Back

 "Shootin' The Breeze" - Old Skool Chat Thread  

Page 23 of 107
Jump to page
Post Topic
Anchor
Post #771

590 at the treads on 14psi.. But only done 300 miles.

Looking at a 67 Nova today in town, 432 small block, very very very tidy car. I'll try get some pics :oopsie:

Anchor
Post #772

The one in the states has a fuel cell and rear suspension all cut up, and with the dash the way it is i might run into issues trying to import it.. Dunno.

-Jordan-
Post #773

My camaro came over with a fuel cell in it, didn't have any issues importing and the compliance dude had a look over it and said I shouldn't have any issues (when I finally get around to it).

Unsure about the other two though.

Anchor
Post #774

Apparently as long as it looks stockish from the side you'll be fine. But thats just customs, when you come to L02 it might be a different story. Any cut up chassis is a big no no..

This one in town is sounding better anyway.. Has a rack in the front, new interior, all the guages, moser axles, big rear end, pro touring style. And its a 67 :oopsie:

HSV
Post #775

Big difference between compliance and rwc too.

Anchor
Post #776

Yeh, can't exactly get a dodgy L02 as easy as you can a phoneworthy...

-Jordan-
Post #777

Yeah, this is definitely the L02 compliance guy, not for a rwc. But that was only for the fuel cell which is set up properly and externally, wasnt in reference to chassis / dash being cut up. Nice guy who is giving me a very reasonable price.

wbtonner
Post #778

QUOTE (-Jordan- @ Feb 7 2011, 11:14 PM) *
wb - How much longer have you got left mate?

So if anyone knows of someone (most likely a P-Plater or someone after cheap rego) after a worked 250 crossflow XB sedan, let me know. Details of it are here: https://www.boostcruising.com/forums/index....howtopic=603621

Engine was rebuilt a few months ago, gearbox has to be warmed up til it decides to go into 3rd (once it does, it's fine from there on), couple of little rust spots under the paint etc etc.
Might look at fixing the gearbox sometime.

Was originally planning on keeping it as a daily, however, after thinking about it properly for a while, I'd probably be better off with something else that can also double as a tow car.

Not advertising it anywhere at the moment as I'm not in a rush, just if you know of anyone. Still deciding, might end up keeping it and changing it around.


Just a smidge over a year left on my P's. Will ask a workmate of mine who is in the market for an oldschooler when I see him in march.


QUOTE (HSV @ Feb 8 2011, 06:37 AM) *
Good luck getting it regoed ;)

Mines a 468 with a dickload of work done to it atm.

Not a massive fan of the tonners and to be honest I want something that I can take the whole family in, might even look at a cruise car, a custom of some description, and build another Q on the side.



Rego is the easy bit ^_^ Not being raped by the police is the hard part :P

GTRVspec95
Post #779

So I rummaged through the docs the vendor gave me with the Torana and I actually foun some literature for the engine ... From 1990 lol. Seems it was a long block stage 1 sports engine from Betta bolt in NSW supposedly has stage III head XU1 cam and alloy gear . Anyone know anything about this mob ?

HSV
Post #780

Because Asia is half a job, here's the original brochure:
Anchor
Post #781

Just bought meself a '67 Nova :hsdance:

GTRVspec95
Post #782

QUOTE (Anchor @ Feb 9 2011, 03:48 PM) *
Just bought meself a '67 Nova :lol:


Pics or it didn't happen !!! :hsdance:

Anchor
Post #783

Tomorrow :dunno:

I got ones of it in a shed and a shitty vid of it driving, but i'll take some good ones tomorrow.

-Jordan-
Post #784

QUOTE (Anchor @ Feb 9 2011, 03:48 PM) *
Just bought meself a '67 Nova :dunno:


:bowdown:

What kind of engine etc? Much work done or relatively stock?

(I know you have no idea who I am, but I'm still interested in it!)

Anchor
Post #785

434 sbc, roller top end, vac pump, alloy rad, rack and pinion conversion, front coilovers, 17" deep dish rims, elec water pump, hi rise mani, 10 bolt lsd, moser axles, big discs on the front, stereo, etc etc etc. Basically a pro touring car. Built to drive.

I got a few pics but they are shit. So i'll get some more tomorrow when i pick it up.

Anchor
Post #786

Here's the shit photos.
wbtonner
Post #787

HOLY PORN!!!!!!!
LOVE IT!!!!!

-Jordan-
Post #788

That looks unreal man, loving the colour too! Pulls it off really well.

Looks like a great buy! :dunno:

HSV
Post #789

Tidy ride man, should be a nice ball tearer.

Good price too.

GTRVspec95
Post #790

QUOTE (Anchor @ Feb 9 2011, 08:05 PM) *
Here's the shit photos.

[snip]
GTRVspec95
Post #791

QUOTE (EAT26 @ Feb 7 2011, 11:27 PM) *
lol I just upgraded mine to -5s and all up with install and tune was 8g.

GT2860r-5
Tomei Dumps
Nismo 600cc
Nismo fuel pump
HKS hard piping kit
Cooling pro front mount
100cell Cat


As per last nights conversation James, you can see why I'm happy to be playing with an old school car now :P

warney
Post #792

QUOTE (GTRVspec95 @ Feb 10 2011, 03:08 PM) *
As per last nights conversation James, you can see why I'm happy to be playing with an old school car now :)



And not to mentioned where it went to get the work Jamie !!!!

magna_TE
Post #793

Kinda a random question, but where can i dispose of two engines?
I cant imagine the dump allowing me to dump them there?
Just cleaned out the shed and the garage and need to get rid of them haha

NOS440
Post #794

scrap yard or the scrap pile at the dump

magna_TE
Post #795

QUOTE (NOS440 @ Feb 13 2011, 06:26 PM) *
scrap yard or the scrap pile at the dump


Oh sweet, i didn't think theyd allow me to dump them there, but i guess as long as all the oils out its no different to any other metal object.
Cheers

-Jordan-
Post #796

So where are these 'non shit' pics? I wanna see it properly :squint:

Taken it on a drive yet?

Also, is the rack and pinion conversion by "steeroids" by any chance? Ordering a set, keen to know what they're like.

Anchor
Post #797

Haha, its been raining up here since i got it :)

Gotta get some time off work so i can throw it on a hoist and have a look.

The rack and pinion is fuckin hard to steer, need to have a look, something might not be right...


Have driven it a little, its awesome having power straight away. Squeeze the throttle at about 80 and it starts to smoke em good. Found a few more goodies, twin holley red pumps and a 12 bolt diff with moser axles.

Fitting a mechanical water pump this week and welding up the crack in the sump. I'll 'try' get some photos soon :drool:


The best part so far would be people telling me its missing on a cylinder, first of all i shat myself and got out the heat gun to check each pipe... But of course it wasn't.. Just doesn't get over the cam till around 3500rpm

-Jordan-
Post #798

QUOTE (Anchor @ Feb 15 2011, 01:16 PM) *
The best part so far would be people telling me its missing on a cylinder, first of all i shat myself and got out the heat gun to check each pipe... But of course it wasn't.. Just doesn't get over the cam till around 3500rpm


In that case, I'm requesting a video too! :drool:

wbtonner
Post #799

QUOTE (Anchor @ Feb 15 2011, 01:16 PM) *
The best part so far would be people telling me its missing on a cylinder, first of all i shat myself and got out the heat gun to check each pipe... But of course it wasn't.. Just doesn't get over the cam till around 3500rpm

Haha, about the same size as the cam I have in my 6 :) Doesn't make power till 3500/750 but will make it to 8500+ according to the manufacturer. I just don't have the balls to rev it like that with only a balanced stock bottom end. :noes:

Be prepared for mega bullshit fuel bill.

Anchor
Post #800

Oh it's terrible. Drove about 30km the other night, went through 1/4 of a tank of 98 with booster. Might go get a cold start vid now for ya'll.. Just a teaser :)

Anchor
Post #801



There, happy fags :)


Lol @ the fuel pump at the start. Tried to get the temp guage, but yeah, didn't turn the lights on did i.....

wbtonner
Post #802

FFAAAAARRRKKK ME! :)
Very nice!
What motor is it again, cbf searching.

-Jordan-
Post #803

QUOTE (wbtonner @ Feb 15 2011, 09:14 PM) *
FFAAAAARRRKKK ME! :D
Very nice!
What motor is it again, cbf searching.


It's in the title :) 434 sbc

But because I'm bored:

QUOTE (Anchor @ Feb 9 2011, 07:45 PM) *
434 sbc, roller top end, vac pump, alloy rad, rack and pinion conversion, front coilovers, 17" deep dish rims, elec water pump, hi rise mani, 10 bolt lsd, moser axles, big discs on the front, stereo, etc etc etc. Basically a pro touring car. Built to drive.


Sounding very nice though!

Now I'm off to find a video camera that doesn't disort when I turn my car on... haha

Anchor
Post #804

Lol, good ole iphone does the trick..

Anchor
Post #805

And to edit the above, 99% sure its a solid top end.. Sounds very mechanical and gets louder as it revs up, not quieter.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 23 of 107
Jump to page
25 User(s) are reading this topic (25 Guests and 0 Anonymous Users)
0 Members:
Loading...
x