_131

Multi-Information Display

126

See page 127.

See page 128.

See page 130.

See page 131.

See page 133.

: Press the SEL/RESET button.

: Press the INFO button (

). ▲ ▼

2012 TL11/01/14 18:15:42 31TK4630_132

AutoDoorLock There are three settings you can choose from:

−

SHIFT FROM P The doors lock whenever you move the shift lever out of Park. (Automatictransmissionmodelonly)

−

WITH VEH SPD The doors lock when the vehicle speed reaches about 10 mph (about 15 km/h).

−

OFF The auto door lock is deactivated all the time.

Multi-Information Display

You can choose this item to customize from ‘‘DOOR SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

A/T model is shown.

Press the SEL/RESET button to enter the selecting mode.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

CONTINUED

127

2012 TL11/01/14 18:15:54 31TK4630_133

Multi-Information Display

A/T model is shown.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

AutoDoorUnlock There are five possible settings for automatic transmission models and three possible settings for manual transmission models.

Automatictransmissionmodelonly DRIVER DOOR With SHIFT to P − The driver’s door unlocks when you move the shift lever to Park with the brake pedal depressed.

Automatictransmissionmodelonly ALL DOORS With SHIFT to P All − the doors unlock when you move the shift lever to Park with the brake pedal depressed.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘AUTO DOOR LOCK’’ and repeat the procedure again.

DRIVER DOOR With IGN OFF − The driver’s door unlocks when you turn the ignition switch to the LOCK (0) position.

＊

128

ALL DOORS With IGN OFF All the doors unlock when you turn the ignition switch to the LOCK (0) position.

−

＊

−

OFF deactivated all the time.

The auto door unlock is

＊ Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. VEHICLE OFF (LOCK) Mode is the equivalent of LOCK (0). For more information, see pages 184 and 187.

2012 TL11/01/14 18:16:03 31TK4630_134

Multi-Information Display

You can choose this item to customize from ‘‘DOOR SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

A/T model is shown.

Press the SEL/RESET button to see the selections.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customize item screen.

CONTINUED

129

2012 TL11/01/14 18:16:12 31TK4630_135

Multi-Information Display

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘AUTO DOOR UNLOCK’’ and repeat the procedure again.

KeyandRemoteUnlockMode

130

You can select whether the driver’s door or all the doors unlock the first time you press the unlock button on the remote transmitter/keyless access remote.

You can choose this item to customize from ‘‘DOOR SETUP’’ by pressing the INFO ( / ) button repeatedly.

▲ ▼

Press the SEL/RESET button to enter the selecting mode.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

▲ ▼

2012 TL11/01/14 18:16:22 31TK4630_136

KeylessLockAcknowledgment When you press the LOCK button on the remote transmitter or the keyless access remote, some exterior lights flash, and a beeper sounds when you push the LOCK