Login-
Talbo92
-
- Talbo92
- Standard User
- Member No.: 171,699
- Joined: 16-June 09
- Posts: 52
5th February 2011 - 03:55 PM
Exhaust: going 2 inch
Suspension: hopefully going coilovers
Wheels: still looking
Modifications: engine conversion, respray gunmetal grey, bucketseats
Stereo Audio / Visual: still looking
Estimated Power: estimated 120kw
This post has been edited by Talbo92: Feb 5 2011, 03:59 PM
Report Comments
-
Boost Network 5
-
the_van_canPost #6
hay mate, looks like a good project. just a word of info, i've done this with a ke70 pano, if your aiming for 120kw you will need to plan everything out well. a bigport 4age usually has roughly 94 kw at the engine before it gets to the ground so on the ground you could be looking anywhere at 65-70kw (stock computer). you will need quiet a bit of modification to that bigport you have there to get it anywhere near that figure. I noticed it has aftermarket cam wheels for timing which is good. My car is a smallport and it got dyno'd at 90kw at the wheels with dead stock smallport (pretty old too) and an ems stinger computer. so just an idea of the work involved . Good luck dude.
5th February 2011 - 06:00 PM
Reply
-
Member Login
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create Account -
Login using your Facebook account!
-
