Back

 2001 Mitsubishi Magna  

Upload Entry
vodevil
  • vodevil
  • Standard User
  • Member No.: 206,420
  • Joined: 9-November 10
  • Posts: 64
Post #1 post 29th September 2012 - 02:29 AM
DRIVELINE
*2.5" Cat-back sports exhaust with single outlet chrome droopy tip
*Verada/VRX/Sports engine cover & rocker cover

SUSPENSION & BRAKES
*King Low SP springs & Selby shock absorbers all round
*RDA slotted front rotors / EBC Ultimax front pads

EXTERIOR
*18x7 ZG Outlander 5-spoke mags on 225/45R18 Federal Formoza FD2 tyres.
*1-piece para headlamps (with Osram Nightbreaker low beam and standard high beam bulbs)
*KJ Verada Xi grille
*KJ Diamante tail-lamp with integrated reverse lamp conversion
*Clear side indicators
*Chrome belt moulds and window surrounds
*Genuine tinted rear sunshade (aka Grandpa Wing)
*Genuine weathershields/rainguards
*Colour-coded door moulds
*De-badged rear with the exception of the Mitsubishi emblem

INTERIOR
*TJ2 VR-X front and rear seats and door card inserts
*Chrome interior door handles and surrounds
*Black leather steering wheel with silver perforated inserts
*TF Sports instrument cluster
*KE Verada Ei Centre facia drawer and gear shift surround

ELECTRICAL
*Mitsubishi 380 twin (high/low tone) horn setup

AUDIO & INTERIOR ELECTRICAL
*Eclipse AVN827GA CD/MP3/USB/AUX/iPod/Bluetooth/GPS receiver
*Polk DB6501 6.5" component speakers (100w RMS, 4 ohm)
*Kicker DS693 6x9" 3-way speakers
*Blackvue DR400G-HD II dash camera with concealed wiring and Power Magic Pro power unit
*Garmin 2455LM GPS unit with concealed wiring, using same Power Magic Pro unit

- to be fitted
*Cadence ZRS-C9 4-channel amp (4x100w @ 4 ohm)
*Stinger 6000-series 4 AWG amplifier wiring kit

Estimated Power:
130kw ATF

This post has been edited by vodevil: Apr 26 2014, 02:02 PM

Check out these other rides...

TOP

Comments

  • Boost Network 33
  • vodevil
    Post #2

    BEFORE AND CURRENT PICS!

    The day I bought it home (19/2/12, 179,114km):











    Currently (3/6/13, 226400km)
    FA77
    Post #3

    It's really clean.

    I don't understand why people modify / own these... Front wheel drive auto sedan...
    Is it your family rig?

    Gerry Giraffe
    Post #4

    QUOTE (FA77 @ Sep 29 2012, 10:39 PM) *
    It's really clean.

    I don't understand why people modify / own these... Front wheel drive auto sedan...
    Is it your family rig?



    Really?? You can't be serious. That's like asking why people buy and modify commodores or falcons. A 3.5L v6 magna will out accelerate and corner better than the same year model falcon or commodore.......
    sr_silvia
    Post #5

    QUOTE (FA77 @ Sep 29 2012, 10:39 PM) *
    It's really clean.

    I don't understand why people modify / own these... Front wheel drive auto sedan...
    Is it your family rig?


    I don't understand why more people don't dunno.gif they are reliable, quick out of the box and sh!t all over VT/AU ADM cars of the came caliber (IMO anyways)
    So what they are FWD, its not like every single person who owns a commo uses it for skids, its just a 'yeah got a rwd car' macho thing.

    Stephen92
    Post #6

    Looks really clean ! I'd happily drive it !

    FA77
    Post #7

    Good points made.

    Having never driven one I wouldn't know, but now I'm interested.
    Either way it would be hard to find one cleaner then this one.

    vodevil
    Post #8

    Thanks for the kind words guys smile.gif I echo all the sentiments above.. Its not a family rig, and I don't tow, so a FWD sedan suits my needs fine, and you don't see too many modified Magnas about (in comparison to Falcons and Commodores)
    Took the Magna for a hill run today with some fellow Magna and 380 drivers - the lowered springs have transformed the ride dramatically! It handled the twists and turns of Dayboro and Mt. Mee with ease, though it did highlight the fact that my brakes have seen better days.. Time to think about new brake pads, I was thinking QFM HPX pads.

    sr_silvia
    Post #9

    If you wana get more out of it look at doing a ralliart engine conversion, 175fwkw from factory thumbsup.gif

    Also, don't be too caught up with brand name brake pads if your not racing, not really a need to spend lots more $ anyways when OEM or aftermarket cheapies are ok

    vodevil
    Post #10

    QUOTE (sr_silvia @ Sep 30 2012, 09:59 PM) *
    If you wana get more out of it look at doing a ralliart engine conversion, 175fwkw from factory thumbsup.gif

    Also, don't be too caught up with brand name brake pads if your not racing, not really a need to spend lots more $ anyways when OEM or aftermarket cheapies are ok


    I'd rather go the 3.8L 6G75 conversion for similar money, they go pretty hard in the Magnas when tuned right, with a lazy 160kW off the bat with plenty of potential for more ph34r.gif

    I agree about the brake pads, I mentioned QFM as they are widely recommended by other Magna and 380 enthusiasts as being a great all-rounder pad, I have used RDA Extreme and EBC Greenstuff in the past also, I was pleasantly surprised with the RDAs, less so with the EBCs (too harsh on the rotors and dusty as hell)
    sr_silvia
    Post #11

    QUOTE (vodevil @ Sep 30 2012, 10:28 PM) *
    I'd rather go the 3.8L 6G75 conversion for similar money, they go pretty hard in the Magnas when tuned right, with a lazy 160kW off the bat with plenty of potential for more ph34r.gif

    I agree about the brake pads, I mentioned QFM as they are widely recommended by other Magna and 380 enthusiasts as being a great all-rounder pad, I have used RDA Extreme and EBC Greenstuff in the past also, I was pleasantly surprised with the RDAs, less so with the EBCs (too harsh on the rotors and dusty as hell)


    My old man used to have a 380 VRX (5spd tiptronic) It wasn't a bad engine, used stupid amounts of fuel lol, I'll have a check but I'm pretty sure it was ~175kW out of the box? Went nicely anyways, they make good power with basic mods as they are restricted allot by the exhaust and emissions unfortunately.

    vodevil
    Post #12

    Replaced the front and rear seats and door card inserts with TJ2 VRX items, and refitted the original black window switch, console and centre facia trims.
    I am quite liking the two-toned grey setup (darker seats/door card inserts vs. light carpet, hoodlining, and lower dash/door cards) it ties in with the steering wheel scheme and keeps the interior light IMO
    vodevil
    Post #13

    On the QMD cruise to Toorbul, 30/9/12. Image courtesy of Marty (SH00T)
    vodevil
    Post #14

    Slotted RDA front rotors and EBC Ultimax brake pads
    vodevil
    Post #15

    More photos... because I just like taking them! lol
    vodevil
    Post #16

    Its been a while since I updated, since the last post I have fitted my front component speakers and 6x9s in the rear. No amp yet, but I have one to be fitted, a Cadence ZRS C9.
    I also hit a pretty nasty pothole after the floods up here in January, buckling my 18s. I have since replaced them with a set of 18x7s off an Outlander, with Federal Formoza FD2 rubber.
    bretth
    Post #17

    Looks nice.

    For brakes look at doing a 380 front brake conversion, and yes the QFM pads are good HPX for street, A1RM for more serious stuff.

    6g75 engine is the way to go (for others the 160kw vodevil mentioned is at the wheels, add some devent cams and 180 +@ wheels is easily achievable in a very street able package. Will get high 13's if you get enough traction).

    vodevil
    Post #18

    QUOTE (bretth @ Apr 6 2013, 05:17 PM) *
    Looks nice.

    For brakes look at doing a 380 front brake conversion, and yes the QFM pads are good HPX for street, A1RM for more serious stuff.

    6g75 engine is the way to go (for others the 160kw vodevil mentioned is at the wheels, add some devent cams and 180 +@ wheels is easily achievable in a very street able package. Will get high 13's if you get enough traction).


    Thanks Brett, its the next major step, engine-wise, I want to take when the 74 gives up the ghost. Though, at 220k I think its got a bit of life yet! laugh.gif
    Definitely the logical step to take for anyone with a Magna wanting to get substantial performance gains.


    Saturdays = Maintenance day... 220k service

    Engine flushed with Liqui-Moly Engine Detox, Refilled with Castrol Edge Titanium 5w40, ACDelco oil filter and Wynns Engine Treatment & Oil Stabiliser; and Caltex Techron 5000 fuel additive added to the tank.
    vodevil
    Post #19

    Got around to installing my Blackvue DR400G-HD II dash camera today smile.gif









    Added a 3-in-1 charger, so that both the camera and my phone run off the Power Magic Pro
    vodevil
    Post #20

    More photos, taken this weekend
    Twat In The Hat
    Post #21

    Absolutely love it! They are so much fun to drive and reliable as hell. I'm glad that so many people hate them, means I can have a car that I like that is different to every other dickhead out there.

    vodevil
    Post #22

    Thanks mate, I agree smile.gif 222,000km and the only major problem I have had is the plastic heater core pipes snapping (dash out job), otherwise I can't really complain in the reliability stakes! The paint lets it down a bit (roof, boot and bonnet are prime examples of Mitsubishi's sub-par paint methods at the time)
    Best part is, coppers - for the most part - don't take a second glance at it biggrin.gif

    vodevil
    Post #23

    Step into my office, won't you?









    Bought a Garmin today, which I wired down through the unused tweeter pod in the dash, under the steering column and through the back of the centre stack to hide as much of the wiring as possible (when unused, the wire to the unit clips to the A-pillar).
    To save battery life and minimise the visible wiring of the Blackvue, Garmin and phone charger, I am running them off a multi-socket/USB extension, plugged into the Power Magic Pro, originally used for the Blackvue, fitted under the centre console (see the Blackvue install a couple posts up). The iPod runs directly off the head unit, obviously, this wiring is also hidden under the centre console.

    vodevil
    Post #24

    I had purchased a TF Sports cluster as an upgrade from my standard one, but after fitting it and noticing that the fuel gauge was 1/8 off and the temperature gauge similarly inaccurate, I decided to improvise..
    After removing the speedometer, fuel and temperature gauges from the TJ cluster; fitting them to the TF cluster and swapping the yellow needles for red, the cluster now functions properly along with having the correct odometer reading for the car...
    Catapult
    Post #25

    Looking good bloke, my parents always had manual versions and I loved them, great speed and reliability for what they are. The mods are coming along nicely too, who gives a shit if others dont like it, if it makes you smile then it'd be rude not to keep goin!

    vodevil
    Post #26

    QUOTE (Catapult @ Jun 4 2013, 10:55 AM) *
    Looking good bloke, my parents always had manual versions and I loved them, great speed and reliability for what they are. The mods are coming along nicely too, who gives a shit if others dont like it, if it makes you smile then it'd be rude not to keep goin!


    Thanks mate! smile.gif

    vk134
    Post #27

    All nicely done, Outlander wheels look factory sports fit, good choice. Most people dismiss the old Mitsi Maggot, but for the money, they go well, fuel is better than falc/comm/camry and with the handling and braking mods you have done, it would be a nice car to drive. I really like the workmanship with fitting the gadgets, too common that people butcher things to make them fit

    vodevil
    Post #28

    QUOTE (vk134 @ Jun 5 2013, 10:17 AM) *
    All nicely done, Outlander wheels look factory sports fit, good choice. Most people dismiss the old Mitsi Maggot, but for the money, they go well, fuel is better than falc/comm/camry and with the handling and braking mods you have done, it would be a nice car to drive. I really like the workmanship with fitting the gadgets, too common that people butcher things to make them fit


    Thanks for the kind words mate, I'm try to keep it looking as OEM-like as possible, inside and out. It does handle quite well, but I am considering fitting King Low SP springs when I replace my struts (Selby all round). At its current height, my driveway and exhaust are forever at loggerheads - so I am considering raising it from its approx 45mm below stock height to 30mm below stock height with the King SPs.

    vodevil
    Post #29



    vodevil
    Post #31

    Its been some time since I last updated, not a lot to report aside from fitting KIng Low SP springs and Selby shocks all round. It now sits at about 30mm lower than stock and rides a lot nicer (and can now traverse my driveway).
    vk134
    Post #32

    Well done, looks great, subtle practical mods, totally street legal hassle free fun

    vodevil
    Post #33

    QUOTE (vk134 @ Oct 30 2013, 08:55 AM) *
    Well done, looks great, subtle practical mods, totally street legal hassle free fun


    Thanks for the kind words mate, all of what you have mentioned is what I have been aiming for smile.gif

    vodevil
    Post #35

    Been a while since I last updated, not a lot has changed except for a swap from Pedders Lows to King Low SP springs all round (along with new Selby shocks all round and front strut mounts)






    This happened...




    Finally got around to fitting the Eclipse AVN827GA DVD/USB/iPod/Bluetooth Navigation unit I had sitting in a box for six months.
    It was originally a Subaru factory accessory unit with a factory Subaru wiring harness which I customised, along with an Aerpro Magna->universal harness, to get USB/iPod/Bluetooth and some mobile phone and navigation capabilities.
    I need to do further work to get full GPS/DVD functionality (grounding handbrake signal wires, etc.), but I am happy with the improvements in iPod control, AM radio and mobile phone calling. (My old Eclipse CD5030 unit - though it was a great stereo - only tuned in 10kHz increments (USA stations), not 9kHz; and the iPod interface left a lot to be desired).

    Also fitted a centre fascia and and lower pocket from a TL ES. It matches the silver in the TF Sports cluster and VRX LE wheel quite well, I'm happy with the result smile.gif

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Forgotten your password?
    • Login with Facebook

      Login using your Facebook account!

16 User(s) are reading this topic (16 Guests and 0 Anonymous Users)
0 Members:
Loading...
x