Xr6 Turbo Thread - Post your car  

Page 2 of 5
Jump to page
TXR05
Post #36

not liking the power on mine anymore.... too slow...

sicks13
Post #37

As for owner of thisso well use to be did you build and put a motor in it cos I was told it has a stock fg motor in it and making 600hp on e85??

RIPGTR
Post #38

yep u got me its a completely stock standard motor "facepalm". just because u were told something doesnt mean it was true, how about u take my word for it and stop trying to stir.

to define it -
its an atomic engine with standard FG rods in it at the moment running an M800 computer. New fat rods should be going in soon, then it should be a reliable 850hp. saying that tho anything about 600hp on the street in this ute is pointless coz it cant get the power down, which is y i run street slicks on the back now.

comon ppl keep this topic alive! lol

bf_jet
Post #39

haha this a laugh....hahahaha ^^^^^^^^^^^^^^^^^ lol

vy57ss
Post #40

anyone know how much hp wanna go that hi torque f6 is making?

bf_jet
Post #41

yep... 720-730rwhp through T400

51KVN
Post #42

i dont think he asked what gearbox it had rolleyes.gif

sicks13
Post #43

He could possibly be the own hahahaha wanago is a mint car :-)

bf_jet
Post #44

QUOTE (51KVN @ Mar 16 2012, 10:17 AM) *
i dont think he asked what gearbox it had rolleyes.gif



SORRY 51KVN just letting him no for when he asked.. thumbsup.gif

vy57ss
Post #45

nice i love it, was following you when you got booted for doing a skid at powerplay last year, have you had any good runs with yutryn were both hooked up?

Luke gc
Post #46

Hey fellas

i noticed your thread, i used to work at ford when i was a youngster detailing, around the time of the first and second gen xr6t ba II or whatevers its been a while?,

anyways a few of the mechanics had xr6t and they all put the f6 program in using the factory laptop thingo (alot bigger and high tech than a laptop)

and with no more than that little change they could all keep up with the boss in his f6 biggrin.gif
although they did say its not good for the engine over the long run

anyone else done this heard about it?

might be common ford knowledge i dont know?

cheers

RIPGTR
Post #47

Gotta admit maddicks wana go is a well built car, starting to think u got a better gearbox combo than I did lol. Urs would hook up better than mine too being a sedan. Still good fun tho lol

SENATOR94
Post #48

QUOTE (matt3862 @ Mar 15 2012, 05:07 PM) *
I got no pics as I'm on my phone but I've got a bf sedan .. Makes 454 hp on a safe tune .. Got x force 4"dump into xforce system , fuel pump , valve springs , stage 3 inter cooler process west plenum and 14psi boost .. Not bad I think for the amount of money... Got potential for big hp with bigger turbo and internals n shit

and i bet it still loosen's the intake and exhaust manifolds lol

Anchor
Post #49

QUOTE (SENATOR94 @ Mar 16 2012, 11:41 AM) *
and i bet it still loosen's the intake and exhaust manifolds lol


Such a pain in the ass. I always got the guys @ work to do two extra things at every service. Check ALL manifold/turbo bolts and replace the inline turbo oil filter.

wilba
Post #50

09 fg xr6t
ba-bf turbo with flapper mod
surge tank and pump
zf
cooler and intake
4' dump into stock 3'
12.2 at 119mph that the best i could do with the tyres i had on at the time
348rwkw


now i have a full 3 1'2 zorst just waiting to get a retune


 
wilba
Post #51

powerplay


Attached File  eeee.wmv ( 5.7MB ) Number of downloads: 118
 
RIPGTR
Post #52

lookin good wilba thumbsup.gif

force6alex
Post #53

RIPGTR have you got any vids of your car mate.

JmeCamo
Post #54

im tossing up which xr6t ute to get,

ba bf or fg.

Pros and Cons?

This is not a i "wanna" get one, I actually am getting one within a month Maybe 2 if i dont find one i like.

RIPGTR
Post #55

na mate not yet just had too much other shit to do with rebuild this ski boat and all, should whip out the go pros and take some footage lol

JmeCamo - id go BF and spend a little money getting the car the way you want it looking rather than buying an FG. unless u like the FG the way it is off the shelf from ford.

ps dont go with the ba engine they are weaker than the other 2

henz
Post #56

Hey guys.

This is my xr6 turbo ute

Tuned by Pitlane Performance.

2007 bf2 (typhoon motor)
T56- stock clutch still
Plazmaman plenum
Plazmaman 1000hp cooler
Plazmaman hot and cold side piping
Plazmaman billet oil cap
Custom 4" intake
9" knN

Ported stock turbo with 12psi actuator
Xforce 4" dump
Rapidsystems 5" cat. 12minths old and starting to rattle.
Stock catback.

358rwkw @16psi
[email protected]






force6alex
Post #57

QUOTE (JmeCamo @ Mar 18 2012, 03:30 PM) *
im tossing up which xr6t ute to get,

ba bf or fg.

Pros and Cons?

This is not a i "wanna" get one, I actually am getting one within a month Maybe 2 if i dont find one i like.


you can get a fpv tornado for about the same price as a fg ute i would probably get a tornado over a fg ute but i would probably get a fg over a bf xr6 turbo
and i would avoid a ba unless your going to go crazy with mods such as atomic motor and a built gearbox.

force6alex
Post #58

QUOTE (bf_jet @ Mar 16 2012, 09:52 AM) *
yep... 720-730rwhp through T400


i was just reading 1 of my older street fords magazines with your car in it. your car looks awesome as well as being a animal. bowrofl.gif

TXR05
Post #59

thats not a FPV motor... good luck with your clutch too.

QUOTE (henz @ Mar 18 2012, 07:31 PM) *
Hey guys.

This is my xr6 turbo ute

Tuned by Pitlane Performance.

2007 bf2 (typhoon motor)
T56- stock clutch still
Plazmaman plenum
Plazmaman 1000hp cooler
Plazmaman hot and cold side piping
Plazmaman billet oil cap
Custom 4" intake
9" knN

Ported stock turbo with 12psi actuator
Xforce 4" dump
Rapidsystems 5" cat. 12minths old and starting to rattle.
Stock catback.

358rwkw @16psi
[email protected]







force6alex
Post #60

nice ute henz would be fun. seen your ute on falconxr6turbo.net sounnded pretty sweet with the dose pipe lol

kizzlemynizzle
Post #61

My 2010 FG XR6T manual
pedders lowered springs and leafs
K&N pod filter
full exhaust
doso pipe
19x9.5 all round, wrapped in toyo's


 
force6alex
Post #62

QUOTE (kizzlemynizzle @ Mar 19 2012, 06:49 PM) *
My 2010 FG XR6T manual
pedders lowered springs and leafs
K&N pod filter
full exhaust
doso pipe
19x9.5 all round, wrapped in toyo's


got to love ego best colour in my opinion thumbsup.gif

henz
Post #63

QUOTE (TXR05 @ Mar 18 2012, 10:29 PM) *
thats not a FPV motor... good luck with your clutch too.


Yes it is. 2007 build mate. Clutch would be cactus if I drove it hard. But I can't decide weather to do a clutch or a 2-3speed.


QUOTE (force6alex @ Mar 19 2012, 06:17 PM) *
nice ute henz would be fun. seen your ute on falconxr6turbo.net sounnded pretty sweet with the dose pipe lol



Cheers mate.

Rancher
Post #64

QUOTE (henz @ Mar 19 2012, 07:22 PM) *
Yes it is. 2007 build mate. Clutch would be cactus if I drove it hard. But I can't decide weather to do a clutch or a 2-3speed.





Cheers mate.


Why did you change the tappet cover and coil pack cover then..?

henz
Post #65

Fpv's come with a dark blue tapet cover. And the same coil cover.

Every turbo falcon built after 06/06 came with same motor as the FPVs (stronger rods, slightly better valve springs than ba turbos)

Fpv started the painted rocker cover, and have carried it through.

Feel free to confirm this on any ford forum, or even call ford spare parts.

Rancher
Post #66

QUOTE (henz @ Mar 19 2012, 08:02 PM) *
Fpv's come with a dark blue tapet cover. And the same coil cover.

Every turbo falcon built after 06/06 came with same motor as the FPVs (stronger rods, slightly better valve springs than ba turbos)

Fpv started the painted rocker cover, and have carried it through.

Feel free to confirm this on any ford forum, or even call ford spare parts.


I'm aware of whats done to the FPV motors. Yours has a red tappet cover, and the standard ford coil pack cover. Surely if you had an FPV motor in it, you'd have left the blue tappet cover, and FPV coil pack cover to show off.

Anchor
Post #67

QUOTE (Rancher @ Mar 19 2012, 09:06 PM) *
I'm aware of whats done to the FPV motors. Yours has a red tappet cover, and the standard ford coil pack cover. Surely if you had an FPV motor in it, you'd have left the blue tappet cover, and FPV coil pack cover to show off.


You're missing his point. It's the same motor regardless of tappet cover colour. Whether it came in an XR6T or a Typhoon.

Rancher
Post #68

QUOTE (Anchor @ Mar 19 2012, 10:30 PM) *
You're missing his point. It's the same motor regardless of tappet cover colour. Whether it came in an XR6T or a Typhoon.


So why feel the need to mention its an FPV motor..

henz
Post #69

Ahh because it's stronger buddy. I wouldn't push 360 out of a BA motor + stock valve springs.

Doesn't matter how it looks bonnets shut when I drive.

Anchor
Post #70

QUOTE (henz @ Mar 20 2012, 08:12 AM) *
Ahh because it's stronger buddy. I wouldn't push 360 out of a BA motor + stock valve springs.

Doesn't matter how it looks bonnets shut when I drive.


I did. And bashed limiter @ powercruise for 4 days straight with stock oil pump. Tick tock.. oopsie.gif

And it's still going strong with the new owner. Currently up to 140,000 i think. Had a fresh head since the timing chain got caught up and jumped 4 teeth. New head, straight back on the dyno, same tune. Bores looked fresh, only small marks on pistons. Lucky. These things must have a safety if something like that happens. Car shut down straight away.

Also, don't use octane booster. Head and tops of pistons were orange....

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 2 of 5
Jump to page
THIS TOPIC HAS BEEN ARCHIVED
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
Loading...
x