Login- 2013 Acura MDX Owners Manuals
- Acura MDX Owners Manuals
- 2008 Acura MDX Owners Manuals
- Acura MDX Owners Manuals
- 2009 Acura MDX Owners Manuals
- Acura MDX Owners Manuals
- 2012 Acura MDX Owners Manuals
- Acura MDX Owners Manuals
- 2011 Acura MDX Owners Manuals
- Acura MDX Owners Manuals
- 2010 Acura MDX Owners Manuals
- Acura MDX Owners Manuals
- Download PDF Manual
-
Automatic Lighting Off Feature This feature turns off the headlights, all other exterior lights, and the instrument panel lights within 15
seconds after you remove the key and close the driver’s door.To change the ‘‘HEADLIGHT AUTO OFF TIMER’’ setting, see page
102
The automatic lighting off feature activates if you leave the headlight switch in the ‘‘ position or if the lights are turned on by setting the switch in the ‘‘AUTO’’ position, and you remove the key, then open and close the driver’s door.
’’ or ‘‘
’’
Headlights
If you turn the ignition switch to the LOCK (0) position with the headlight switch on, but do not open the door and get out, the lights turn off after 10 minutes (3 minutes, if the switch is in the ‘‘AUTO’’ position).
The lights turn on again when you unlock or open the driver’s door. If you unlock the door, but do not open it within 15 seconds, the lights go off. With the driver’s door open, you will hear a lights-on reminder chime.
121
2008 MDX ０７／０７／０９ ０９：３７：５９ ３１ＳＴＸ６１０ ０１２７
Hazard Warning Button, Rear Window Defogger
Hazard Warning Button
Rear Window Defogger
Make sure the rear window is clear and you have good visibility before starting to drive.
The defogger wires on the inside of the rear window can be accidentally damaged. When cleaning the glass, always wipe side-to-side.
Pushing this button also turns the mirror heaters on or off. For more information, see page
156
Push the button between the center vents to turn on the hazard warning lights (four-way flashers). This causes all four outside turn signals and both indicators in the instrument panel to flash. Use the hazard warning lights if you need to park in a dangerous area near heavy traffic, or if your vehicle is disabled.
The rear window defogger will clear fog, frost, and thin ice from the window. Push the defogger button to turn it on and off. The indicator in the button lights to show the defogger is on. If you do not turn it off, the defogger will shut itself off after about 15 minutes. It also shuts off when you turn off the ignition. You have to turn it on again when you restart the vehicle.
122
2008 MDX ０７／０７／０９ ０９：３８：０５ ３１ＳＴＸ６１０ ０１２８
Instrument Panel Brightness
To reduce glare at night, the instrument panel illumination dims when you turn the light switch to . To cancel the glare
or
reduction function, set the brightness to the highest level, then press the button. You will hear a beep when it is canceled.
＋
−
button. Press the
Adjust the brightness of the instrument panel by pressing the or increase the brightness and the button to decrease it. You can adjust the brightness with the headlight switch on or off.
＋ button to −
＋
You can customize when the glare reduction function starts. To change ‘‘AUTO INTERIOR ILLUMINATION’’, see page more information.
for
95
The level of brightness is shown on the multi-information display while you adjust it. It goes out 5 seconds after you finish adjusting.
123
2008 MDX ０７／０７／０９ ０９：３８：１１ ３１ＳＴＸ６１０ ０１２９
Steering Wheel Adjustments
Make any steering wheel adjustment before you start driving.
ADJUSTMENT SWITCH
Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the vehicle is stopped.
Move the steering wheel in, out, up, or down by pushing and holding the adjustment switch in that direction.
Release the switch when the steering wheel reaches the desired position. Make sure the steering wheel points towards your chest, not toward your face, and that you can see the instrument panel gauges and indicators.
124
2008 MDX ０７／０７／０９ ０９：３８：１７ ３１ＳＴＸ６１０ ０１３０
Steering Wheel Adjustments
When you remove the key from the ignition switch, the steering wheel automatically moves fully in and up.
To change the ‘‘AUTO TILT & TELESCOPE STEERING WHEEL’’ setting, see page
99
The steering wheel then returns to its original position when you insert the key back in the ignition switch.
Steering wheel movement is also controlled by the driving position memory system (see page ).
157
If your vehicle’s battery is disconnected or goes dead, or the fuse for the power tilt and telescopic steering wheel is removed, the power tilt and telescopic steering wheel system needs to be reset when you reconnect the battery or install the fuse.
Insert the key into the ignition switch, and remove it. The steering wheel automatically moves fully in and up to let you know the system is reset.
125
2008 MDX ０７／０７／０９ ０９：３８：２５ ３１ＳＴＸ６１０ ０１３１
Keys and Locks
KEY NUMBER TAG
MASTER KEY WITH REMOTE TRANSMITTER
VALET KEY (Light Gray)
KEY NUMBER TAG
MASTER KEY WITH REMOTE TRANSMITTER
VALET KEY (Light Gray)
MDX, Technology, and Sport Packages models shown. The master key fits all the locks on your vehicle. The valet key works only in the ignition and the driver’s door lock. You can keep the glove box locked when you leave your vehicle and the valet key at a parking facility.
U.S. Entertainment Packages and Canadian Elite Package models shown. You should have received a key number tag with your keys. You will need this key number if you ever have to get a lost key replaced. Use only Acura-approved key blanks.
126
These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the circuits are damaged.
Protect the keys from direct sunlight, high temperature, and high humidity.
Do not drop the keys or set heavy objects on them.
Keep the keys away from liquids. If they get wet, dry them immediately with a soft cloth.
The valet key does not contain a battery. Do not try to take it apart.
2008 MDX ０７／０７／０９ ０９：３８：３１ ３１ＳＴＸ６１０ ０１３２
RetractableMasterKey
RELEASE BUTTON
Push
Always use the fully-extended key when you insert it to the ignition switch. If the key does not fully extend, the immobilizer system may not operate properly and prevents from starting the engine.
The key may come in contact with your finger while being retracted or extended. Make sure your fingers do not touch the pivot of the key when retracting or extending the key.
Keys and Locks
U.S. Entertainment Packages and Canadian Elite Package models shown.
The master key can be retracted into the remote transmitter. To use the key, push the release button to release the key from the transmitter. The key should be fully extended. To retract the key, push the release button and at the same time push the key into the remote transmitter until it is securely latched.
127
2008 MDX ０７／０７／０９ ０９：３８：３９ ３１ＳＴＸ６１０ ０１３３
Immobilizer System
The Immobilizer System protects your vehicle from theft. If an improperly-coded key (or other device) is used, the engine’s fuel system is disabled.
When you turn the ignition switch to the ON (II) position, the immobilizer system indicator should come on briefly, then go off. If the indicator starts to blink, it means the system does not recognize the coding of the key. Turn the ignition switch to the LOCK (0) position, remove the key, reinsert it, and turn the ignition switch to the ON (II) position again.
The system may not recognize your key’s coding if another immobilizer key or other metal object (i.e. key fob) is near the ignition switch when you insert the key.
128
If the system repeatedly does not recognize the coding of your key, contact your dealer.
Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle undrivable.
If you have lost your key and you cannot start the engine, contact your dealer.
Always take the ignition key with you whenever you leave the vehicle alone.
AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.
Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.
ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.
2008 MDX ０７／０７／０９ ０９：３８：４７ ３１ＳＴＸ６１０ ０１３４
If the front wheels are turned, the anti-theft lock may make it difficult to turn the key. Firmly turn the steering wheel to the left or right as you turn the key.
−
You can
ACCESSORY (I) operate the audio system and the accessory power sockets in this position.
The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and START (III).
−
You can insert or
LOCK (0) remove the key only in this position. To turn the key to the LOCK (0) position, the shift lever must be in Park, and you must push the key in slightly.
−
This is the normal key
ON (II) position when driving. Several of the indicators on the instrument panel come on as a test when you turn the ignition switch from the ACCESSORY (I) to the ON (II) position.
−
Use this position
START (III) only to start the engine. The switch returns to the ON (II) position when you let go of the key.
Ignition Switch
You will hear a reminder beeper if you leave the key in the ignition switch in the LOCK (0) or the ACCESSORY (I) position and open the driver’s door. Remove the key to turn off the beeper.
The shift lever must be in Park before you can remove the key from the ignition switch.
129
2008 MDX ０７／０７／０９ ０９：３８：５７ ３１ＳＴＸ６１０ ０１３５
Door Locks
UNLOCK
LOCK
LOCK
UNLOCK
To lock all doors and the tailgate, press the bottom of the master door lock switch on either front door, pull the lock tab above the driver’s door handle, or use the key on the outside lock on the driver’s door.
Pressing the top of either master door lock switch will unlock all doors and the tailgate.
The lock tab on any passenger’s door locks and unlocks that door.
All doors and the tailgate can be locked from the outside by using the key in the driver’s door lock. To unlock only the driver’s door, insert the key, turn the key, and release it. The remaining doors and the tailgate unlock when you turn the key a second time within a few seconds.
130
To change the ‘‘KEY AND REMOTE UNLOCK MODE’’ setting, see page 109
When the vehicle speed reaches about 10 mph (about 15 km/h) or more, all the doors lock automatically.
To change the ‘‘AUTO DOOR 106
LOCK’’ setting, see pageWhen you shift to P after driving, the driver’s door unlocks.
To change the ‘‘AUTO DOOR UNLOCK’’ setting, see page
107
2008 MDX ０７／０７／０９ ０９：３９：０５ ３１ＳＴＸ６１０ ０１３６
LockoutPrevention With any door and the tailgate open and the key in the ignition, both master door lock switches are disabled. They are not disabled if all the doors and the tailgate are closed. If you try to lock an open driver’s door by pulling the lock tab rearward the lock tab on the driver’s door pops out.
Door Locks, Tailgate
Childproof Door Locks
Tailgate
LOCK
The childproof door locks are designed to prevent children seated in the rear from accidentally opening the rear doors. Each rear door has a lock lever near the edge. With the lever in the LOCK position (lever is down), the door cannot be opened from the inside regardless of the position of the lock tab. To open the door, push the lock tab forward and use the outside door handle.
To open the tailgate, push up inside the handle, then lift up. To close the tailgate, use the inner handle to pull it down, then press down on the back edge.
Keep the tailgate closed at all times while driving to avoid damaging the tailgate and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard 58
on page
131
2008 MDX ０７／０７／０９ ０９：３９：１２ ３１ＳＴＸ６１０ ０１３７
Tailgate
Power Tailgate
POWER TAILGATE SWITCH
U.S.EntertainmentPackagesand CanadianElitePackagemodels The tailgate can be opened and closed with the remote transmitter (see page ) or the switch in the driver’s door pocket when both front doors are unlocked.
135
132
Press and hold the tailgate button on the remote transmitter or the switch for about 1 second to open or close the tailgate. Each time you press the button on the remote transmitter or the switch, you will hear a beep, and some front and rear lights will flash.
If you push the same button or switch again while the tailgate is opening or closing, you will hear three beeps, and the tailgate will stop moving, reverse direction, and stop at the fully opened or closed position.
TAILGATE SWITCH
The tailgate can also be closed by pressing the button on the tailgate. If you press the button again while the tailgate is closing, you will hear three beeps, and the tailgate will stop moving, reverse direction, and stop at the fully opened position.
2008 MDX ０７／０７／０９ ０９：３９：２２ ３１ＳＴＸ６１０ ０１３８
Auto-Reverse The power tailgate has an auto- reverse feature. If it meets resistance while opening or closing, it will beep three times and reverse direction. However, the tailgate may not reverse immediately. Always make sure passengers and objects are clear of the tailgate before opening or closing it.
Closing a power tailgate while anyone is in the path of the tailgate can cause serious injury.
Make sure everyone is clear before closing the power tailgate.
Also check that passengers, especially children, do not have their hands on the edge of the tailgate or on the tailgate sill. The auto reverse feature stops working when the tailgate is about to latch so the motor can pull the tailgate shut.
If your vehicle’s battery is disconnected, goes dead, or the fuse is removed while the tailgate is fully open, the power tailgate needs to be reset. After connecting the battery or installing the fuse, close the tailgate fully by hand.
The power tailgate may not open or close under the these conditions:
The vehicle is parked on a steep hill.
When the vehicle is swayed in a strong wind.
Tailgate
When the tailgate or the roof is covered with snow or ice.
Do not install any accessories on the tailgate. It may cause the tailgate not to function properly. If there is snow or ice on the tailgate, make sure to remove it before you operate the tailgate.
If you push the tailgate release button inside the handle while the tailgate is opening or closing, it will stop moving. You need to open or close it the rest of the way manually.
The tailgate has sensors on both sides. Be careful not to damage them. If the sensors are damaged, the power tailgate does not function properly.
CONTINUED
133
2008 MDX ０７／０７／０９ ０９：３９：３１ ３１ＳＴＸ６１０ ０１３９
Tailgate
If you try to drive off with the tailgate not closed completely, a beeper sounds and a ‘‘DOOR & TAILGATE OPEN’’ message is shown on the multi-information display.
Unlocking the Tailgate
Keep the tailgate closed at all times while driving to avoid damaging the tailgate and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard 58
on page
If there is a problem in the power tailgate system, you will see a ‘‘CHECK POWER TAILGATE’’ message on the multi-information display. Have the system checked by your dealer.
With this message shown on the multi-information display, you can still open or close the tailgate manually.
134
U.S.EntertainmentPackagesand CanadianElitePackagemodels If the power door lock system cannot unlock the tailgate, unlock it manually.
Use a small flat-tipped screwdriver to remove the cover on the back of the tailgate.
Push the release lever to the right as shown.
If you need to unlock the tailgate manually, it means there is a problem with the tailgate. Have the vehicle checked by your dealer.
2008 MDX ０７／０７／０９ ０９：３９：３９ ３１ＳＴＸ６１０ ０１４０
Tailgate, Remote Transmitter
Remote Transmitter
MDX, Technology, and U.S. Sport Packages models
U.S. Entertainment Packages and Canadian Elite Package models
UNLOCK BUTTON
LOCK BUTTON
PANIC BUTTON
−
LOCK Press this button once to lock all doors and the tailgate. Some exterior lights will flash. When you push LOCK twice within 5 seconds, you will hear a beep to verify that the doors and tailgate are locked and the security system has set. This button does not work if any door or tailgate is not fully closed.
MDX,Technology,andU.S.Sport Packagesmodels If you cannot open the tailgate, remove the cover on the back of the tailgate (see page release lever to the right as shown, then pull the outer handle to open the tailgate.
). Push the
134
UNLOCK BUTTON
TAILGATE BUTTON
LOCK BUTTON
PANIC BUTTON
To change the ‘‘KEYLESS LOCK ACKNOWLEDGEMENT’’ setting, see page
110
CONTINUED
135
2008 MDX ０７／０７／０９ ０９：３９：４６ ３１ＳＴＸ６１０ ０１４１
Remote Transmitter
−
Press this button once
UNLOCK to unlock the driver’s door. Push it twice to unlock the other doors. Some exterior lights will flash twice when you push the button. If you do not open any door or the tailgate within 30 seconds, they will automatically relock.
To change the ‘‘KEY AND REMOTE UNLOCK MODE’’ setting, see page 109
To change the ‘‘SECURITY RELOCK TIMER’’ setting, see page 111
136
When you press the UNLOCK button, the front and rear individual map lights and the cargo area light, depending on their switch positions, will come on (see page ). If you do not open any door or the tailgate, the lights stay on for about 30
seconds, then go out. If you relock the doors and the tailgate with the remote transmitter before 30
seconds have elapsed, the lights will go off immediately.160
−
U.S.EntertainmentPackagesand CanadianElitePackagemodels TAILGATE Press and hold the TAILGATE button to open or close the power tailgate. When the tailgate begins to move, you will hear a beep, and some front and rear lights will flash.
If you push the same button again while the tailgate is opening or closing, three beeps sound, the tailgate stops moving, reverses
direction and stops in the fully opened or fully closed position.
−
Press and hold this
PANIC button for about 1 second to attract attention; the horn will sound, and the exterior lights will flash for about 30 seconds. To cancel panic mode, press any other button on the remote transmitter, or turn the ignition switch to the ON (II) position. Panic mode does not work when the key is in the ignition switch.
2008 MDX ０７／０７／０９ ０９：３９：５６ ３１ＳＴＸ６１０ ０１４２
RemoteTransmitterCare
Avoid dropping or throwing the transmitter. Protect the transmitter from extreme temperature. Do not immerse the transmitter in any liquid. If you lose a transmitter, the replacement needs to be reprogrammed by your dealer.
Replacing the Transmitter Battery If it takes several pushes on the button to lock or unlock the doors and the tailgate, replace the battery as soon as possible.
Battery type: CR1616
Remote Transmitter
SCREW
KEYPAD
To replace the battery:
1.
2.
Remove the screw at the base of the transmitter with a small Phillips-head screwdriver.
Separate the keypad from the transmitter by pushing any button from outside.
CONTINUED
137
2008 MDX ０７／０７／０９ ０９：４０：０４ ３１ＳＴＸ６１０ ０１４３
Remote Transmitter
4.
BATTERY
3.
Place a cloth on the edge of the keypad, and remove the upper half by carefully prying on the edge with a small flat-tip screwdriver.
138
Remove the old battery and note the polarity. Make sure the polarity of the new battery is the same ( insert it in the keypad.
side facing up), then
−
An improperly disposed of battery can hurt the environment. Always confirm local regulations for battery disposal.
5.
Snap the two halves of the keypad, then install the parts in reverse order.
AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.
Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.
ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.
2008 MDX ０７／０７／０９ ０９：４０：１５ ３１ＳＴＸ６１０ ０１４４
Keyless Memory Settings
TM
Here are the settings activated with the remote;
Customized settings (see page
83
).
Driving position memory (see page
157
).
When you unlock the driver’s door with your remote, each remote activates the keyless memory settings related to that remote. The driver’s ID (MEMORY 1 or MEMORY 2) is shown on the back of each remote.
Audio system settings (see page
200
).
Climate control settings (see page
171
).
When you unlock and open the driver’s door with the remote transmitter, the driver’s seat (except the power lumbar feature) and outside mirrors start to move to the positions stored in memory. The indicator in the related memory button to the remote comes on.
Remote Transmitter
The steering wheel will move to the stored position when you insert the key into the ignition switch.
You will also see the ‘‘WELCOME DRIVER 1’’ or ‘‘WELCOME DRIVER 2’’ message on the multi- information display, depending on which linked remote transmitter is used.
To turn off this feature, press and hold the LOCK and UNLOCK buttons at the same time. The LED in the remote will blink twice. Then release the buttons. Doing this cancels the keyless memory settings for that remote and restores the default settings.
To turn the keyless memory settings back on, repeat this procedure. The LED will blink once to indicate the feature has been turned on.
139
2008 MDX ０７／０７／０９ ０９：４０：２６ ３１ＳＴＸ６１０ ０１４５
Seats
−
12 14
Front Seat Power Adjustments Seepages forimportantsafety informationandwarningsabouthowto properlypositiontheseatsandseat- backs.
The controls for the power adjustable front seats are on the outside edge of each seat bottom. You can adjust the seats with the ignition switch in any position. Make all seat adjustments before you start driving.
The passenger seat has the same adjustments as the driver’s seat but without any lumbar adjustment.
140
Moves the seat forward and backward.
Moves the front of the seat up or down.
Raises or lowers the seat.
Moves the whole seat up and forward, or down and backward. The front of the seat also tilts up or down at the same time.
Adjusts the seat-back angle forward or backward.
Increases or decreases the lumbar support. (Driver’s seat only)
2008 MDX ０７／０７／０９ ０９：４０：３４ ３１ＳＴＸ６１０ ０１４６
Head Restraints Seepage forimportantsafety informationandawarningabout improperlypositioningheadrestraints.
14
Your vehicle is equipped with head restraints in all seating positions to help protect you and your passengers from whiplash and other injuries.
They are most effective when you adjust them so the center of the back of the occupant’s head rests against the center of the restraint.
Seats
CUSHION
FRONT
SEAT- BACK
LEGS
RELEASE BUTTON
AdjustingtheHeadRestraint The head restraints adjust for height. You need both hands to adjust the restraint. Do not attempt to adjust it while driving. To raise it, pull upward. To lower the restraint, push the release button sideways, and push the restraint down.
CONTINUED
141
2008 MDX ０７／０７／０９ ０９：４０：４０ ３１ＳＴＸ６１０ ０１４７
When reinstalling a head restraint, put the legs back in place. Then adjust it to the appropriate height while pressing the release button.
Make sure the head restraint locks in position when you reinstall it.
Failure to reinstall the head restraints can result in severe injury during a crash.
Always replace the head restraints before driving.
Seats
SECOND CENTER AND THIRD ROW CUSHION
LEGS
RELEASE BUTTON
RemovingtheHeadRestraint To remove a head restraint for cleaning or repair, pull it up as far as it will go. Push the release button, then pull the restraint out of the seat- back.
142
2008 MDX ０７／０７／０９ ０９：４０：４９ ３１ＳＴＸ６１０ ０１４８
Seats
This reduces the distance between the restraint and the occupant’s head. It also helps protect the occupants against whiplash and injuries to the neck and upper spine.
After a collision, the activated restraint should return to its normal position.
If the restraints do not return to their normal position, or in the event of a severe collision, have the vehicle inspected by an Acura dealer.
For a head restraint system to work properly:
Do not hang any items on the head restraints, or from the restraint legs.
Do not place any object between an occupant and the seat-back.
Install each restraint in its proper location.
Only use genuine Acura replacement head restraints.
ActiveHeadRestraints
The driver’s and front passenger’s seats have active head restraints. If the vehicle is struck severely from the rear, the occupant properly secured with the seat belt will be pushed against the seat-back and the head restraint will automatically move forward.
CONTINUED
143
2008 MDX Make sure that the folded seat-back does not press against the front passenger’s seat, as this could cause the weight sensors to work improperly.
０７／０７／０９ ０９：４０：５９ ３１ＳＴＸ６１０ ０１４９
Seats
Adjusting the Second Row Seats
Folding the Second Row Seats The left and right halves can be folded separately.
1.
To unlatch the detachable anchor before folding the seat-back, insert the latch plate into the slot on the side of the anchor buckle (see page to retract. Store the detachable anchor and seat belt latch plates in the retractor housing.
) and allow the seat belt
146
2.
Lower the head restraints to their lowest positions.
3.
Pull up the handle on the outside of the seat-back.
4.
Fold the seat-back forward.
Reverse this procedure to return the seat to the upright position. Make sure the seat is locked securely before driving.
HANDLE
To change the seat-back angle of the seats in the second row, pull up on the handle on the outside of the seat- back, and push the seat-back.
Overall, the seat-back has six different positions.
144
2008 MDX ０７／０７／０９ ０９：４１：０８ ３１ＳＴＸ６１０ ０１５０
Folding the Third Row Seat 1.
Use the latch plate to release the seat belt from the detachable anchor (see page
146
).
2.
Lower the head restraints to their lowest positions.
To fold the third row seat, NOTE: the second row seat-back must be folded down or in the full up right position.
Third Row Access
RELEASE LEVER
To get into the third row seats, pull up the lever on the side of the passenger’s side second row seat- back. The seat-back will tilt forward, and then can be slid forward.
After you return the seat-back to the upright position, push the whole seat backwards until it latches. Make sure the seat is fully latched before sitting in it.
Seats
THIRD SEAT
HANDLE
3.
Unlock the seat-back by pulling the handle. Push the seat-back forward.
Make sure the outer shoulder belts are positioned on each hook on the side panel whenever the third seat is folded.
CONTINUED
145
2008 MDX ０７／０７／０９ ０９：４１：１５ ３１ＳＴＸ６１０ ０１５１
Seats
Reverse this procedure to return the seat to the upright position. Make sure the seat is locked securely before driving. Reconnect the seat belts to the detachable anchors.
Detachable Anchor
Make sure all items in the cargo area are secured. Loose items can fly forward and cause injury if you have Carrying Cargo to brake hard (See on page
332
).
LATCH PLATE
The seat belts in the second row center seat and the third row seats are equipped with detachable anchors.
To unlatch the detachable anchor, insert the latch plate into the slot on the side of the anchor buckle. Store the detachable anchor and seat belt latch plates in the retractor housing.
146
When the seats are returned to the upright position, these detachable anchors should be latched back properly.
Using a seat belt with the detachable anchor unlatched increases the chance of serious injury or death in a crash.
Before using the seat belt, make sure the detachable anchor is correctly latched.
2008 MDX ０７／０７／０９ ０９：４１：２３ ３１ＳＴＸ６１０ ０１５２
SECOND ROW CENTER SEAT
THIRD ROW SEATS
LATCH PLATE
Seats
SMALL LATCH PLATE
SMALL LATCH PLATE
HOOK
ANCHOR BUCKLE
TRIANGLE MARKS
Pull out the small latch plate and the latch plate from each holding slot in the ceiling, and pull out the seat belt to extend it.
Pull out the outer shoulder belts from the hook. Both of the third-row hooks should only be used when the seat belt is detached.
Line up the triangle marks on the small latch plate and anchor buckle when reattaching the belt and buckle.
Tug on the seat belt to verify that the detachable anchor is securely latched. Make sure the seat belt is not twisted.
147
2008 MDX ０７／０７／０９ ０９：４１：３０ ３１ＳＴＸ６１０ ０１５３
Seat Heaters
Passenger’s Seat
HI
HEATERS
Driver’s Seat
Front seat
LOW
Second row seat
Both front seats are equipped with seat heaters. Because of the sensors for the side airbag cutoff system, there is no heater in the passenger’s seat-back. The ignition switch must be in the ON (II) position to use the heaters.
Push the front of the switch, HI, to rapidly heat up the seat. After the seat reaches a comfortable temperature, select LO by pushing the back of the switch. This will keep the seat warm.
U.S.EntertainmentPackagesand Canadianmodels The outer second row seat cushions and seat-backs are equipped with seat heaters. Turning the switch on the driver side warms the outer seat behind the driver’s seat only. The passenger side switch warms the outer seat behind the front passenger seat.
148
2008 MDX ０７／０７／０９ ０９：４１：４０ ３１ＳＴＸ６１０ ０１５４
In the HI setting, the heater turns off when the seat gets warm, and turns back on after the seat’s temperature drops.
In the LO setting, the heater runs continuously. It does not cycle with temperature changes.
Follow these precautions when using the seat heaters:
Use the HI setting only to heat the seats quickly, because it draws large amounts of current from the battery.
If the engine is left idling for an extended period, do not use the seat heaters even on the LO setting. It can weaken the battery, causing hard starting.
Seat Heaters, Power Windows
Power Windows
DRIVER’S WINDOW SWITCH
MAIN SWITCH
The windows will operate for up to 10 minutes after you turn off the ignition switch. Opening either front door cancels this function.
Turn the ignition switch to the ON (II) position to raise or lower any window. To open a window, push the switch down and hold it. Release the switch when you want the window to stop. Pull back on the switch and hold it to close the window.
Closing a power window on someone’s hands or fingers can cause serious injury.
Make sure your passengers are away from the windows before closing them.
−
AUTO To open either front window fully, push the window switch firmly down to the second detent, then release it. The window automatically goes down all the way. To stop the window from going all the way down, pull back on the window switch briefly.
CONTINUED
149
2008 MDX ０７／０７／０９ ０９：４１：４７ ３１ＳＴＸ６１０ ０１５５
Power Windows
To close either front window fully, pull back the window switch firmly to the second detent, then release it. The window automatically goes all the way up. To stop the window from going all the way up, push down on the window switch briefly.
−
AUTO REVERSE If either front window senses any obstacle while it is closing automatically, it will reverse direction and then stop. To close the window, remove the obstacle, then use the window switch again.
When you push the MAIN switch in, the switch is off, and the passengers’ windows cannot be raised or lowered. To cancel this feature, push on the switch again to get it to pop out. Keep the MAIN switch pushed in when you have children in the vehicle so they do not injure themselves by operating the windows unintentionally.
Auto reverse stops sensing when the window is almost closed. You should always check that all passengers and objects are away from the window before closing it.
If your vehicle’s battery is disconnected or goes dead, or the driver’s window fuse is removed, the AUTO function may be disabled. If the AUTO function is disabled, the power window system will need to be reset after reconnecting the battery or installing the fuse.
1.
2.
Start the engine. Push down and hold the driver’s window switch until the window is fully open.
Pull and hold the driver’s window switch to close the window completely, then hold the switch for about 2 seconds.
If the power windows do not operate properly after resetting, have your vehicle checked by your dealer.
150
2008 MDX ０７／０７／０９ ０９：４２：０１ ３１ＳＴＸ６１０ ０１５６
Opening/Closing the Windows and Moonroof with the Key
Opening the Windows and Moonroof with the Remote Transmitter You can open all of the windows and the moonroof from outside with the remote transmitter. 1.
Press the UNLOCK button once to unlock the driver’s door.
2.
3.
Press the UNLOCK button a second time, and hold it. All the doors unlock, and all four windows and moonroof start to open. To stop the windows and moonroof, release the button.
To open the windows and moonroof further, press the button again (within 10 seconds of step 1) and hold it. If the windows and the moonroof stop before the desired position, repeat steps 1
and 2.You cannot close the windows or the moonroof with the remote transmitter.
You can open and close the windows and moonroof with the key in the driver’s door lock. To open: 1.
Insert the key in the driver’s door lock.
2.
Turn the key clockwise, then release it.
Power Windows
3.
Turn the key clockwise again, and hold it. All four windows and the moonroof start to open. To stop the windows and the moonroof, release the key.
4.
To open the windows and the moonroof further, turn and hold the key again (within 10 seconds of step 2).
To close: 1.
Insert the key in the driver’s door lock.
2.
Turn the key counterclockwise, then release it.
3.
Turn the key counterclockwise again, and hold it. All four windows and the moonroof start to close. To stop the windows and the moonroof, release the key.
CONTINUED
151
2008 MDX ０７／０７／０９ ０９：４２：０９ ３１ＳＴＸ６１０ ０１５７
Moonroof
Power Windows, Moonroof
4.
To close the windows and the moonroof further, turn and hold the key again (within 10 seconds of step 2).
Auto reverse does not work when closing the windows and moonroof with the key.
NOTE: If the windows and the moonroof stop before the desired position, repeat steps 2 and 3.
MOONROOF SWITCH
To open the moonroof fully, pull back the moonroof switch firmly. The moonroof opens all the way. To stop the moonroof from opening fully, push the switch briefly.
To tilt up the moonroof, push on the center of the moonroof switch. To stop the moonroof from tilting up fully, push the switch briefly.
To close the moonroof fully, firmly push the moonroof switch forward, then release it. The moonroof automatically closes all the way. To stop the moonroof from closing, push the switch briefly.
To open or close the moonroof partially, pull back or push forward the moonroof switch lightly and hold it. The moonroof will stop when you release the switch.
152
2008 MDX ０７／０７／０９ ０９：４２：１８ ３１ＳＴＸ６１０ ０１５８
Moonroof, Parking Brake
Auto Reverse If the moonroof runs into any obstacle while it is closing automatically, it will reverse direction, and then stop. To close the moonroof, remove the obstacle, then use the moonroof switch again.
You can open and close the moonroof for up to 10 minutes after you turn off the ignition switch. Opening either front door cancels this function.
Parking Brake
RELEASE HANDLE
Auto reverse stops sensing when the moonroof is almost closed. You should always check that all passengers and objects are away from the moonroof before closing it.
If you try to open the moonroof in below-f reezing temperatures, or when it is covered with snow or ice, you can damage the moonroof panel or its motor.
PARKING BRAKE PEDAL
Opening or closing the moonroof on someone’s hands or fingers can cause serious injury.
Make sure all hands and fingers are clear of the moonroof before opening or closing it.
To apply the parking brake, push the pedal down with your foot. To release it, pull the release handle fully. The parking brake indicator on the instrument panel should go out when the parking brake is fully released (see page
65
).
You will also see a ‘‘RELEASE PARKING BRAKE’’ message on the multi-information display (see page 81
CONTINUED
).
153
2008 MDX ０７／０７／０９ ０９：４２：２４ ３１ＳＴＸ６１０ ０１５９
Parking Brake, Mirrors
Driving the vehicle with the parking brake applied can damage the rear brakes and axles. A beeper will sound if the vehicle is driven with the parking brake on.
Mirrors Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before you start driving.
SENSOR
INDICATOR
AUTO BUTTON
The inside mirror can automatically darken to reduce glare. To turn on this feature, press the button on the bottom of the mirror. The AUTO indicator comes on as a reminder. When it is on, the mirror darkens when it senses the headlights of a vehicle behind you, then returns to normal visibility when the lights are gone. Press the button again to turn off this feature.
154
2008 MDX ０７／０７／０９ ０９：４２：３１ ３１ＳＴＸ６１０ ０１６０
Adjusting the Power Mirrors
There is also a sensor on the back of the mirror. Items hung on the mirror may block this sensor and af f ect its perf ormance.
SELECTOR SWITCH
1.
Turn the ignition switch to the ON (II) position.
2.
Move the selector switch to L (driver’s side) or R (passenger’s side).
Mirrors
3.
4.
Push the appropriate edge of the adjustment switch to move the mirror right, left, up, or down.
When you finish, move the selector switch to the center (off) position. This turns the adjustment switch off to keep your settings.
155
2008 MDX ０７／０７／０９ ０９：４２：３８ ３１ＳＴＸ６１０ ０１６１
Mirrors
Reverse Tilt Door Mirror Both outside door mirrors have a reverse tilt feature. When in reverse, the selected mirror will tilt down slightly to improve your view as you parallel park. Shifting out of reverse will return the mirrors to their original position.
To tilt the driver’s mirror, place the selector switch in the left position.
To tilt the passenger’s mirror, place the switch in the right position.
To turn the feature off, place the switch in the center position.
Outside mirror positions can be stored in the driving position memory system (see page
157
).
156
Heated Mirrors
HEATED MIRROR BUTTON
The outside mirrors are heated to remove fog and frost. With the ignition switch in the ON (II) position, turn on the heaters by pressing the button. The indicator in the button comes on as a reminder. Press the button again to turn the heaters off. Pressing this button also turns the rear window defogger on and off.
2008 MDX ０７／０７／０９ ０９：４２：４７ ３１ＳＴＸ６１０ ０１６２
Your vehicle has a memory feature for the steering wheel, driver’s seat, and outside mirror positions.
Seat, except for power lumbar, steering wheel and outside mirror positions can be stored in separate memories. You select a memorized position by pushing the appropriate button or using the appropriate remote transmitter (Driver 1 or Driver 2). For more information see page
139
Driving Position Memory System
Storing a Driving Position in Memory Store a driving position only when the vehicle is parked.
MEMORY BUTTONS
1.
2.
Turn the ignition switch to the ON (II) position. You cannot add a new driving position to the memory unless the ignition switch is in the ON (II) position. You can recall a memorized position with the ignition switch in any position.
).
140
Adjust the seat to a comfortable position (see page Adjust the steering wheel to a comfortable position (see page 124
Adjust the outside mirrors for best visibility (see page155
).
).
