Back

 High_hp's Nissan - Nissan Skyline 33GTR Vspec  

Page 3 of 4
Jump to page
Upload Entry
high_hp
Post #71

QUOTE (TwinCam16 @ Jul 25 2010, 05:57 PM) *
Also with reference to draven beign proven "wrong" he hasn't been.

Legally this car could not be complied in Australia.

Hats off the the owner for finding someone who can / would do it.

But think about it, and the owner has already mentioned this, how many kids come on here, tyre kickers if you must, and brag about cars they are importing with this that and the other done to it.

I would have said the same thing as Draven.

Move on.

u guys are right like i said its not what ya know its who ya know,,,,,,i made this machine happen i didnt build it but i do know the full history of the car the engine was built 3 -4 months ago the car has 66000kms on it the engine is fully worked,,,,,and when this thing idles it rocks the car from side to side its fuckin insane i will put a list of whats been done to engine

bsx_comp_9
Post #72

fckn sexy...simple

Pattax
Post #73

NICE NICE NICE rims

high_hp
Post #74

QUOTE (high_hp @ Jul 25 2010, 06:11 PM) *
u guys are right like i said its not what ya know its who ya know,,,,,,i made this machine happen i didnt build it but i do know the full history of the car the engine was built 3 -4 months ago the car has 66000kms on it the engine is fully worked,,,,,and when this thing idles it rocks the car from side to side its fuckin insane i will put a list of whats been done to engine

CYLINDER BLOCK NISSAN STD.
CRANK SHAFT " (FULL BALANCED)
PISTON " (86.0Φ)
CON-ROD "
HEAD GASKET TOMEI METAL (1.2mm)
INTAKE-EX.MANI GASKET "
CAM PULLEY " (ADJUSTABLE)
CAM SHAFT IN. APEX V-MAX (270°　9.15mm)
" EX. " (280°　9.15mm)
VALVE NISSAN STD.
VALVE SPRING " (REV.LIMIT 8300rpm)

TURBINE TRUST T88-34D 15cm
EX.MANI " ALL STAINLESS
WASTEGATE " TYPE-C HIGH FLOW
MUFFLER ORIGINAL TITAN 100Φ　　　

CLUTH EXEDY METAL TRIPLE(TYPE Drag)
MISSION GEAR OS-GIKEN 1-2-3 CROSS RATIO
FRONT LSD. CUSCO 4-PINION 1WAY
REAR LSD. NISSAN STD. 4-PINION 2WAY
FINAL GEAR RATIO 4.1

ECU APEX POWER-FC D-JETRO
FUEL INJECTOR DENSO 720cc/min LOW RESIST
FUEL PUMP DENSO 280L/min ×3(DIRECT DRIVE)
FUEL DELIVERY PIPE TRUST 11.0Φ
FUEL REGULATOR SARD TYPE-J HIGH FLOW
FUEL CORRECTOR TANK " (5L)

MAX BOOST 1.6 K
MAX HORSE POWER 710HP



TwinCam16
Post #75

QUOTE (GTRVspec95 @ Jul 25 2010, 06:06 PM) *
It was also to prevent the unscrupulous importers bringing cut-and-shuts and dirt cheap accident repaired cars into the country.

This car has obviously had a wealthy owner in Japan do the mods and its a shame that these monster 'technically' aren't allowed into the country


That as well.

flyboy11
Post #76

That is hot!! Nice ride.. Gotta love 33's :-)

TurboXR
Post #77

Fuck yeah that's insane, bet if someone was to built that the same in Aus it would cost a bucket load of $$. Take it down the quarter mate and post up the dyno sheet and a timeslip!

Draven
Post #78

Well i tip my hat to you! Yes i was wrong, bag me out if you like.

OT: Not a fan of skylines but this one is tastefull, well done...



QUOTE (TwinCam16 @ Jul 25 2010, 01:45 PM) *
You can understand why Draven said what he did though.


This...

Pics were when it was stil oversea's etc, get a lot of wanna be dreamers posting up bullshit, thats how it originally came across. In the end i was wrong.
high_hp
Post #79

QUOTE (Draven @ Jul 25 2010, 06:36 PM) *
Well i tip my hat to you! Yes i was wrong, bag me out if you like.

OT: Not a fan of skylines but this one is tastefull, well done...





This...

Pics were when it was stil oversea's etc, get a lot of wanna be dreamers posting up bullshit, thats how it originally came across. In the end i was wrong.

thanks draven i accept ur appolagy

Draven
Post #80

thumbsup.gif

lil_ashy
Post #81

argue.gif beer.gif dunno.gif

Darkness
Post #82

QUOTE (GSXR_Bryza @ Jul 25 2010, 02:30 PM) *
*slurp* *slurp* *slurp* you like that High_hp baby? *slurp* *slurp* *slurp*


That's all I read that post as.

Darkness
Post #83

QUOTE (Draven @ Jul 25 2010, 06:06 PM) *
Well i tip my hat to you! Yes i was wrong, bag me out if you like.

OT: Not a fan of skylines but this one is tastefull, well done...





This...

Pics were when it was stil oversea's etc, get a lot of wanna be dreamers posting up bullshit, thats how it originally came across. In the end i was wrong.


Well there you go, he is a bigger man than most of you kids on here.

Darkness
Post #84

QUOTE (TPG @ Jul 25 2010, 04:09 PM) *
I'm sorry, but the more I read through this thread the more it comes to my attention that whilst you have a great car, you are simple minded.


There is that as well.

jish
Post #85

QUOTE (GSXR_Bryza @ Jul 25 2010, 04:47 PM) *
yeah i read what you said.
sorry IF i have miss interpenetrated what you said bro.
For that i am so sorry rolleyes.gif
start ass ....
sorry im not a computer nerd bro eek.gif ..
go back to playing with ya matchbox cars and computer games...
leave this to the men little fella..
enter
enter ... wank


I'm a start ass am I? What the fuck is a start ass?

I'm sorry, but just because I like to read content that actually has thought put into it and not just tough guy bullshit, does not make me a computer nerd.

Infact, would you believe, most of the general/regular users on here would agree on this thumbsup.gif

QUOTE (GSXR_Bryza @ Jul 25 2010, 04:56 PM) *
Easy... get a real mechanic built the car properly.. it aint all held together with zips ties and glue that some dum red neck put together in the back yard..


QUOTE (GTS33SOM @ Jul 25 2010, 05:04 PM) *
What has that got to do with the compliance?


Bingo, you obviously don't know too much. What was that about real men? The real men must be pretty thick.

QUOTE (GTRVspec95 @ Jul 25 2010, 05:25 PM) *
GT-R's with Panasports ... old school tuning

To legally comply that you'd have to return pretty much everything back to stock standard


There we go!

QUOTE (Mr Oriel @ Jul 25 2010, 05:30 PM) *
lol @ noobs paying him out then realizing he has the goods to back it up.

really are a bunch of 'quick to assume' judgemental c**ts aren't yas ? lol


As above, it wasn't complied "legally" so too speak. Therefore what was said last time was warranted.

QUOTE (TwinCam16 @ Jul 25 2010, 05:57 PM) *
Also with reference to draven beign proven "wrong" he hasn't been.

Legally this car could not be complied in Australia.

Hats off the the owner for finding someone who can / would do it.

But think about it, and the owner has already mentioned this, how many kids come on here, tyre kickers if you must, and brag about cars they are importing with this that and the other done to it.

I would have said the same thing as Draven.

Move on.


And this. I honestly don't have an issue with the fact it was "complied" tongue.gif I have an issue with people getting on their highhorse that Draven was 'wrong'. We all thought it, and personally, if you looked at the old ad and didn't agree with what everyone was saying, you're kidding yourself.

Personally, I'd love to see this car out and about to have a looksie.

MR 3KGT
Post #86

LOL this thread is full of fucking LULZ.

For you to get a heavily modified 710hp skyline complianced would have ONLY been possible if you imported the car through a Jap Car Importer with IN HOUSE compliancing.

They'd have made sure everything else was compliant and "overlook" the engine and claim it was stock.

Otherwise how the fuck would you get it complianced without having to take it back to full on stock?

Or am I missing something?

Mr Oriel
Post #87

True that he posted images too soon and yes the fact about car needs to be standard for compliance - however I still think people here are far too quick to judge and assume (and then hope that they really are correct) so good man Draven for apologizing.

Don't think this debate needs to go on any further - done and done. Now we need local dyno chart =)

MR 3KGT
Post #88

I'm still waiting for an explanation on HOW he got it complianced lol!

Darkness
Post #89

QUOTE (MR 3KGT @ Jul 25 2010, 07:30 PM) *
I'm still waiting for an explanation on HOW he got it complianced lol!


By the sounds of it, on the dodge.

MR 3KGT
Post #90

Would take Draven one phone call if he wanted payback then LOL.

I'm unbiased here, I really couldn't give 2 fucks about this whole situation.

I'm impressed that he managed to get the car complianced. Good work man, pulling shit like that off isn't easy but posting it on a forum was a bad mistake on your part.

I've looked at some monsters in Japan but have been advised by many workshops there's no way in hell they could compliance em without having to strip it back to stock.

Good luck with it champ thumbsup.gif

aussieontour
Post #91

QUOTE (MR 3KGT @ Jul 25 2010, 08:20 PM) *
Would take Draven one phone call if he wanted payback then LOL.


Wouldn't matter as he "could" have done the work after compliance.


Nice car, get a local dyno print up when you can.

TRD_4age
Post #92

WHOLEY FUCK IT"S THE INTERNET PEOPLE GET OVER YOUR SELFS. the guy posted up his ride so people can see what his hard earnt money bought him. FUCK!!!!!!!!!

vomit
Post #93

Very nice car, good buy.

GSXR_Bryza
Post #94

QUOTE (TRD_4age @ Jul 25 2010, 08:33 PM) *
WHOLEY FUCK IT"S THE INTERNET PEOPLE GET OVER YOUR SELFS. the guy posted up his ride so people can see what his hard earnt money bought him. FUCK!!!!!!!!!

i agree !

GSXR_Bryza
Post #95

it is very cool to see so many people that are interested imports!.. but i have to say fuck it i'm over cars....i'll stick to my gixxer.... peace guys...sorry if i got narky...

ih8wrx
Post #96

All the stickers wreck it for me. Looks hot otherwise.

krayziebenno
Post #97

i cannot fault this car!!! such a machine!!!

clutch-monkey
Post #98

nice hp figure!

rx freak
Post #99

woop woop good on ya sam!!!!! showed everyone!!! hahahahahaha this thing is off tap bro!!! talk soon bro

high_hp
Post #100

QUOTE (rx freak @ Jul 26 2010, 12:59 PM) *
woop woop good on ya sam!!!!! showed everyone!!! hahahahahaha this thing is off tap bro!!! talk soon bro

hey guys yes i did get compliancing done in house ,,,yes it was a fuck around but at the end of the day i said it could be done and now its on the road .............as for u mr rx freak good to here from u will try and catch up with u when i get to brissy c yas

TurboXR
Post #101

put your dyno sheet up mate

Freddyk007
Post #102

this is insane bro nice.

that_cressy_guy
Post #103

very tough. . not a fan of the rims personaly. a nice set of volk gt-c's would go nicely. thumbsup.gif

well done mate

iRice
Post #104

yewww

$upa$tar
Post #105

yeah im keen to see the dyno sheet.. just to see the line go highhhh

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 3 of 4
Jump to page
14 User(s) are reading this topic (14 Guests and 0 Anonymous Users)
0 Members:
Loading...
x