#1
2nd November 2004 - 12:17 PM
Post |
|
---|---|
Hi guys, I am soon to be embarking on an R32 GTS-t RB25DET conversion which will be done in my driveway with a couple of mates. I have an R33 GTS-25t half cut on the way. My biggest problem is deciding on what engine management to choose and what wiring loom and harness to use. I have heard rumours that you can use the RB20DET wiring loom and harness with the RB20DET factory ECU providing it has a remap. Is this true? This sounds like a great idea as you would not have problems with any of your ancillaries working. But my concern is the RB25'S VCT? Another option to consider would be splicing the RB20DET loom into an RB25DET harness mounted with an aftermarket RB25DET ECU (eg, Power FC) as there is no point using the RB25DET Factory ECU. If this is even possible due to the different pin outs. I mean basically, If i have to re-wire the entire car, i don't mind. I just want some sort of assurance that it is possible to get everything to work eventually. Some advice from someone with experience would be great. Cheers fellas. This post has been edited by gtst89: Nov 2 2004, 12:18 PM -------------------- Its all about the chop chop!
|
S14a_On_Boost
Post #3
Sounds like a bit of a disaster in the making, perhaps consult a professional before you start |
---|
SupraCrazy
Post #4
There's..... |
---|
No need to be negative buddy, these things aren't meant to be easy. Anyways, I've written to 3 different performance workshops. Non of them have replied yet. Can anyone pass on some email address for different workshops that have very strong Nissan engine knowledge and experience so that I can ask them for advice on this issue? |
---|
BoostedS15
Post #7
why not use the R33 wiring harness and use a Microtec Plug n Play LT12-S. or alternativly a Wolf Plug N Play VR4. |
---|
You will have to splice the rb20/25 loom and the rb25 ECU. I have a mate that can do these looms and knows his rb wiring. So PM me if you are interested |
---|
gtr90
Post #9
Ok let's clear a few things up. |
---|
Does the mechanical 'sender' off the old gearbox fit in the new one? You could update the dash to full electrical. |
---|
pipster11
Post #13
http://www.skylinesaustralia.com/forums/Rb...de-t119865.html |
---|
darthvieder
Post #14
wonderful! thanks for the info.. commission de surendettement - commission de surendettement, vous pouvez demander un dossier de surendettement. |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!