Back

 Hyundai Excel Racing Series - Track Attack - Evil things are about to happen to Hyundai Excels  

Page 23 of 53
Jump to page
Post Topic
X3man
Post #771

Yeah +35's not so bad in a 6.5"
But +10's are going to be another 25mm futher out than yours, plus with a 7" rim add 6.35mm and the an 8" rim add another 12.7mm further out.
Even though my semi's would have a thicker side wall than road tyres, i think you'l find it tough fitting +10's under the standard body work.

trackattack
Post #772

QUOTE (NISMOgemini @ Mar 31 2010, 12:06 PM) *
Also available Compomotive 6 spoke wheels
15x8 + 10 offset - $150.00 each, waiting on confirmation on the PCD
are these available in 4x100 aswell??


Yes I can get them in 100 PCD, I think they come as a dual fit, just waiting on confirmation.

NISMOgemini
Post #773

any pics of what they look like?? could be keen on a set for my gemini

zorak
Post #774

QUOTE (High Boost Hero @ Feb 3 2010, 03:50 PM) *
You could have made it, standard silvia's


Who play's with excels?


well when the market comes to terms that paying through the nose for something thats worth as much as a hyundai excel they will be an abundance of cheap silvias/180s to go around and make a race series of....

I think people are missing the point of this, a race series that will cost you less than 2k to run in and will show who can drive and who cant... if I wasnt moving to Melb Id be all over this like a rash.

Well done guys, for the ones who get into it will be a heap of fun

trackattack
Post #775

QUOTE (NISMOgemini @ Mar 31 2010, 03:51 PM) *
any pics of what they look like?? could be keen on a set for my gemini


I am waiting on full spec, but I think its the M05 (either that or the M06)

Offsets Available: et00 & et25>32
3, 4 or 5 Stud Fitments
(Rallyraid Spec)

trackattack
Post #776

I have 2 x spring packages available.

Kings Low Package - $340.00
* Front Springs KHFL-114 x 2
* Rear Springs KHFL-124 x 2

or our Track Attack Special Pack that we are running on our car - $440.00
(The spring codes are a secret....shhhh)

I also have a shock package
Boges BO32 and 27 - $ 190.00 each ($760 for 4)
(basically aftermarket BMW)
I know there are a heap of options,
but we figured the Boges were a good shock without going top of the line.

Rear Swaybar $195 as mentioned before.

Cheers Jeff

checkout - http://www.trackattack.com.au/suspension

benno.h
Post #777

QUOTE (trackattack @ Mar 31 2010, 04:27 PM) *
I have 2 x spring packages available.

Kings Low Package - $340.00
* Front Springs KHFL-114 x 2
* Rear Springs KHFL-124 x 2

or our Track Attack Special Pack that we are running on our car - $440.00
(The spring codes are a secret....shhhh)


What spring rates for the Track Attack specials?

trackattack
Post #778

QUOTE (benno.h @ Mar 31 2010, 04:36 PM) *
What spring rates for the Track Attack specials?
nodrog
Post #779

Hey Jeff

Are you "retail outlets"??? Note the plural!!!!

Rule = After market springs are permitted provided that they are readily available at retail outlets

Out with the gos and the spring rates!!!! :) :bowrofl: :mamoru:

trackattack
Post #780

LOL..... just call me "Race Mart"
They are common springs, just not off an excel :)

trackattack
Post #781

I have 6 spots left if anybody is keen for a Track Day at Carnell this Easter Saturday
Afternoon sprints start at 12:00 so there is plenty if time to get there in the morning if you are just doing the sprints.

Motorkhana = $40
Sprints = $60

So if your keen get in quick - http://www.trackattack.com.au/carnell

Cheers Jeff
Track Attack.

Supported by

trackattack
Post #782

OK OK OK

Kings Lowered spring kit
front = 160
rear = 150

TA front = 40% stiffer
TA rear = 60% stiffer

We can get Kings or Pedders, whatever floats your boat.

should work nicely :)

They are a combination of springs off other cars that I have spent a bit of time researching and seem to be the best that I could come up with.
Its cheating to get custom springs made, but if you can buy a spring of another car that fits its all good !

I am hoping to have them in the car for the next sprint at Lakeside :cool:

X3man
Post #783

Trackattack, talk to Chris Tarrent at King Springs they will make custom springs for $170 a pair.
I know your rules say no custom springs, but it might be an option to improve the series next year.
Besides who can tell if the springs are the ones to suit the front of a 77 Chysler Galant, N15 Pulsar or custom ones.

slow bus
Post #784

I want royalities, another great idea of mine light car with heavy car springs. Jeff had given a big clue what they come off it has to be common is commodore. and if you get the ultra lows you can drop it on its nuts

Now I have shared alignment setting, whats the go? Iam thinking

As much camber and caster as you can muster( minimum 3 on the front but 5 would be better) I have got 2.5 from stock equipment I will run camber bolts in both top and bottom hole on the front, should get close to the 5)
3degree toe out front
2 degree toe out rear (is this possable)

I am waiting on my camber bolts from the US, if they are all good I will be able to supply a set of 4 for $50

xr8 5.0
Post #785

finaly got me a cheep excel that im going to try and have ready for next year but b4 i start working on it i just wanna know are the rules going to change from this year to next year. its just i dont wanna go spending the money on sumthing to find a better option next year???

WET_33
Post #786

sorry the above post was mine not xr8 5.0, we both use same computer

trackattack
Post #787

At this stage I wouldn't envisage any major changes.
If any changes come in that adversely affect performance there would be an amnesty period.

One of the big advantages of the Excel's is that you can start by doing sprints with a stock standard car and then do the mods as you gain experience. Spread the cost out over 12 months if you want.

WET_33
Post #788

i live 6hrs north of you guys so i was only really going to d the events at lakeside and qld raceway, i cant wait to have a go, t looks like heeps of fun tho it seems to be getting quiet serious never the less i cant wait

trackattack
Post #789

QUOTE (WET_33 @ Apr 1 2010, 08:19 AM) *
i live 6hrs north of you guys so i was only really going to d the events at lakeside and qld raceway, i cant wait to have a go, t looks like heeps of fun tho it seems to be getting quiet serious never the less i cant wait


are there any permanent race tracks up your way ?
I am currently hunting for tracks within a days drive to try to make a bit of a series out of.

NISMOgemini
Post #790

ill take a set of them bolts if you can get them

QUOTE (slow bus @ Apr 1 2010, 07:43 AM) *
I want royalities, another great idea of mine light car with heavy car springs. Jeff had given a big clue what they come off it has to be common is commodore. and if you get the ultra lows you can drop it on its nuts

Now I have shared alignment setting, whats the go? Iam thinking

As much camber and caster as you can muster( minimum 3 on the front but 5 would be better) I have got 2.5 from stock equipment I will run camber bolts in both top and bottom hole on the front, should get close to the 5)
3degree toe out front
2 degree toe out rear (is this possable)

I am waiting on my camber bolts from the US, if they are all good I will be able to supply a set of 4 for $50
WET_33
Post #791

na no tracks around here, i live in gladstone bout 500km north of brissy on the coast

wasas
Post #792

QUOTE (NISMOgemini @ Apr 1 2010, 09:34 AM) *
ill take a set of them bolts if you can get them

I'll take a set too,

slow bus
Post #793

QUOTE (wasas @ Apr 1 2010, 11:24 AM) *
I'll take a set too,


Should get them today, will check fitment and advise. It takes about 1 week to get them across.

NISMOgemini
Post #794

group buy everyone?? would save making multiple orders

trackattack
Post #795

If they make 4.0 deg I will take some.

Beannie
Post #796

QUOTE (trackattack @ Apr 1 2010, 04:52 PM) *
If they make 4.0 deg I will take some.


likewise!

Big_Red_
Post #797

QUOTE (slow bus @ Mar 30 2010, 07:58 PM) *
It is alot easier to take the source from the back of the guage cluster. The wire is still there even if you dont have a factory tacho

There were two white wires behind the guage cluster, got nothing from either of the pricks :)

QUOTE (brendo12 @ Mar 30 2010, 09:19 PM) *
my x3 twincam didnt have a wire behind the cluster, there is one from the ecu we took, ill check it tomorow at work and let u know tomorow if u havnt had any luck...

Yer i've got a x3 twin cam too.....was dreading venturing up into that web of wires but it looks like the last option.

trackattack
Post #798

SWAYBARS

It looks like i misquoted the swaybar sizes.
the front factory hollow is 22mm
upgrade to 22mm solid on the front ??

who has objections ?
thoughts?

The upgraded rear will stay as 18mm.

trackattack
Post #799

The Excel at Carnell Raceway
trackattack
Post #800

Next Sprint Dates are
Saturday the 10th at Qld Raceway
Sunday the 11th at Lakeside Raceway

http://www.trackattack.com.au/sprints

The EXcels will also be there to entertain the crowd, It doesn't get much cheaper than EXcel Racing !
Big_Red_
Post #801

How many Excel's entered for this weekend?

trackattack
Post #802

QUOTE (Big_Red_ @ Apr 5 2010, 10:31 AM) *
How many Excel's entered for this weekend?


5 so far - http://www.trackattack.com.au/2010/index.p...t&Itemid=61
But a lot of people wont have even thought about entering until after Easter, so I would imagine at least another 5 will enter in the next day or so.

Marlin
Post #803

Any results from Carnell yet..... Champ.

Marlin
Post #804

:P

trackattack
Post #805

QUOTE (Marlin @ Apr 5 2010, 01:29 PM) *
Any results from Carnell yet..... Champ.


The V-Dub guys till have them in Stanthorpe.
Probably covered in beer, sauce and oil by now :P
I should have them tomorrow, will post them up when I get them.
Cheers.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 23 of 53
Jump to page
70 User(s) are reading this topic (70 Guests and 0 Anonymous Users)
0 Members:
Loading...
x