"Shootin' The Breeze" - Old Skool Chat Thread  

Page 17 of 107
Jump to page
-Jordan-
Post #561

cheers for the info guys! phil - that was a great help, thanks mate.

the car has been set up properly for it - gas cam etc

will definitely pass this info onto him, its a really tidy looking hq tonner, with any luck he'll snap it up!

making me wonder why I bought a yank car really, just payed $1200 in postage alone for parts :headwall: fffuuuuuuu fedex!

DeadSled
Post #562

So for those who haven't read my other thread, i'm taking my car off the road hopefully for no more than 3 or 4 weeks over xmas.

I'm taking the engine out, getting a sweet cam and cylinder head from Nathan (wbtonner) in exchange for rust repairs when he requires it and he will be helping install those, regasketing my whole engine, doing the rear main seal, new welsh plugs, possibly water pump, new alternator, ring gear / flywheel if its required or simply fix my starter, and a new torque converter.

I'm also going to detail the engine bay, get all new rubbers and bushes for all of the front end parts.

Also, repairing all the rust, painting the car in a darker blue (just a closed door respray, since the inside of the doors and door jambs and boot lid look darker than the outside do) and seriously contemplating a white roof with a white visor. Car will also be getting slammed one way or another (thinking of possibly using some xmas money or money from selling FB EK parts to buy HQ steelies, whitewalls and springs off Ash - GTS454, if he hassn't sold them by then).

HSV
Post #563

QUOTE (DeadSled @ Dec 13 2010, 12:46 AM) *
So for those who haven't read my other thread, i'm taking my car off the road hopefully for no more than 3 or 4 weeks over xmas.

I'm taking the engine out, getting a sweet cam and cylinder head from Nathan (wbtonner) in exchange for rust repairs when he requires it and he will be helping install those, regasketing my whole engine, doing the rear main seal, new welsh plugs, possibly water pump, new alternator, ring gear / flywheel if its required or simply fix my starter, and a new torque converter.

I'm also going to detail the engine bay, get all new rubbers and bushes for all of the front end parts.

Also, repairing all the rust, painting the car in a darker blue (just a closed door respray, since the inside of the doors and door jambs and boot lid look darker than the outside do) and seriously contemplating a white roof with a white visor. Car will also be getting slammed one way or another (thinking of possibly using some xmas money or money from selling FB EK parts to buy HQ steelies, whitewalls and springs off Ash - GTS454, if he hassn't sold them by then).


If you are looking for some coin, I need some minor rust repairs on the Monaro done and the single headlight front painted etc.

wbtonner
Post #564

Nick, can you spray?
I thought you mentioned that you got your car sprayed for you?

Also, its only a stage one cam lol so its not that sweet..... With a different stage one cam and that same head I made 99 rwhp through a manual :unsure:

GTS454
Post #565

lol... 99hp, should pull yer head back when you stamp on it :D

wbtonner
Post #566

That was running rich with a tune by yours truely (just twiddling screws at 17 :oopsie:)
It did pull my head back.... after the seat belt pulled it back after it thought I was braking....Going down Queens rd in Kingston if pulled back to second it would go alright :D


Watched a vid of yours the other day, just chirps it up the street SO EASILY :ph34r: With what, 20% throttle :oopsie:

DeadSled
Post #567

QUOTE (HSV @ Dec 13 2010, 11:49 AM) *
If you are looking for some coin, I need some minor rust repairs on the Monaro done and the single headlight front painted etc.

Sounds good to me Ben. My Dad painted our old HR and it came up alright i think.

QUOTE (wbtonner @ Dec 13 2010, 04:05 PM) *
Nick, can you spray?
I thought you mentioned that you got your car sprayed for you?

Also, its only a stage one cam lol so its not that sweet..... With a different stage one cam and that same head I made 99 rwhp through a manual :D

I've never sprayed a car but as above, my Dad has done one and it came up alright. I've got a mate whos a painter who said he'd be keen to paint but i'll be doing all the sanding and prep work.

Lol as for the cam / head.. i'm sure its better than what i'm running haha. I swear i have all of 50hp at the moment.

wbtonner
Post #568

Well if you need a hand painting/ prep, I used to be a painter so I can spray. Real paint, unlike this clear over base stuff :D. Polyurethane @ 40% thinners in a shed at 40 degrees. Not easy when its the side of a hull!

GTS454
Post #569

QUOTE (wbtonner @ Dec 13 2010, 06:24 PM) *
That was running rich with a tune by yours truely (just twiddling screws at 17 :oopsie:)
It did pull my head back.... after the seat belt pulled it back after it thought I was braking....Going down Queens rd in Kingston if pulled back to second it would go alright :D


Watched a vid of yours the other day, just chirps it up the street SO EASILY :ph34r: With what, 20% throttle :oopsie:



that wasn't chirp... that was full loss of traction!! and the motor had been running for about 15 minutes at that stage. mate was driving it.

runs MUCH better than that nowadays :oopsie: and yeah... wasn't full throttle either.

GTS454
Post #570

anybody going to this?

http://www.powercruise.com/downloads/logos/pp7.jpg

might take the Monaro for a cruise.

-Jordan-
Post #571

Damn I wish I could, but I doubt I'll have enough done in time (can't get holidays like I was hoping). Guess I'll just have to wait.

Link to this vid? :D

racerphill
Post #572

Not sure yet, but there is a small chance I may possibly be working at this event...fingers crossed!

GTS454
Post #573

QUOTE (racerphill @ Dec 13 2010, 08:45 PM) *
Not sure yet, but there is a small chance I may possibly be working at this event...fingers crossed!



Yeah Phill. might have to see what I can do in this department also!!

btw, nice work on the write ups in QLD Streetcar mate.

HSV
Post #574

QUOTE (DeadSled @ Dec 13 2010, 06:32 PM) *
Sounds good to me Ben. My Dad painted our old HR and it came up alright i think.


I've never sprayed a car but as above, my Dad has done one and it came up alright. I've got a mate whos a painter who said he'd be keen to paint but i'll be doing all the sanding and prep work.

Lol as for the cam / head.. i'm sure its better than what i'm running haha. I swear i have all of 50hp at the moment.


No worries man, early next month once I'm settled in the new place I'll give you a bell, none of its major, I even have the paint here as well to do it.

ben042
Post #575

.

DeadSled
Post #576

QUOTE (HSV @ Dec 13 2010, 10:09 PM) *
No worries man, early next month once I'm settled in the new place I'll give you a bell, none of its major, I even have the paint here as well to do it.

Sounds good to me. You have any welders or compressors or anything at yours? I can always bring my Tig down if needed for the rust repairs.

If no compressor you could drop the nosecone and paint off here and we'll get it sprayed for you if need be.

racerphill
Post #577

QUOTE (GTS454 @ Dec 13 2010, 10:53 PM) *
Yeah Phill. might have to see what I can do in this department also!!

btw, nice work on the write ups in QLD Streetcar mate.



Thanks mate.

Yeah, if I am working at the powerplay, it'll actually be a little different than my usual gig. Dont wanna say too much cause it's only a small
chance of getting the gig, but would be awesome if I did!

Phill

GTS454
Post #578

QUOTE (racerphill @ Dec 14 2010, 05:55 AM) *
Thanks mate.

Yeah, if I am working at the powerplay, it'll actually be a little different than my usual gig. Dont wanna say too much cause it's only a small
chance of getting the gig, but would be awesome if I did!

Phill


I'm interested... shoot me a text or something!!

HSV
Post #579

QUOTE (DeadSled @ Dec 14 2010, 01:08 AM) *
Sounds good to me. You have any welders or compressors or anything at yours? I can always bring my Tig down if needed for the rust repairs.

If no compressor you could drop the nosecone and paint off here and we'll get it sprayed for you if need be.


I'll have a mig at mine and I have a compressor, but might be a bit small maybe for painting?

90% of the rust repairs will be piss easy, minor bubbling doors etc just the drivers side dog leg is the worst of it.

DeadSled
Post #580

QUOTE (HSV @ Dec 14 2010, 11:44 AM) *
I'll have a mig at mine and I have a compressor, but might be a bit small maybe for painting?

90% of the rust repairs will be piss easy, minor bubbling doors etc just the drivers side dog leg is the worst of it.

Oh yep. Sounds good then Ben, let me know when you need it done.

-Jordan-
Post #581

Whole bunch of new parts arrived today! :happy:

Sent from the US on Friday, arrived today... sweeeeeeeeet.

GTS454
Post #582

Dude... they are in unmarked boxes... how are we supposed to know whats in em? quick service though!

-Jordan-
Post #583

haha, yeah - the boxes looked more impressive than the parts :shocked:

Mainly just interior parts really, all Camaro specific parts that I can only get over there. All the go-fast parts I'll be trying to get over here.

Door cards, rear seat material (probably putting the Maserati front seats in, damn I love those things), carpet, replacing everything on the dash etc plus entire new rubber kit... plus a whole bunch of other stuff that I've probably forgotten about (another box on its way, making another order tonight + new boot lid being sent up minus the spoiler, love the smooth lines).

The quality of the parts is unreal though, feels so much better knowing stuff like this will be going on rather than recovering my own like the XB.




Plus for anyone interested, have a quick video of me idling up the street. Not really game to give it a bootful until its atleast registered.

btw - the sound gets extremely muffled, it actually does sound awesome - not like that.

jwebb2876
Post #584

The mic on that camera sounds fucked. Love the Camaro though, looks great :)

-Jordan-
Post #585

haha, yeah, it was from my phone, really didn't handle it well

cheers though! should look even better with new paint / get the rear end down / nice lights etc

need to find a decent camera...

-Jordan-
Post #586

Unsure if it's already been mentioned, but congrats to Ben for getting into the latest Qld Street Car.

Still of the opinion it should have been on the first part instead of the chrome hummer, but whatever.

:P

lil_bobby_260
Post #587

Holy shit Jordan that thing is incredible...
Tho i think you should run a larger rear tyre... or not. Why do you still have the XB when you have a bloody CAMARO?

-Jordan-
Post #588

QUOTE (lil_bobby_260 @ Dec 17 2010, 10:14 PM) *
Holy shit Jordan that thing is incredible...
Tho i think you should run a larger rear tyre... or not. Why do you still have the XB when you have a bloody CAMARO?


haha, cheers :unsure:

They are a bit wide! Still unsure what I'm doing with the wheels, the ones on there do give it a really tough look. Either way I want the guards flared a little so I can lower the back down a bit. Not tucking under, just not big spaces.

Still got a bit of a thing for the XB, plus I'm not overly keen on driving the camaro down to the shops and leaving it with all the tards and their trolleys, so XB will be given the daily duties until (if) I decide to sell it. Plus the camaro is getting stripped down so won't be driving anywhere for a bit. Things are moving along well though!

jwebb2876
Post #589

Decided that if I keep my Scorp I'll be pissing off the Mitsubishi drivetrain for something with a bit more poke/reliability, and as I want to keep it somewhat in the family I decided on a 318/4spd combo with a 4.11 Hilux diff.
Won't be happening for a while as I'm a poor @#$!, but still. Planning never hurts :unsure:
Thoughts?

HSV
Post #590

QUOTE (DeadSled @ Dec 14 2010, 12:09 PM) *
Oh yep. Sounds good then Ben, let me know when you need it done.


Will do, I've moved everything bar the Monaro into the new place now, just having trouble finding a frigging tow truck company that won't charge me a friggen arm and a leg to move it.

Worse comes to worse will pick mates trailer up but I've hit that stage that by the time I put fuel in, go get mates trailer, strap it down, bring it back, unstrap, unload, take trailer back etc, it's almost the same cost as getting a towie to do it, and less hassle for me lol.

But the price they want for me to retrieve it from my old's place where it was stored whilst we were moving at Woody Point to my place at Loganholme, they want over $200 for.

fingerbanger
Post #591

QUOTE (HSV @ Dec 20 2010, 08:29 AM) *
Will do, I've moved everything bar the Monaro into the new place now, just having trouble finding a frigging tow truck company that won't charge me a friggen arm and a leg to move it.

Worse comes to worse will pick mates trailer up but I've hit that stage that by the time I put fuel in, go get mates trailer, strap it down, bring it back, unstrap, unload, take trailer back etc, it's almost the same cost as getting a towie to do it, and less hassle for me lol.

But the price they want for me to retrieve it from my old's place where it was stored whilst we were moving at Woody Point to my place at Loganholme, they want over $200 for.


Give this guy a call

Darren 0404 003 370

Nice bloke (loves a chat) and has an appreciation for older cars.

DeadSled
Post #592

QUOTE (HSV @ Dec 20 2010, 08:29 AM) *
Will do, I've moved everything bar the Monaro into the new place now, just having trouble finding a frigging tow truck company that won't charge me a friggen arm and a leg to move it.

Worse comes to worse will pick mates trailer up but I've hit that stage that by the time I put fuel in, go get mates trailer, strap it down, bring it back, unstrap, unload, take trailer back etc, it's almost the same cost as getting a towie to do it, and less hassle for me lol.

But the price they want for me to retrieve it from my old's place where it was stored whilst we were moving at Woody Point to my place at Loganholme, they want over $200 for.

Your new place is in Loganholme? Where abouts? I'm at Shailer Park. Let me know when you've got it there and i'll cruise over and have a look.

GTRVspec95
Post #593

QUOTE (DeadSled @ Dec 20 2010, 04:02 PM) *
Your new place is in Loganholme? Where abouts? I'm at Shailer Park. Let me know when you've got it there and i'll cruise over and have a look.


Ex-Trailer Parkian represent :bowrofl:

Someone find me a LX Torana hatch and I'll get my bogan on at HSV's

HSV
Post #594

QUOTE (DeadSled @ Dec 20 2010, 04:02 PM) *
Your new place is in Loganholme? Where abouts? I'm at Shailer Park. Let me know when you've got it there and i'll cruise over and have a look.


Hopefully it will be there this week, time permitting, otherwise I will have to wait until mid Jan to pick the damn thing up.............

I've got tomorrow off, might even pop over and grab it tomorrow if I can.

I'm on Drews Rd down near the river, and I've got something on my wall you would love.............

QUOTE (GTRVspec95 @ Dec 20 2010, 04:28 PM) *
Ex-Trailer Parkian represent ;)

Someone find me a LX Torana hatch and I'll get my bogan on at HSV's


Intrawebs on tomorrow so I'll start having a look for you then champ.

DeadSled
Post #595

Haha what do you have on your wall that i'd love?

I know Drews rd very well, got a mate that lives off Clarks rd whos got an ex Thunderdome racecar HQ and his dad has a Camaro. Hes on here, name is CAM327.

Let me know when your all settled in mate and i'll come around for a yarn.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 17 of 107
Jump to page
20 User(s) are reading this topic (20 Guests and 0 Anonymous Users)
0 Members:
Loading...
x