1990 Nissan Silvia - QLD: Brisbane  

BukkaneNinja
  • BukkaneNinja
  • Budding User
  • Member No.: 21,219
  • Joined: 18-March 05
  • Posts: 901
  • From: Australia
Post #1 post 15th July 2013 - 09:02 AM
Hey guys - Re-posting this with new images now it has been painted so everyone can have a look.

If you have any questions regarding anything let me know!

Here's my current track ride (Still road registered for now!)
Everything has been done by myself down the side of my house
With the exception of the ECU + tune - Done by Mercury Motorsport
Paint was done by myself at my old mans work!!

Engine:
Standard RB25det
Greddy FMIC
Oil Cooler
POD
SARD Fuel reg
Spitfire coilpacks
Haltech platinum pro plug in
IQ3 Racepack display dash

Exhaust:
3" down pipe into custom 3" exhaust

Suspension:
Driftworks CS2 Coilovers

Wheels:
ROTA Torques - 17 x 9 +12
(Looking to upgrade to 18 x 10.5 rears and 18 x 9.5 on front)

Modifications:
Large list....
Sound deadening removed
RB25det engine conversion
RB25 5 speed gearbox conversion
Custom tailshaft
Nissan R33 GTS-T Rear cradle swap on solid alloy bushes
Geomaster knuckles front and rear
5 stud conversion (S15 genuine front - R33 GTS-T rear {from cradle})
R33 GTS-T Brakes
Slotted rotors + braided lines
Driftworks adjustable arms all round
Driftworks HICAS lock kit
Battery relocated to boot
Interior full strip (Aircon etc)
2 seat conversion
Cusco safety 21 bolt in cage
Sparco pro Circuit seat
Driftworks 4 point harness
Nardi deep dish wheel
Quick release boss
S15 dash / center console conversion
Custom instrument cluster
Lexen rear 1/4 windows

Stereo Audio / Visual:
Stereo - Nothing - No wiring etc.
Visual -
Flugplatz Blue paint from 2013 Aston Martin Vanquish
Onevia conversion
50 mm genuine G-Corp rear guards from japan
25mm wide front guards
Vanquish 180SX front bar
Unknown rear bar
Custom fiberglass bonnet

Estimated Power:
ECU tuned by Mercury Motorsport
With a safe tune - Ran 209 RWKW
Not much, as it is a completely standard motor and turbo.

Looking forward to getting some more seat time and learning to drive it before I start making my aero modifications.

As I said, if anyone has any questions - Please ask away and i'll answer all myself.
1990 Nissan Silvia
1990 Nissan Silvia
1990 Nissan Silvia
1990 Nissan Silvia
1990 Nissan Silvia
1990 Nissan Silvia


--------------------

Comments

  • Boost Network 16
  • vy57ss
    Post #2

    Must be light cause it was definitely moving yesterday, with half a metre flames on the over run haha

    bmop12
    Post #3

    looks nice man good job!

    BukkaneNinja
    Post #4

    QUOTE (vy57ss @ Jul 15 2013, 02:13 PM) *
    Must be light cause it was definitely moving yesterday, with half a metre flames on the over run haha


    Thanks mate! What were you in? I only found out about the flames after I got off track - First time out tuned.
    I'd love to see how it goes in the dry with grip - It surprised me quite a bit!

    vy57ss
    Post #5

    I got to passenger in Fa77 white vx ss, videod the run, was hard though cause we couldn't use first gear for most of the time due to the rain couldn't get any traction, but yours was pulling hard thought it definitely would have been bigger turbo n supporting mods, flames were awesome

    BukkaneNinja
    Post #6

    QUOTE (vy57ss @ Jul 15 2013, 11:59 PM) *
    I got to passenger in Fa77 white vx ss, videod the run, was hard though cause we couldn't use first gear for most of the time due to the rain couldn't get any traction, but yours was pulling hard thought it definitely would have been bigger turbo n supporting mods, flames were awesome


    Haha! Yeah, I had to use 3rd - 2nd would just spin - Would love to try again in the dry - Most people would have gotten me then I assume.

    Cartel
    Post #7

    clean your wheels ffs!

    BukkaneNinja
    Post #8

    QUOTE (Cartel @ Jul 17 2013, 01:14 PM) *
    clean your wheels ffs!


    FU! Sell me new cheap ones! Haha.
    I've got someone coming over tonight to look at them!

    jordan-jaye.wyley
    Post #9

    i want this for my man. looks sweet. x anyonew knows of anyone selling silvias tell me xx

    Mcleod
    Post #10

    QUOTE (jordan-jaye.wyley @ Jul 31 2013, 12:19 PM) *
    anyonew knows of anyone selling silvias tell me xx


    Try checking out a lot of Silvias for sale here:

    http://www.boostclassifieds.com.au/?classS...Silvia&f=31

    BukkaneNinja
    Post #11

    QUOTE (jordan-jaye.wyley @ Jul 31 2013, 12:19 PM) *
    i want this for my man.



    looks sweet. x

    anyonew knows of anyone selling silvias tell me xx


    Thanks for that! I think it looks ok - Decent for a track hack anyway =P

    As Mcleod said, jump on the boost classifieds!

    BukkaneNinja
    Post #12

    2 Shots from downshift where the car was actually clean and paint gone from wheels!




    Faun-
    Post #13

    onevias are way hotter than sil80's imo and this would look nice as minus the kit

    BukkaneNinja
    Post #14

    QUOTE (Faun- @ Aug 1 2013, 05:52 PM) *
    onevias are way hotter than sil80's imo

    and this would look nice as minus the kit


    I actually like the Sil80's better - I just ended up with this!
    I like the front end, the rear not so much, it's going to be hacked up over the next few years with a diffuser / wing etc.
    I'm all about Function > Form - So it doesn't have to look showroom at all.

    I just didn't want it staying matte black.

    BukkaneNinja
    Post #15

    So - Not much has happened for a while - Been buying and selling a few other cars - working 2 jobs etc.

    I've finally decided to put my ass into gear and signed up for my first track day.
    Lakeside time attack series - Round 1 on the 22nd of March.

    Car is currently going through the final stages to get prepped.
    Removed the diff over the weekend - New NISMO 2 way going in this week.
    Mounted the fire extinguisher - Removed and re-fitted the racing seat and adjusted the racing harness ready to go.

    Only thing left before racing are:

    Fit 2 new front tires, fit new brake pads and fluid, re-fit diff, fix crack in intercooler silicone.

    Should be a fun day out and hopefully will get some decent laps in (However never racing lake side I doubt the times will be impressive)

    DECOY
    Post #16

    I'm loving it... Its come a long way and I'm really impressed.

    How much work was it to fit the S15 dash??

    BukkaneNinja
    Post #17

    Thanks DECOY - It wasn't too hard. Just had to remove a few bracket from the firewall and customize a little. Drill into the support bar to mount the sides.
    I'm happy with the result - Think it looks mint =)

    Weekends festivities are getting closer - 2 way is now in the diff and sorted - Being fitted tonight then off to Mercury Motorsport to have a few small things sorted out before the race!

    Just have to take it extremely slow and careful - As I've never driven with a 2 way before.

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Login with Facebook

      Login using your Facebook account!

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x