Holden Fuel Injected V8 Twin Turbo Vl Commodore  

Page 1 of 2
Jump to page
Taj666
  • Taj666
  • Devils Rotary
  • Member No.: 161,747
  • Joined: 28-February 09
  • Posts: 1,257
Post #1 post 14th April 2009 - 10:23 PM
WOULD YOU PAY $10,000 FOR THIS?? WHAT DO U THINK ITS WORTH!!

HOLDEN 308, IT HAS 320HP AT THE TYRES ON 10PSI
TWIN VG30 BALLBEARING TURBOS WATER/OIL COOLED
HOLLEY PRO JECTION SETUP WITH QUAD 90Lbs INJECTORS
INTERCOOLER WITH BIG CUSTOM MADE BOV
AFTER MARKET COMPUTER WITH ON THE GO INTERCHANGEABLE SCREEN SETTINGS
TRIMATIC GEARBOX (SHIFT KITTED, HEAVY DUTY CLUTCH PLATES, 3000Rpm STALL)
B&M Z GATE SHIFTER
NEW VL TURBO DIFF
SURGE TANK,TWIN FUEL PUMPS AN MALPASSI FUEL REG.

COMPLETE NEW CUSTOM INTERIOR
BRIGHT RED TWO PAK PAINT
ROLL CAGE
2X 7.5 INCH LCD TV SCREENS
LANZAR COMPETITION DVD PLAYER
12INCH SONY XPLOD SUB
1000WATTS BOSS AMP
ALL MATCHING GAGES



This post has been edited by Taj666: Apr 15 2009, 12:19 AM
 
Boosting180
Post #2

Does it have Vtec?

Taj666
Post #3

QUOTE(Boosting180 @ Apr 15 2009, 04:26 PM) [snapback]1283907655[/snapback]

Does it have Vtec?


lol wats that?? not to sure..

Stompy
Post #4

oh lawd.

if you dont even know what vtec is then you cant be that much of a car enthusiast.

maybe get an excel?

QUOTE
lol wats that?? noy to sure..

Taj666
Post #5

QUOTE(Stompy @ Apr 15 2009, 04:44 PM) [snapback]1283907741[/snapback]

oh lawd.

if you dont even know what vtec is then you cant be that much of a car enthusiast.

maybe get an excel?


yea what ever u said dude..i have a bloody R32 skyline fuck what u said...

Angry_Clown
Post #6

I wouldn't pay $2 for it but thats because I hate Holdens!!!!! (bring it on) but I can appreciate the time, money and effort that has gone into that car and to be honest I think its worth more!

Purplehorizon
Post #7

stick with you're Skyline

PIG208
Post #8

Not bad, i like how they have fitted useless tv screens where the harness' should mount too


What kind of power does it make?

I'd say it's worth it "IF" everything it checks out mechanically and runs well.

If you are looking at buying it, i would suggest sighting receipts for things such as the gearbox rebuild, what kind of engine work has it had done in preparartion for the forced induction?

Boosting180
Post #9

QUOTE(Taj666 @ Apr 15 2009, 04:54 PM) [snapback]1283907782[/snapback]

yea what ever u said dude..i have a bloody R32 skyline fuck what u said...

bowrofl.gif

Taj666
Post #10

QUOTE(PIG208 @ Apr 15 2009, 05:42 PM) [snapback]1283908050[/snapback]

Not bad, i like how they have fitted useless tv screens where the harness' should mount too
What kind of power does it make?

I'd say it's worth it "IF" everything it checks out mechanically and runs well.

If you are looking at buying it, i would suggest sighting receipts for things such as the gearbox rebuild, what kind of engine work has it had done in preparartion for the forced induction?



IT HAS 320HP AT THE TYRES ON 10PSI

Mosquitocoil
Post #11

Personally I wouldn't pay that. I don't know if it's worth that but I'd stick with your 32 mate.

I just like skylines over old commy's, that's all.

Having said that, that VL does look neat and tidy, and has definately been looked after.

Twist
Post #12

QUOTE(Taj666 @ Apr 15 2009, 06:20 PM) [snapback]1283908367[/snapback]
IT HAS 320HP AT THE TYRES ON 10PSI

WHAT ARE WE YELLING ABOUT ?

V8 Turbo > Rb20 shitter. It'll beat you in reverse.

Stompy
Post #13

QUOTE(Taj666 @ Apr 15 2009, 04:54 PM) [snapback]1283907782[/snapback]

yea what ever u said dude..i have a bloody R32 skyline fuck what u said...


Oh wow. you mean you purchased a 20 year old nissan with a fluro engine bay?!!?

My apologies good sir, it appears you are a true car enthusiast. would you mind rebuilding my engine for me? thanks a bunch! dont worry it isnt a vtec so you wont get confused by it. thumbsup.gif

B Unit
Post #14

I would be finding out what if anything has been done to the motor, such as lower compression? Rebuild? Who by? Is this whole build just a backyard job or do they have receipts from a credible workshop?

Take a good look to see if the car is legal, BOV plumbed back, any mod plates if it's been an engine transplant V8 into a 6 model.

I thought you would get more power than that from a Holden V8 with small twins.

BrockSSeacer
Post #15

IMO it seems like it would be a good deal. alot of money has obviously been spent. if it came with a dyno sheet to prove the power and some receipts for the work completed to the engine so you know it will handle that power and not shit itself the first time you gave it some, then you might have found youself a good cruiser/drag strip car.

with twin turbo there will obviously be alot more power to gain, i think it should be able to get up round the 500hp+.

Pattax
Post #16

QUOTE(Taj666 @ Apr 15 2009, 06:20 PM) [snapback]1283908367[/snapback]

IT HAS 320HP AT THE TYRES ON 10PSI


10 PSI? Man the godamn cannons.

OT. No.

Plus the harness bars wouldn't pass a RW.

Taj666
Post #17

yea it hasnt got complianced plate and i think it was done at a workshop...

youbUTEless 33
Post #18

i think it looks pretty good

clutch-monkey
Post #19

QUOTE(Taj666 @ Apr 15 2009, 04:54 PM) [snapback]1283907782[/snapback]

yea what ever u said dude..i have a bloody R32 skyline fuck what u said...

wait, didn't you have that starlet? now you've sold that for an R32, now you're gonna buy this? lol you go through cars fast.

why not just buy the right one in the first place mamoru.gif

mark1414
Post #20

Why does the car have turbos from a 3L motor on a 5L???

No I wouldn't.

lostheadcase
Post #21

QUOTE(Taj666 @ Apr 15 2009, 05:50 PM) [snapback]1283908367[/snapback]

IT HAS 320HP AT THE TYRES ON 10PSI


laugh.gif

A naturally aspirated 5 litre can do that...

But with all due respect, you give the impression of severe stupidity and should probably burn your Datsun before you cause yourself grief.

QUOTE(mark1414 @ Apr 15 2009, 07:52 PM) [snapback]1283909192[/snapback]

Why does the car have turbos from a 3L motor on a 5L???

No I wouldn't.


VG30s are a pretty common choice when it comes to V8 turbo conversions.

Wandzz
Post #22

QUOTE

I'd say it's worth it "IF" everything it checks out mechanically and runs well.


^ This.

Otherwise you'll get owned by a car that was built to sell. (Aka. Backyard betty).

metallibanger05
Post #23

hell yes thats cheap mate, you would never find a calais turbo that good for ten grand, dont listen to dickheads that are holden bashers.because their only gonna diss it because its not a nissan. if it was an r31 that looked that good and made 320hp then every1 on here would love it, make your own dessision, if your after something like that imo youve found it

Ma77Y
Post #24

Mate if it is that cheap there is a reason

320 hp @10 psi is only 238kw... it just doesnt seem right now do it??

Personally i wouldnt touch it. ( i dont mind older holden v8s ) so i am not holden bashing.
But would u sell a car with all that for that little......??

But seeing as you own a r32 (which are more common then most vls now) you are a true car enthusiast i never knew that is what happened when you bough cars like that.... hmmm I guess we all learn something new everyday.

Vegas
Post #25

Power does not mean much with V8s its all torque.
And wtf is the go with the role cage and tv screens im shure that is not legal because if you stop fast people will loose teeth.
But oh well its a old holden they probley dont have teeth to start with.

nissanetturbo
Post #26

so many jealous people in this thread, jesus

Vegas
Post #27

QUOTE(nissanetturbo @ Apr 16 2009, 09:11 PM) [snapback]1283915273[/snapback]

so many jealous people in this thread, jesus

Please Explain.?
Jelious how he is not the owner.?

VTs russ
Post #28

it would definatly be worth it, if mechanically it was in good shape, but why would someone spend all that money in the first place, to sell it under priced, there will be something mechanically wrong with it for sure, or it'll cost thousands to get the thing on the road again.

get it inspected by a professional, if it all sounds positive you've found yourself a good buy, but this is unlikely if it can even be registered at all, street commodores magazine published an article a couple of months back on turboing a 5L, didn't seam to difficult, low power could be the result of a backyard job.

nvrl84ad8
Post #29

Fuck 10k seems fairly reasonable to me, People are selling stock vl's with calais front and ebay bolt on turbo's for 5k+ every day of the week.

OT: Stick with the r32

Brett
Post #30

buying someone elses problem, dont learn the hard way

Zirtech
Post #31

i wouldnt touch it with a 10 foot pole with your knowledge mate...

do some research learn about the car...

OR buy it...and when something breaks dont complain on here

Tommydrifter33
Post #32

looks awesome. biggrin.gif

Taj666
Post #33

QUOTE(Zirtech @ Apr 18 2009, 01:43 AM) [snapback]1283921515[/snapback]

i wouldnt touch it with a 10 foot pole with your knowledge mate...

do some research learn about the car...

OR buy it...and when something breaks dont complain on here



You're a fuckhead mate, read the add properly

004dam
Post #34

QUOTE(Taj666 @ Apr 15 2009, 04:54 PM) [snapback]1283907782[/snapback]

yea what ever u said dude..i have a bloody R32 skyline fuck what u said...




your my ride secction has a commo wagon :\

god
Post #35

dont know if its just me, but, why would they install turbos onto the standard manifold. you'd think because they have put a lot of work into the look of it, they'd have spent the time and money to atleast get a custom manifold made up to improve the HP of the car.

personally, unless you are willing to risk the thing blowing up on you, i'd stay well away from it.

cant judge a book by it's cover. may look nice on the outside, but what's the engine like etc etc.

my2cents

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 1 of 2
Jump to page
THIS TOPIC HAS BEEN ARCHIVED
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
Loading...
x