What Did You Do On Your Car Today+ - V2.0  

Page 60 of 66
Jump to page
vtrikk
Post #2066

QUOTE (TheMurrizzle @ Jan 9 2013, 12:56 AM) *
Filled up the washer bottle.


I still for the life of me can't understand how that is a defect.

Ot: over the last week, removed tint, fitted new wheels, installed manual boost controller, new spark plugs and coil packs one happy camper smile.gif

rus_s13
Post #2067

Attempted to drive to work this morning, engine said no.

Lots tonight, f*ck sr20's

Luke
Post #2068

Changed the strut bar to chassis bushes. Difference is incredible! The brakes feel that much more responsive, and the stability of the car under brakes has increased dramatically! Only took me about an hour as well, very easy to do. Can not speak highly enough of the Nolathane 48166 kit!

Old, shitty bushes.


Pretty new red Nolathane ones!


For sale: 2 genuine GM strut bar to chassis bushes. Second hand, only fitted once! For inquiries and inspection, please see the wheelie bin on my nature strip.

DAL32
Post #2069

Ah, response. It's the thing you get when you give up ride quality.

I'd poly bush my but can't be bothered unless the bushes are fcuked.

VGJONO
Post #2070

Replaced the front wheel bearings after the front left started making a horrible whining when i tried to drive to the shops the other day. sure enough the old bearings were surrounded by metal shavings, since the grease was red i have a suspicion that the last time the bearings were done, somebody may have picked up rubber grease instead of Bearing grease unsure.gif

Twat In The Hat
Post #2071

QUOTE (vtrikk @ Jan 9 2013, 02:15 AM) *
I still for the life of me can't understand how that is a defect.

Ot: over the last week, removed tint, fitted new wheels, installed manual boost controller, new spark plugs and coil packs one happy camper smile.gif


Been explained before a few times..

Let's say a bird takes a giant shit/a mud puddle gets sprayed/dust from the dirt road you're on/1,000 angry bees smash into your windscreen while you're driving.. Your automatic reaction is to pull back on the wipers to squirt some onto the screen.. Right? Well empty bottle, you get nothing, but the wipers start working. Now you have bird shit/mud/dust/bugs smeared all over your windscreen rather than being cleaned off because you have no water.

j.d.m
Post #2072

Installed coilovers last night, Set height, will get wheel alignment on Tuesday.

Luke
Post #2073



All of the above today; plugs, manifold insulators, and water inlet seals.



After two emergency trips to Repco (First because one of the bolts for the inlet housing snapped, and second because one of the coils came apart) it's all back together now. Just waiting on the silicon to dry.

TwinCam16
Post #2074

laugh.gif Cute.

RB25_lovin
Post #2075

sold the skyline. i will miss her, until i get something better and then i probably wont

Protius
Post #2076

What do those manifold insulators do? Are they the same idea as what they make for WRX. Slightly increasing the intake runner length making for ever so slight increase in torque?

TwinCam16
Post #2077

Pretty much, also the spacing from the block is meant to drop intake temps.
It's more a "pissing into the wind" mod like a pod filter to be honest.

stockmy00
Post #2078

placebo effect

j.d.m
Post #2079

bought a mspec frontbar



after 4 hrs of non stop sanding, and half a box of 120G sand paper, got it to the FIRST coat of primer ever put on it in it's life. someone did a diy respray 3 times on it and had paint flakes





Primed and sanded down, then mist coat



Result after 4 coats base coat and 4 coats clear





HarlzC
Post #2080

Unbolted the mufflers on the SS, sounds a bit better than stock now haha.

Draven
Post #2081

QUOTE (HarlzC @ Feb 10 2013, 09:15 PM) *
Unbolted the mufflers on the SS, sounds a bit better than stock now haha.


Bogan style sports exhaust tongue.gif

unsentletter
Post #2082

fitted new Monroe Gas shocks and King Springs to the Dato

54BRE
Post #2083

Sold it and bought something else biggrin.gif

scoobydoo23
Post #2084

Looked at it
got depressed
Kick it
Went back inside

scottypipen101
Post #2085

dropped a skid cause im tuff as

astorey
Post #2086

QUOTE (54BRE @ Feb 11 2013, 07:50 PM) *
Sold it and bought something else biggrin.gif

WHY DO YOU HAVE TO MAKE VAGUEBOOK POSTS.

What did you buy?

truffles
Post #2087

Put on of them in the shed, covered it up and hoped to work on it in more favourable times.

The Doctor
Post #2088

pissed off the yellow parker and foggie bulbs with LED's

Geoff
Post #2089

Sold it.

Then shed a tear. I miss my old Pajero already sad.gif

bandit_corolla
Post #2090

finally finishd my front lip and sideskirt. there might be a diy thread on how to make one, didnt take that much pic but ill see what i can do if you really wanna see it.


VGJONO
Post #2091

Pulled my new motor out of the parts car
(as far as i know it has some head work, 40thou over pistons and is decompressed and ready for boost biggrin.gif )

Pulled the old motor out of my car

(new on left/old on the right)

going from an auto 4G32B 1.6L to a worked 4G32 1.6L Manual biggrin.gif

Cheers
VGJONO thumbsup.gif

The Doctor
Post #2092

Front lip installed. leaving the colour as is.


Eugene Dickins
Post #2093

Lip looks awesome

renewed the rego for the jeep for 6 months. Will prob sell it within that 6 months.

Auditude
Post #2094

My headlights magically became darker :oopsie:

aaron.
Post #2095

Went to install my prototype 3-step rev limiter;
Engine running like shit and white smoke from exhaust out of nowhere, didn't finish installing rev limiter.
Hopefully it's not raining tomorrow so I can diagnose the engine problems and install the limiter. BHG would suck ass.

j.d.m
Post #2096

And other dash trim pieces, no more rattlecan black

The Doctor
Post #2097

3rd brake light redout overlay


ugly chrome window trim


be gone!



DAL32
Post #2098

Found that my bodge fix of my drivers door cable is failing, devised new way of opening door from the inside. A combination of pushing the door and pulling the handle at the same time in one swift move, give the door somewhat of a kick while pulling the handle sharply.

_Ben
Post #2099

Put some clear side indicators on the AU, for max ADM swag

j.d.m
Post #2100

Install my Headlights and relocate some wires.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 60 of 66
Jump to page
11 User(s) are reading this topic (11 Guests and 0 Anonymous Users)
0 Members:
Loading...
x