Cressida - tell me bout urs  

Page 9 of 64
Jump to page
000.PLS (1jcressida)
Post #281

lets get this goin again, this sat is test "n" tune n im very keen to go but wanna kno if any of u guys wanna come????

pig060
Post #282

how are you going with your cressy? have you done any thing more to it? might come watch ya race if you go.

MrDOHC
Post #283

hey daniel, have u or adam taken it down the 1/4 yet

000.PLS (1jcressida)
Post #284

im goin this week end FINGERS CROSSED, adam is doin a 1.5jz conversion, lookin for 500hp+, n 10z, he went down with 393hp n semis but blew the motor, im goin down hopin for 11z, havent done anything but fix the box n i need a re-tune the car is insane alot of performance workshops r sayin its got 400+ so im goin down with semis hopin 11z on street tyres n low 11z on slicks

pig060
Post #285

good stuff i'm getting a few things done to mine now looking for around the 500rwhp mark but ill let you know in the next couple of weeks how it go's. still waiting for my stall to come from mv auto so ill be putting that in too.

000.PLS (1jcressida)
Post #286

how big is the stall????

pig060
Post #287

3500

000.PLS (1jcressida)
Post #288

just like me this box iv got now has the same stalle, the exact same box as mine has got another cressy down to the high 9z, so just need to keep the power down

pig060
Post #289

yeah but i think the diff will be the next weak link. once its been tuned ill be heading out to willowbank for a play to see what it will run.

000.PLS (1jcressida)
Post #290

i have lock diff lol

pig060
Post #291

i did have a spool in mine but i got sick of it so i put in a 4pinion lsd, much nicer to drive but i dont think a commodore diff is going to like around 500 hehehe

MRT78
Post #292

i should be going this weekend il get some video footage of it all..

Also if any of you are looking for a manual conversion im selling my rebuilt R154 5 speed box just pm me for details.

pig060
Post #293

are you hoping for traction this time? lol what time should you be doing? any idea?

000.PLS (1jcressida)
Post #294

mine 11z

mrt78 13's lol get traction

MRT78
Post #295

nah i wont be in my car it still needs the new gearbox and i cant get it until someone buys my old one

000.PLS (1jcressida)
Post #296

awwwwwwwwwwwwwwwwww, il cry with u, i got another fine in the cressy it looks stock n i still get hassled

'JayRad
Post #297

^^ yeah dude what happened? i saw you pulled over outside parklands with the hektic undercover typhoon.

what you do to get pulled over? or the cops just power tripping?

MrDOHC
Post #298

QUOTE(000.PLS (1jcressida) @ Mar 28 2008, 11:58 AM) [snapback]1282106388[/snapback]

awwwwwwwwwwwwwwwwww, il cry with u, i got another fine in the cressy it looks stock n i still get hassled




no it doesnt :P

do u still have the 19's on it????

000.PLS (1jcressida)
Post #299

i got done for drivin in the right hand lane for no reason, i have to stay in the left hand lane unless over takin, 2 points n $45, but takin it to court, cos i was in the right hand lane goin to turn next right

p.s no more 19z im cruising on supra 16z 245 wide

MRT78
Post #300

what did ya get at the drags?

Twist
Post #301

QUOTE(000.PLS (1jcressida) @ Mar 28 2008, 05:55 PM) [snapback]1282107917[/snapback]
p.s no more 19z im cruising on supra 16z 245 wide

Thats a decent width. How wide were the 19's ?

MD0086
Post #302

what times you run on saturday Mr Dan?

000.PLS (1jcressida)
Post #303

QUOTE(Twist @ Mar 30 2008, 08:12 PM) [snapback]1282115527[/snapback]

Thats a decent width. How wide were the 19's ?

they were 245 aswell

QUOTE(MD0086 @ Mar 30 2008, 08:34 PM) [snapback]1282115705[/snapback]

what times you run on saturday Mr Dan?



man ran like poo, i only got the best of 13.6 at 107mph
i have 270rwkw i have the box n stalle n the hardware to get me there in 11z, but had dramas with he car

OIM.666
Post #304

Finally got time to change to oil drain around and put the double dump on. Was planning to drop the motor in today but ran out of time. Oh well, Monday will have to do ;)

000.PLS (1jcressida)
Post #305

o sweet cant wait to c it? craig il b gettin that front srtut from u this week???

OIM.666
Post #306

No probs mate.

flyline
Post #307

QUOTE(000.PLS (1jcressida) @ Mar 31 2008, 05:11 PM) [snapback]1282119598[/snapback]

they were 245 aswell
man ran like poo, i only got the best of 13.6 at 107mph
i have 270rwkw i have the box n stalle n the hardware to get me there in 11z, but had dramas with he car



ur only problems were that u have major bogging down on every launch, im never seen so much bogging down.... needs more rpm off the line to get u out of the whole better and theres 0.5second in that...

and ur gearing is to long as u were only half way through 3rd gear when u should be at the top end of it so u werent hitting all ur power, chnage the diff or put more power in....

and stall up more revs then 3500rpm, cars with big turbos launch with nothing less then 5000rpm

fix that and ur got urself the time ur chasing mate

1JZX81
Post #308

i have a 1j now dan, am i cool now? ;)

pig060
Post #309

nah you need a 2j like me hehehe good to see you have a jz powered car ;)

000.PLS (1jcressida)
Post #310

lol i myt b leaving the jz power crew pig060 still interested????

pig060
Post #311

nah sorry been spending to much on my house and not enough on a toy hehehe why you want to get rid of the jz's?

000.PLS (1jcressida)
Post #312

got a new car in my view

OIM.666
Post #313

You fit that bar reo yet Dan?

skitzcressie
Post #314

hey guys any 1 know were i can get a carbon fibre bonnet for my cressie like the ones on drift jxz81

MrDOHC
Post #315

there was a group buy on toyotacressida.net

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 9 of 64
Jump to page
13 User(s) are reading this topic (13 Guests and 0 Anonymous Users)
0 Members:
Loading...
x