1994 Ford Falcon GLI EF  

Chris_Rogers_01
  • Chris_Rogers_01
  • Standard User
  • Member No.: 205,774
  • Joined: 1-November 10
  • Posts: 66
  • From: Palmwoods
Post #1 post 5th February 2012 - 09:06 PM
Okay guys here is my story after owning a 2004 Mitsubishi Magna vrx i decided to sell it and buy myself a more cheaper to modify vehicle my Aunt and Uncle and thier parents have owned this 94 Ford Falcon Gli for most of its life its just hit around 203,000km and has been mostly well maintained as to helping them out i bought the vehicle with 6 months rego and a road worthy for $1,000 which i couldn't pass and i have many memories in this car being younger and i hope to get it into the condition i hope it to be...a Single Turbo E Series Falcon...Enjoy and feel free to give any advice smile.gif Cheers Chris.


Engine/Exhaust/Transmission: 3" Intake which consists of EL 3" piping a 3" steel piece with 3" Pod Filter attached into air box (Cut To Fit) That is connected to a SS Inductions big mouth piece, NKG spark plugs, top gun ignition leads, changed brand new oil Penrite 20 - 60 with new filter, did full coolant flush with a special mix coolant, did a Lupice gearbox additive, Nulon oil flush prior to putting it in, Tickford computer, new radiator + hoses and cleaned the injectors with a special fluid, 3:23 Limited Slip Diff with a Shift kit, heavy duty battery terminals, painted the rocker cover (Tickford Red), (Next steps are as follows a cam upgrade, full gearbox rebuild with changing Solenoids and seals with a stall converter set around 2500 - 3000 a full 2.5 Mandrel bend exhaust with Hi flow cat and Jim Mock Red Back headers and then a aftermarket computer with tune)

Electrical: Alarm, trip computer and Ex Cop Fairmont police cluster, doing the courtesy Fairmont light conversion (All lights are fitted with White LED'S, parking sensors, reverse camera, UHF radio (picks up police stations but remains looking like a stock radio can travel 180km)

Interior: Fairlane Ghia Leather seats, Fairmont (Tan/Coffee colored) center console and Steering wheel, Genuine Momo Italy automatic gear knob, White LED bulbs in all lights on dash and roof + extra Fairmont Courtesy lights, Shift light gauge mounted on drivers side dash near pillar, Fairmont chrome door handles

Exterior: Longer airel for my UHF, EL Falcon tail lights, Fairmont full boot lid conversion with chrome number plate surrounds/garnish, used cutting compound on headlights to restore the natural whiteness, EF Fairmont complete front end with bonnet, headlights and front bumper resprayed same color also respraying the mirrors, some other panels and took off the exterior trims, 2x Tickford Badges, Custom plates WQHOO Simpson Themed, (upgrading to a DL LTD Grill and Darkest legal tint)

Mechanical/Brakes/Suspension: King springs super low's with shortened KYB shocks, 3.23 Ratio Limited slip diff fully rebuilt with upgraded oil. (Next steps are doing a rotor and pad upgrade a full Nolathane bush kit and Coil overs)

Sound/Visual: Response head unit with screen for reverse camera 4x 6 Inch speakers 2 front and 2 rear (with added spacers) and 4x 6X9 speakers 2x parcel shelf and 2x in boot, 2x amplifiers will run 4 speakers each and my Mono block JBL GTO1201.1 running 2x 12 inch Vifa Subs with the whole setup i plan to buy wooden board sheets and cut them to fit inside my boot and mount the amplifiers on that im using high quality wiring and other gear ill get more information on that Phillip Crystal Vision head light bulbs,

Wheels/Tyres: I currently have 15x7 EB XR8 wheels with average quality tyres and ill restore and paint the wheels a dark silver (Similar to a BA/BF F6 Wheels)

I have not finished with the Fairmont front end or the sound system + other little bits just yet so ill get pictures for you guys as soon as possible Thanks.



1994 Ford Falcon Gli Ef
1994 Ford Falcon Gli Ef
1994 Ford Falcon Gli Ef
1994 Ford Falcon Gli Ef
1994 Ford Falcon Gli Ef
1994 Ford Falcon Gli Ef
1994 Ford Falcon Gli Ef
1994 Ford Falcon Gli Ef
1994 Ford Falcon Gli Ef
1994 Ford Falcon Gli Ef

Comments

  • Boost Network 0
  • sdf4lyfe
    Post #2

    not bad for a coonie

    jo88
    Post #3

    fuck mate ud be the most popular guy in woodridge with a ride like that

    Chris_Rogers_01
    Post #4

    Thanks for all the feedback guys its really good smile.gif

    Dai.
    Post #5

    QUOTE (jo88 @ Feb 5 2012, 09:15 PM) *
    fuck mate ud be the most popular guy in woodridge with a ride like that

    Says the guy with a shit heap excel. Good luck restoring it.

    the70series
    Post #6

    pretty sure thats el front end..

    Chris_Rogers_01
    Post #7

    QUOTE (Dai. @ Feb 5 2012, 09:24 PM) *
    Says the guy with a shit heap excel. Good luck restoring it.



    Lol cheers mate hopefully in a few years ill have my turbo conversion done just doing allot of research before then smile.gif

    Chris_Rogers_01
    Post #8

    QUOTE (the70series @ Feb 5 2012, 09:25 PM) *
    pretty sure thats el front end..


    The ones in the picture is a GLI EF front end the Fairmont front end isn't included in these pictures as it hasn't been finished yet if you Google search you will notice a big difference in the GLI front ends

    butler88
    Post #9

    QUOTE (Chris_Rogers_01 @ Feb 5 2012, 09:27 PM) *
    The ones in the picture is a GLI EF front end the Fairmont front end isn't included in these pictures as it hasn't been finished yet if you Google search you will notice a big difference in the GLI front ends


    he knows how to use google, good job.

    Chris_Rogers_01
    Post #10

    QUOTE (butler88 @ Feb 5 2012, 09:32 PM) *
    he knows how to use google, good job.



    Lol indeed

    djshannon
    Post #11


    huge white 4x4 antenna looks stupid on the back..your not gonna get out any better in comparasion against a normal 6db ground inpendent antenna.

    Chris_Rogers_01
    Post #12

    QUOTE (djshannon @ Feb 5 2012, 09:41 PM) *
    huge white 4x4 antenna looks stupid on the back..your not gonna get out any better in comparasion against a normal 6db ground inpendent antenna.



    Its actually not that large of an antenna pre small ill upload a picture of it i got it for freebie smile.gif

    jo88
    Post #13

    QUOTE (Dai. @ Feb 5 2012, 09:24 PM) *
    Says the guy with a shit heap excel. Good luck restoring it.

    excel is my daily dickhead

    _Ben
    Post #14

    Nice and clean coon

    Chris_Rogers_01
    Post #15

    QUOTE (_Ben @ Feb 5 2012, 11:02 PM) *
    Nice and clean coon



    Thanks mate smile.gif

    scottyg938
    Post #16

    good luck with the turbo job, keep an eye on this seller on ebay
    http://www.ebay.com.au/sch/chloexr6/m.html...p;_trksid=p3686

    they bought my old old turbo ef and a few of the parts are coming up for sale now so i'm not sure what happened too it but you might get lucky and score some cheap good quality parts

    McBuddha
    Post #17

    Fuckin huge write up.. for this

    Chris_Rogers_01
    Post #18

    QUOTE (scottyg938 @ Feb 6 2012, 12:00 AM) *
    good luck with the turbo job, keep an eye on this seller on ebay
    http://www.ebay.com.au/sch/chloexr6/m.html...p;_trksid=p3686

    they bought my old old turbo ef and a few of the parts are coming up for sale now so i'm not sure what happened too it but you might get lucky and score some cheap good quality parts


    Will do Cheers mate smile.gif

    Chris_Rogers_01
    Post #19

    QUOTE (McBuddha @ Feb 6 2012, 12:36 AM) *
    Fuckin huge write up.. for this



    Lol i wanted to make sure i have listed everything i possible could for the build as allot of stuff has been done in the past couple of months my Aunt and Uncle can barely recognize it

    Dai.
    Post #20

    QUOTE (jo88 @ Feb 5 2012, 10:31 PM) *
    excel is my daily dickhead

    And?..Still a shit heap that i would NEVER be seen in. You own a crappy skyline aswell?

    VRVACATIONER
    Post #21

    QUOTE (McBuddha @ Feb 6 2012, 01:36 AM) *
    Fuckin huge write up.. for this


    hahahaha bowrofl.gif bowrofl.gif bowrofl.gif bowrofl.gif bowrofl.gif

    Chris_Rogers_01
    Post #22

    Okay guys i have thought of a different way for this build i maybe looking at doing a 5.0 V8 Conversion and have got a quote for the full Conversion + shipping so i may start on this now smile.gif

    Chris_Rogers_01
    Post #23

    Turns out the V8's aren't all that great in the E series so im back on the Turbo Build doing a Garret GT35/40 and getting a quote on a dump pipe,piping,Intercooler,BOV all with a tune

    scottyg938
    Post #24

    Keep an eye on that seller i posted if your looking for a garret gt35r cause that's what i had on mine, as well as a turbo smart bov and wastegate.

    Chris_Rogers_01
    Post #25

    QUOTE (scottyg938 @ Feb 7 2012, 07:16 PM) *
    Keep an eye on that seller i posted if your looking for a garret gt35r cause that's what i had on mine, as well as a turbo smart bov and wastegate.


    Do you know roughly what id be expecting to pay for a Garret GT35 Turbo + piping, Turbo Manifold, BOV, Turbo timer, dump pipe and Intercooler, can i use the XR6T intercooler? this was a list my mate told me to get but im not 100% sure what else i need besides from a tune once its done any help will be appreciated smile.gif also has the Ebay seller crashed his car or something?

    scottyg938
    Post #26

    you will need an aftermarket ECU and upgraged fuel system, the XR6T cooler should be fine for the power you will get from it, mine got 212KW at a dyno day although apparently the dyno was reading low from what others where saying.

    Can't remember how much it all ended up costing me, i gave up on keeping total after a while.

    No idea what happened to the car, when i sold it to them they where going to use it as a drift car, now a few parts a popping up so not really sure.

    Chris_Rogers_01
    Post #27

    QUOTE (scottyg938 @ Feb 8 2012, 10:24 AM) *
    you will need an aftermarket ECU and upgraged fuel system, the XR6T cooler should be fine for the power you will get from it, mine got 212KW at a dyno day although apparently the dyno was reading low from what others where saying.

    Can't remember how much it all ended up costing me, i gave up on keeping total after a while.

    No idea what happened to the car, when i sold it to them they where going to use it as a drift car, now a few parts a popping up so not really sure.


    I currently have the Tickford Computer so i guess ill sell that and buy a new Aftermarket Computer, and okay sweet ill source the Turbo and Intercooler and when you mean fuel system does that consist of the Fuel Pump and anything else? Cheers and okay sweet ill message him asking smile.gif

    scottyg938
    Post #28

    QUOTE (Chris_Rogers_01 @ Feb 8 2012, 03:34 PM) *
    I currently have the Tickford Computer so i guess ill sell that and buy a new Aftermarket Computer, and okay sweet ill source the Turbo and Intercooler and when you mean fuel system does that consist of the Fuel Pump and anything else? Cheers and okay sweet ill message him asking smile.gif


    you will need the pump and injectors, im not sure what else, mine was duel fuel and i never got around to upgrading the petrol system just the gas, that also meant i didn't need to upgrade the ECU so i can't recommend one of those either.

    Yeah you wont be able to tune the ticky computer so you will probs be up for around 2k for a decent aftermarket computer, i think i paid about 2k for the gt35r.

    Honestly in the long run it would turn out cheaper and more reliable to get a BA XR6 turbo engine from a wreck and transplant that into it, which would also get you more power a lot easier

    tanieka22
    Post #29

    mate if your gonna put a v8 in it go get a ford au series 1 or 2 302.. 220kw v8 with plenty of mods still to take place....
    myself i love the six i find theres jus as much power as the 8... 99 au i6 vs 220v8 ba.... he asked me if i had a 5 litre.
    as for mods id be thanging sprk plugs, leads, coil pack, a stge 3 electronic shiftkit, get your self some v8 or blue ba fg injectors for turbo rising rate regulator probably have to do battery relocation for turbo application.... as for aftermarket computers stuff paying 5 6 hundred for aftermarket...... loot at these guys and get a custon tune for your parts. www.tiperformance.com.au email jason and ask him. lots of ford i6 pullin more than 250kw

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Login with Facebook

      Login using your Facebook account!

5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
Loading...
x