Login Home > Miscellaneous > Ad# 2482217
""SNAP"" ""SNAP"" Multimeter
Camberwell VIC 3124 (Melbourne)
""SNAP"" ""SNAP"" Multimeter- $80 Negotiable
This item was listed over six months ago, please confirm with the seller whether it is still available for sale.
Brief Details
- Price
- $ 80 Negotiable
- Condition
- Good
- Delivery
- PickUp
Sellers Description
For sale is a Snap-on Blue-point EEDM503A.
This unit is in great working order and condition, is very clean and comes with its snap-on test probes. This is a good quality unit capable of alot of features.
All offers welcome, just note this is a Snap-on product so i'm not going to just give it away.
Overview
Description:
EEDM503C Manual Ranging DMM Includes:
Standard Accessories
* 2 Amp Ceramic, UL Fuse
* 10 Amp Ceramic, UL Fuse
* Test Lead Set
* Rubber Boot
* 9-volt Battery (installed)
General Specifications:
Max. Voltage between any Input and Ground: 1000V
Fuse Protection mA: 2Amp/600VAC
Fuse Protection A: 10Amp/600VAC
Display Type: 2000 Count
Operating Temperature: -0 to 40C (32 to 104F)
Storage Temperature: -10 to 50C (14 to 122F)
Relative Humidity: 0% to 80%
Power Supply: 9 Volt Battery
Battery Life: 560 hrs. Alkaline
Size (H x L x W): 1.5" x 3.75" x 7.7" (38.1mm x 95.25mm x196.85mm)
Weight: 24 oz. (680 grams)
Applications:
* Diagnose electrical and powertrain systems.
* Measure capacitors in the inverter/rectifier.
* Follow manufacturer's instructions closely to avoid electrical shock.
Features:
* LCD DISPLAY - Large 2,000 count LCD display.
* ON/OFF PUSH BUTTON - Push to turn the EEDM503A on and off.
* OHM - Measure Ohms to determine resistance of a coil or spark plug wire.
* CONTINUITY BUZZER - Test continuity of fuses, fusible links, components and circuits.
* DIODE TEST - Use the diode function to test the diode pack on a typical alternator.
* DC AMPS - Measure DC current to determine the presence of a parasitic load. Measure current draw of branch circuits.
* DATA-H (Data Hold) - Lock reading on the display in hard to read locations or for future reference.
* DC VOLTS - Use DC voltage to verify if the proper voltage level is arriving at a sensor of circuit.
* AC VOLTS - Measure AC voltage signals on digital MAF sensors, wheel speed sensors and vehicle speed sensors.
* AC AMPS - Measure the current draw of AC powered equipment in the shop.
* TILT STAND - Is built-in into the instrument housing.
* SEPARATE FUSE/BATTERY COMPARTMENT - Is easily removed for battery/fuse replacement. Fuses are labelled with replacement number.
This unit is in great working order and condition, is very clean and comes with its snap-on test probes. This is a good quality unit capable of alot of features.
All offers welcome, just note this is a Snap-on product so i'm not going to just give it away.
Overview
Description:
EEDM503C Manual Ranging DMM Includes:
Standard Accessories
* 2 Amp Ceramic, UL Fuse
* 10 Amp Ceramic, UL Fuse
* Test Lead Set
* Rubber Boot
* 9-volt Battery (installed)
General Specifications:
Max. Voltage between any Input and Ground: 1000V
Fuse Protection mA: 2Amp/600VAC
Fuse Protection A: 10Amp/600VAC
Display Type: 2000 Count
Operating Temperature: -0 to 40C (32 to 104F)
Storage Temperature: -10 to 50C (14 to 122F)
Relative Humidity: 0% to 80%
Power Supply: 9 Volt Battery
Battery Life: 560 hrs. Alkaline
Size (H x L x W): 1.5" x 3.75" x 7.7" (38.1mm x 95.25mm x196.85mm)
Weight: 24 oz. (680 grams)
Applications:
* Diagnose electrical and powertrain systems.
* Measure capacitors in the inverter/rectifier.
* Follow manufacturer's instructions closely to avoid electrical shock.
Features:
* LCD DISPLAY - Large 2,000 count LCD display.
* ON/OFF PUSH BUTTON - Push to turn the EEDM503A on and off.
* OHM - Measure Ohms to determine resistance of a coil or spark plug wire.
* CONTINUITY BUZZER - Test continuity of fuses, fusible links, components and circuits.
* DIODE TEST - Use the diode function to test the diode pack on a typical alternator.
* DC AMPS - Measure DC current to determine the presence of a parasitic load. Measure current draw of branch circuits.
* DATA-H (Data Hold) - Lock reading on the display in hard to read locations or for future reference.
* DC VOLTS - Use DC voltage to verify if the proper voltage level is arriving at a sensor of circuit.
* AC VOLTS - Measure AC voltage signals on digital MAF sensors, wheel speed sensors and vehicle speed sensors.
* AC AMPS - Measure the current draw of AC powered equipment in the shop.
* TILT STAND - Is built-in into the instrument housing.
* SEPARATE FUSE/BATTERY COMPARTMENT - Is easily removed for battery/fuse replacement. Fuses are labelled with replacement number.
Sellers Details
-
- Seller
- StevieUnwired
- Location
- Camberwell VIC 3124
-
- My Favourite Ads
-
- Save your favourite ads to create a shortlist
- Recently Viewed Ads
-
- You have no recently viewed ads
Loading...
x