What Did You Do On Your Car Today+ - V2.0  

Shuffs

Just drive up to a wall,and flick them from high beam to low a couple of times,you'll soon see which way the main light beam is throwing.They certainly are a much sleeker looking headlight,I like

wolfman101

Yeah, that's what I did. Definitely pointing right.

Doc

before and after of headlights.. ?

wolfman101

As you can see, completely different structure. The bottom strip has far more LEDs as well, so now looks solid. Indicator is now a rad bit on the top, not a bulb.

wolfman101

As for the rear lights, the GT ones have a clear lens, and blacked out internals.

wolfman101

Lastly, I have also bought the transmission tunnel in stitched leather. Don't know how clear it is here, but in the front, there is a join that doesn't match very well with the plastic of the front section. I that part in the same leather should arrive tomorrow:)

1TUFF80

Started fitting the wider flares while its off the road with a seized throw out bearing.

1TUFF80

Front and rear dimpled and slotted rotors.

mudbutton

Did you notice any difference with the new rotors?

1TUFF80

At first I didn't as the brake shop said but once they warn in there is definitely a noticable difference. Wanting to put 4 pot calipers on the front off a 01+ wrx when I find a set so hopefully that will make them even better.

mudbutton

What pads are you using?

JayWA

I recovered the back seats on my verada the other day $150 for the full set in beige leather

1TUFF80

Bremtec heavy duty pads.

1TUFF80

Scored a Prorack basket for $90. Pretty much brand new.

Flash635

I changed the oil in my Explorer.

What you need to know about the sump plug in a SOHC Explorer engine is that it's horizontal and the oil comes out.......horizontal.
Then it hits the torsion bar and sprays everywhere except into the bucket.

1TUFF80

A few zipties and a full sick towhook.

1TUFF80

Cleaned it after its 1500km trip to the QLD MCM meet.

1TUFF80

Painted the engine bay.