Back

 1993 Nissan Silvia S13  

Upload Entry
Slysilvia
  • Slysilvia
  • Budding User
  • Member No.: 218,561
  • Joined: 19-April 11
  • Posts: 635
  • From: Brisbane
Post #1 post 16th February 2012 - 07:10 PM
Engine: SR20DE 120,000 kms

Exhaust: 2.25 catback exhaust with a xforce twin tip muffler

Suspension: BC Coilovers

Wheels: XXR 002 16x8 -0 Black with polished lip

Modifications: Tomei camshafts, 500cc injectors, Pod, Pacemaker extractors, Shimmed RS200 diff, Nismo rear strutbrace, Adj castor rods/camber arms and other things.

Stereo Audio / Visual: Alpine headunit with JVC splits and tweeters, x2 6x9 type r alpine speakers, option Audio 800wrms monoblock and pioneer sub ( which just blew up lol )

Estimated Power: Not sure.

I hope you guys like this clean S13, Since owning it I've kept it clean and changed the paint and put the front aero bar and got some genuine silvia floor mats. It sits @ 120MM, I havent had any cop trouble as of yet i would love to lower it but not worth it atm.

Future plans;
Aero side skirts ( have need touching up + painted )
Nardi steering wheel
S15 rear seats ( have no fitted )
Work Meisters S1 2p ( still undecided )
Roof spoiler
Walbro fuel pump
Maybe lower it

This post has been edited by Slysilvia: Feb 16 2012, 07:20 PM
1993 Nissan Silvia S13
1993 Nissan Silvia S13
1993 Nissan Silvia S13
1993 Nissan Silvia S13
1993 Nissan Silvia S13
1993 Nissan Silvia S13
1993 Nissan Silvia S13


--------------------
'REPPIN.
TOP

Comments

  • Boost Network 0
  • sr_silvia
    Post #2

    One of the best out there in NA form, could be 10mm lower but that's just me smile.gif

    Edit: Roof spoiler would set this off.

    thomo(00_00)
    Post #3

    Nice man, def needs to be lower but at the same time it's not really worth the cop attention. Cool future mods list too, should look mint.

    Dazza9421
    Post #4

    Very clean, Hope u keep it that way! Agree with been lower smile.gif

    socal
    Post #5

    Holy shit, an N/A S13 that doesn't look like shit! Looks really nice mate, congrats on a nice clean Sil smile.gif

    What are the specs of the Meisters?

    Slysilvia
    Post #6

    Thanks guys, I'll be lowering in the future. I'm still waiting to hear from JDM Garage about a Origin Roof spoiler.

    As for meisters, I'm not really sure on what offset yet as i haven't measured it up and I'm still debating it whether i keep this car or not as they're around the 3k mark, But should be like 17x8.5 maybe +9 I'm not sure.

    Gerry Giraffe
    Post #7

    Very fucking nice mate! Great to see a clean p plater s13. Top work!

    Dai.
    Post #8

    Nice clean and simple. I'd say spend the money and keep it clean.

    gutless
    Post #9

    Looks the goods man smile.gif

    jamesjgts25t
    Post #10

    Looks tough.

    Who dat
    Post #11

    Looks awesome and plans sound dope!

    Goes_over_everything
    Post #12

    I was beside you in VP the other day. Looks clean as

    pat_b08
    Post #13

    Wow that's the cleanest P plater S13 i have seen in a LONG time. That looks pretty high for 120mm though, might just be the photos... Good luck with the future plans!

    NOL499
    Post #14

    QUOTE (sr_silvia @ Feb 16 2012, 07:26 PM) *
    One of the best out there in NA form, could be 10mm lower but that's just me smile.gif

    Edit: Roof spoiler would set this off.


    10mm = 1cm, dont you mean 100mm? smile.gif

    8URVTEC
    Post #15

    very nice!
    just needs moar lowa!

    R31
    Post #16

    very nice mate! also good choice with the s15 seats!

    01BEN
    Post #17

    Mate that is really nice. No cracks in the dash +++. I wouldn't lower it too much more if you want to keep the cop attention away, a mate of mine got done for 94mm. Apparently you can get all sorts of Jap wheels from Import Monster if you're after Work wheels but don't quote me on that.

    Slysilvia
    Post #18

    QUOTE (Goes_over_everything @ Feb 17 2012, 06:41 AM) *
    I was beside you in VP the other day. Looks clean as


    Haha yeah would of been me wink.gif


    QUOTE (pat_b08 @ Feb 17 2012, 09:28 AM) *
    Wow that's the cleanest P plater S13 i have seen in a LONG time. That looks pretty high for 120mm though, might just be the photos... Good luck with the future plans!



    Thanks, Well from the lowest part of the car its like 125mm to be exact, When i bought it was like 160mm? I had dropped it to 95mm or close enough but it was hitting, so adjusted the camber and it sat nice but as i said, I'd prefer no cop trouble haha. Also cause they wheels are only 16's to.


    QUOTE (01BEN @ Feb 17 2012, 05:04 PM) *
    Mate that is really nice. No cracks in the dash +++. I wouldn't lower it too much more if you want to keep the cop attention away, a mate of mine got done for 94mm. Apparently you can get all sorts of Jap wheels from Import Monster if you're after Work wheels but don't quote me on that.


    Cheers, Yeah that's it aye. I've had a cop look at me and said " That's a clean example of a silvia " and he went on his way /thank god lol. I'll look into it, Thanks.

    Subiecruisin
    Post #19

    SO SO SO SO CLEAN!!! dont crash it -.-

    Protius
    Post #20

    If this is the one I'm thinking it was, the old colour looked better. But good work keeping it clean!

    Slysilvia
    Post #21

    QUOTE (Protius @ Feb 22 2012, 09:33 PM) *
    If this is the one I'm thinking it was, the old colour looked better. But good work keeping it clean!


    Stans? The old colour was cool i agree.

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Forgotten your password?
    • Login with Facebook

      Login using your Facebook account!

5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
Loading...
x