Login
Upload Entry
-
Lachlan_VLT
-
- Lachlan_VLT
- JOG ON!!!!!!
- Member No.: 33,930
- Joined: 16-October 05
- Posts: 615
-
From: QLD
Post #1
22nd January 2012 - 05:05 PM
22nd January 2012 - 05:05 PM
Current mods list:
Supra water pump conversion
AU falcon thermos, with daives craig thermo cont.
Greddy solid Radiator top pipe
Sard Fuel Reg
Aeromotive stealth 340lph in tank fuel pump
Sard 540cc drop in injectors
Custom Steampipe manifold
50mm PCP external wastegate
Holset HX40 7 blade turbo with 16cm rear housing
Turbo back 3" into HKS M/S Hipower exhaust (twin 2 1/2 inch exhaust exiting in 2 large cannons)
600x300x76 FMIC with custom 3" stainless piping
MV autos 1.5 shift kit
3500rpm histall convertor
Large PWR transmission cooler in place of the factory side mount
3.769 ratio Torsen from a late model Supra
To be fitted and tuned shortly (will update with power figure and a dyno sheet once its done)
Greddy Emanage Ultimate, Greddy 3 bar map sensor, AEM wideband AFR sensor/guage
Hoping for 300rwkw once its tuned with the current mods, anymore will be a bonus....
Tein Height adjustable coilovers
Work VS-SD 18x8 and 18x9 +10 effective front and rear with federal 595's front, and Kuhmo KU36's rear.
Supra 16x9 rims for skid and drag duties, wearing whatever is arround for now. Will be getting some Mickey Thompson ET streets for when I want to lay down some times.
Only other body mod is a small ebay type M3 style boot lip.
Anyway let me know what you think, I can handle the good and the bad coments. Ive built this car how I wanted it from something pretty stock, have done all the work myself with a little help form mates when needed. And I could not be happier with the results, though i do understand it wont be everyones thing.
Anyway on with the pics:
Was pretty annoyed with the amount of bugs on it after the short drive, only had it looking imaculate a couple of hours earlier, damn country roads
This post has been edited by Lachlan_VLT: Jan 22 2012, 05:22 PM
Supra water pump conversion
AU falcon thermos, with daives craig thermo cont.
Greddy solid Radiator top pipe
Sard Fuel Reg
Aeromotive stealth 340lph in tank fuel pump
Sard 540cc drop in injectors
Custom Steampipe manifold
50mm PCP external wastegate
Holset HX40 7 blade turbo with 16cm rear housing
Turbo back 3" into HKS M/S Hipower exhaust (twin 2 1/2 inch exhaust exiting in 2 large cannons)
600x300x76 FMIC with custom 3" stainless piping
MV autos 1.5 shift kit
3500rpm histall convertor
Large PWR transmission cooler in place of the factory side mount
3.769 ratio Torsen from a late model Supra
To be fitted and tuned shortly (will update with power figure and a dyno sheet once its done)
Greddy Emanage Ultimate, Greddy 3 bar map sensor, AEM wideband AFR sensor/guage
Hoping for 300rwkw once its tuned with the current mods, anymore will be a bonus....
Tein Height adjustable coilovers
Work VS-SD 18x8 and 18x9 +10 effective front and rear with federal 595's front, and Kuhmo KU36's rear.
Supra 16x9 rims for skid and drag duties, wearing whatever is arround for now. Will be getting some Mickey Thompson ET streets for when I want to lay down some times.
Only other body mod is a small ebay type M3 style boot lip.
Anyway let me know what you think, I can handle the good and the bad coments. Ive built this car how I wanted it from something pretty stock, have done all the work myself with a little help form mates when needed. And I could not be happier with the results, though i do understand it wont be everyones thing.
Anyway on with the pics:
Was pretty annoyed with the amount of bugs on it after the short drive, only had it looking imaculate a couple of hours earlier, damn country roads
This post has been edited by Lachlan_VLT: Jan 22 2012, 05:22 PM
Report Comments
-
Boost Network 14
-
Gerry GiraffePost #5Very cool, but not a fan of the rims. Great work though mate!
22nd January 2012 - 05:31 PM
Reply
Lachlan_VLTPost #9QUOTE (8URVTEC @ Jan 22 2012, 07:02 PM)
looks stock
needs moar lowa
engine is shweet
Might explain why I never get pulled over, which is a good thing in a car like this..... 22nd January 2012 - 06:12 PM
Reply
LifeBehindBarsPost #13Nice and clean engine bay!! Wheels are not my taste tho. I have not seen too many of these cars, looks good.
24th January 2012 - 09:32 AM
Reply
GREATWHITESHARK#1Post #14very nice, engine is clean and tidy, but please get rid of the rear window stickers, it just looks tacky!
24th January 2012 - 03:56 PM
Reply
-
Member Login
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create Account -
Login using your Facebook account!
-
9 User(s) are reading this topic (9 Guests and 0 Anonymous Users)
0 Members:
Loading...
x