bazr33
Post #1226
Looking at puttin on a different turbo soonish |
---|
bazr33
Post #1228
has a 1.32 rear housing so should see full boost roughly the same if not slightly quicker as the t66 as it has similar size rear. But when the z comes on it should be pretty angry!!! |
---|
pig060
Post #1230
^^^ sounds good dude keep us posted. if you want all the info in the world about a jz conversion go into toyotacressida.net and ull find it all there other wise ill be typing for a while were did you find a jzx81 cut? there getting rare now days from what i hear. how many k's are on it? |
---|
bazr33
Post #1233
Car was dropped round tonight |
---|
blackers10
Post #1234
I still have NO idea what brand my turbo actually is... prev owner said it was a precision brand item but unless its stamped inside somewhere i can only see HYBRID stamped on the outside.. god damn it.. |
---|
pig060
Post #1235
let us now how you go baz. blackers10 does the turbo have any plate with writing on the main core of the turbo? near the oil line? (like the garrets do?) mine primes before i start the car thats abit wierd why it would do it after?if you need to change your injector seals you should try and find some 2jz injectors and get them cleaned/new seals (440cc) put in, unless your after bigger power and want big after market ones. 1jz's are 370cc so would be a nice small upgrade and bolt stright in. |
---|
bookie84
Post #1236
4000rpm is full boost on the t66. Im hoping the ball bearing t04 wont be too far away. maybe 4500. i'll see what happens, but might even switch the housings around. couldnt be bothered reading the whole thread but are you running 1j or 2j? On a t66 there is no way you would get full boost by 4k 1j unless you have cams? meh. I miss my 1j lol |
---|
sleepercorty
Post #1237
Car was dropped round tonight Should be ready tomorrow with cams installed, fuel reg. and we are going for switching the rear housing from the 66 onto the z. My crazy thought that the 1.32 would be worth while on the 2jz wasnt to be haha. Just would of come on too late and just when power starts to drop off will more likely when the turbo would kick in. So that idea has been scraped. So tomorrow will find out if the 66 rear will interchange (pleeaasee) and will go from there. Still waiting for my valvebody to arrive, then will be installed aswell if your t66 had a p trim wheel then the exhaust housing will interchange with the to4z. 1.0 rear housing is about as big as you want to go, my 1jz has a .7 rear housing with a t66 and i get boost at 4000rpm. i have a 4000rpm convertor and my wife drives the car everyday so is still very streetable. i had a 3400rpm convertor and ran 12.9 118mph 2.4 60 foot changed to 4000rpm convertor and ran 11.5 118mph 1.79 60 foot same tune and same boost. more boost and 1.6 60 foot hoping to be in the 10's |
---|
bazr33
Post #1238
I have a 2jz with us spec cams and I do get full boost pretty much spot on 4000rpm. t66 as a 1.02 or so rear. |
---|
bazr33
Post #1240
doing full tune tomorrow night. didnt get a chance to do it yesterday. |
---|
rotor_head_83
Post #1241
I have two jzx81 autoboxes sitting at my house (one has clutches slipping, the other has no reverse) - what should I do with them? |
---|
Aaron
Post #1242
^^^ sounds good dude keep us posted. if you want all the info in the world about a jz conversion go into toyotacressida.net and ull find it all there other wise ill be typing for a while were did you find a jzx81 cut? there getting rare now days from what i hear. how many k's are on it? Baz- 1.32 man thats going to be laggy hehehe when do you see full boost by now with the t66? mv do a 3400 stall which is ment to be really well for a street car with a single turbo (depending on your turbo etc). if i was to go auto again i would be looking around a 3500 for street/strip but my turbo would come on earlyer then yours would. should be good to see how well it goes after you sort all this stuff out yeah mate got it of a mate at work he was going to do a conversion but wrote the cressy off its got 120 odd thou on it auto and stock will probably keep it that way for a nice clean daily |
---|
bazr33
Post #1248
i have been in slacks creek every now and then to have my tune done. |
---|
blackers10
Post #1250
we can have a cruise any time once everybody has a car on the road LOL |
---|
blackers10
Post #1252
what did u do in regard to the charcoal canister on yours pig060? |
---|
bazr33
Post #1259
Pig060- will be a exciting time for you and hope everything goes well with your first child. |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!