Back

 1989 Nissan 300ZX 2+2 Tt  

Upload Entry
Roary
  • Roary
  • New User
  • Member No.: 45,793
  • Joined: 26-April 06
  • Posts: 29
  • From: Brisbane
Post #1 post 26th August 2011 - 07:41 PM
1989 Nissan 300zx Z32 Twinturbo Manual

Power: 350KW ATW at 21psi

Suspension, braking, wheels and tyres
Tein HA coilover's rebuilt
whiteline sway bars and new links
Every bush in car changed to Nolathan ones
Adjustaball Everthing front and back
Rebuilt R34GT-T front Callipers painted red
Rebuilt Z32 rear callipers painted red
DBA 4000 Drilled front 310mm v rotors
DBA 4000 Drilled Rear 297mm v rotors
Custom made Enzed Breaided brake lines
TWR pads allround
17-9 +30 and 17-10 +38 Autostrada MODENA's getting refubed
245/40 and 285/40 KU36 Semi slick tires

Interior
Custom retrimmed seats in cow leather
all panels retrimmed in Black cow leather
20% dark tint all round
gauge cluster rings and 300kmh dash
Triple gauge piller holder
Air/Fuel ratio/oil pressure/oil temp
HDI-E boost controller with HDI gauge
Custom Boot install with 12" sub and JVC amp
5x7 rear JL audio 2way speaker
Type X alpine splits front
Pioneer head deck MP3/iPOD

Exterior body work
Bomex Front bar with sprrd holes
Stillen side skirts
Stillen Rear add on Defuser
Abflung sweep back wing (not F40)
new rubbers and mouldings allround
new window cowls with clips
Paint when done will be Midnite Blue peal

Gearbox
cleaned and painted gearbox with new seals and dust boot
Braided Clutch Line
Bronze shifter bushes
New nissan gearbox mount
STD 6puck XHD clutch rated at 600hp from the USA
Redline shockproof gear oil, Diff and gearbox

ENGINE
Full Timing Belt kit, Belt, Pulleys, Tentioner, cam seals
Ported stock manies
Big hybrid Turbos with .86 rear housings
HKS waste gate acturators
Jecs 550cc Injectors
Japtec massive side mount Intercoolers
2x z32 AFMs running a Selin dual MAF controller
all rubber hoses changed to Silicon
New gaskets and Seals thoughout
all plugs replaced on wiring Harness with new one
A/C deleted
ASI 56mm alloy Radiator
Huge front mount oil cooler
AMS 3" split Dumps into Duel 3" stainless steel exhaust
UAS center Muffler+no Cats
UAS rear mufflers with duel 3" Tips
RARE Mine's ECU with wild Turn for 550cc Injectors

All work Done By my self, not anyone ELES!
Blood, Sweat and Tears

Now some Pictures










Enjoy and thanks for looking

This post has been edited by Roary: Aug 27 2011, 01:02 AM
1989 Nissan 300zx 2+2 Tt


--------------------
KEEP IT UP
TOP

Comments

  • Boost Network 31
  • getwheel
    Post #2

    Nice work bro.. nice work

    Roary
    Post #3

    It,s nealy done, Just need paint

    turbo183
    Post #4

    i dont like the look of these things but i like what you have done!

    Roary
    Post #5

    QUOTE (turbo183 @ Aug 27 2011, 02:18 PM) *
    i dont like the look of these things but i like what you have done!


    Me to mate, No Failside bodykits here!

    cameron92
    Post #6

    looks too much like an f40 with the wheels and wing, change it up a bit?

    Roary
    Post #7

    QUOTE (cameron92 @ Aug 27 2011, 02:36 PM) *
    looks too much like an f40 with the wheels and wing, change it up a bit?


    Good thing about these wheels is no one likes them but me.

    turbo183
    Post #8

    nice ping pong table but you gotta move that shiiitt!

    slokey
    Post #9

    I like the wheels, are they borbets?

    You see the thing is most people don't like the wheels but that's only because most people don't have any taste or clue

    NOL499
    Post #10

    Very nice! What color she gonna be?

    matt_e_b81
    Post #11

    QUOTE (turbo183 @ Aug 27 2011, 02:10 PM) *
    nice ping pong table but you gotta move that shiiitt!

    yeah move the shit and give us some more pics of that table LOL

    Roary
    Post #12

    QUOTE (matt_e_b81 @ Aug 27 2011, 03:21 PM) *
    yeah move the shit and give us some more pics of that table LOL

    drool.gif mamoru.gif

    j.d.m
    Post #13

    this looks EXACTLY like my old 300. did this used to be red in colour, and n/a ??

    pic of mine :
    LuKeY
    Post #14

    Looks good man, can't wait to see it painted!

    88shatls
    Post #15

    looks good mate

    wheelzie1989
    Post #16

    QUOTE (j.d.m @ Aug 27 2011, 03:18 PM) *
    this looks EXACTLY like my old 300. did this used to be red in colour, and n/a ??

    pic of mine :





    Looks like it used to be a charcoal/dark grey.

    NTG78
    Post #17

    the bay looks mint thumbsup.gif over all a nice 300 ... pics after paint?

    Roary
    Post #18

    QUOTE (wheelzie1989 @ Aug 27 2011, 03:23 PM) *
    Looks like it used to be a charcoal/dark grey.


    This was Factory Twinturbo mate and My Modena's have all there caps and split pins, Those also are a slightly different design than the one's I have also.
    That wing is HUGE to like twice as high, Mine (Abfung) sweeps back alot compared to most F40 lookalike wings. my 300zx used to look like this.

    And my Wing

    Lower and swept back

    rabs_33_gtst
    Post #19

    Nice...that engine bay looks mint wink.gif....aswell as the rest of the car. love to see it when its all painted up

    Roary
    Post #20

    ENGINE PICS
    what it looked like when I pulled it out

    And all ready to go back in.
    180sxy
    Post #21

    Good on you, these cars arent as bad as everyone lets on. The only real hassle I see is working on the motor.

    One day I'll have a stripped out one for track purposes...

    Roary
    Post #22

    QUOTE (180sxy @ Aug 27 2011, 05:15 PM) *
    Good on you, these cars arent as bad as everyone lets on. The only real hassle I see is working on the motor.

    One day I'll have a stripped out one for track purposes...


    Thanks mate, you should see what they do to them in the states!

    krayziebenno
    Post #23

    sweet 300. engine bay looks great.

    unclepaulie
    Post #24

    i like the wing from the before picture.

    but beside the wing issue, i like it. well done. its sad you dont see many of these,


    +1 for having a stripped out track warrior one day

    180sxy
    Post #25

    QUOTE (Roary @ Aug 27 2011, 05:57 PM) *
    Thanks mate, you should see what they do to them in the states!


    I have!

    autech_s15
    Post #26

    Looks good bro, just get that shit painted! Primer looks grot

    8URVTEC
    Post #27

    Nice work
    epic

    astorey
    Post #28

    Fuck yeah my dream wheels, just need to get them widened.

    Roary
    Post #29

    QUOTE (astorey @ Aug 28 2011, 12:28 PM) *
    Fuck yeah my dream wheels, just need to get them widened.

    With these wheels you can, they are a 3 piece rim but I think 9J and 10J is wide enough
    benji_xrt
    Post #30

    Top work, the engines in those things look fricken huge!!!

    ordinary guy
    Post #31

    the engines in these things ARE huge.... in relation to the bay they crammed it into..... it was the only real issue with these things was the bay.... and the heat in the bay.....

    i'm not a massive fan of the interior but it looks good though man..... love the modenas... it would appear you've pumped some serious coin into it. i may not have seen but did you say what colour you were going? i vote black.... will go with the yellow interior nicely. whatever you do..... don't put those NASTY ASS ferrari lights in the back of it..... they are rank.

    Roary
    Post #32

    QUOTE (ordinary guy @ Aug 29 2011, 07:05 PM) *
    the engines in these things ARE huge.... in relation to the bay they crammed it into..... it was the only real issue with these things was the bay.... and the heat in the bay.....

    i'm not a massive fan of the interior but it looks good though man..... love the modenas... it would appear you've pumped some serious coin into it. i may not have seen but did you say what colour you were going? i vote black.... will go with the yellow interior nicely. whatever you do..... don't put those NASTY ASS ferrari lights in the back of it..... they are rank.


    Stock tail's for me, I don't like after market rear lights on these and it will be a mix of midnight blu and purple for the color.

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Forgotten your password?
    • Login with Facebook

      Login using your Facebook account!

14 User(s) are reading this topic (14 Guests and 0 Anonymous Users)
0 Members:
Loading...
x