2000 Nissan Silvia S15 S  

Pheonix
  • Pheonix
  • Standard User
  • Member No.: 228,730
  • Joined: 7-August 11
  • Posts: 390
  • From: Brisbane
Post #1 post 20th March 2012 - 07:08 PM
Engine:
SR20DE

Exhaust:
Dual 2.5" Straight through (must confirm)

Suspension:
HSD Coilovers
Front Strut Brace

Wheels:
Driftek 17" x 8.5 5 x 114.3

Modifications:
Aero Body kit (going to replace)
Pod Filter


Stereo Audio / Visual:
Clairon DVD Player
Pioneer 6.5" Splits in the front (possible the back also)
12" Sub and Amp (not sure on load rating)


Estimated Power:
Fuck All..

Future Modifications:
Different wheels (possibly)
New bodykit and paint
New Soundsystem

Just about my new S15 smile.gif excuse the pictures, it needs to have a good wash, i picked it up the other day and haven't had time to do anything. Will upload as I respray/do mods



This post has been edited by Pheonix: Mar 22 2012, 08:58 PM
2000 Nissan Silvia S15 Spec-s
2000 Nissan Silvia S15 Spec-s
2000 Nissan Silvia S15 Spec-s
2000 Nissan Silvia S15 Spec-s
2000 Nissan Silvia S15 Spec-s


--------------------
Signature removed - too big.

Comments

  • Boost Network 0
  • alex338
    Post #2

    doesnt look too bad, but you know you can legally drive turbocharged S15s on their Ps now due to the power to weight ratio rule?

    mark1414
    Post #3

    I saw this last night, its quite loud..

    bustage
    Post #4

    QUOTE (alex338 @ Mar 21 2012, 01:49 PM) *
    doesnt look too bad, but you know you can legally drive turbocharged S15s on their Ps now due to the power to weight ratio rule?


    It's an Autech s15 (non turbo). SR20DE & SR20DET

    Pheonix
    Post #5

    QUOTE (mark1414 @ Mar 21 2012, 01:51 PM) *
    I saw this last night, its quite loud..

    Lul whereabouts? Would be between Mt Gravatt - Carindale or Mt Gravatt - Chappell Hill.

    Pheonix
    Post #6

    Nvm I remember you said you lived at Carindale

    azitiz
    Post #7

    QUOTE (alex338 @ Mar 21 2012, 02:49 PM) *
    doesnt look too bad, but you know you can legally drive turbocharged S15s on their Ps now due to the power to weight ratio rule?



    ...what???

    elaborate please

    mark1414
    Post #8

    QUOTE (Pheonix @ Mar 21 2012, 01:54 PM) *
    Lul whereabouts? Would be between Mt Gravatt - Carindale or Mt Gravatt - Chappell Hill.


    You were idling outside my house, I was wondering what the racket was. Damm kids and their noisy exhaust systems.

    Pheonix
    Post #9

    QUOTE (mark1414 @ Mar 21 2012, 02:14 PM) *
    You were idling outside my house, I was wondering what the racket was. Damm kids and their noisy exhaust systems.

    You're the one with the 350GT? If so, sorry we were having trouble getting into the driveway :l

    Nismo_GT-R
    Post #10

    ahhh u recently bought this aye?

    Pheonix
    Post #11

    QUOTE (Nismo_GT-R @ Mar 21 2012, 02:24 PM) *
    ahhh u recently bought this aye?

    Yesh?

    Ticc
    Post #12

    its so stolen^^^

    Pheonix
    Post #13

    O.o

    I brought it on monday.

    pinkydk2m
    Post #14

    You can't drive s15's on your P's don't listen to that dude -__-
    You can drive a turbo/supercharged car if it's power to weight ratio is 125kw/tonne or under.

    Pheonix
    Post #15

    It's good it's not a turbo then smile.gif

    pinkydk2m
    Post #16

    QUOTE (Pheonix @ Mar 21 2012, 03:41 PM) *
    It's good it's not a turbo then smile.gif

    Yeah I know man it's a nice car. Just annoys me when people obviously have problems with basic mathematics and talk rubbish on forums because somebody else said it's true.
    You gonna keep it black on black dude?

    pinkydk2m
    Post #17

    Btw when I say "you can't drive s15's", I mean sr20det's, obviously sr20de's are all deezy.

    Pheonix
    Post #18

    Hahaha yeah tongue.gif I wasn't going to risk it with a turbo anyways, i'd get sick of being pulled over.

    Thanks man, I need to get the kit replaced (one of the previous owners has some hectic drift dammage - he hit a pole), and the front bar is farked.

    So I'll keep it like it is for now, I need to change my indicators because it passed a road worthy, other than that idk.

    Marko92mmm
    Post #19

    tint taillights

    Pheonix
    Post #20

    In time my friend,

    Need to fix everything before. Going to look so derro at Harry's V.V

    Pheonix
    Post #21

    Anyone know where to indicators?

    pinkydk2m
    Post #22

    Ebay...
    And fuck Harry's haha go to Archy smile.gif

    Pheonix
    Post #23

    Arcy then harry's* wink.gif

    Astra Boi
    Post #24

    nice car dude drive wat yu want just dont get caght

    Pheonix
    Post #25

    Thanks man, the worst I do is floor it to the speed limit, and i generally only do that late at night.

    ajr1990
    Post #26

    very nice. These go hard for an n/a!

    OEMJDMFTW
    Post #27

    it's probably a cheap respray, no offence. Autechs never came in black, so it's been resprayed and by the looks of front bumper, very poorly.

    You should totally do a 20v VE head swap, n1 cams, tune, and get a higher final drive. You already have sufficient intake and headers being an autech model, plus autech compression is already ideal so pistons would not be needed. Would have a 170ishrwkw mad P-plate legal weapon. Seeing as it's just a head swap so police would be none the wiser. all for around 8k.

    gutless
    Post #28

    QUOTE (alex338 @ Mar 21 2012, 01:49 PM) *
    doesnt look too bad, but you know you can legally drive turbocharged S15s on their Ps now due to the power to weight ratio rule?

    You Cant drive Turbocharged S15 Silvias.

    QUOTE (bustage @ Mar 21 2012, 01:52 PM) *
    It's an Autech s15 (non turbo). SR20DE & SR20DET

    If you're saying this S15 is an Autech, its not. Just a JDM Spec-S

    QUOTE (pinkydk2m @ Mar 21 2012, 03:40 PM) *
    You can't drive s15's on your P's don't listen to that dude -__-
    You can drive a turbo/supercharged car if it's power to weight ratio is 125kw/tonne or under.

    Are you talking about Just Silvias or any Turbochared S15?

    QUOTE (Marko92mmm @ Mar 21 2012, 03:59 PM) *
    tint taillights

    Yeah fuck that. You're a fucking Cunt if you do this to your car. As much as it may look pretty fuckin cool, Other motorists can barely see your fucking brake lights which is just fucked. Someone could die because you wanted to illegally make your tail lights cool.
    Fuck.

    QUOTE (OEMJDMFTW @ Mar 21 2012, 04:52 PM) *
    it's probably a cheap respray, no offence. Autechs never came in black, so it's been resprayed and by the looks of front bumper, very poorly.

    You should totally do a 20v VE head swap, n1 cams, tune, and get a higher final drive. You already have sufficient intake and headers being an autech model, plus autech compression is already ideal so pistons would not be needed. Would have a 170ishrwkw mad P-plate legal weapon. Seeing as it's just a head swap so police would be none the wiser. all for around 8k.

    When did he say it was an Autech? Its not. Just a JDM Spec-S.


    OT:Looks decent mate.
    Give it a bath and some good TLC. Good luck with it.

    yehl67
    Post #29

    give it a wash

    other then that not bad thumbsup.gif

    the sticker made me laugh to...

    skidin
    Post #30

    looks like my s15 on forza4 haha

    slyder1
    Post #31

    i like it how it is.. but i am confused why are people saying you cant drive the spec-s sr20det on the P's??

    Certificate of exemption for driving a high-powered (performance) vehicle

    If you hold a P1 or P2 licence you may be eligible for a certificate of exemption to enable you to drive a high-powered (performance) vehicle. Please read the Certificate of Exemption high-powered vehicle Information Sheet (form S4478) for further information.

    You are eligible to apply for an exemption to drive a high-powered (performance) vehicle if you can prove that one of the following circumstances applies to you.


    1. Moderately-powered turbocharged or supercharged vehicle

    You may apply for a certificate of exemption if the vehicle you wish to drive meets all of the following:
    •has a turbocharged or supercharged engine that is not diesel powered
    •has a power-to-weight ratio of not more than 125kW/t
    •does not have any other features of a high-powered vehicle as outlined above.

    The power-to-weight ratio means the ratio (expressed in kilowatts per tonne) calculated by dividing the car’s maximum engine power in kilowatts by the kerb weight and multiplying the product of the division by 1000. For example, the power to weight ratio of a vehicle that has a maximum engine power of 195kW and a kerb weight of 1667kg would be calculated as follows: (195÷1667) × 1000 = 117kW/tonne

    Check if your vehicle is a moderately-powered turbocharged or supercharged vehicle*.


    now i dont know 100% the specs on the sr20 or the spec-s but according to redbook

    Power = 147kW @ 6400rpm
    Kerb Weight (kg) = 1265

    Therefore 147/1265 x 1000 = 116.21kW/tonne

    To me that is under the 125kW/tonne limit??

    gutless
    Post #32

    QUOTE (slyder1 @ Mar 21 2012, 05:37 PM) *
    i like it how it is.. but i am confused why are people saying you cant drive the spec-s sr20det on the P's??

    Certificate of exemption for driving a high-powered (performance) vehicle

    If you hold a P1 or P2 licence you may be eligible for a certificate of exemption to enable you to drive a high-powered (performance) vehicle. Please read the Certificate of Exemption high-powered vehicle Information Sheet (form S4478) for further information.

    You are eligible to apply for an exemption to drive a high-powered (performance) vehicle if you can prove that one of the following circumstances applies to you.


    1. Moderately-powered turbocharged or supercharged vehicle

    You may apply for a certificate of exemption if the vehicle you wish to drive meets all of the following:
    •has a turbocharged or supercharged engine that is not diesel powered
    •has a power-to-weight ratio of not more than 125kW/t
    •does not have any other features of a high-powered vehicle as outlined above.

    The power-to-weight ratio means the ratio (expressed in kilowatts per tonne) calculated by dividing the car’s maximum engine power in kilowatts by the kerb weight and multiplying the product of the division by 1000. For example, the power to weight ratio of a vehicle that has a maximum engine power of 195kW and a kerb weight of 1667kg would be calculated as follows: (195÷1667) × 1000 = 117kW/tonne

    Check if your vehicle is a moderately-powered turbocharged or supercharged vehicle*.


    now i dont know 100% the specs on the sr20 or the spec-s but according to redbook

    Power = 147kW @ 6400rpm
    Kerb Weight (kg) = 1265

    Therefore 147/1265 x 1000 = 116.21kW/tonne

    To me that is under the 125kW/tonne limit??

    Not talking about Australian Spec-S.
    Talking about the JDM Spec-R(183KW).

    sr_silvia
    Post #33

    This is an auto ay? I wanted to buy this but fell short. Nice car smile.gif

    niSSSdan
    Post #34

    QUOTE (OEMJDMFTW @ Mar 21 2012, 04:52 PM) *
    You should totally do a 20v VE head swap, n1 cams, tune, and get a higher final drive. You already have sufficient intake and headers being an autech model, plus autech compression is already ideal so pistons would not be needed. Would have a 170ishrwkw mad P-plate legal weapon. Seeing as it's just a head swap so police would be none the wiser. all for around 8k.


    Fuck off, stop acting like you know what you're on about. For one, gl finding a 20v head for a decent price, would be a shit tonne easier to just get an ordinary 16 or 20VE head and do the work to that, differences in flow are marginal and aftermarket ecu would be needed either way so going back to dizzy from coil on plugs wouldn't be much extra work. The thing I love is that you reckon it'll make 170kw atw bowrofl.gif
    Mate, with the mods you've listed and staying 2 litre you'd be fucking cheeeeering if you got 140kw to the rears! Pulsars/primeras et. all fwd VE cars would be struggling to make 140 at the fronts with those mods, let alone sending that power all the way down the bum.

    Keep dreaming smile.gif

    75 KINGSWOOD
    Post #35

    QUOTE (niSSSdan @ Mar 21 2012, 08:45 PM) *
    Fuck off, stop acting like you know what you're on about. For one, gl finding a 20v head for a decent price, would be a shit tonne easier to just get an ordinary 16 or 20VE head and do the work to that, differences in flow are marginal and aftermarket ecu would be needed either way so going back to dizzy from coil on plugs wouldn't be much extra work. The thing I love is that you reckon it'll make 170kw atw bowrofl.gif
    Mate, with the mods you've listed and staying 2 litre you'd be fucking cheeeeering if you got 140kw to the rears! Pulsars/primeras et. all fwd VE cars would be struggling to make 140 at the fronts with those mods, let alone sending that power all the way down the bum.

    Keep dreaming smile.gif


    8g just for a head swap??? wouldn't it be easier just to wait until hes on his opens, then spend 8k on a turbo and some other modifications?




    Car looks good mate, black suits the car very well thumbsup.gif

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Login with Facebook

      Login using your Facebook account!

14 User(s) are reading this topic (14 Guests and 0 Anonymous Users)
0 Members:
Loading...
x