Back

 What Did You Do On Your Car Today+ - V2.0  

Page 3 of 66
Jump to page
Post Topic
truffles
Post #71

[quote name='trev084' post='1287233685' date='Apr 2 2011, 03:09 PM']Chaserface, about fucking time.[/quote]

This.

Finished cutting/polishing my repainted fuel flap, used a wetdry vac to to the floormats and replaced some bolts in the engine bay.

aussiemk2
Post #72

put the old afm back in dialled in some more fuel pressure, backed of the timing now runs much better

No-rice
Post #73

changed the rear pads, and bled the rears too.
But the pedal is still soft ;) :(

the_random_hero
Post #74

I am meant to be dropping the engine out but I got drunk instead.

Twat In The Hat
Post #75

Water pump started leaking so pulled that off, cleaned it up, refit it with a new gasket.

Rileys
Post #76

- upgraded the ground for my amps....also added another battery to chassis ground
- pulled the cluster out to see why some of the lights werent working - found some dodgy LEDs, some were just around the wrong way, replaced most of them so they are all the same colour - its great to be able to see the whole dash at night now
- LED panels in the footwells, dome light, map lights and boot

just had a look at my rear shocks.....they are way too stiff and i found out that they are shocks + springs and not coilovers so they either have hard springs or the shocks are rooted :/

autech_s15
Post #77

Finished off the dynamat in the cabin today

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0038-1024x764.jpg[/img]

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0036-1024x764.jpg[/img]

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0035-1024x764.jpg[/img]

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0040-1024x764.jpg[/img]

And some more interior goes back in

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0039-1024x764.jpg[/img]

089JAY
Post #78

Chaserface, how did you do the white lettering on your sidewalls?

chaserface
Post #79

gona run a cage?

chaserface
Post #80

[quote name='089JAY' post='1287237895' date='Apr 3 2011, 07:32 PM']Chaserface, how did you do the white lettering on your sidewalls?[/quote]

thats how i got them ;)

but i see all the cool kids just colour it out wth white paint pen or white out. i won't be doing this though. i don't think it suits my car.

089JAY
Post #81

[quote name='chaserface' post='1287237910' date='Apr 3 2011, 07:35 PM']thats how i got them ;)[/quote]

Really? My 595's didn't have them... I think it suits especially with the White Wheels...

chaserface
Post #82

[quote name='089JAY' post='1287237926' date='Apr 3 2011, 07:38 PM']Really? My 595's didn't have them... I think it suits especially with the White Wheels...[/quote]

when i say "thats how i got them" i mean the guy i got the wheels from did this. i would only do it if i had goodyear tyres lol.

E U R E K A M A D 9 4
Post #83

[quote name='autech_s15' post='1287237859' date='Apr 3 2011, 08:53 PM']Finished off the dynamat in the cabin today

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0038-1024x764.jpg[/img]

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0036-1024x764.jpg[/img]

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0035-1024x764.jpg[/img]

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0040-1024x764.jpg[/img]

And some more interior goes back in

[img]http://www.obnxsh.com/blog/wp-content/uploads/2011/04/IMG_0039-1024x764.jpg[/img][/quote]

Planning on running an intense sound system or?..... ;)

autech_s15
Post #84

[quote name='chaserface' post='1287237900' date='Apr 3 2011, 07:33 PM']gona run a cage?[/quote]

Nah man, going to make up for it elsewhere. Going to be running one of these:

[img]http://www.speedalliance.com/images/Cusco/strut_toward_bar/Strut_tower_bar/Type_OS-T.jpg[/img]

And one of these:

[img]http://www.aspecperformance.com/images/circuit%20sports%20s13%20trunk%20brace.jpeg[/img]

autech_s15
Post #85

[quote name='E U R E K A M A D 9 4' post='1287237936' date='Apr 3 2011, 07:41 PM']Planning on running an intense sound system or?..... ;)[/quote]

No :(

Dynamat isn't just for stereos. It's for road noise, comfort and temperature. Air con will sit nicely instead of fluctuating.

chaserface
Post #86

[quote name='autech_s15' post='1287237954' date='Apr 3 2011, 07:44 PM']No ;)

Dynamat isn't just for stereos. It's for road noise, comfort and temperature. Air con will sit nicely instead of fluctuating.[/quote]

my workmates zf fairlane is full of that stuff to. he says its great. also i have been in a s13 roll before. it holds up very good, really no need for a full cage. chassis/strut braces should be sweet. personally i cbf/cant afford getting any sort of bracing for my car. but i probably should.

turbo x-trail
Post #87

Fixed an exhaust leak! wastegate - > manifold join was leaking. gasket was fooked.

Sexy new dump:
[img]http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/200414_10150187224682905_526132904_8156364_5862422_n.jpg[/img]
new vs. old:
[img]http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/190539_10150187224172905_526132904_8156355_2544383_n.jpg[/img]


;)

autech_s15
Post #88

[quote name='chaserface' post='1287237981' date='Apr 3 2011, 07:50 PM']my workmates zf fairlane is full of that stuff to. he says its great. also i have been in a s13 roll before. it holds up very good, really no need for a full cage. chassis/strut braces should be sweet. personally i cbf/cant afford getting any sort of bracing for my car. but i probably should.[/quote]

Highly suggest welding a bar to make up a front power brace. Where your front castor rods bolt into.

Here is a nismo one, but you can easy fab up the oem one.

[img]http://www.sillbeer.com/images/chassis/powerbrace-place.jpg[/img]

chaserface
Post #89

op: finishing touches on the window switches.
[img]http://i464.photobucket.com/albums/rr3/luke111_bucket/DSC00034.jpg[/img]

Anchor
Post #90

Found this shit.

Josh, where did you get your dynamat from and roughly how much was it? Easy to use?

[img]http://img546.imageshack.us/img546/1519/img0496j.jpg[/img]

autech_s15
Post #91

[quote name='Anchor' post='1287238292' date='Apr 3 2011, 08:51 PM']Found this shit.

Josh, where did you get your dynamat from and roughly how much was it? Easy to use?

[img]http://img546.imageshack.us/img546/1519/img0496j.jpg[/img][/quote]

$250 a box from ebay, but I get it locally from one of the car audio shops here for the same price.

If you take your time it can work very well, you just need to cut shit out in the right size or you waste alot.

$250 box gets you 9 sheets or 36 square feet.

Anchor
Post #92

[quote name='autech_s15' post='1287238312' date='Apr 3 2011, 08:54 PM']$250 a box from ebay, but I get it locally from one of the car audio shops here for the same price.

If you take your time it can work very well, you just need to cut shit out in the right size or you waste alot.

$250 box gets you 9 sheets or 36 square feet.[/quote]


[url="http://www.ryda.com.au/Dynamat-10455-Xtreme-Bulk-Pack-p/10455.htm"]http://www.ryda.com.au/Dynamat-10455-Xtrem...ack-p/10455.htm[/url]

??

W1NT3R
Post #93

Attempted to Start it. Failed.

Ripped out Dash and found Wiring loom Hacked up.

Got the shits.

Sat on the net for the rest of the day.

autech_s15
Post #94

[quote name='Anchor' post='1287238337' date='Apr 3 2011, 08:58 PM'][url="http://www.ryda.com.au/Dynamat-10455-Xtreme-Bulk-Pack-p/10455.htm"]http://www.ryda.com.au/Dynamat-10455-Xtrem...ack-p/10455.htm[/url]

??[/quote]

Yeah looks good

andrew12a
Post #95

pulled the sr from my mates s13 ready for the autech engine when it arrives. should be a fast p-plater!
put a set of advan's on the dirty wan
did some skids.
didn't touch the rx7 ;)

chaserface
Post #96

[quote name='andrew12a' post='1287238409' date='Apr 3 2011, 09:11 PM']pulled the sr from my mates s13 ready for the autech engine when it arrives. should be a[b] fast p-plater[/b]!
put a set of advan's on the dirty wan
did some skids.
didn't touch the rx7 ;)[/quote]

oxymoron?

andrew12a
Post #97

[quote name='chaserface' post='1287238479' date='Apr 3 2011, 09:20 PM']oxymoron?[/quote]oxymoron?

E U R E K A M A D 9 4
Post #98

[quote name='andrew12a' post='1287238562' date='Apr 3 2011, 11:12 PM']oxymoron?[/quote]

What he's trying to say is, is he a dumb c[u]u[/u]nt?

andrew12a
Post #99

why do you ask?

Rileys
Post #100

[quote name='Anchor' post='1287238337' date='Apr 3 2011, 08:58 PM'][url="http://www.ryda.com.au/Dynamat-10455-Xtreme-Bulk-Pack-p/10455.htm"]http://www.ryda.com.au/Dynamat-10455-Xtrem...ack-p/10455.htm[/url]

??[/quote]

thats not a bad price at all

Rileys
Post #101

[quote name='autech_s15' post='1287238369' date='Apr 3 2011, 09:04 PM']Yeah looks good[/quote]

how much did you use? trying to get an idea how much ill need to buy for my 180

Slide_thats5
Post #102

well i replaced my waste gate as it was seized open some how, bought all my exhaust gaskets intake and head gasket, got new some cooler pipe made up and ran all new braided fuel line in the engine bay and into the fuel cell in the boot of the gemini coupe i picked up, started pulling the cooler and computer out of the corona will have the motor box and diff and front suspension out tommorrow and then its off the scrape heap, got the next week off work so going to bolt the kframe up and try and this motor sitting in. my mate will be in town for 3 days so he is rewiring the micro tech and making me a new braket for the coils, should be done in a month,, not bad for a coupe that cost 300 and considering the diff is a direct bolt in using the gemini control arms i cant complain. i will throw a full build thread up in a a week or so, only pics i got atm is of the body work and paint so i dotn see the use atm. only thing im going to do is a full service on both motor, box, and do all the gaskets

Evaded Motorsport
Post #103

Cleaned the interior with Innuendo, need to clean the exterior, probably do that tomorrow. Take it down for an insurance quote and try and organise the cage in the next month.

trev084
Post #104

[quote name='Evaded Motorsport' post='1287238864' date='Apr 3 2011, 11:10 PM']Cleaned the interior with Innuendo[/quote]

Did you just spray her on?

:ph34r:

autech_s15
Post #105

[quote name='Rileys' post='1287238688' date='Apr 3 2011, 10:11 PM']how much did you use? trying to get an idea how much ill need to buy for my 180[/quote]

So far, 2 boxes. Hopefully I can finish off the car with one more box.I still have all of the boot and the doors to do yet.

I did the roof, floor pan, pillars everywhere possible really.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 3 of 66
Jump to page
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
Loading...
x