What Did You Do On Your Car Today+ - V2.0  

Page 5 of 66
Jump to page
astorey
Post #141

QUOTE (S2krazie @ Apr 6 2011, 01:15 PM) *
Already been approached a few times for it. Features and shit don't really interest me that much. dunno.gif I'll do them all when I'm ready and when I feel the car is finished. At the moment, its about 98%.
As I said we'll see how I go in about 2wks time. Might end up being one of the last features for the month. wavey.gif

Come onnnnnn everyone loves to blow their own horn whenever possible. oopsie.gif

i only got a hk
Post #142

QUOTE (astorey @ Apr 6 2011, 10:43 AM) *


L2 read good car blogs

http://stanceworks.com/lowlygents/

astorey
Post #143

QUOTE (i only got a hk @ Apr 6 2011, 02:09 PM) *

Oh didn't realise you could only put your car on 1 blog. unsure.gif

I know it's on stanceworks.

Slide_thats5
Post #144

ok so todays list was : Front struts, Diff, full brake conversion incl the booster, master cylinder and lines, front steering, full interior incl cage and wired up the custom dash and other gauges, Tommorrows, Drop tank sit motor and box in, Refit turbo, manifol, waste gate, intake, injectors, fuel reg, run acc cable, start cooler and piping, if time start wiring to motor and box, Saturdays list, design and build full exhaust, finish wiring, wire computer, Sunday, see if it kicks if so take her for a strap down the road. then start finishing fitting everything, then go choose some nice 17 or 18s any ideas for some nice wheels on a black gemini coupe

Stompy
Post #145

QUOTE (autech_s15 @ Apr 4 2011, 06:02 PM) *
Yeah man if you check out my blog, there isn't much that i DIDN'T dynamat lol.

Today, I stripped the body loom down, cleaned the wires and re taped it up. Mounted all of my push type zip ties ready to tie down the loom. I cut off the two ABS seat belt pretensioner wires as well as the wires for the cat sensor. I hate unnecessary wiring.


Link to blogy goodness? i was reading it the other day but cant find the link now

Joyrid3r
Post #146

QUOTE (Stompy @ Apr 8 2011, 01:46 AM) *
Link to blogy goodness? i was reading it the other day but cant find the link now


http://www.obnxsh.com/

It's a good read/look....wish I had the motivation...laugh.gif

OT: nothing as I don't have the motivation, probably fix my interior light tomorrow though unsure.gif

Rileys
Post #147

got one side of the suspension done......now need to "undo" a locknut....and by undo i mean break it the fuck off

clutch-monkey
Post #148

took the wheels to go get powdercoated.. maybe didn't need the patrol to lug them around mamoru.gif

Luke
Post #149

Replaced the headlight switch to one with a fog light switch.

Now all I need is a relay, a bit of cut-and-shut wiring to the factory harness, and I shall have myself some foggies.

Hoybo
Post #150

QUOTE (Luke @ Apr 8 2011, 12:10 PM) *
Replaced the headlight switch to one with a fog light switch.

Now all I need is a relay, a bit of cut-and-shut wiring to the factory harness, and I shall have myself some foggies.


Get Khubner to help you. Won't need to spend money on relays.

OT: Topped up the brake fluid and oil on the daily.

blayze123
Post #151

plugs and leads on my vs ute, and radiator flush and new coolent smile.gif

aussiemk2
Post #152

QUOTE (clutch-monkey @ Apr 8 2011, 09:01 AM) *
took the wheels to go get powdercoated.. maybe didn't need the patrol to lug them around mamoru.gif



what stud pattern are they?

clutch-monkey
Post #153

4x4"

Rancher
Post #154

cut and polished, waxed (except.. with this stuff thats not wax)

dazzazoo
Post #155

new rocket cover gasket and tube seals, new plugs changed 17k old oil new gearbox oil and washed all the oil out of the engine bay ... too much effort

E U R E K A M A D 9 4
Post #156

QUOTE (dazzazoo @ Apr 8 2011, 08:51 PM) *
new rocket cover gasket and tube seals, new plugs changed 17k old oil new gearbox oil and washed all the oil out of the engine bay ... too much effort

squint.gif

OT: looked at it, covered in dust.

chaserface
Post #157

QUOTE (dazzazoo @ Apr 8 2011, 07:21 PM) *
new rocket cover gasket and tube seals, new plugs changed 17k old oil new gearbox oil and washed all the oil out of the engine bay ... too much effort




be specific on which cover the gasket is for?

dazzazoo
Post #158

QUOTE (E U R E K A M A D 9 4 @ Apr 8 2011, 07:30 PM) *
squint.gif

OT: looked at it, covered in dust.



QUOTE (chaserface @ Apr 8 2011, 07:31 PM) *


be specific on which cover the gasket is for?

you guys didnt know my hyundai is rocket propelled? its fully hectic it can keep up with vns

E U R E K A M A D 9 4
Post #159

QUOTE (dazzazoo @ Apr 8 2011, 09:10 PM) *
you guys didnt know my hyundai is rocket propelled? its fully hectic it can keep up with vns



*insert rocketski.jpg*

tongue.gif

chaserface
Post #160

calipers came back from the brake mob all clean. gave it a coat of paint and inserted seals/pistons/dust covers.


matmarhar
Post #161

QUOTE (chaserface @ Apr 8 2011, 08:22 PM) *
calipers came back from the brake mob all clean. gave it a coat of paint and inserted seals/pistons/dust covers.

looks the goods

slokey
Post #162

QUOTE (matmarhar @ Apr 8 2011, 08:29 PM) *
looks the goods

x2.

089JAY
Post #163

Walked past the Falcon...

Picking up the VK/L tomorrow or Sunday

HarleyJace
Post #164

Bought this!




Going to put the grill, headlights and shit back in today, plus a few bits and a pieces that need doing.

slokey
Post #165

That's robthebastard's old car.


Get rid of that kewday sticker as it looks gay.

HarleyJace
Post #166

QUOTE (slokey @ Apr 9 2011, 09:07 AM) *
That's robthebastard'sold car.


Get rid of that kewday sticker as it looks gay.




I know it's robs old car, i know the sticker looks gay, I just picked it up, taking a sticker off it is the least of my concerns when it needs tons of other work done.


Will be good just to see it back on the road.

dazzazoo
Post #167

new fuel filter ... poured the fuel out of the old one came out brown sludge ...
removed aircon belt .... one less squeak coming from engine ....
new leads old ones still covered in oil ....

i really gotta stop spending money on this car :/

matmarhar
Post #168

wheel alignment then put new seats in bodykit going back on tomorrow

DAL32
Post #169



Found $2.70 in it. Running amp cables to the back of the car.

nightcrawler
Post #170

Put a new waterpump in the HZ 4 door and put 2 of my VQ's statesmans up for sale .

trev084
Post #171

QUOTE (DAL32 @ Apr 9 2011, 06:13 PM) *


Found $2.70 in it. Running amp cables to the back of the car.


WTF is that crunchie looking fucking thing?

E U R E K A M A D 9 4
Post #172

QUOTE (trev084 @ Apr 9 2011, 08:12 PM) *
WTF is that crunchie looking fucking thing?


Plug for the Airbag unit amirght?

Joyrid3r
Post #173

QUOTE (E U R E K A M A D 9 4 @ Apr 9 2011, 06:51 PM) *
Plug for the Airbag unit amirght?


I think trev is referring to the colours laugh.gif dunno.gif

trev084
Post #174

QUOTE (Joyrid3r @ Apr 9 2011, 06:54 PM) *
I think trev is referring to the colours laugh.gif dunno.gif


bowrofl.gif

This.

E U R E K A M A D 9 4
Post #175

My mind is full of fuck.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 5 of 66
Jump to page
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x