Back

 What Did You Do On Your Car Today+ - V2.0  

Page 58 of 66
Jump to page
Post Topic
Luke
Post #1996

Awesome setup there, Gaffry!

Geoff
Post #1997

Thanks d00d, built it all myself.

j.d.m
Post #1998

Painted my cooler/piping black
Heat emissivity !


julio_vasquez
Post #1999

Australia. So the ute on the back had the 2 bikes on it, snapped the timing belt an hour and a half from home. We then had to get a mate to come up with a trailer to tow us back. Thet trip was slow.


Attached File  Australia.jpg ( 73K ) Number of downloads: 14
 
Luke
Post #2000

Spent around 3 and a half hours washing, waxing, vacuuming, and just generally cleaning the damn thing. Was long overdue...

Also fitted the cargo barrier, going away for a week on Saturday.

Geoff
Post #2001

QUOTE (Luke @ Nov 22 2012, 01:41 PM) *
Spent around 3 and a half hours washing, waxing, vacuuming, and just generally cleaning the damn thing. Was long overdue...

Also fitted the cargo barrier, going away for a week on Saturday.

Where are you off to?

Luke
Post #2002

QUOTE (Geoff @ Nov 22 2012, 05:16 PM) *
Where are you off to?


Not far, just down to Rye on the Mornington Peninsula with 4 mates and ze missus.

j.d.m
Post #2003

Put a turbo smart plumback blow off valve in the R33. So i don't have to hear that KASHOOOOOOO noise anymore !

rus_s13
Post #2004

Fuel tank, pump, filters





Old tank:

Mother of god.jpg


finishing the roof/bootlid today, came out alright




and relocating these two:





I didnt notice this until i put the wider wheels on this morning-





unsure.gif

Zimma
Post #2005



Swapped over to a newer head unit... Only took 5 hours until I realised I had blown a fuse.

patrick_h_oz
Post #2006

Finally got around to putting the HICAS lock bar in and capped off the lines. Now that I'm done messing around with suspension I can get a wheel alignment and start driving it again! Over the last couple of weeks I've been plugging away at it getting little bits done here and there. It's only been sitting on the road 6 months or so.. lol

V3N0M
Post #2007

Washed, Waxed and polished it front to back
Every damn inch of it

j.d.m
Post #2008

Fitted up my boost gauge.
Geoff
Post #2009

Gave it a run through the D'Entrecasteaux National Park for 2 days.





Still on the way home! Got sick of driving soafe the other half jump behind the wheel at Mandurah lol

j.d.m
Post #2010

Wheels on !

RB25_lovin
Post #2011

looks like fun geoff

patrick_h_oz
Post #2012

Did anyone in Bris touch their car today? By the time it cooled down enough to think about it it was beer.gif o'clock!

HE MAN
Post #2013

QUOTE (Geoff @ Dec 2 2012, 05:52 PM) *
snip

Where is home now?
Ill be down that way next week sometime

Twat In The Hat
Post #2014

Removed, cleaned, refitted and bled the slave cylinder.

Geoff
Post #2015

QUOTE (HE MAN @ Dec 5 2012, 08:19 AM) *
Where is home now?
Ill be down that way next week sometime

Living in Perth, FIFO to the Goldfields.

lo_rolla
Post #2016

Geoff that place looks f'king epic...

That's the sort of sh!t I wanna do more of.
BAM!
Post #2017

Took the carby off and cleaned her out because it was running rough as guts. Forgot to put one of the lines back in and ended up leaking fuel everywhere. Wondered why it was leaking and running worse, dad took one look at smacked me up the side of my head tells me Im a dickhead and to double check the lines again. Woops. Good fun though learning stuff as I go.

chevval308
Post #2018

pick my motor up today, early xmas present!!!!!

https://www.boostnetwork.com//database/f...#92;x00


Attached File  motor_at_crem.JPG ( 490.17K ) Number of downloads: 12
 
DAL32
Post #2019

Put shorter wheel bolts on my GTV so it would drive, drove it.

Put my 156 on a tow truck because tomorrow it gets lowered and a heater hose.

Put another 30 on the clock on my Lancer.
The Doctor
Post #2020

nothing much,

just removed the rear symmetrical awd badge and put LED parkers in.

BAM!
Post #2021

Jacked it up, then let it back down, then walked away pissed off because of old people and their need to butt in every 5 f**king minutes.

AGI78-VP
Post #2022

picked up a second hand harrop htv2300 blower on ebay for a steal !

HE MAN
Post #2023

Flogged a broken harrop htv2300 blower on ebay, poor bastard who bought it!

OT, put $60 of fuel in the car and got jut shy of 1/2 of a tank :(

AGI78-VP
Post #2024

QUOTE (HE MAN @ Dec 16 2012, 08:18 PM) *
Flogged a broken harrop htv2300 blower on ebay, poor bastard who bought it!

OT, put $60 of fuel in the car and got jut shy of 1/2 of a tank sad.gif


hahaha hoping that wont be the case

VGJONO
Post #2025

Decided to do a carby teardown for the 4th time to try and figure out what was up with it since my car chewed through fuel and was spluttering at mid revs. looked at the jets, noticed they were in the wrong way head_wall.gif (1.9mm primary and .9mm secondary instead of .9 primary and 1.9 secondary) swapped them around put it back together and huzzah it runs properly all the way through the rev range and ive also more than doubled the economy of the car from 200klm/50L to the now much better 500klm/50L, not bad for a 3 speed auto 4 banger.

THE STIG
Post #2026

S13 pulled the rear cradle and replaced the bushes... what a mission

Twat In The Hat
Post #2027

Removed old slave cylinder, decided to get rid of it, pulled it apart.. Found the piston looking like this..



Chucked a new slave cylinder on, flushed the system.

Burntsmoke
Post #2028

Moved it off the road and into the driveway.

Geoff
Post #2029

Drove it from Perth to Melbourne.

Twat In The Hat
Post #2030

You brought the freaking rain with you.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 58 of 66
Jump to page
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
Loading...
x