#1
13th February 2003 - 10:19 PM
Post |
|
---|---|
heya me mates thinkin of puttin a twin turbo 300zx engine into his 97 nissan pathfinder 4x4 personally i think its a great idea and the engine bays r verry simular so the only problem i c is the 4x4 part, wotchas think?
|
sir31
Post #2
the pathfinder did come out 4wd V6. (VG30E) So just need to find the right bell houseing, But check the width of the twin cam turbo engine (VG30dett) frist they are wider then you many think. Maybe go for the Vg30det still 4 cam but single turbo. A lot cheaper to buy to. |
---|
pegasus
Post #4
The engine has nothing to do with the actual 4x4 part..... Thats all taken care of with the gearbox/transfer case...... |
---|
pegasus
Post #7
U will have a lot of trouble seperating the transfer case from the gearbox. If you want to keep it 4wd, you will have to have a gearbox - transfer case adapter made (to change gearbox), as well as having both the front and rear drive shafts changed in length. You may also need to have a look at the handbrake, because I believe also in the pathfinder its a drum attached to the rear tail shaft. |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!