Back

 Cressida - tell me bout urs  

Page 27 of 64
Jump to page
Post Topic
02JZE
Post #911

Cressida thread is dying off. How is the 2j in your cressida going pig060 ?

pig060
Post #912

yeah go very well, fitted up the clutch/box to the engine and the engine and box is in the car, intercooler mounted for for the pipe work, started to get the steampipe manifold made. tailsharft has been made and fitted. clutch pedal is pretty much all in just have to get a braded line made for it now. all the easy stuff like fuel lines are fitted and water lines etc, au falcon fans fitted, so yeah its coming along pretty good. intercooler piping, exhaust manifold, dump pipe with plumb back wastegate will be done and fitted up next week all going to plan.

02JZE
Post #913

Who is doing your cooler piping ? I need mine done but dont want to spend much.

pig060
Post #914

well the guy thats doing mine is not cheap but you get what you pay for.

02JZE
Post #915

Let me know what it costs once its on,

pig060
Post #916

ill see if he brakes it down for me or not as ill be getting my exhaust manifold, cooler piping, dump pipe with plumbback wastegate, traction control cut off the throttle body and a few other bits so i would say he will just give me a bill at the end.

G-uni7
Post #917

sounds like it going good pig
n p.s change ya rides no vr wid 2j
cressida 2j :hsdance:

pig060
Post #918

done happy now hahaha

1.5jz cressida
Post #919

QUOTE (pig060 @ Nov 2 2009, 07:26 PM) *
done happy now hahaha



get some pics up would you !!!!!!!

got the comp back waiting on 1 part which is here tomorrow and then its DYNO DYNO DYNO DYNO

pig060
Post #920

just a few pics for you guys to have a look. ive done more then whats in the pics but i just thought ill throw up a few that ive taken. intercooler pipe work and exhaust manifold should be done in the next week or so. just got the stainless exhaust manifold in this pic but have a new steampipe one being made. and my dump pipe and exhaust will be done after the other stuff is done just takes time. the last pic is of my custom 5puc npc clutch, billet flywheel, turbosmart external gate and gt35r
b-rad_drifter
Post #921

hey lads would any of happen to have a cheap 7m-ge or 7m-gte around?

pig060
Post #922

pm sent

1.5jz cressida
Post #923

looking fucking sweet i love your plates as well cant wait to see this thing

pig060
Post #924

i was ment to be getting my cooler piping done this week but the guy has to finish of the job before me so next week it should be done. my exhaust manifold is made and ready to fit just waiting to take the car to his place to do cooler piping at the same time.

rotor_head_83
Post #925

Are anyone's services for sale here?


I got a '91 MX83 Grande 7MGE (Grampa Mint Condition) and an '88 MX83 GLX with JZX81 1JZ-GTE conversion (+ goodies). Plan is to swap everything so I'm left with a grampa spec 1jz grande :hsdance:


Should be a bolt in jobbie, but I have limited mechanical knowledge/tools to do it. PM me if you're interested.

pig060
Post #926

good luck every ones trying to build/mod theres still lol.

pig060
Post #927

my car goes in tomorrow arvo to get the final fitting of my exhaust manifold, intercooler piping made and my dump/wastegate pipe made as well. cant wait to get this thing done :)

1.5jz cressida
Post #928

so what else will need to be after that is it just the tune???? who you getting to tune your car

rotor_head_83
Post #929

Who would you guys recommend to tune a 1jz, gt30r with microtech lt12s and x6 igniters? I'm in North Brissy.

pig060
Post #930

well once this guy does my cooler piping, exhaust manifold and dump pipe all thats left is just the exhaust from the dump back, get a new power steering line made and clutch line then i think it will be ready to get my ecu and injectors. efi performance will be doing my tuning at this stage. rotor_head_83 ive heard and seen a few good cars come out of efi performance and they now have the record for the fastest 1jz powered car in the country. they are in yatala.

pig060
Post #931

1.5jz- hows your coming along? got the new tune done yet? i went down to have a look at my car on sat and its coming along very nice. exhaust manifold is made, dump/wastegate pipe has been made, cooler piping is all done now just got to send of the manifold for hpc coating next week then once thats done it can be all put back together again.

sabolee88
Post #932

alotta comments

1.5jz cressida
Post #933

QUOTE (pig060 @ Nov 15 2009, 07:07 PM) *
1.5jz- hows your coming along? got the new tune done yet? i went down to have a look at my car on sat and its coming along very nice. exhaust manifold is made, dump/wastegate pipe has been made, cooler piping is all done now just got to send of the manifold for hpc coating next week then once thats done it can be all put back together again.



coming along nicely by the sounds of it im looking forward to seeing this out, my car is doin well saw it today new pulley is on custom powersteering bracket made, picked it up now just waiting for the tune its looking to be tuned wednesday :) so soon as its getting done/finished il post pics and dyno results, pete and i looking forward to it been waiting alone time alot of hard work so fingers crossed it pays off

1.5jz cressida
Post #934

QUOTE (sabolee88 @ Nov 16 2009, 01:50 PM) *
alotta comments



thats for your comment :)

OIM.666
Post #935

QUOTE (chris davey @ Oct 22 2009, 11:07 AM) *
what's done to it?
3 bar map sensor
logging
wideband
lt12s or lt16s?

Here is the list
Position, Car , Time, MPH, Rear end, Gearbox, Tyre, Who 60ft

1. MX83 9.36 @156 IRS auto street 1.50 60' 1jz747 (Shane) 1.51 2JZ
2. MX83 10.1 @ 143 IRS manual slicks Jay 2JZ
3. MX83 10.970 @127mph IRS auto street 1.75 60"(ct12a) Kade.
4. MX83 11.359 @119 IRS auto street Onboost (Milan)
5. MX83 12.5 @110 mph auto REAL street Adam 1.8
6. MX83 12.3 @ 118 IRS Man street SLE3PR 2JZ
7. MX83 12.36 @ 111.2 MPH Auto Street Ribfeast 1.86 (CT12A eBay steelies)
8. MX83 12.605 @107 IRS Manual street Jzx81-2NV 1.677
9. MX83 12.83 private test day, no slips Southo 2JZ
10. MX83 12.85 @ 105.58 MPH Auto REAL street Mr DOHC 1.74' 215/65/15
11. MX83 12.86 @111.78 mph manual street BKSOON {Nith} 2.095 225's
12. MX73 12.87 @109 IRS Auto street 321CYA
13. MX73 12.886 @ 107.15mph IRS Auto Street BigWorm 1.908
14. MX83 12.94 @ 107 IRS Auto Street PlacentaJuan 2.334 60'
15. MX73 12.982 @ 104 IRS auto street 1.904 60"(stv014)
16. MX83 13.021 @ 106MPH IRS Auto Street EvilJack (Andrew) 2.063
17. MX83 13.1 @ ?? IRS Man Street Meager
18 MX83 13.258 @ 106.93mph IRS auto Street 2.1 60' Officer doofy
19. MX83 13.271 @ 103.09 IRS Auto Street Jin~Jah 1.873 7M
20. MX83 13.318 @ 104.89 IRS Auto Street Hibba 2.105


Update it.
MX83 12.815 @ 106.22 IRS auto MT street OIM-666 1.79

pig060
Post #936

whats done to yours???

1.5jz cressida
Post #937

QUOTE (OIM.666 @ Nov 17 2009, 01:20 PM) *
Update it.
MX83 12.815 @ 106.22 IRS auto MT street OIM-666 1.79



its needs to be updated for my car as well just settle craig hows the cressida goin

02JZE
Post #938

Anyone know what id be looking at to change my exhaust manilfold to t3 flange to suit my turbo?

pig060
Post #939

ive got a 2j manifold with t3 flange on it? might swap you some parts of your wreck? it fits a cressida as i had it in to see if it would fit mine and it did. its just a stainless one.

OIM.666
Post #940

QUOTE (1.5jz cressida @ Nov 17 2009, 06:08 PM) *
its needs to be updated for my car as well just settle craig hows the cressida goin


Average, as can be expected. Might go better soon.

02JZE
Post #941

Yeah maybe but i just bought mine., What parts are you looking for off my wreck ?

pig060
Post #942

maybe left hand rear door, lh head light, and just a few other small bits.

1.5jz cressida
Post #943

i need front panels front left and right???? what you think??? $$$$$$$$$$$$$$$$$$$$

02JZE
Post #944

The left light isnt the best its like its got moisture in it. But yeah man id swap you that stuff for the t3 manifold.

02JZE
Post #945

2 front panels are yours for 100 bucks 1.5.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 27 of 64
Jump to page
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x