Back

 2004 HSV Coupe GTO  

Upload Entry
AGI78-VP
  • AGI78-VP
  • I have many leather bound books
  • Member No.: 33,618
  • Joined: 11-October 05
  • Posts: 843
  • From: Australia
Post #1 post 27th May 2012 - 02:40 AM
old thread was archived and i wanted to update it, so new one it is

engine: 232/234 cam, vcm otr intake, 25% UD pulley, mafless tune, extractors and a twin 3" exhaust made 384rwhp

Trans: npc hd clutch and stock 6 speed manual

suspension: pedders adjustable coilovers

wheels: 19x9.5 vertini magic with 235x35x19's


have been trying to go for the stanced look and just got these wheels fitted on friday, front offset im really happy with, rear i think will need a 5mm slip on spacer but need to roll and pump the guards first, and then i will lower it about 10-15mm further all round, but so far i love the look
















This post has been edited by AGI78-VP: May 27 2012, 03:19 AM
2004 Hsv Coupe Gto


--------------------

Check out these other rides...

TOP

Comments

  • Boost Network 0
  • krayziebenno
    Post #2

    tuff GTO. wheels really suit well. good height too

    Wraith
    Post #3

    Damn it this stupid stretching thing has spread to commos. It looked tough as before now it looks silly. Still damn clean and just a little step up from a VP

    Gerry Giraffe
    Post #4

    Mate that's looking tops, good work!

    AGI78-VP
    Post #5

    QUOTE (Wraith @ May 27 2012, 10:49 AM) *
    Damn it this stupid stretching thing has spread to commos. It looked tough as before now it looks silly. Still damn clean and just a little step up from a VP


    cant please everyone tongue.gif

    ever since i saw the new m3's with the concave wheels i wanted them for the coupe, i could have easily fit on 8.5" wide wheels but they are pretty flat, i've never really been like funk yeh streched tyres but to comfortably fit the 9.5"s all round and have them sitting flush it had to be done

    Wraith
    Post #6

    Least it's concave and not huge lips that you see every where now days. Still jealous as tongue.gif

    *High_Roller*
    Post #7

    Nice mate, Very clean all round werd.gif

    75 KINGSWOOD
    Post #8

    sweet, but it doesnt look like it will go another 10-15cm..............

    VL87DB
    Post #9

    Ruined it with silly tires imo. wheels look sick but, should have just gotten proper sized tires but im guessing they probs wouldn't fit anyway..

    AGI78-VP
    Post #10

    QUOTE (75 KINGSWOOD @ May 27 2012, 11:24 AM) *
    sweet, but it doesnt look like it will go another 10-15cm..............



    mm??

    AGI78-VP
    Post #11

    QUOTE (VL87DB @ May 27 2012, 11:26 AM) *
    Ruined it with silly tires imo. wheels look sick but, should have just gotten proper sized tires but im guessing they probs wouldn't fit anyway..


    yeh unfortunately not, i think next time i'll go up to 245's and they should still clear, but they will still look stretched, theres not enough room to run a 265 or 275 sad.gif

    vy57ss
    Post #12

    Loving the wheels, refreshing step away from the ve/hsv Iwheels you see on everything, one tough looking gto

    sidewayz
    Post #13

    looks awesome mate.

    I think the wheels and tyres sit well.

    GTRVspec95
    Post #14

    Slight explosion in my pants ......

    Who dat
    Post #15

    love these rims, look really good on m3's but looks awesome on yours dude biggrin.gif

    bustage
    Post #16

    hnnnnggggg concave.

    anwonystylez
    Post #17

    Concave <3 I rarely see these GTO's going around.

    andyb749
    Post #18

    looks great maybe some more photos of interior engine etc but looks really good with the rims

    gutless
    Post #19

    So good mate!

    Loving it!

    11SLI
    Post #20

    love it man, they suit it perfectly...would you paint them black or leave them as is?

    Faun-
    Post #21

    commodores can look good with offset like this.

    yours not so much though

    AGI78-VP
    Post #22

    QUOTE (11SLI @ May 28 2012, 10:33 AM) *
    love it man, they suit it perfectly...would you paint them black or leave them as is?


    thought about black, i actually wanted them in matte black but there was a 3 month wait on them, so i figured funk it, i'll get the silver ones and paint them later, but i actually really like the silver


    QUOTE (Faun- @ May 28 2012, 11:48 AM) *
    commodores can look good with offset like this.

    yours not so much though


    although i think that opel looks pretty cool, thats a bit on the extreme side and would have looked sh!t on my car, but thats just my opinion. What i went for was a bit more towards what you see on alot of the newer corvette's and camaro's and alike when they give them good fitment in the US

    alex338
    Post #23

    looks good! i reakon M3 BBS style wouldve looked mint too!

    DANIELJARVIS
    Post #24

    Lose the gay tail lights.
    Get commodore ones or something?
    As with headligts. The altezza faze is dead.

    Wheels look okay. But why you'd go any bigger then 18inch makes no sense, youcsn barely run a decent stretch, and prevent you from going lower
    Get some 18's! Big wheels are outdated man.

    Olaf
    Post #25

    QUOTE (DANIELJARVIS @ May 29 2012, 06:32 AM) *
    Lose the gay tail lights.
    Get commodore ones or something?
    As with headligts. The altezza faze is dead.

    Wheels look okay. But why you'd go any bigger then 18inch makes no sense, youcsn barely run a decent stretch, and prevent you from going lower
    Get some 18's! Big wheels are outdated man.



    head_wall.gif

    AGI78-VP
    Post #26

    QUOTE (DANIELJARVIS @ May 28 2012, 08:32 PM) *
    Lose the gay tail lights.
    Get commodore ones or something?
    As with headligts. The altezza faze is dead.

    Wheels look okay. But why you'd go any bigger then 18inch makes no sense, youcsn barely run a decent stretch, and prevent you from going lower
    Get some 18's! Big wheels are outdated man.

    Thanks for the input champ, the headlights and tail lights are actually the factory lights on these, as for the wheels I'm happy with them and wouldn't have wanted any more stretch, but that comes down to personal taste i guess

    VL87DB
    Post #27

    QUOTE (DANIELJARVIS @ May 29 2012, 06:32 AM) *
    Lose the gay tail lights.
    Get commodore ones or something?
    As with headligts. The altezza faze is dead.

    Wheels look okay. But why you'd go any bigger then 18inch makes no sense, youcsn barely run a decent stretch, and prevent you from going lower
    Get some 18's! Big wheels are outdated man.


    Ok Mr jdm

    11SLI
    Post #28

    QUOTE (DANIELJARVIS @ May 29 2012, 06:32 AM) *
    Lose the gay tail lights.
    Get commodore ones or something?
    As with headligts. The altezza faze is dead.

    Wheels look okay. But why you'd go any bigger then 18inch makes no sense, youcsn barely run a decent stretch, and prevent you from going lower
    Get some 18's! Big wheels are outdated man.



    QUOTE (Olaf @ May 29 2012, 08:07 AM) *
    head_wall.gif

    ill raise him another head_wall.gif head_wall.gif lol

    Joey92
    Post #29

    QUOTE (DANIELJARVIS @ May 29 2012, 06:32 AM) *
    Lose the gay tail lights.
    Get commodore ones or something?
    As with headligts. The altezza faze is dead.

    Wheels look okay. But why you'd go any bigger then 18inch makes no sense, youcsn barely run a decent stretch, and prevent you from going lower
    Get some 18's! Big wheels are outdated man.


    You realise those headlights and tail lights are standard?
    and he didn't necessarily want stretched tyres either.

    OT: I'm unsure about the concaves, not pronounced enough or something, but I do like the style of wheel you chose. Looking forward to seeing the end result thumbsup.gif

    edit: whoops missed the 2nd page of comments, sorry for restating information.

    Who dat
    Post #30

    QUOTE (DANIELJARVIS @ May 29 2012, 06:32 AM) *
    Lose the gay tail lights.
    Get commodore ones or something?
    As with headligts. The altezza faze is dead.

    LOL! bowrofl.gif

    silvervx
    Post #31

    OLAF .........

    Really ??? They are factory tails for sure

    The Doctor
    Post #32

    i think i liked the black rims better,

    still looks tuff though

    DUDEY99
    Post #33

    nice gto did you own that red vp turbo?

    AGI78-VP
    Post #34

    QUOTE (DUDEY99 @ Jun 1 2012, 01:11 PM) *
    nice gto did you own that red vp turbo?


    yeh mate, ended up stripping and selling it as parts, body went to the wreckers, still regret it

    DUDEY99
    Post #35

    QUOTE (AGI78-VP @ Jun 2 2012, 03:26 PM) *
    yeh mate, ended up stripping and selling it as parts, body went to the wreckers, still regret it


    yeah i was reading it on the street commodores forum, that vp was one of the best i have seen, i own a vp aswell, just wondering about the saas seats you had in it, do they just fit straight in? and the back seats were saas swell??

    http://www.boostcruising.com.au/forums/ind...14967&hl=vp

    thats my vp^^ i wanted to change the rims to silver/grey ones like yours or just put fat 6 spokes on it.

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Forgotten your password?
    • Login with Facebook

      Login using your Facebook account!

3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
Loading...
x