Back

 1987 Nissan R31 Pintara  

Upload Entry
SIL91
  • SIL91
  • Budding User
  • Member No.: 188,122
  • Joined: 10-March 10
  • Posts: 642
Post #1 post 7th January 2012 - 06:51 PM
Engine: Freshly rebuilt ca20e (higher compression)

Exhaust: lukey extractors to dstock cat to 2.5inch exhaust with single muffler

Suspension: peders springs in rear monroe shocks and chopped kings in front

Wheels: sr20 wheels

Modifications: mod plated for 2 seater and bucket seats

Stereo Audio / Visual: single diun head unit with usb and 6x9 sony speakers and 6 inch speakers

Estimated Power: not much

[b] current acomplisments: resprayed white with rising sun on bonet repsrayed trims black and everything (soon to clear coat once paint hardeens and cures

[b] future mods: 15x8 and 15x10 +0 steelies black with strected tyres mechanical lsd or decent locker, then a rb30 turbo

i paind 150 for this car in orange then have since then resprayed white put sr20 wheels on it done suspension already had the mod plate done prior to me buying it then got the motor for free from a mate of mine out of his gazelle was freshly rebuilt and he had no need for it all i want to do is put a stringe diff in it as atm it has a stock diff thats welded and put some 15x8 +0 and 15x10 +0 steelies and then eventually put a rb30 turbo motor box and all in it and use it as a daily skid car
1987 Nissan R31 Pintara
1987 Nissan R31 Pintara
1987 Nissan R31 Pintara

TOP

Comments

  • Boost Network 31
  • Ben_Birch
    Post #2

    I give that CA20 engine 1 month before it pisses itself leaking and overheating..
    Worst engines ever. I know from experience.. Chuck an RB25/30 in or something.
    Other than that, have fun skidding!

    MR_JORDZ
    Post #3

    These come stock with 4.11s diff gears dont they?

    SIL91
    Post #4

    Yer it has 4:11 gears and will ebmmbe putting better motor in it

    KammdUP
    Post #5

    Good luck get zero offset 10s to fit the ass with the solid rear and anything above 185 tyres.
    15x8 +-0 should sit real nice

    janth6
    Post #6

    i hope your wearing a flame suit bowrofl.gif

    MR_JORDZ
    Post #7

    QUOTE (KammdUP @ Jan 7 2012, 07:51 PM) *
    Good luck get zero offset 10s to fit the ass with the solid rear and anything above 185 tyres.
    15x8 +-0 should sit real nice
    Maybe he is tubbing the rear? and runing a shorten diff wink.gif

    AddoBmx
    Post #8

    Maybe he just wants hektik jdm poke.

    ot: Bonnet does look kinda cool, gl with it.

    176OES
    Post #9

    Masking off?... whats that?

    NTG78
    Post #10

    I remember my R31 Pinty wagon lol

    88_VLW
    Post #11

    mod plated for over spray and everything? head_wall.gif

    SIL91
    Post #12

    masking was rushrd these photos were taken a couple days ago since then windows and shit are clean theres no overspray now and car is cleaned up
    Car was painted and masked in 4 hrs so was rush so it could be registered

    1%ER
    Post #13

    Dude.. I don't think you even sanded it down... 4hours to paint it...?

    What the fuckkkkkkk... It would have looked better before!!! You have so much overspray its ridiculous.

    And if it "looks better now all cleaned up" where the farrrkk are those photos??
    You fail.

    This is a shittta.

    1%ER
    Post #14

    And I didn't know spray rattle can paint could harden and cure lol

    I could be wrong but I've only ever painted hubs with heat proof 3M stuff..
    Im not from logan, I leave body work to the Proffessionals !!

    SIL91
    Post #15

    Care was sprayed with a compressor and spray gun it was sanded over 1 week period it took 4 hrs to mask and paint hatred will hate u have an isuue get over it

    _Ben
    Post #16

    GAYDM as fuck.

    insertcoolname
    Post #17

    wow, just wow.

    I mean really, where to begin?

    There truely is nothing positive to say about this, it's just straight up abortion.
    SUB81
    Post #18

    best pintara ive ever seen.. this is almost as sic as the purple wide body mazda
    bonnet get respect, burn the rest..

    Timmyp34
    Post #19

    QUOTE (1%ER @ Jan 7 2012, 11:16 PM) *
    And I didn't know spray rattle can paint could harden and cure lol

    I could be wrong but I've only ever painted hubs with heat proof 3M stuff..
    Im not from logan, I leave body work to the Proffessionals !!

    I beat you suck on your mummys tits.

    gutless
    Post #20

    QUOTE (Timmyp34 @ Jan 8 2012, 04:34 AM) *
    I beat and you suck, on your mummys tits.

    Sounds like a party.

    1%ER
    Post #21

    QUOTE (Timmyp34 @ Jan 8 2012, 04:34 AM) *
    I beat you suck on your mummys tits.

    No you didnt faggot. Eat dick

    sdf4lyfe
    Post #22

    QUOTE (Timmyp34 @ Jan 8 2012, 04:34 AM) *
    I beat you suck on your mummys tits.

    fuckin low dude

    tom2tom1
    Post #23

    wow this is getting out of hand went from someone's pride and enjoy to baging him and his family ..... bit low head_wall.gif

    Wraith
    Post #24

    Lol @ japan thing on bonnet and fuel cap. 10 bucks says it's an aus made car.

    drunk_chicken
    Post #25

    farkkkin beast braaaaah.,slyyddd 4 lyffee

    tas_ae71
    Post #26

    QUOTE (insertcoolname @ Jan 8 2012, 01:48 AM) *
    wow, just wow.

    I mean really, where to begin?

    There truely is nothing positive to say about this, it's just straight up abortion.


    QFT!!!

    it took you 4hours to mask it up? id hate to see a rush job then!

    88shatls
    Post #27

    u got that rego looking like that u must no some good people

    sdf4lyfe
    Post #28

    Burntsmoke
    Post #29

    That's JDM as brah! needs longer pipes out the back.

    GRAMPS*
    Post #30

    Wow this is fucking shit house
    <object width="640" height="360"><param name="movie" value="https://www.youtube.com/v/wXw6znXPfy4&hl=en_US&feature=player_embedded&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowScriptAccess" value="always"></param><embed src="https://www.youtube.com/v/wXw6znXPfy4&hl=en_US&feature=player_embedded&version=3" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="640" height="360"></embed></object>

    crpstra
    Post #31

    You took a week to sand it, You could of at the very least done some panel work ! Then 4 hours to mask and paint ? What were you sniffing it as you were painting ?

    Man, Just sell it and move on.....

    SLY_ZED
    Post #32

    I had 16*10 +-0 on the rear of my 31 with 205/50 tyres. Rolled gards with jack handle shit fits mint...

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Forgotten your password?
    • Login with Facebook

      Login using your Facebook account!

16 User(s) are reading this topic (16 Guests and 0 Anonymous Users)
0 Members:
Loading...
x