Hyundai Excel Racing Series - Track Attack - Evil things are about to happen to Hyundai Excels  

Page 29 of 53
Jump to page
NISMOgemini
Post #1001

will they have cages?

trackattack
Post #1002

yep, Fully prepped with cages, seat, harness etc
suspension and tyres etc to series requirements

trackattack
Post #1003

April Tyre list visit here - http://www.trackattack.com.au/2010/index.p...&Itemid=468

zuboo
Post #1004

I know of a XL in great running conduction few dents on panels nothing major, only has a knock from the left CV which is an easy fix, $500 with rego Pm me if any one chasing i was going to pick it up to race with, but im going to wait to they start racing topgear

MD0086
Post #1005

QUOTE (zuboo @ Apr 24 2010, 01:13 PM) *
I know of a XL in great running conduction few dents on panels nothing major, only has a knock from the left CV which is an easy fix, $500 with rego Pm me if any one chasing i was going to pick it up to race with, but im going to wait to they start racing topgear


Registerable Dan?

zuboo
Post #1006

yep comes with safety certificate, im sure you have my number if not pm me,

trackattack
Post #1007

QUOTE (zuboo @ Apr 24 2010, 02:13 PM) *
im going to wait to they start racing topgear


We should see a few Excels out at Lakeside racing on the 23rd May at Topgear.

benno.h
Post #1008

QUOTE (trackattack @ Apr 25 2010, 06:11 AM) *
We should see a few Excels out at Lakeside racing on the 23rd May at Topgear.



Pork Hunt should be there, albeit without me. Who else is circuit ready at this stage?

Beannie
Post #1009

would love to, but a few large expenses lately so i cant get the car up to scratch for it :P

PRO050
Post #1010

QUOTE (benno.h @ Apr 25 2010, 12:31 PM) *
Pork Hunt should be there, albeit without me. Who else is circuit ready at this stage?

If there is a far few I'll race my $100 special, if not I race the falcon.
Cheers Paul

PRO050
Post #1011

Just remember you can do the Top Gear big weekend which is Saturday practice, Saturday arvo sprints and the racing on Sunday.
I think you get a discount if you do all of them.
Jeff you may want to confirm this.
Cheers Paul

trackattack
Post #1012

I will definitely have one car ready,
I have a lot of the gear here ready to fit to the excel,but time is a killer at the moment.

Yeah its cheaper to enter the 3 events for the weekend on one entry than enter the 3 of them separately ($320, late entries not accepted).
Circuit Racing entry is $200 if you get in early or $240 late

PRO050
Post #1013

QUOTE (trackattack @ Apr 25 2010, 03:03 PM) *
I will definitely have one car ready,
I have a lot of the gear here ready to fit to the excel,but time is a killer at the moment.

Yeah its cheaper to enter the 3 events for the weekend on one entry than enter the 3 of them separately ($320, late entries not accepted).
Circuit Racing entry is $200 if you get in early or $240 late

What date is the cut off for the big weekend, can I pay and decide later what car I'm going to run.

trackattack
Post #1014

QUOTE (PRO050 @ Apr 25 2010, 04:15 PM) *
What date is the cut off for the big weekend, can I pay and decide later what car I'm going to run.


1 week before, so entry form in on the 15th. swapping cars shouldn't be a problem, class will be the same QR sedans.
http://www.queenslandraceway.com.au/pdf/r_...Form%202010.pdf

benno.h
Post #1015

How many cages have you done now Paul?

PRO050
Post #1016

QUOTE (benno.h @ Apr 26 2010, 02:26 PM) *
How many cages have you done now Paul?

I think it's 6 half cages and 2 full cages for the excel guys, and add one more for my little excel that I'll do next week.

Beannie
Post #1017

paul, are you making cages for the excels? (sorry if i didnt see a previous post)
can you pm me some prices?? :o because i want to keep the car road rego'd - i think 6point are illegal on the road? (correct me if im wrong?)
so i'd be interested in something like a 4point fixed or bolt in, but also can bolt up to 6point (if thats legal for road and for the circuit racing series)...

Beannie
Post #1018

i received my camber bolts today, fitted them to top strut bolt, also elongated the top bolt hole to acheive some more camber (dunno if this is ideal or not), and left bottom bolt as standard. adjusted the toe in as it was pretty bad and all done! i think i have about 3-3.5deg neg camber. took it for a drive - makes a noticeable difference :o

looks good - but still have stock springs in it :D might have to look at this issue too

slow bus
Post #1019

With camber bolts top and bottom I have about 4.6

trackattack
Post #1020

Camber will help cornering heaps.
I also have caster kits (bushes) available as well now.

Beannie
Post #1021

just out of curiosity, will lowering the car make more neg camber with the suspension setups excels use? i would assume it would.. by a little bit yeah?

NISMOgemini
Post #1022

on the front it will.. not sure what kind of rear suspension they have.. if its axel beam then it wont on the rear

clutch-monkey
Post #1023

are we going to see any of these excels down at superlap :o

slow bus
Post #1024

QUOTE (trackattack @ Apr 27 2010, 08:21 PM) *
Camber will help cornering heaps.
I also have caster kits (bushes) available as well now.


100% agree no point in running camber if you dont have the caster as well. I have poly offset bushes already.

New struts should arrive in the next couple of days, so should be good for May, although the outside of the car is still a mess.

I will be running monroe fronts and kyb rears, lovell rear springs and unknown front springs.

trackattack
Post #1025

Its good to see a few guys getting the handling side of things sorted.
The softer tyres have likely been suffering wear issues due to the road setup that a lot of people started with.
We might find that we can make a grippy tyre last a lot longer than they have been.

benno.h
Post #1026

QUOTE (trackattack @ Apr 28 2010, 09:59 AM) *
Its good to see a few guys getting the handling side of things sorted.
The softer tyres have likely been suffering wear issues due to the road setup that a lot of people started with.
We might find that we can make a grippy tyre last a lot longer than they have been.


We're running -2.3º camber (max we could get from single adjustable camber pin) and still killing the shoulders on our tyres.

Here's a pic from Lakeside last week:

trackattack
Post #1027

22mm Front swaybars are now available, takes about 2 weeks to get them made.

trackattack
Post #1028

Sprints are on again Sunday 16th May at Lakeside Raceway.
All you need is a normal road car, long clothes and a helmet.

This is also the day of the Monster Car Show and Muscle Car Sprints
The Excel Series is also running on the 16th, check out the cheapest form of motorsport in the world !

More info follow this link - http://www.trackattack.com.au/sprints

Cheers Jeff
http://www.trackattack.com.au


Chunk
Post #1029

hmm... wishing there were a bit more parts availability for the old x2 now... doh!

trackattack
Post #1030

try qld hyundai parts or allbrand wrecking.
both are offering discounts to excel series cars.

Chunk
Post #1031

I was more referring to upgradable items such as swaybars

Replacement standard parts, yeah.. no probs :thumbsup:

trackattack
Post #1032

Send me a list of what you need and I will see what I can get.
we can definitely get springs and swaybars.

Chunk
Post #1033

cheers.. mainly after the swaybars. Springs I have sorted.

trackattack
Post #1034

Hire an Excel race Car through Mounfield Racing- $400 including entry fees and consumables.
Follow this link - http://www.trackattack.com.au/2010/index.p...;product=679980
Cheers Jeff

trackattack
Post #1035

I have found some more new wheels if anybody needs any - $105 per wheel pick up from Springwood.

Lotus - 15 x 6.5 - 4x114 38P
Profin - 15 x 6.0 - 4 x114 46P


Lotus Profin

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 29 of 53
Jump to page
72 User(s) are reading this topic (72 Guests and 0 Anonymous Users)
0 Members:
Loading...
x