#1
11th December 2002 - 12:54 PM
Post |
|
---|---|
ok my injectors will fire twice then cut out. then i have to turn the key to the off piosisiton and it does it again but it if i try to start from the on position after its already fired it just winds over. it is giving my the shits coz i wanna drive my car. the only thing i could think off was the power to the computer dies and has to be turned off to reset but i tested it and it has power all the time. any help would be great also does a gze computer plug into a ge loom? is it hard to change it to fit in? cheers tomo |
BlackRex
Post #4
4ag injectors fire by earthing to ground, there is usually a bunch of brown wires that bolt the the block above the gearbox that are the ground for the injectors... check that, also do an engine diagnostic and see if the ECU is registering any error codes, you can find the ECU diagnostic procedure and codes at http://www.club4ag.com in the reference section... I would post them up but Twincam16 still has my engine manual and I cant quite remember them off the top of my head... |
---|
Adam-TRD
Post #8
if ur after an 97kw/88kw ecu i've got one. not the 100kw ecu.. just bigport |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!