Login
Upload Entry
-
Faun-
-
- Faun-
- Regular User
- Member No.: 44,283
- Joined: 25-March 06
- Posts: 1,910
-
From: Australia
Post #1
11th February 2013 - 07:55 AM
11th February 2013 - 07:55 AM
Gen 3 3sgte ke70 flat front
BODY
- 1983 beige flat front ke70
- guards are colour matched (not that well) with spray can beige.
- 'Panda' front headlight surounds
- spirit wing
-15x6.5 and 15x7 wheels (need to be 15’s to fit over brakes)
ENGINE & DRIVELINE
- gen 3 3sgte (2.0L with high mount turbo manifold with splitpulse system)
-gen 2 sump a believe
- Rebuild t03
- Haltech e6x computer
- custom intake plenum
- custom engine mounts
- front mount intercooler
- Hilux running gear (w56 gearbox, shortened tailshaft, hilux diff)(non lsd) 5 speed
- external wastegate plumbed back to exhaust
- super sequential BOV
- custom plenm, v8 ford throtle body
- 3 inch turbo back exhaust with two hi-flow mufflers
- LS1 coilpacks
- bosch 044 fuel pump
- Freshly reconditioned clutch slave by repco services
SUSPENSION & BRAKES
- Ae86 front struts with soft springs and unknown shocks
- xt130 or ke55 lca not sure which but they are 300mm.
-unknown rear shocks with around 5kg springs
- v6 camry vented rotors and calipers front
- r31 r31 rotors and calipers rear
- Nissan r31 brake master cylinder
INTERIOR
- Standard and clean
- Hilux shifter
- aftermarket steering wheel
Not sure on power have wanted to get it dyno tuned for a while now.
--------------------
BODY
- 1983 beige flat front ke70
- guards are colour matched (not that well) with spray can beige.
- 'Panda' front headlight surounds
- spirit wing
-15x6.5 and 15x7 wheels (need to be 15’s to fit over brakes)
ENGINE & DRIVELINE
- gen 3 3sgte (2.0L with high mount turbo manifold with splitpulse system)
-gen 2 sump a believe
- Rebuild t03
- Haltech e6x computer
- custom intake plenum
- custom engine mounts
- front mount intercooler
- Hilux running gear (w56 gearbox, shortened tailshaft, hilux diff)(non lsd) 5 speed
- external wastegate plumbed back to exhaust
- super sequential BOV
- custom plenm, v8 ford throtle body
- 3 inch turbo back exhaust with two hi-flow mufflers
- LS1 coilpacks
- bosch 044 fuel pump
- Freshly reconditioned clutch slave by repco services
SUSPENSION & BRAKES
- Ae86 front struts with soft springs and unknown shocks
- xt130 or ke55 lca not sure which but they are 300mm.
-unknown rear shocks with around 5kg springs
- v6 camry vented rotors and calipers front
- r31 r31 rotors and calipers rear
- Nissan r31 brake master cylinder
INTERIOR
- Standard and clean
- Hilux shifter
- aftermarket steering wheel
Not sure on power have wanted to get it dyno tuned for a while now.
--------------------
Report Comments
-
Boost Network 5
-
-
Member Login
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create Account -
Login using your Facebook account!
-
8 User(s) are reading this topic (8 Guests and 0 Anonymous Users)
0 Members:
Loading...
x