Back

 1993 Nissan Silvia S13 Autech  

Upload Entry
kcirraC
  • kcirraC
  • Standard User
  • Member No.: 73,618
  • Joined: 9-July 07
  • Posts: 312
  • From: Brissy
Post #1 post 24th December 2011 - 06:38 PM
Engine: - S15 Autech sr20de

Exhaust: - Standard fujitsubo 2.5" headers, HKS 2.5" straight through muffler with drift tips - stock cat head_wall.gif

Suspension: - Fully adjustable tanabe super pro series coilovers - wound up all the way.

Wheels: - 17x9 XXR racing wheels

Modifications: - Engine conversion
- 56mm Allow Koyorad Radiator
- HD clutch
- S14 box
- Front strut brace
- Shimmed LSD
- K&N pod
- S14 calipers
- (Standard with the autech) - bigger cam lobes, sodium filled lifters, vct, higher compression and a larger throttle body.

Stereo Audio / Visual: - Type R

Estimated Power: - Quicker than my old pulsar...

Recently bought this as my daily drive, after having a few roadworthy problems at first I've finally got some photos of her. My plans are to get the GTR 2 slat grille and shorten the intake, in time I'll get thicker sway bars, rear strut brace, upgrade the bushes etc. Cheers. thumbsup.gif
1993 Nissan Silvia S13 Autech
1993 Nissan Silvia S13 Autech
1993 Nissan Silvia S13 Autech
1993 Nissan Silvia S13 Autech
1993 Nissan Silvia S13 Autech
1993 Nissan Silvia S13 Autech
1993 Nissan Silvia S13 Autech
1993 Nissan Silvia S13 Autech

TOP

Comments

  • Boost Network 32
  • Jake4x4
    Post #2

    I think I saw you driving through Warner about an hour ago? Or it may have been another similar one.

    Either way, Silvia looks great! Future plans sound good!

    kcirraC
    Post #3

    QUOTE (Jake4x4 @ Dec 24 2011, 06:50 PM) *
    I think I saw you driving through Warner about an hour ago? Or it may have been another similar one.

    Either way, Silvia looks great! Future plans sound good!


    yeah mate that was me. Cheers!

    gutless
    Post #4

    That stock cat is holdin you back bruh.

    will123
    Post #5

    looks seet. i see you all the time..

    sr_silvia
    Post #6

    How much did you pay for this? looks so nice and im jelly of your Autech SR!

    Clinterus
    Post #7

    pretty sure i seen it for sale on here, looks neat.
    recon it could be lower though wink.gif

    BenIsaac
    Post #8

    Aftermarket cat would make 0.00001% difference on an N/A, better spend ur money elsewhere. Nice car smile.gif

    kcirraC
    Post #9

    QUOTE (Clinterus @ Dec 24 2011, 08:58 PM) *
    pretty sure i seen it for sale on here, looks neat.
    recon it could be lower though wink.gif


    I would like it lower except it's already below legal.

    kcirraC
    Post #10

    QUOTE (sr_silvia @ Dec 24 2011, 08:19 PM) *
    How much did you pay for this? looks so nice and im jelly of your Autech SR!


    thanks man! I forked out 8 for it.

    chrisdinnes
    Post #11

    you could pick these up for less then 8 grand turboed
    Gerry Giraffe
    Post #12

    Looks awesome mate, great work!

    gutless
    Post #13

    QUOTE (chrisdinnes @ Dec 24 2011, 09:44 PM) *
    you could pick these up for less then 8 grand turboed

    And wtf is your point?

    Strappin
    Post #14

    Love is the autech sr looks so beast

    8URVTEC
    Post #15

    jelly

    Sharpy
    Post #16

    QUOTE (chrisdinnes @ Dec 24 2011, 09:44 PM) *
    you could pick these up for less then 8 grand turboed



    Enjoy your bucket of shit turbo'd S13 then.

    2FAS74U
    Post #17

    if you could point me in the direction of a clean and tidy autech sr20det silvia for less than 8 would be much appreciated smile.gif cool car btw looks good

    mark1414
    Post #18

    QUOTE (gutless @ Dec 24 2011, 09:54 PM) *
    And wtf is your point?


    Maybe that P platers are idiots. bowrofl.gif

    QUOTE (Sharpy @ Dec 24 2011, 10:54 PM) *
    Enjoy your bucket of shit turbo'd S13 then.


    Same could be said for this. Doesn't look very straight and I have no doubt its had a hard life also. Dont get me wrong it would be a cool car as a P plater but they are hugely overpriced, guess if OP sells it on to another P plater when he is done he can recoup his loses.

    cameron92
    Post #19

    holy shit ithink this was my mates old car. how long have you had it?

    Ballin
    Post #20

    Nice, simple slider. Top job for not being a try hard like a lot of other P platers smile.gif

    morrisss
    Post #21

    this is by far the gayest s13 ive ever seen

    ekvic
    Post #22

    Looks good mate smile.gif keep it clean. Ignore the fucking retards that think this is a waste of money, if you enjoy it as I'm sure you do then it was worth every cent.

    EDIT - If this was mine I'd buy some smaller diameter but wider + lower offset wheels for a bit of poke, might be an idea. smile.gif

    Datsun_dan64
    Post #23

    looks good, if i was on p's would own thumbsup.gif
    suzuka
    Post #24

    pretty gay BUT with the autech i suppose it has potential.

    Bug Boy
    Post #25

    QUOTE (Hadamona @ Dec 24 2011, 10:36 PM) *
    Yay it's another silvia, again... anyone else getting bored of silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias silvias


    lol

    kcirraC
    Post #26

    QUOTE (ekvic @ Dec 25 2011, 01:02 PM) *
    Looks good mate smile.gif keep it clean. Ignore the fucking retards that think this is a waste of money, if you enjoy it as I'm sure you do then it was worth every cent.

    EDIT - If this was mine I'd buy some smaller diameter but wider + lower offset wheels for a bit of poke, might be an idea. smile.gif


    Thanks mate! yeah I would like to but they came with the car so i'm not whinging.

    kcirraC
    Post #27

    QUOTE (Ballin @ Dec 25 2011, 12:51 AM) *
    Nice, simple slider. Top job for not being a try hard like a lot of other P platers smile.gif


    thanks mate!

    Slysilvia
    Post #28

    This is josh's old sil. Gotta say its the quickest s13 i've been in and by far loves bashing limiter and going through tie rod ends.

    BukkaneNinja
    Post #29

    QUOTE (Slysilvia @ Dec 28 2011, 02:50 AM) *
    This is josh's old sil. Gotta say its the quickest s13 i've been in and by far loves bashing limiter and going through tie rod ends.


    Quickest silvia you've been in? Was it the only one?

    Josh's sil is pretty darn quick for an NA though i will admit. Looks nice, keep it clean and look after the engine, he used to drive it hard haha.

    Slysilvia
    Post #30

    QUOTE (BukkaneNinja @ Dec 28 2011, 04:33 PM) *
    Quickest silvia you've been in? Was it the only one?

    Josh's sil is pretty darn quick for an NA though i will admit. Looks nice, keep it clean and look after the engine, he used to drive it hard haha.


    sorry, quickest 'NA.
    kcirraC
    Post #31

    QUOTE (Slysilvia @ Dec 28 2011, 02:50 AM) *
    This is josh's old sil. Gotta say its the quickest s13 i've been in and by far loves bashing limiter and going through tie rod ends.


    yeah I just did the tie rod ends. Rocker stoppers...

    Spinning
    Post #32

    Hey man, love your sil. I always see you driving in Cashmere and Warner! Im the guy that was in the two tone sil on Liley Road a couple of days ago..

    kcirraC
    Post #33

    QUOTE (Spinning @ Dec 29 2011, 09:49 PM) *
    Hey man, love your sil. I always see you driving in Cashmere and Warner! Im the guy that was in the two tone sil on Liley Road a couple of days ago..


    thanks man, Yeah I remember. yours is nice aswell

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Forgotten your password?
    • Login with Facebook

      Login using your Facebook account!

2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
Loading...
x