Login
22nd August 2008 - 12:29 AM
 |
turbomarch
Post #72
wow! you paid $280 for that cat and then had it butchered like that by an exhaust shop |
|---|
mad conversion... the 1uz is getting more and more popular... let us know how it goes.. my g/f's celsior is slow as (1uz), but that said... it also weighs about as much as 2 180's
 |
|---|
 |
brind0g
Post #74
Gearbox cross member was custom made, u can see it in the above exhaust pics... And the sway bar is one i got from nizzpro in nerang |
|---|
|
|
brind0g
Post #76
Might doa single turbo setup when ive had enough fun with the N/A V8... but apart from that not really... if i dont get around to single turbo i have a mate who has a super charger ready to bolt on... |
|---|
|
|
brind0g
Post #82
Rotors and calipers in and half working... There is a heap of sponginess about them... bleed them twice already |
|---|
 |
|---|
|
|
brind0g
Post #85
Yet another vid is up... nothing too exciting.. but worth a look.. |
|---|
 |
1.5jz cressida
Post #86
the best sleeper a mx32 cressida 1967, with a 1uzfe v8 with a garret GT47 made 300rwkw on 5psi, the car weighs 1050kg was gonna buy it but my car didnt sell in time |
|---|
|
|
brind0g
Post #89
New pics will be up soon, relocated the battery, put on the air filter and cut some rubber.. |
|---|
|
|
clutch-monkey
Post #91
looks nice |
|---|
|
|
brind0g
Post #92
QUOTE(clutch-monkey @ Sep 29 2008, 09:16 PM) [snapback]1282939952[/snapback] intake pipe looks kinda short though  Im planning to change the right hand light over to one with the lil opening in it for air... failing that i might utalise the old hole in the front bar from where the intercooler was  |
|---|
|
|
brind0g
Post #93
Now ive been driving the 180 around for a week now, and there is a few things i have to iron out.. for some reason the power steering is very funny... when accelerating, even just the slightest and turning, the assisted side of things just stops... so i manually have to pull the wheel around to return it to centre... could be a wheel alignment doing that aswell.... or maybe running it without fluid when i was building has stuffed it... |
|---|
looking awesome, can't wait to see it in the metal! |
|
|---|
|
|
|---|
|
|
brind0g
Post #98
The car still is 100% finished.. Been rather busy with Bathurst and Indy... But i have been ironing out bugs... One of the bigger things that is really frustrating me is the 30amp fuse for the thermo fan keeps blowing.... causing the car to over heat rather quickly and blow out all its radiator juice!! NOT HAPPY!! So for the moment ive just ripped out the fuse all together... will have to re-wire i think... |
|---|
|
|
brind0g
Post #99
Well the car is nearly finished, picking up an analog dash this arvo, then waiting on speedo cable... Once that is all in, just gotta replace some rear subframe bushes and raise the sway bar a bit... its hanging at about 70mm from the ground at the mo. |
|---|
 |
BALSAK
Post #100
QUOTE(LXS-180 @ Apr 9 2008, 09:39 AM) [snapback]1282164008[/snapback] hey Guys n Girls... After seeing the gathering at the spit on Sunday arvo i really wanted to join the club as im a local for the gold coast and just baught my new ride. Its a 180sx (dont judge me yet!!  ) but i have plans for it...1UZFE... Thats right kiddies... a 4L, Quad Cam, 32 Valve V8 My mate has a Mazda MX5 with this motor currently in it, along with an RX7 (series 5) 5 Spd Manual in it, being managed by a Motec Computer... He wants to upgrade as he says the 4L isnt big enough, so he will probs be putting in a 6L LS2 or sumthing like that... Hes going to sell me his motor, gearbox, and computer for $3.5K and help me install it for not too much more  This wont be happening till around July as a few weeks ago, he got attacked by a widow maker (9" angle grinder) and completly severed all the tendons for his fingers on his right hand. And tendons dont have a blood flow, so they take a while to re-gain all their strength Apart from the motor conversion, i dont want the car to be too over the top... thinking of doing some sort of light conversion for the head lights as i dont realy like the pop up lights... Not sure about paint yet either... Any suggestions will be warmly welcomed Hope to meet some of you soon ! Andy B To get rid of the pop up headlights, I'd suggest a S15 front end conversion. A wide body kit would also go nicely, along with some DEEP dish rims. Keep up updated, would be interesting to see one of these with a V8  Just read the rest of the posts.... motor is already in! HOLY SHIT! That is cool Good job |
|---|
 |
gnarlynick11
Post #101
i thought you could keep the digi dash? with part from pintara? |
|---|
 |
|---|
|
Traian
Post #104
QUOTE(brind0g @ Aug 15 2008, 12:29 PM) [snapback]1282739861[/snapback] Heres some more pics.. Just the exhaust as it was being built... didnt manage to get one b4 they took it off the hoist, but im sure ill get another one sooner or later...  This CAT cost me $280!!! :S worth it though And the heatsheild above the cat, is the shitter that cut my hand   Someone missing a trampoline? 
|
|---|
|
|
toyota_celsior
Post #105
Awesome Conversion |
|---|
-
Member Login
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create Account -
Login using your Facebook account!