98 Hilux Turbo 3rz Conversion In Progress  

lux_pirate
  • lux_pirate
  • Site Newbie
  • Member No.: 259,706
  • Joined: 1-May 13
  • Posts: 8
  • From: brisbane, northside
Post #1 post 1st May 2013 - 01:54 AM
hi guys and girls

just thought id join so i have always got help on hand, i picked up a 98 hilux 2x4 the other week with plans to give it a breath of life, with a little reading i chose to go with a 3RZ engine and i have ordered the KORACING 3RZ turbo kit to get started.. should have it all up and running with in the month. hope i go aright iv never done anything like this before lol


 
lux_pirate
Post #2

one more thing is there anyone in the brizzy north area that has a hoist and knowledge to maybe give me a hand when i need to drop this in?? also will i need to get a engineers cert for the conversion given these motors came out in other models of this car??

joshrulz
Post #3

your doing so much better that the project luxxy twat on the general discussion thread. also, if you cant find a hoist, just use a block an tackle attached to a strong beam in your shed or similar. pretty cheap to buy them these days. good luck.

lux_pirate
Post #4

thanks for the advice, i'll have a look into it wink.gif

synergy
Post #5

join this page if u havnt already

http://www.facebook.com/3rzturbo <---lotsa info and people that have done it like me

IMO wouldn't of ever touched at KO racing kit but each to there own

lux_pirate
Post #6

why is that??

Tweak
Post #7

Looking at their website and its says 4.5 psi.......... Its it worth it.
Dont get me wrong turbo 3rz is a weapon (be there done that) 20k later and 1 rebuild. Stock engine good for 12psi (being conservative). After rebuild with forged internals and forged head the sky is the limit 25psi or more
But then the g-box dont like that (stripped input shaft splines clean off) With everything you put money here then you gotta put money into that bit and so on

If its shiney its .......<fill gap>

lux_pirate
Post #8

i'll only be running about 10-12 PSI and i no about the week rods in the 3rz engines i will probably replace them with forged ones before i drop the engine in.. realisticley its a single cab Ute it does'nt need that much to be fun to drive

synergy
Post #9

There is no set psi limit for the stock 3rz. Luke coy ran 30psi through his, denver ran 26 though his. Both drove around daily.

Dont bother with the rods unless u do the pistons, head gasket, arp headstuds etc. Just dont go revving the tits out of it

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x