sleepercorty
Post #1296
nice dude very nice, pretty sure you'll be the fastest cressida in qld at present? if any 1 can correct me????? do you have any other pics? and it is a 1j???? so standard 1j bottom end or you got the 1.5jz? yeh standard 1jz not 1.5j, yeh i would say fastest cressida in qld unless there are some fast ones hiding somewhere that knowone knows about. car is also standard 1jz gearbox with mv valve body and 4000rpm convertor are the only mods. i think the goal for the car is to get it to about 128mph and closer to 10.5 street tires and pump fuel and that will be about where it stops as my wife still uses the car on a daily basis and dont want to go putting a cage and harnesses in it. then i can get stuck back into my cortina and see if i can get it to run a 9 |
---|
pig060
Post #1297
well my car will be off the road for a couple of weeks again new mt 255's and 5000 rpm take off's dont go to good together lol. not sure yet if its the box again or my clutch but thinking more along the line of clutch with what its doing but f#$k it takes of so much harder now so cant wait to race it again soon with the boost higher. |
---|
sleepercorty
Post #1298
well my car will be off the road for a couple of weeks again new mt 255's and 5000 rpm take off's dont go to good together lol. not sure yet if its the box again or my clutch but thinking more along the line of clutch with what its doing but f#$k it takes of so much harder now so cant wait to race it again soon with the boost higher. what clutch do you have in it, let me know if you need a new one as i can get you one at a very good rate. |
---|
pig060
Post #1299
ill keep it in mind cheers. its a custom 5puk npc clutch. its about 6months old but done bugger all k's so far. normally works really good so im not sure whats rong until i pull it apart. i'm going auto at a later stage but i said if it brakes again im going auto hehehe not yet but im having to much fun with the manual but i just keep braking shit |
---|
sleepercorty
Post #1300
ill keep it in mind cheers. its a custom 5puk npc clutch. its about 6months old but done bugger all k's so far. normally works really good so im not sure whats rong until i pull it apart. i'm going auto at a later stage but i said if it brakes again im going auto hehehe not yet but im having to much fun with the manual but i just keep braking shit NPC do very good clutches. if its a fault with the clutch they are usually pretty good with warranty side of things, i sell quite alot of there ctutches. we sold one the other day that is going into a ae86 with 1jz and gt40 |
---|
sleepercorty
Post #1302
how much did you sell it for??? what is it rated at??? cant remember how much it was but will look tomorrow |
---|
sleepercorty
Post #1304
how much did you sell it for??? what is it rated at??? it was about $1300 but that included there billet flywheel. is rated to 600rwhp, being that you already have a flywheel would be $900-$1000 i would imagine |
---|
pig060
Post #1305
sounds like what i have in mine but i got it cheaper then that. i spoke with them today and they seem to think its got hot under heavy load and stuck to the flywheel. so ive gotta get to off somehow and hope thats all hehehe. ill see how i go over the next couple of days and hope thats all it is. thanks for checking anyway dude. |
---|
sleepercorty
Post #1306
sounds like what i have in mine but i got it cheaper then that. i spoke with them today and they seem to think its got hot under heavy load and stuck to the flywheel. so ive gotta get to off somehow and hope thats all hehehe. ill see how i go over the next couple of days and hope thats all it is. thanks for checking anyway dude. no problem hope you get it fixed soon so we can go racing. my 1000cc injectors should show up this week |
---|
sleepercorty
Post #1308
sweet are you going to get a new tune once there in??? yeh but i want to build my spare auto before injectors go in, so i can go lots of boost and not worry about gearbox as much |
---|
1.5jz cressida
Post #1310
well i just got a full leather interior for mine series 2 front bar, lights and gaurds, i just want a gtr front lip get it painted then il be stoked, can't wait to hit the strip |
---|
Susu'mann69
Post #1311
i got 1 but its stock as fuk! 89 model |
---|
sleepercorty
Post #1315
probably a few weeks yet, have to fit another fuel pump and build my gearbox first |
---|
1.5jz cressida
Post #1317
well my gearbox has new clutches in it now hopefully support the power, bought complete series two front end gaurds chrome stripping, full tan leather interior (front seats rear seats doors) and found a 32gtr front lip so soon as the cressida is home its getting an extreme make over. sleepycort thats looks awesome looking forward to seeing this beast and every 1 cars, mine isn't far off soon as its rego'd gotta be cruising |
---|
j.d.m
Post #1320
got a cressi for sale if anyone is interested |
---|
1.5jz cressida
Post #1322
my gearbox was rooted so new clutches and the converter is also rooted been told if i give the go ahead il have it back in the car end of the week |
---|
blackers10
Post #1323
glad to hear everybody's cars are coming together well |
---|
sleepercorty
Post #1324
glad to hear everybody's cars are coming together well I am still working out why my car takes a heap of cranks to start then splutters like its running on a couple of cylinders for a bit and then idles fine i get some black crap on the driveway from the exhaust (as a car does when it runs too rich) and a strong fuel smell from the exhaust just after start up and there is a very intermittent Buzz/vibration noise coming from the oil feed line to the turbo if i grab it i can feel the buzz through my hand it is a braided line any ideas gents? id say leaking injector/injectors would be the place to look |
---|
pig060
Post #1326
im not having much luck with this box lol i went to move my car this arvo to only smell gear oil so i had a look and the top shifter housing is leaking out every were and on the tail sharft which has flicked it all under the car hahaha. so i tryed to pull it out to replace the gasget to only find out that i gotta drop the cross member maybe tailsharft and what ever wants to get in the way but i still love the thing hehehe. |
---|
pig060
Post #1327
hows everyones cars??? im finaly driving mine again after waiting for a shifter housing gasget to come from japan as there was none in aus then got that in and running again to find out the rear seal on the box was leaking lol so thats all good again. now just time for a look over the car again and hope to get a new tune next week or 2. |
---|
bazr33
Post #1328
mine overheated just two days ago, due to the thermo fans stopped working. |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!