Back

 Nt Drift  

Page 53 of 58
Jump to page
Post Topic
J-moNeY
Post #1821

QUOTE (kirst @ Jul 19 2010, 11:22 PM) *
you obviously dont know what is parked in the driveway then

I bet its not even 300kw pffffft weak

mitch_r32
Post #1822

Wow nice shots! can't wait to see the rest!

Should have put the face back on :P

JET_RB25
Post #1823

QUOTE (kirst @ Jul 19 2010, 10:22 PM) *
you obviously dont know what is parked in the driveway then



Why was it not at the track Kirst. Dan is killing us with this shit. I so wanna see the orange beast on the black stuff.

kirst
Post #1824

lol orange beast is stock as unde the hood - and waiting on lock tabs so i can put the turbo/mani back on... if it makes it to the track it will spend its time ripple strip jumping with me trying to control it :dunno:

silvia blew the clutch slave cyl last week, n it is getting rebuilt hopefully this week.... but even so, it wont go on the track yet due to it running a little lean at the top end - not keen on blowing that one up yet!!

thats why dan bought the lorry, so he could have some fun and not worry about blowing/crashing it - but suprisingly enough the lorry is actually fairly quick, n pulls pretty hard too - he just took forever to fine tune the suspension on sunday. but for the first time out in a car he has own maybe 3-4 wks, plus he hasnt seen a track in over 2yrs - he was happy with his results
oh and it wouldve been good if he had of at least had an option of a handbrake too - but oh well, next time! :P

JET_RB25
Post #1825

Oh so he brought the Lori. Its a good car that and is pretty dam quick for what it is. I mean its only SR LOL so not that quick but a good car to throw around with out a care in the world. He did pretty well and had some balls i will give him that.

Cant wait to see him progress. Let him know he did well.

Even Laurie said he has alot of potential.

incubus
Post #1826

just go and get an r31 slave cylinder for repco kirst

bdup888
Post #1827

..........

bdup888
Post #1828

QUOTE (taffywing @ Jul 19 2010, 08:52 PM) *
nah, no rage, just shitty when casual attendees think they know it all....

I have never once stated I know it all and I didn't know I needed your permission sir king of all that is bogan to post on this fine forum.

JET_RB25
Post #1829

VL Turbo Drift Car For Sale

FOR SALE:
VL Drift Car, RB30 Turbo, 5 speed
Mods include:
Kmac Full Race adjustable caster /camber tops
KYB Adjustable Front Shocks
Dobinson Heavy Duty Front Springs
Stainless Steel Strut Brace
Double Sway Bars Front and Rear
Modified Rear Spring Mounts To Suit Race Car type Coil Springs
Patrol (fronts) as Rear Shocks
Mini Spool Diff
Aluminium Fuel tank
Stainless Steel Surge Tank
Custom Built Plenum Chamber
XF Throttle Body
Big FMIC
BOV
Rb25 Turbo
Modified Dump Pipe To Suit Rb25>VL
POD Filter
2 Stage Boost Controller(not connected)
Roll Cage
Alum Dash Panel
Custom wiring ,fuse box and relays inside cabin Resetable fuses Battery Box Behind Seat
Comes With:
Spare gearbox,
Clutch ,Flywheel
Front Guards, Bonnet, Nose Cone
Lights
Radiator
Steering Rack
12x 17inch mags(4 on car)
Computers
Brake Booster/master cyl
Box of spares
$4500 or nearest offer.
Contact Gavin at: [email protected]


Pics:

kirst
Post #1830

QUOTE (incubus @ Jul 19 2010, 10:59 PM) *
just go and get an r31 slave cylinder for repco kirst


nah we need a r33 series 1 - too hard to find so just getting it rebuilt which is only about $50 anyway

J-moNeY
Post #1831

QUOTE (kirst @ Jul 20 2010, 04:53 PM) *
nah we need a r33 series 1 - too hard to find so just getting it rebuilt which is only about $50 anyway

surely other cars would have the same part, is there any nissans that dont share parts from 5 other models?

kirst
Post #1832

rb25's n 26's have the good one - the others all share a weaker version

incubus
Post #1833

jb4055

rx2re
Post #1834

Jay Bouchere - mazda rx7 sunday 17 july 2010
http://www.highrpm.com.au/forums/showthrea...PM-TEDA-Video-s

more pics

http://www.highrpm.com.au/forums/showthrea...-Practice/page2

taffywing
Post #1835

QUOTE (bdup888 @ Jul 19 2010, 11:27 PM) *
I have never once stated I know it all and I didn't know I needed your permission sir king of all that is bogan to post on this fine forum.


my comment wasn't directed at you in the first place but now you have banged your gums, you can take your ricer attitude and fuck off with the rest of them..

p.s if you have a problem then i am not hard to find.

kirst
Post #1836

lol @ throttle mashers getting emo in drifting thread :P

incubus
Post #1837

go quote the part number i posted above. it's what i have listed for the turdytree skyrice

bdup888
Post #1838

QUOTE (taffywing @ Jul 20 2010, 10:11 PM) *
my comment wasn't directed at you in the first place but now you have banged your gums, you can take your ricer attitude and fuck off with the rest of them..

p.s if you have a problem then i am not hard to find.

dude you quoted me in your post thus directing your comment at me.....back peddle much.

its nice how the knuckle draggers always gotta puff their chest.....

INDMNY
Post #1839

hey bj is that shanes vl you put up 4 sale??? pm me pictures

vh-holden
Post #1840

QUOTE (INDMNY @ Jul 21 2010, 06:07 AM) *
hey bj is that shanes vl you put up 4 sale??? pm me pictures

I'm pretty sure that is the gold one that was out last year. Surprisngly owned by a guy called Gavin!

JET_RB25
Post #1841

Yeah mate its the one that Gavin owns. The Gold color one with the red roll cage. Jump on the High RPM website its all on there in the vehicles for sale sections.

rx2re
Post #1842

QUOTE (INDMNY @ Jul 21 2010, 06:07 AM) *
hey bj is that shanes vl you put up 4 sale??? pm me pictures



http://www.highrpm.com.au/forums/showthrea...ft-Car-For-Sale

Territory Laser Cutting
Post #1843

Not sure if these were posted already.....

http://vimeo.com/13514569

http://vimeo.com/13513670

http://vimeo.com/13513310

I know Im looking forward to seeing the rest of the video.... Hint hint.

As always, Ed and High RPM delivering the best quality video footage available, thanks guys.

Territory Laser Cutting
Post #1844

I know it looks a bit slow... but most of us were coming in at about 90 - 100kmh with hand brake, I was coming in at about 85-90kmh, with clutch kick in second, will be trying 3rd from now on, 2nd was too slow. :)

vh-holden
Post #1845

Thought I might as well chuck this up here. Took it the other night at the workshop.

JET_RB25
Post #1846

definately come in at third mate. Scando it and back to second if you dont have the power but it should be able to pull through third saving an additional gear change in the middle of the corner.

JET_RB25
Post #1847

Oh and top Pic Adam.

Rattler
Post #1848

Very nice photo Adam and car is looking sweet!! :P

VLCT WALKY
Post #1849

Ditto that! Darwins own D1 car! So Sexy, so professionally presented!

VLCT WALKY
Post #1850

P.s krist re ed been worried about whats in your drive way, his car makes more power on low boost then yours does!

I love drifting, and love drag racing and circuit racing and burnouts! cant everyone just hug!

rx2re
Post #1851

ive put move vids up on www.HighRPM.com.au/forum in the TEDA Drift Video Thread.

i dont visit here anymore, so i wont be posting much.

You will need to keep an eye on highrpm site.

Later.

Territory Laser Cutting
Post #1852

Sick!!! You even make me look half decent out there, thanks Ed.

http://vimeo.com/13717751

http://vimeo.com/13730942

Boostcruise is good for bitching and bullshit, but if you want genuine automotive satisfaction, please sign up to HighRPM.com and support Ed and his team.

supraddict
Post #1853

That was fucking sick Shane, good work mate :P

Nice camera work too Ed

rx2re
Post #1854

QUOTE (Territory Laser Cutting @ Jul 30 2010, 01:35 PM) *
Sick!!! You even make me look half decent out there, thanks Ed.

http://vimeo.com/13717751

http://vimeo.com/13730942

Boostcruise is good for bitching and bullshit, but if you want genuine automotive satisfaction, please sign up to HighRPM.com and support Ed and his team.



Any time mate. Im more than happy to help you guys out.

As Shane said, come and join up at Highrpm and start posting.

JET_RB25
Post #1855

Talk about clipping the Apex Shano good work mate well done.


Needs to be said to that Dan was out there in the Lori for the first time and did dam well.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 53 of 58
Jump to page
THIS TOPIC HAS BEEN ARCHIVED
48 User(s) are reading this topic (48 Guests and 0 Anonymous Users)
0 Members:
Loading...
x