Paul73RX
Post #15
A word of advice. Don't even bother with a VF34 Trust me! Take advice from someone who's been there and done it. I was over my VF34 after 1 week. Save up about $4,000 and get a TD05H-20G turbo, dump pipe, full exhaust, front mount intercooler, cold air intake, Walbro 500hp fuel pump, custom tune and 18psi. You'll be producing about 300awhp and you will be on the safe limit for your EJ255. This is the setup I run in my 07 WRX. You'll never look back and it will be a fun car to drive bro |
---|
stockmy00
Post #20
Vf34 are fantastic on the 2 litre, not sure about the 2.5.. I would imagine similar though. My mates gc8 with vf34, process west tmic, fuel pump and exhaust is putting down 195kw atw.. And it hits full boost at about 3000rpm.. Surely on a 2.5 it would be 2500rpm and prob 200-210kw. |
---|
Paul73RX
Post #21
With the TD05H-20G and FMIC I get full boost at around 3,300rpm. I'm running 18psi and making just over 300hp and almost 600nm's of torque.. Considering our engines are 9.0:1 compression you won't hate the lag. Don't bother with a TMIC. By the time you get a big size intercooler, heatproof it from the turbo and dump pipe so you don't get heat soak, custom build a wind deflector for the intercooler etc you will be better off with a FMIC. Also, the top end is majorly improved.. The 2.5L will max out the VF34, waste of time imo.. |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!