Login
 |
GTRVspec95
Post #1436
QUOTE (Anchor @ Jul 22 2011, 10:24 AM)  Sold the 434.. What new engine are you going to source ... LS9 
|
|---|
21st July 2011 - 04:45 PM
 |
clutch-monkey
Post #1438
QUOTE (Anchor @ Jul 22 2011, 10:24 AM) Sold the 434.. : QUOTE (Monaro454 @ Jul 22 2011, 10:53 AM) anybody interested in a 502 chev motor? alloy heads fully rebuilt (not even fired yet) these sell off the crate for 14-16G complete carb to sump, can get it for 8g go on, Anchor.. |
|---|
|
Monaro454
Post #1439
QUOTE (Monaro454 @ Jul 22 2011, 10:53 AM) anybody interested in a 502 chev motor? alloy heads fully rebuilt (not even fired yet) these sell off the crate for 14-16G complete carb to sump, can get it for 8g sorry, that reads wrong. the heads are alloys, the entire motor has been rebuilt and hasn't been started since then. these motors are 502 cubes and 502hp from standard... dunno what has been done to this in the rebuild but I can find out if anybody is interested. 8G is a bargain for this donk. |
|---|
 |
-Jordan-
Post #1442
QUOTE (wbtonner @ Jul 21 2011, 09:51 PM) Nice! I was gonna go "Fucking lol at the turning circle" when I remembered that they were in America and drive on the wrong side of the road, lol, my bad. haha, don't worry - I did the same thing at the start. So cool though. Trying to figure out if I should buy a new car to tow the camaro with or spend the money on a procharger. QUOTE (Anchor @ Jul 22 2011, 10:24 AM) Sold the 434..  edit: just because I think it's that damn cool - drove it to the track towing a trailer and then did a 7.60 pass. |
|---|
|
|
-Jordan-
Post #1443
Oh... thinking of selling the Camaro for this too... |
|---|
 |
wbtonner
Post #1444
Check this out Jordan, one for the Nova lovers! QUOTE (Anchor @ Jul 22 2011, 02:52 PM) Nah, if i wanted something like that i would have kept the 434. Gotta stay realistic Jamie, i would love a LS9... But something like a L98 with a huffer might have to do. Iunno I've started looking again for a motor for the ute and thats what i'm starting to lean towards. (l98) But they are still fairly exxy being quite a new engine that i'll most likely rip apart anyway  Though the only reason i'd choose one over a LS 1/2 would be becuase of the stock heads on the L98, otherwise a LS 1/2 will be the go with aftermarket heads. Then stroke it + hang a GT-47r off the side. Are you still going to run a t56 if you end up going down the late model V8 + turbo route? IT would be fun and all while it lasts, just that most guys that build big number V8s run Autos because the manuals aren't up to the task.
|
|---|
 |
|---|
 |
jebby88
Post #1446
QUOTE (Anchor @ Jul 22 2011, 10:47 PM) I'm not looking for big numbers so to speak. Only around 550rwhp or something like that. The T56 will be fine behind that. I'm trying to weigh up whether to get an LS1 and add heads or just go the L98... Iunno... Got a bit of time to sort that shit out anyways. this may help you decide http://forums.justcommodores.com.au/genera...ls2-vs-l98.html |
|---|
|
|
GTRVspec95
Post #1448
QUOTE (Monaro454 @ Jul 22 2011, 10:53 AM) anybody interested in a 502 chev motor? alloy heads fully rebuilt (not even fired yet) these sell off the crate for 14-16G complete carb to sump, can get it for 8g QUOTE (Anchor @ Jul 22 2011, 10:47 PM) I'm not looking for big numbers so to speak. Only around 550rwhp or something like that. The T56 will be fine behind that. I'm trying to weigh up whether to get an LS1 and add heads or just go the L98... Iunno... Got a bit of time to sort that shit out anyways. QUOTE (HSV @ Jul 23 2011, 09:18 AM) I would personally go Ash's engine route, bolt straight in, no wiring issues, easy power/torque on tap without changing much and that engine is dirt cheap and rebuilt to boot. Plus you've got bragging rights to a 500 cube big block lol For the price of Ash's BBC it's hard to argue. Though is your suspension/frames set up to handle a BBC in the front ? |
|---|
|
|
Anchor
Post #1449
If i was going to do that, i would have kept the 434. I want fuel economy (sorta), easy power. Easy start in the morning, etc etc. Jump in and drive to brisbane ya know. It'll have new brakes, new suspension, new everything apart from motor. So yeah, thats next. |
|---|
|
|
wbtonner
Post #1450
QUOTE (Anchor @ Jul 22 2011, 10:47 PM) I'm not looking for big numbers so to speak. Only around 550rwhp or something like that. The T56 will be fine behind that. I'm trying to weigh up whether to get an LS1 and add heads or just go the L98... Iunno... Got a bit of time to sort that shit out anyways. Same here, plus i've got to decide which route i'm going to take. |
|---|
|
|
wbtonner
Post #1451
Anyone good with a welder..... |
|---|
|
|
no more holdens
Post #1453
QUOTE (wbtonner @ Jul 24 2011, 07:20 PM) Thats alright Fuk its 40 years old aint it Ive seen ALOT worse repaired Should get a few K , surely |
|---|
|
|
clutch-monkey
Post #1455
currently post surgery so tackled something lighter. |
|---|
|
|
GTRVspec95
Post #1457
QUOTE (clutch-monkey @ Jul 28 2011, 12:25 PM)  ah much better. I've seen space saver wheels that are wider then that 
|
|---|
|
|
|---|
|
|
GTRVspec95
Post #1462
QUOTE (74QEE @ Jul 28 2011, 03:26 PM)  white one is a 70 mitsubishi debonair and where do you think the gloria was styled from? 66 ponti parisianne I've know about the Gloria name for ages but never actually went back to look at the early models, and they where probably looking at a Cadillac Eldorado back in the day red.jpg)
|
|---|
|
|
clutch-monkey
Post #1463
QUOTE (GTRVspec95 @ Jul 28 2011, 03:04 PM) I've seen space saver wheels that are wider then that 165's baby  and that's the big tire. 145's are normal 
|
|---|
|
|
no more holdens
Post #1464
QUOTE (74QEE @ Jul 28 2011, 01:08 PM) Is a 250 pre crossflow ford motor also known as a 2v 250? The 250 2V are a rare beast of a motor 2V means 2 venturi carb (yay a fukn 2 barrel carb) Most of the early 250s and the later had a single barrel carb The XE 250 2 barrell carb engines are better |
|---|
 |
74QEE
Post #1465
okay maybe someone could help me out, |
|---|
|
|
no more holdens
Post #1468
QUOTE (74QEE @ Jul 29 2011, 04:33 PM) okay maybe someone could help me out, im about to buy an unregistered car, and its only a a 20 min drive from my house but due to needing my licence for work im not keen to risk and drive it even a few kms, so how do i go about obtaining day rego? do i just apply and pay a fee to qld transport or does the car need to be visually inspected by someone from qld transport? ive bought unregd cars before just have always had them towed or previously not given a shit and just driven them.but id like to do it right this time 20 mins from your house ??? Any local towies around ??? Buy the time ya drive to main roads,deal with the deadbeats, fill out the bs forms, pay your money Its just as easy to get a towie And no ,main roads dont sight the car,but it must be in a road worthy state But the day permit covers insurance incase you hit some one |
|---|
-
Member Login
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create Account -
Login using your Facebook account!